Trump leaves Maria Bartiromo speechless after suggesting US is hacking China
Trump leaves Maria Bartiromo speechless after suggesting US is hacking China: ‘You don’t think we do that?’
‘That's the way the world works. It's a nasty world,’ president says during sit-down interviewGustaf Kilander (The Independent)
Oxfam: UK government complicit in war crimes in Israel
Oxfam’s UK chief executive, Dr Halima Begum, expressed disappointment at a British court ruling which refused to halt the export of F-35 fighter jet parts to Israel, which it’s using in its war on Gaza, on Monday. Oxfam submitted evidence in the case.
“The judgment is surprising and deeply disappointing,” Begum said.
“The Court and the Government have both acknowledged that UK arms are at risk of being used in breaches of international humanitarian law in Gaza yet prioritise the supply chains of fighter jets over the lives of Palestinians,” she added.
“It is unconscionable that the Government would continue to license the sale of components for F35 jets knowing that they are used to deliberately attack civilians in Gaza and destroy their means of survival, including vital water supplies.
Syrian forces massacred 1,500 Alawites. The chain of command led to Damascus.
A Reuters investigation found 40 distinct sites of killings, looting and arson during three days of sectarian massacres following an Assad loyalist insurgency. The chain of command led from the attackers directly to men serving alongside Syria’s new leaders in Damascus. The killings now threaten Syria's fragile transition.
Among the units Reuters found to be involved were the government's General Security Service, its main law-enforcement body back in the days when HTS ran Idlib and now part of the Interior Ministry; and ex-HTS units like the elite Unit 400 fighting force and the Othman Brigade.
As the massacres of Alawites unfolded, the Defense Ministry spokesman Abdel-Ghani said publicly the operation on the coast was proceeding as planned with the goal of keeping control of the region and “tightening the noose on the remaining elements of officers and remnants of the fallen regime,” according to the state-run news agency SANA.
Behind the scenes, Abdel-Ghani was running the Telegram chat of militia leaders and military commanders that coordinated the government response to the pro-Assad uprising, according to a dozen text and audio messages in an exchange between him and a senior commander from another faction.
Two people confirmed the Telegram handle was Abdel-Ghani’s and that Abu Ahd is his nom de guerre. Reuters contacted him directly on Telegram at the handle. He told Reuters he has been questioned by the committee investigating the killings but declined to comment further.
Oxfam: UK government complicit in war crimes in Israel
Oxfam’s UK chief executive, Dr Halima Begum, expressed disappointment at a British court ruling which refused to halt the export of F-35 fighter jet parts to Israel, which it’s using in its war on Gaza, on Monday. Oxfam submitted evidence in the case.
“The judgment is surprising and deeply disappointing,” Begum said.
“The Court and the Government have both acknowledged that UK arms are at risk of being used in breaches of international humanitarian law in Gaza yet prioritise the supply chains of fighter jets over the lives of Palestinians,” she added.
“It is unconscionable that the Government would continue to license the sale of components for F35 jets knowing that they are used to deliberately attack civilians in Gaza and destroy their means of survival, including vital water supplies.
Wafrn: a tumblr clone that federates with fedi and now also has opt in native bluesky
adhocfungus likes this.
Challenges meeting new people without an Instagram account
I’ve been trying to meet new friends and new people to hang out with so have been going to a lot of social events.
I noticed that everyone seems to ask for my instagram account and when I say I don’t have one that connection kind of dies, and it feels too personal to ask for someone number when I just met them.
I don’t want to create an instagram because of the privacy invasions of meta but I also don’t want to feel left out when trying to make new connections. Anyone have any advice?
like this
originalucifer, Oofnik, Endymion_Mallorn e giantpaper like this.
like this
Oofnik likes this.
Privacy is subjective. Use it but dont use it for things you don't want Facebook to know about. Don't use it on your phone. Don't use it on a computer with things you care about. Keep it in a container tab in your browser but don't keep it open all the time.
It's kind of a pain but you can definitely be mindful and only give meta crumbs where others are giving them truckloads of data.
Sadly there is a lot of good content on Instagram
Don't use it on your phone
There's also the option of using Private Space (Android 15+) or its multiple clones in manufacturer OSes. It effectively creates a new user profile which can be deactivated at will. The new user profile also has no access to any data from the main profile that can't already be controlled by permissions, like the app list. It has its own instance of Play Services, so AFAIK it shouldn't be linkable to the main profile. It's the best middle-ground I've found this far if the app needs to be installed in one way or the other.
An IG account isn't a phone number or email, and I think it's weird that young people treat it like it is.
Just say you don't do social media, and if they can't respect that, it's a quick test as to if they're your people or not.
like this
Endymion_Mallorn likes this.
like this
Endymion_Mallorn likes this.
Or come across as a weirdo, conspiracy theory, antisocial, tech obsessive nerd.
I mean, it's not inaccurate, but not maybe how to present initially when you meet someone.
That is a good point, when I say I don’t have any social media more than half the time people respect it, almost like I’m saying I’m X years sober from alcohol.
But I still feel like I’m tempted to make an account to avoid this additional social friction. Maybe I won’t use it for anything except getting people’s contact info in these situations. I’m not sure I’m a bit torn.
like this
Endymion_Mallorn likes this.
Maybe I won’t use it for anything except getting people’s contact info in these situations.
This is exactly what I did. I posted like three pics of my dog, and put it on private and never really use it except for that purpose.
I have never used any social media before or had an account on anything else, but something changed and people started treating instagram like a phone number, which is weird to me but 
Don't feel like you must do this, but just wanted to say you're not the only person to do no social media, but felt the need to open an instagram
quick test as to if they’re your people or not
Absolutely... it's like when during job interview the recruiter ask if you code on the weekend. Some people treat that like the absolute worst question ever. Yes, in most cases I would argue it's to probe if you can be abused by working over time for free... but maybe you are into that or rather you do have found a way to make it work, e.g. NOT work during some weekdays. The point is that the question itself is a way to discover BOTH ways, for them AND for you. It is perfectly fine to stop right there and then if any of you is now aware that it's a show stopper because of whatever difference. The entire purpose of dating or interviews is to engage in a more involving relationship ONLY if it's worth it for both. It's a discovery phase, not a "let's close the sale" phase.
I mean again my initial reaction would be that indeed ... BUT it depends. If they genuinely offer say 3x rate, it's on demand from MY side (not the client), double vacations, etc then maybe. Again it has to be something that's actually interesting.
Sadly this is not even .001% the case, usually companies consider the weekend an extension of the week and such cases, they can absolutely go get fucked.
when during job interview the recruiter ask if you code on the weekend
I think it's more to see if you're actually passionate about what you do and you don't "just" do it for work, which definitely is a bit of a twisted view, when on average you'll already be spending 40 hours a week doing that, but I think people tend to make this sort of evaluation, because people who love programming so much to also do it on their free time will usually be better, since they simply have more experience than those who only do what they're assigned to do
If it's such an obstacle for social life, I'd just give in and make an account. Given the alternative is "exchanging phone numbers" (with the intent to text or call, presumably) I'd say Instagram is no worse privacy-wise - both offer absolutely no privacy protection. If a phone number is required to register (I don't know if it is), I'd get a bootleg sim specifically for it. I would treat all communications on any proprietary platform (even 1-on-1) as though they are happening in public (Twitter-style). Avoid using apps if at all possible as they have more access to your device. If that's not possible, at least do not give those apps any permissions, however hard they are trying to eek them out of you. Do not use it for anything but chatting with your acquaintances - merely looking at your feed, even without any explicit interactions like opening a post, gives Meta a lot of data about you.
If the connection moves on from "acquaintance" to "friendship", perhaps try pushing them towards a better platform - I recommend Matrix as it is federated (unlike Signal), and has pretty nice clients/UX nowadays (unlike Tox and XMPP), and is e2e-encrypted (unlike almost everything else).
like this
Endymion_Mallorn likes this.
like this
Endymion_Mallorn likes this.
Back when Craigslist had personals ads I answered one saying that I had 10 laptop computers and no facebook account, and I actually got a couple of dates that way. Not everyone wants corporate media.
I've been chatting (non romantically) with someone I met on another forum, who is about the same way. No facebook or reddit or anything, not even Lemmy, just a few niche forums.
like this
Endymion_Mallorn likes this.
like this
Endymion_Mallorn likes this.
This is, IMO, the biggest problem with FB and IG. They've replaced personal connections. I know some women who say they won't date anyone without an IG account.
and it feels too personal to ask for someone number when I just met them
Someone's number is literally just a series of digits. Social Media has their fuckin' life's story. I'd say it's far less personal.
like this
giantpaper likes this.
I think it's mainly two things:
- people fear reverse phone numbers look up tools more then the equivalent tools for social media.
- It's viewed as less replaceable then just blocking somone on social media
I don't really agree with either of these but it is what seems to be common.
like this
giantpaper likes this.
Get a new phone number and never sign it up on anything. It is very easy to replace a phone number. If you have had a phone number for multiple years and signed it up multiple times and still using it, it is time to change it now.
Blocking somebody on social media doesn't really mean anything, they still have your account, can still see your posts, comments, and even liked videos if they use another account. You would have to delete your account if some random person has your personal Instagram that you don't want anybody knowing, even if it is private.
They both have there downsides though.
yeah i feel you. I'm in a band, so instagram is basically a necessity for promotion and communication. getting the word out about shows, other bands will message me for gigs etc
just try to use it a little as possible, and try to lock it down as much as possible in the os. you can do alot in the android app settings.
basically treat it as you would having a conversation near a security camera.
The band TOOL literally never did any interviews before (or after) the internet.
Worked well for them.
Anyone have any advice?
Yes: recognize what you’re trying to accomplish and change your actions.
Privacy requires shutting people out of your life. Meeting new people requires letting people into your life.
If people expect that the first “gate” into your life is your social media then meet that expectation. Have a social media presence. Post shit that you want people to see on it.
If you’re afraid of letting the companies that operate social media see your life, examine why. It may be that you’re perfectly fine with the trade off of a limited hang out in exchange for looking normal. Most people are.
It doesn’t have to be instagram. You could have a snapchat or a tiktok or whatever.
I disagree. You are normal if you have social media and not if you don't?
Dunno man, if people need IG to interact with you and you are not comfortable with it, maybe they are not your people, you know?
Why should one go into uncomfortable territory for others, people should interact from positions of comfort, otherwise its a stretch for one side and just a bad time all round.
One thing is for sure @ElectricWaterfall@lemmy.zip , you will have a harder time, make less connections, but I'm pretty sure the ones you will make, will be solid.
One word of advice as a fellow non-socialmedia-person. If you want to meet new people, make sure you are in the same place at a certain time on certain days. That way people know where you might be during certain hours and that is also a way to make connections. Just be sure you like said place.
Social media is literally normal.
It has gone through a process called normalization in order to become an expected part of social interaction. The op even said that people expect them to have a particular type of account and they feel like not having one excludes them from having more friends.
Yes, you are normal if you have a social media account and abnormal if you don’t.
The ol’ sarcasm detectors’ flashing red, ringing the bell and pouring black smoke out of all the panel joints but yes: if you want to fit into society it’s important to have social media.
If you wanted to live a private life in the 1970s, would it be better to descend from your cabin hundreds of miles from civilization with a wild mane of shaggy hair wearing your homemade leather suit or with an unstylish but kempt haircut, nondescript jeans and shirt and military duffel bag looking like any other of the myriad characters wandering the roads at the time?
Obviously you’d want the latter. Part of privacy is blending in so that you don’t arouse interest.
Nowadays if you want to be a private person and still interact in society, like the op, you need to have all the trappings of a someone who doesn't raise alarm bells. That includes, especially as your age drops, social media.
Social media is literally normal.
That's your bubble, not mine and not generally. Social media profiles is something 2010's here, maybe some still have it. What's in now is loose communities like Lemmy or Tiktok and chat apps for irl friends.
It’s also the ops bubble. My replies are generally directed at the op and their post.
I will also point to the requirement though, that us visa applicants give up social media account names or be subject to denial as evidence that it’s considered normal.
If it wasn’t considered normal to have social media then the cbp wouldn’t be so quick to implement that process.
Is this an age thing? I'm about 40 and I never had instagram, barely used facebook, and didn't use any others really. I don't think I've ever had a problem where someone backed out because I didn't have instagram. But I also don't have a big group of casual friends, and maybe that would be harder.
Discord sucks, but I've noticed a lot of social groups use it. A couple meetups I go to all use it for communication. Maybe that's more bearable than instagram?
I’m in my mid-thirties, and while I didn’t have the Instagram/Whatsapp problem as a late teen / young adult, the pressure to use Facebook was similar. When I decided to close my account, it was almost a social death. My friends organised all their outings there and didn’t want to bother reaching out to me. And many of those who did go out of their way to include me occasionally made passive-agressive remarks about how I was being ridiculous and making their life difficult.
That said, I would have loved being able to just say “I don’t have Insta” when men were bothering me in the street. 😀 But I’m sure that wouldn’t stop most of them even now.
Don't worry, I handed out my Instagram to some people who requested it and those connections fizzled out just as easily.
Could be down to me only ever checking it on a designated laptop once a week, but in my opinion, if it comes down to an Instagram account and regular app access, can't even exchange SMS numbers to text, then it's already a tenuous connection.
Funny enough, I didn't even make my own Instagram account. My friend really wanted me to be on Instagram so he went ahead, made it under my name, and handed me the keys. You probably can't do this nowadays due to security checks, unless you're Meta making a shadow profile kinda like my friend did for me. I'm just sitting on the shadow profile that would exist anyway, trying to contribute as little as possible.
Find a way to use Instagram to drive them to another app, like this: lemmy.world/post/21620691
PSA Help others escape WhatsApp using Watomatic auto reply (and how to write it)
watomatic.appExample
🤖 Automated Reply 💬 I reply faster on example.org ⁉️ WhatsApp is anti-libre software. We do NOT control it. It withholds a libre software license text file, like GPL.
ExplainedI reply faster on
Deleting the only way to reach someone online breaks your influence.example.org
A link and only one link, so (1) they see it's an app, not some random word or typo, (2) they can download it without searching, and (3) they don't have multiple choice–they don't need to do any thinking or research. Remove everything stopping them.anti-libre software.
Never say privacy, they've heard it all before (from you, no doubt). Say something different.We do NOT control it.
Make it simple and direct. Think of the most retarded person you know and break it down in a way they would understand. Think about every angle it could be misunderstood.It withholds
Libre software is normal, default. Anti-libre software is cringe, weird, dangerous. Act like it. Also, humans care less about getting and more about losing stuff.libre software license text file
Show them what to check for, for themselves, easily, obvious. Later, show them how to spread these ideas. Then, show them how to show others how to spread these ideas, make more of you.GPL
A keyword for them to web search for more, with better results than more complex terms like AGPL or misleading terms like 'open source'.Don't waste a word.
Lastly, make yourself someone everyone wants to talk to.
Anyone have any advice?
- Ask them for their number, and see how it goes? Worst case, they will say 'no', end of the story. Maybe the will ask why you don't have IG and that will be the start of an interesting conversation.
- Try to meet different kind of people? I mean it seriously. I know a lot of people around me who have IG/Facebook/X and so on but at the same time none of them make it a requirement to use it.
- Use a second phone/number for that crap content only? I barely use my 'real' phone (I have nothing installed on it beside what I'm required to use) still I do own a second phone just so I can easily share a number with all the services and various craps that ask for one. It's a phone I never answer to, despite it being constantly harassed by callers. And that peace of mind (my real number is almost spam free) only costs me the 2€/month (plus the phone, I purchased used). You should be able to do something similar for social networks: have a second phone without anything personal on it, just with IG.
- Accept that you're doomed to use IG because it's with those 'IG people' and no others you want to spend your time with? I like to spend time with people reading books, it's kinda expected we indeed read books. Would I not like to read, I would not spend as much time with them.
It’s a 2 € plan with a 2 € discount because the mobile operator is also my home internet provider. So 0 €/month.
And it’s my one and only mobile number, not an extra one for crap content. The plan only includes 50 MB of (4G) data per month, and I have to pay extra if I go over it, so barring emergencies I’m only using wifi — but I don’t mind not having access to internet everywhere and all the time, I find that healthier in a way.
It's just a perception thing we have, a phone number DOES feel more personal to me, even if most people's Instagram accounts are even more detailed. In my case, I literally never posted anything on Instagram, so there was nothing to gather about me besides what posts I liked.
Plus some people my interpret asking for a phone number as wanting to date them or smth (although the same could be said for any messaging service tbh).
Phone number can be problematic to share in some areas of the world, so it does depend on where you are, but email shouldn't be an issue in general. So easy to get an additional, private email address and use both at the same time.
I also don't have most mainstream social media anymore but have noticed a significant drop in people asking for it these days. Might just be my location in a city with a lot of progressive, tech savvy people, though.
I mostly use phone number and/or Signal these days.
Am Gen Z, and currently in college. Clearly am on Fediverse, and I was never a fan of using IG (only got it cause my middle school friends made me since COVID was happening) and I have completely deactivated my account as of last winter. I have met several people at my college who don't use Instagram for various reasons, and while my other friend is a little disappointed that she can't message them on insta, at the end of the day, we live and move on.
At my college a lot of clubs use GroupMe (owned by Microsoft unfortunately) and we have an official Discord Hub that a lot of clubs are on also. So there's two different methods of communication that aren't Insta that are common on my campus. Some of my friends do have Signal in fact (even my Instagram loving friend), but because more of them don't we unfortunately don't use Signal, even when I beg my one friend who has it. She says 'it sucks and who uses it", but I've never really had the chance to use it to judge her statement as true or not.
Anyway, yeah, you could do a bunch of crazy shit and make fake accounts on Insta to have superficial conversations with people who won't give you the time of day for having an app, or you could just not. It's not that hard to find better friends/people to hang out with, and if you really make a connection with them then they should be happy with any form of communication you offer. Not all Gen Z are adamant Instagram defenders, some even hate it for various reasons (Suckerberg, being data stalkers, promoting bigotry, promoting mental health disorders, etc.)
Just an anecdote, but every time I try to create an account on Instagram I get automatically banned after account creation before even login-in for the first time.
If I recal they then ask me for a copy of my ID to confirm my name is real (which it isn't).
I have no idea how they know, I've tried literally with different residential IPs, different emails and even on brand new devices. On my Instagram user friend's house.
Maybe it's just ~~bad~~ good luck, who knows. In don't need Instagram anyway, just an interesting fact.
You're on the 'privacy' community of an open source and federated alternative social media system designed to avoid corporate control and surveillance capitalism - and you're like "wtf everyone here is very privacy focussed and Linux nerds".
Do you complain about sand at the beach?
The AI Company Zuckerberg Just Poured $14 Billion Into Is Reportedly a Clown Show of Ludicrous Incompetence
The AI Company Zuckerberg Just Poured $14 Billion Into Is Reportedly a Clown Show of Ludicrous Incompetence
The data annotation company Scale AI that Meta splurged $14 billion to take ownership of was reportedly overrun with "spammers."Frank Landymore (Futurism)
like this
Maeve e ☆ Yσɠƚԋσʂ ☆ like this.
The research community already knows this.
Llama 4 (Meta's flagship 'AI' project) was as bad release. That's fine. This is interative research; not every experiment works out.
...But it was also a messy and dishonest one.
The release was pushed early and full of bugs. They lied about its performance, especially at long context, going so far as to game Chat Arena with a finetune. Zuckerberg hyped the snot out of it, to the point I saw ads for it on Axios.
Instead of Meta saying they'll do better, they said they're reorganizing their divisions to focus on 'applications' instead of fundamental research, aka exactly the wrong thing. They've hermmoraged good researchers and kept AI bros, far as I can tell from the outside.
Every top LLM trainer has controversies. Just recently Qwen (Alibaba) closed off their top base models just to spite Deepseek, so they can't distill them. Deepseek is almost certainly training on Google Gemini traces. Google hoards their best research for API models and has chased being sycophantic like ChatGPT. X's Grok is a joke, and muddied by Musk's constant lies about, for instance, open sourcing it. Some great outfits like 01ai (the Yi series) faded into the night.
...But I haven't seen self-destruction quite like Meta's. Especially considering the 'f you' money and GPU farm they have. They're still pushing interesting research now, but the trajectory is awful.
Step 1: Go to an Ivy League school
Step 2: Make friends with a failson/daughter of a prevailing plutocrat
Step 3: Put the Matrix-code screensaver on your laptop (apparently, this worked on Elon Musk in the early Twitter takeover days)
Step 4: ???
Step 5: Get a $10M Series A and a $100M Series B thanks to the family of your rich friends buying into your hair-brained Theranos knock-off.
You know how you have to pay extra to have insurance to pay to take care of your mouth bones and your face balls? Well, what if we did that but with all the bones and stuff? Like, why are your foot bones included in the same insurance that pays for you to have knee bones or neck giblets? Why not do all the bones and stuff a la cart? And then maybe skin can be a premium add-on. We could charge separate for the red goo that's all on the inside everywhere, and then it's like a subscription model for having parts. We can sell it like "don't pay for the parts you don't have," and people will think that they are saving money because each part costs less than the whole, but paying for everything costs more.
-some Health Insurance board member somewhere, probably.
I think there’s better and less racist ways to get your point across here
Edit: my mistake I confused this story with another one that was about mismanaged offshore labor.
How this Microsoft-backed billion-dollar London startup made 700 engineers sitting in India pose as AI tool
Tech News : Builder.ai, once valued at $1.5 billion and backed by tech giants, has filed for bankruptcy after being exposed for misleading investors about its AITOI Tech Desk (Times Of India)
Not racist: “A company was claiming a super smart AI was making decisions but it turned out to be a bunch of people in India doing all the work”
Racist: “haha I bet the AI is really good at phone support because it’s powered by Indians”
Researching making the switch from Windows on my main PC and I have questions.
This PC is basically my life, I use it for work (freelance business), entertainment, and to self host a server so I'm hesitant. I have a handful of questions for now while I look into it more:
- I'd prefer not to dual boo, but it might be the safest way to start? If I dual boot, get used to Linux and (hopefully) get everything I need working, can I then go from dual boot to erasing the Windows partition and recombining so I then only have Linux installed and can keep the work and programs I already installed on Linux?
- I do voiceover work, music production, and digital art/photography. Anyone else here do all this and what programs would you recommened to replace Audition, Photoshop, and Cubase?
--2.1. Regarding music production, has anyone successfully used vst files from Windows on Linux?
- The drives for my server are NTFS. Does anyone have experience with this format on Linux (I use Emby)?
- My bread and butter right now is voice acting so I NEED everything to play nice. I've read there might be some issues with drivers for my hardware, namely Focusrite Scarlett 4i4 and Behringer UV1. Anyone have any experience with this?
EDIT: Wow that's a lot of responses. I'd like to respond to each but I'm a bit overwhelmed with all the info haha. I think I'm gonna grab an old external USB drive and live boot from there and test things out. Thanks to everyone, I've got a tonne to mull over now. Appreciate it!
like this
originalucifer e TVA like this.
I’d prefer not to dual boo, but it might be the safest way to start? If I dual boot, get used to Linux and (hopefully) get everything I need working, can I then go from dual boot to erasing the Windows partition and recombining so I then only have Linux installed and can keep the work and programs I already installed on Linux?
My personal experience says: try dualbooting first, because it will make you to have a working machine continuously. Taking into account that all Linux-based OS behave vastly differently from MS Windows, it is possible to break things, when learning a new way of doing things.
The drives for my server are NTFS. Does anyone have experience with this format on Linux (I use Emby)?
I've been using an external NTFS drive for compatibility and big files storage: works as charm. The worst case scenario is you will need to install an ntfs-3g driver, although it is usually included with the distro.
As for production: I don't have much experience with that, although I can recommend you looking around tooling that solves the problem. You will need quite a bit of patience and trying things, because switching platform will definitely require you to make some shifts in usual processes you have now. Don't expect things to be obvious 100% replacement: unfortunately lots of people have this expectation, and get frustrated.
As for hardware, just looking the model up on the internet with adding "linux", or "ubuntu", or "fedora" should do the trick of figuring out if it will work.
Quick response:
- Yes, what you suggest is possible, but just be careful to backup your data. Burn the
GpartedISO onto a USB and then boot from it. You will then be able to use this tool to delete the Win partition and resize the Linux one.
For complete peace of mind in case something goes wrong, I suggest usingCloneZillato create an image of the drive for backup purposes before messing around with the partition. Of course, you will then need a spare internal or external drive of the same size, or larger, onto which you will save the image...
Grub will easily cope when the Windows partition is removed, but I also suggest installingRefind, which provides a nice interface at boot-time to choose which system to use and also recognizes any changes when partitions are added or removed. You should find the package in the repositories of most distros. - I cannot help with this.
- Linux can handle NTFS. On my Linux server I used Samba to share files on NTFS drives over the network because those drives were removed from my Windows PC at the time . Most Linux distros will handle Samba shares through the
CIFS-utilspackage.
I read that there is no great performance loss between sharing Linux's EXT file system over a NFS network share from a Linux box , and NTFS over a Samba network share from a Linux box, but there is one potential issue as I see it: Linux distros do not have the tools to check NTFS drives for errors. Therefore, if a powercut was to happen, then you may then have to remove the NTFS drives from your Linux machine and go find a Windows machine to check the disks and correct any errors. I coped with this for a few years before deciding to create new EXT4 partitions and copy the data across from the NTFS partitions. I recommend that you employ a similar migration strategy. - I cannot help with this.
Good luck! The learning curve is steep and somewhat mindblowing, but very satisfying too - and you'll maybe catch the Linux server admin bug (disease?) and want to go deeper into that rabbit hole....
- Dual boot should be ok. If and when you decide to fully switch, I'd say it's better to do a reinstall. Messing with partitions always comes with disclaimers. A bit advanced topic if you are interested: when you resize partition usually data needs to be moved, depending what you do with it, so it will wear your ssd; also you should be aware that you must install windows first, Linux second because windows doesn't really play well with others and be sure NOT to format EFI partition when installing Linux.
You have alternatives to dual boot: VMs. Run Linux on bare metal, then boot up a VM if you need something only windows can provide. Gnome has a new VM tool incoming.
- No idea for audio, but Photoshop has alternative, gimp. Wether you like it or not, it's another story (people I know really really hate that one). For digital art there is a tool called Krita that runs on kde. People really enjoy using it.
- NTFS has one thing that Linux doesn't really like - it is case insensitive. Linux normally works with case sensitive filesystems. There was recently a rant by the Linux overlord about case insensitive filesystems, so you might want to stay clear of it. It's ok to use it on a thumb drive though.
Edit: minor typing fixes
I would dual boot first. I'm doing that myself at the moment with Pop OS. I disconnected my existing drives leaving just the drive I'd install Linux to. Ran the installer, then reconnected. I hit f12 at boot to select startup. I did this to avoid dealing with grub or messing with the windows bootloader. I haven't had good experiences with it in the past.
My biggest problem with trying Linux at the moment is I have a USB audio mixer that Linux refuses to enable. I can tell it sees it, it just won't list it as a selectable audio device or send audio through to it. So I have no sound.
There is software for all your uses on linux, but I would start by using those apps on your current setup to get used to the workflow.
Changing from windows to linux can be really tough but it can be made a lot easier if you are already using programs that work on linux before you switch.
+1
I learned Inkscape / Scribus / Krita (which was not easy after 15+ years hooked on Adobe BS) while still on Windoge, had used Linux before so the switch was really painless.
like this
TVA likes this.
- Definitely dual boot, especially if you're new to linux, and double-especially if this is what you use for work. You are likely to run into situations where shit just doesn't work and you need a fallback environment to operate in while you figure out what that's about and how to fix it. Likewise, you will run into software that runs badly on linux or just doesn't run at all even under wine/VM, and it will be nice to have that fallback for when you don't have time to fuck around and figure out what the problem is and need to just get shit done. If things go well you will find very quickly that you don't need it and can probably go ahead and delete it after a little bit, but at first you want that lifeboat. Mine stuck around for 2 weeks, but I only even used it the first couple days and the rest was 'maybe I'll run into some weird situation...' and just not needing it. As for merging the partitions and such, I believe that's possible, but you definitely want to make sure you have backups before you try it just in case. There are many good cloud backup services that have linux native clients (I use filen.io myself.)
- I've never even touched music software so I have no idea what's out there. I do however know about a great website called alternativeto.net that lets you find alternatives to existing software, and you can select your platform to limit it only to linux software. For example, here's the entry for linux-native replacements for Cubase (it was the obscure one from my perspective, wanted to see if they actually had anything, turns out they do.)
- Yes, NTFS generally works mostly fine on linux, though there are a couple of weird cases where it causes problems (one I ran into was adding games I had installed on an NTFS drive for windows to Steam on linux, it was very wonky.) After nuking my windows boot drive I went through and copied all the stuff off my NTFS drives and reformatted them to btrfs before putting the data back on them to ensure that everything would work smoothly, but if you're just using it for regular file access you should be fine. The one caveat I would add is I would probably not recommend editing large projects in files on NTFS drives in linux if you can avoid it, but poke around google and see if you can find people reporting issues with your specific software/use-case to see if there are any problems with it.
- Drivers for weird hardware are potentially an issue. Looks like there is a FOSS driver for the Scarlett, didn't see anything at first glance for the Behringer, but also again I have no idea what I'm looking at here so this is something you're going to have to do some research on. I have had some weirdness with audio in general on linux, things cutting out unexpectedly, stuff like that, but that's strictly games/discord/that sort of thing, so it might be worth looking for stuff other people have posted about doing heavy audio work on linux to get an idea for what to expect. I'm sure it can be made to work, but it might require more fiddling than you expect.
Either way, welcome to the party. 😀
Support for Focusrite Scarlett audio interfaces on Linux
If you’re into music creation, chances are you’ve heard of Focusrite Scarletts—they’re practically a staple in the industry. But here’s the kicker: while they’re adored by many, official support from Focusrite is limited to Windows and Mac users.Raffael Rehberger (🤬 blog.rtrace.io)
Actually the safest thing is probably to choose a main system and run the other in a VM like with VirtualBox. For you, you could just install VirtualBox on Windows then Linux inside of a VirtualBox VM. Windows does have a builtin Virtualization solution too you may be able to use, but I have personally never done that. Keep in mind too that VMs are not as performant as bare metal. For video probably NO, for images fine, for audio maybe but you'll have to see if you get the real-time timing you need in a VM. Good way to play in any case. 2nd best if you have a workstation, not a laptop, you could put in a hot mount SATA drive enclosure, and just swap in the drive you want and get full bear metal performance. Dual boot takes some tech skill. Be sure to back everything up if you do that. Should do that anyway before fiddling. Also if you use bitlocker and secure boot make sure you have all your recovery keys and know how to work with your bios settings too.
Maybe I am missing something, not sure why you care about NTFS. If this is a separate computer you don't really care about that, just the sharing protocol (SMB for example). If it is on the main box, then you'd probably convert this to Ext4 or something similar. No reason to stick with NTFS with Linux. There are a lot of great FS options on linux plus BTRFS, LVM, or RAID to if you want redundancy.
Regarding apps. The alternativeto site is great. Linux has a bunch of audio and photo software. If your a pro, you may not find any of it sufficient. Especially a lot of people cannot do without Photoshop. The common quoted photo programs are GIMP and Darktable. There are many other photo and image programs. Common audio program is Audacity. Again, there are many others. Looks like some handle vst but I have no personal experience.
"This PC is basically my life" screams leave well enough alone. I wouldn't even set up a dual boot on a machine I depended on to make my living. If you do, make sure you've got everything backed up before you start. Nothing should go wrong, but that's a very different statement than nothing will go wrong.
If you want to start using linux I'd recommend you buy a cheap second computer and start there. You can safely experiment as much as you like without risking your professional set up.
like this
TVA likes this.
like this
TVA likes this.
I'm an ex-Windows user and have been using Linux for about 7-ish years now.
If you can handle some downtime, the possibility of some plugins breaking and some time getting used to your new system, you can give it a shot. Otherwise, what I'd more or less recommend is getting a spare computer and just trying Linux out on that. That way you can keep your work computer for critical work while you mess around on the spare.
I checked Cubase on WineHQ, and sadly it won't run via WINE from what I see, so you will either have to look for a different DAW (which will require extra time re-learning everything) or just going with a spare).
If you do plan on biting the bullet and going full Linux on your work machine, here's a couple observations:
The only Windows DAW i've tried on Linux is FL Studio running through WINE. I do have REAPER for aligning audio tracks (it's very good at that) but I haven't really used that enough to become proficient with it. There's also Bitwig, which I haven't used (I checked the price on that when i was kinda on the fence about getting it and oh boy is it expensive! around $800 with the annual upgrade or smth lol).
From my experience, VSTs via WINE (in my case, running through FL Studio 24.2.1), is quite good, although there are is a good bit of jank that comes with it (a few 32-bit VSTs don't work, it's a bit of a gamble honestly) and there are bound to be a couple potential breakages with WINE updates (like what happened today as I'm writing this, I updated WINE and idk if it's just a residual thing but the GUIs on GVST plugins don't render anymore, I can still access the parameters via hovering and looking at the hints panel in FL Studio, but it is a bit cumbersome trying to operate VSTs blindly, especially when they contain things such as waveforms/levels).
Other than that FL Studio's been running like a charm, very very close to (if not native), except for stuff like the Diagnostic thingy not working at all (told you there's jank).
As for replacements, you will need to learn new programs, one which may not contain all the features that you would want (muscle memory can also be a bit of a pain). I'd start out with maybe trying out Audacity and GiMP/Krita on Windows and try learning and getting used to the workflow of each on your existing Windows installation before swapping over. I was using FOSS programs like GiMP/Audacity beforehand so the transition was easy once I swapped over. FL in WINE back then was a little more finnicky but most of it still worked so it kept me going.
If you're still thinking about wiping Windows off of there and going full Linux, good luck, my friend.
I think I still have an 8 track key I can give some one if they dm me.
I'm going to second the comment to leave well enough alone. Do NOT mess with your machine if its what makes you money.
I know you commented you don't have funds for a second computer to test with but that really is the best step for you.
This is especially regarding some of your other details. You are not in for a quick and smooth transition (sorry to say).
VSTs are "sort of" supported on Linux. Basically they're not and there are work arounds that I haven't done using wine for compatibility.
I run a virtual machine for the windows software I am reliant on. So basically my Photoshop etc I use Affinity in a windows VM and it works fine. Depending if you get intensive with your work you might need a lot of resources or experience lag. But for the most part it should be fine.
Look into virt-manager for your VM if you want to go that route.
Besides the VST issue, audio recording will probably give you additiinal problems. I haven't delved into it because he rabbit hole went too deep for me, but from what I've read there tends to be issues with audio in VMs (tremendous lag for one).
But all that being said, there should be a solution for all of your needs. It probably won't be straight forward though given your use cases. I don't want to sound negative with my warnings, I just want to make sure you don't shoot yourself in the foot with your work.
Buy | Bitwig
Buy Bitwig Studio, Producer, or Essentials. Upgrade or renew your license and find the version that's right for you.www.bitwig.com
Ok so I'll just focus on dual booting since there are other thorough replys here.
I really recommend that you DO dual boot but only in a specific way.
When people say "Dual Boot", this can mean two very different things.
A common way to dual boot is to have windows and Linux exist on the same drive by partitioning the drive and installing a boot manager. I strongly advise against this. It's not worth the risk and pain.
Just install linux on a totally new drive and select it as the boot drive from bios. Leave you windows drive untouched.
Linux is much better than it ever has been. There is a very good chance it can do everything you want. But, especially as someone running a business, there will be times when you just need to get something done and will want to fall back to what you know. These times often lead to people giving up and rolling back to windows in a panic.
Just leave yourself a way to instantly and effortlessly fall back into windows as needed and eventually you will end up doing that less and less. Until you don't do it at all and the windows drive gets wiped for more Linux storage.
I was going to suggest something similar. Basically, unplug the windows drive entirely, install linux on a dedicated drive. Then plug them both in and use the bios to decide which one to use. Basically don't have them interact at all. That way, worst comes to worst, you can boot into windows exactly as it is.
If this was a personal machine you use for recreation, I would fully support just dropping windows entirely. But no matter how much I want to support a fellow Linux convert, if you make your livelihood from this computer, I wouldn't risk any downtime that costs you money.
I think I'm gonna grab an old external USB drive and live boot from there and test things out
Just keep in mind, in such a case, that your performance will be quite reduced due to limits on I/O. When you have Linux on a real drive - especially a striped RAID, the system is blazing fast. It’s a substantial difference you should keep in mind when evaluating.
You could acquire a pretty cheap PC for Linux it runs on a potato. Try an electrical scrap heap nearby that you can fossick from or a friend with an old, unused system in storage (even a cheap $20 retro PC from your local marketplace?) to acquire an old retro system. You might not even need a new screen depending what connections your existing screens/TV has and if you could use a cheap adapter and cable from the thrift store.
Linux runs on basically any retro PC and laptop excluding some annoying wifi chips that need planning before the install if you don't have ethernet. Some really old tech may also require specific distributions that still offer support too.
Machines with a 32bit CPU you will want to confirm beforehand if your chosen distribution still offers a supported 32bit install image and retro PC's with obscure expansion cards that perhaps were never supported. This is likely moving into vintage collectors territory though and you would have to be pretty lucky now to find a machine like that super cheap and working.
Solved: Any desktop environment or WM with configurable placing/opening of windows?
When using TMUX, it is easy to create a script, which opens TMUX, configures the screens/panes of TMUX and open/run programs.
I like this a lot.
My baseline would be something like, when I login, some applications are executed and their windows automatically placed on a virtual desktop.
For example:
- Open Firefox and put it on virtual desktop 1
- Open Terminal in fullscreen and put it on virtual desktop 2
- Open VSCode and put it on virtual desktop 3
Something like that is possible with sway, in the environment I am working, sway is not able to run XWayland applications w/o crashing.
Is there any way to have this functionality on Gnome, Mate, Xfce?
Even better would be something to open several windows and arrange them automatically for different work tasks/projects I am working on. Any ideas?
Edit: Solved! Thanks for the input. Auto Move Windows extension for Gnome solves my problem.
KDE window rules can do this natively
Hyprland window rules can also do this natively
Gnome can also do this with extensions as mentioned
Herbstluftwm. It's one of the main reasons I use it.
You can run commands on the command line to create your layouts for one or more desktop (tagged spaces), assign programs to appear on tagged spaces, and then run the programs. Put it all in a shell script and hlwm runs it when it starts.
I use xtoolwait for programs I want multiple windows on different desktops for, like terminals.
I have three monitors; one is a status window, and the other two are grouped together in 8 different tags. Mod4+9 focuses the status screen, Mod4+[1-8] switch the other two monitors in sync to the other workspaces. It's all set up when I log in, including the creation of several terminals each running tmux from sessions restored by trum-session. The only thing I have to do is enter a password to unlock my secrets so background processes can start doing their thing.
Do What You Love
Do what you love, and you’ll never work a day in your life.
My dad used to say this to me. He didn’t come up with it of course. Searching for the source, I see attribution to Marc Anthony. How it came to be a 70-80 year old man was quoting a singer to me I’d bet money he’d never heard, I’ll never know. Maybe he didn’t either.
The basic idea behind the quote is that what you’re doing won’t feel like work if it’s something you love doing anyway. I mean, think of the thing you want to be doing right now instead of reading this post. Your favorite thing in the world. Now, along comes some idiot who offers to pay you to do that very thing! How can you possibly say no?
There’s a darker aspect to this quote that I don’t think people consider though. If you take the thing you love and do that for work, you’re turning what you love into a job. This is a trap that I’ve fallen into. Multiple times.
Do What You Love
Mostly The Lonely Howls Of Mike Baying His Ideological Purity At The Moonmikestone.me
Seems like an odd place to post this but I'll bite.
Even the things I love doing involve work. If I want to do some sewing I still need to tidy up before and afterwards, for example, or spend time pinning stuff (and then taping up the numerous stab wounds). It's a bit reductive.
Instead I try to get paid for things that require minimal emotional "work" from me - that is to say, things that don't leave me sapped of energy to work on my passion projects. I don't dislike what I am paid to do but I'm not super enthused about it. That means that when I'm done working I've still got the creative juice to work on stuff I actually want to do.
If instead I have to spend my working days pushing myself through stuff then I tend to be left with nothing in the tank, even if I still have time left at the end of the day. Instead I get paid to do something I'm good at but that doesn't usually involve extended periods of advanced problem solving or frequent uphill battles of effort (there's always a bit, of course, it's not a perfect solution!). That isn't to say what I do is easy, but much of the stuff involved is stuff I've been doing for twenty years so is comparatively easy for me.
giantpaper likes this.
If you take the thing you love and do that for work, you’re turning what you love into a job. This is a trap that I’ve fallen into. Multiple times.
Exactly. It gets corrupted by the 10% shittiest customers, with their shitty understanding of others and the world, who end up taking 90% of your time.
I like a good fried egg on sunday morning. How would you like fried eggs every day, we will pay you for it? Oh and the egg comes with poo from the dirtiest most stinky morons we can find. Lucky you.
I see attribution to Marc Anthony
It was around long, long before Marc Anthony. Also, you are being way too cynical. It's really just saying that if ya can, you should try to make a living out of something you are passionate about.
Yes, there are people who love what they do for a living so much, that they never wanna quit doing it. I am one of them. I own my own company.
Think of musicians, or actors. Some of them legit love what they are doing and never wanna stop doing it. My grandfather owned an Antique store. His entire life was that store and even when he was in the hospital, he was trying to get back to his Antique shop ASAP. My father was same way. And it's probably why I own my own company.
New Linux Kernel Drama: Torvalds Drops Bcachefs Support After Clash
like this
Endymion_Mallorn e TVA like this.
Ah, sorry to read - I like the idea of Bcachefs and would have been happy to have it ready for production eventually.
OTOH it seems the recent years I read more about the drama about Bcachefs commits to the kernel, than about any technical parts of Bcachefs.
like this
Endymion_Mallorn e TVA like this.
like this
Squiddlioni, Endymion_Mallorn, Mordikan e TVA like this.
like this
Endymion_Mallorn e TVA like this.
There is no reason that Kent Overstreet needed to do this.
I love bcachefs but I am so angry at him for making this happen.
like this
Endymion_Mallorn e TVA like this.
There is in this case, and why Linus did accept the patch in the end. Previous cases less so though which is why Linus is so pissed at this one.
The reason for this new feature is to help fix data loss on users systems - which is a fine line between a bug and a new feature really. There is precedent for this type on thing in RC releases from other filesystems as well. So the issue in this instance is a lot less black and white.
That doesn't excuse previous behaviour though.
like this
TVA likes this.
If he cant communicate with linus as to why his patch is actually bugfix then he cant contribute to the kernel.
My uneducated kernel take. Flexibility is acceptable and desirable in small projects or low impact projects.
When the majority of the internet and a good chunk of PC are dependent on your project, predictability and stability is much more important than flexibility.
like this
Endymion_Mallorn likes this.
Reading all the comments (between Kent and Linux), the problem is that the bcachefs dev thinks that his project (the filesystem) is the critically important one and that the Linux kernel needs to bend to his will.
I am a bcachefs user but it is pretty damn obvious to me that the production Linux kernel is more important than an experimental filesystem.
like this
Endymion_Mallorn e TVA like this.
Yeah, this one is on Kent... again.
He posted on Patreon that there'll be a DKMS module. In my opinion, this should have been the option from the very beginning and upstreaming at a later point in time. It would have avoided a lot of drama. And now bcachefs is kind of tainted. The only way I ever see it back in mainline is there is an independent downstream of Kent's kernel that has no connection to him whatsoever.
Shame because I had very good experience with the filesystem. Definitely better than when btrfs was new. But Linus is unfortunately right; Kent is unable to follow agreed collaboration rules.
Unfortunate situation that could have been avoided entirely. Though I don't want to be too harsh on Kent. He spent a lot of time and work on bcachefs and it's his most important project. As such, he's more passionate about all of this. But the same can be said for Linus and the kernel on the other side.
like this
TVA likes this.
like this
TVA likes this.
Anyone else here actively put off by Linux drama and headlines like "Torvalds Drops support After Clash!"
EDIT: New rule?
like this
TVA likes this.
Filesystems are incredibly antiquated, and while I don't agree with Kent's attitude, it is very important in the long run that filesystems catch back up.
As it stands just about any enterprise system you can poke a stick at is rolling their own customised file storage system, with a traditional filesystem typically being a misshapen dead weight sitting somewhere in the middle of it - existing because it's the only thing the kernel can integrate with.
It is pretty important that this trend reverses, and bcachefs was a big step in the right direction. Unfortunate that Kent is the way he is.
like this
TVA likes this.
like this
TVA likes this.
At the very least, it would be far more of a circus, as the follow-up articles would read "LINUX KERNEL CREATOR LINUS TORVALDS MAKES DEVESTATING REPLY TO FOSS DRAMA!"
But yeah, I think shit like that would just make devs want to go work for a company, because at least when they make a shitty closed sourced, exploitive program people are mad at the company, not them, specifically. They don't have to deal with this shit.
like this
TVA likes this.
Elon Musk’s ‘America’ party could focus on a few pivotal congressional seats
The new US political party that Elon Musk has boasted about bankrolling could initially focus on a handful of attainable House and Senate seats while striving to be the decisive vote on major issues amid the thin margins in Congress.Tesla and SpaceX’s multibillionaire CEO mused about that approach on Friday in a post on X, the social media platform he owns, as he continued feuding with Donald Trump over the spending bill that the president has signed into law. On Saturday, without immediately elaborating, the former Trump adviser announced on X that he had created the so-called America party.
“One way to execute on this would be to laser-focus on just 2 or 3 Senate seats and 8 to 10 House districts,” wrote Musk, who is the world’s richest person and oversaw brutal cuts to the federal government after Trump’s second presidency began in January. “Given the razor-thin legislative margins, that would be enough to serve as the deciding vote on contentious laws, ensuring they serve the true will of the people.”
Ross Perot already tried this gambit. Billions of dollars can't buy a political party starting from scratch. Musk has always been more successful as an investor who turns around and claims to be the founder.
Not to mention, Fox News will no doubt find any snippet they can to tear him down after being the golden boy for a while.
I point this out because I think he can only pull from non-MAGA conservatives, and I've no idea what his approval rating is amongst them. The rest of us know he's a drug-addled Nazi.
A phased start makes logical sense instead of trying to build out a 50-state network Day 1. But I see no way to critical mass, even at the congressional district level, for a win as opposed to being a spoiler.
Elon Musk’s proposed new political party could focus on a few pivotal congressional seats
Billionaire said his ‘America party’ would try to turn attainable House and Senate seats to decide major issuesRamon Antonio Vargas (The Guardian)
PipeWire 1.4.6 Adds New Option to Disable RAOP, Improves the ALSA Plugin
PipeWire 1.4.6 Adds New Option to Disable RAOP, Improves the ALSA Plugin - 9to5Linux
PipeWire 1.4.6 open-source server for handling audio/video streams and hardware on Linux is now available for download with various fixes.Marius Nestor (9to5Linux)
It is great. I actually was a heavy critic of pulseaudio and stuck with ALSA on my desktop for as long as I could (until last year) by using Gentoo with USE="alsa -pulseaudio", the X-Fi's hardware mixing and automatic S/PDIF passthrough.
I tried to switch to pulseaudio a couple of times whenever I read one of those "it's good now, trust me bro" articles, but it wasn't, ever. It had and still has a huge amount of hard-coded, opinionated, often perplexing, behavioral quirks that made it feel like it just fought me every step of the way.
Pipewire on the other hand does not only have saner defaults, almost everything is softcoded with a great Lua plugin API. Don't like a default routing choice or want to automate your own, Wireplumber got you covered. Last year my X-Fi failed (or rather got flakey) and I had to choose between buying another used one or moving to PW. Almost everything worked out of the box on PW the way I like it, except a few details which were almost all covered by the settings. For the last problem, encoded streams not clearing the output, I wrote my own routing plugin.
The documentation for that API isn't necessarily the best, but it's easy to start from something small and work your way to understanding how to get the result you want.
GitHub - lucius-martius/wp-clear-for-passthrough: A wireplumber linker script that clears output devices for passthrough streams
A wireplumber linker script that clears output devices for passthrough streams - lucius-martius/wp-clear-for-passthroughGitHub
If it's a pure DAC, it's default output will likely be between 1 to 2 Volts RMS. If your listening on iems or ~30 Ohm headphones that is gonna be crazy loud. It seems like you are using digital audio control to manage this (i.e., the audio level in your DE), which is possible, but certainly not ideal. It also is kinda bad for the audio quality, as you are digitally remixing it, and if you ever switch to high impedance headphones (or already have), the output current will be sub-ideal.
If I'm assessing your situation correctly, then this is quite easy to solve though. You just need a preamp! This will give a nice knob to control audio with much more precision and finesse. I know that both JDS Labs and Schiit Audio offer headphone amps with built in preamps in the USA. I can highly recommend the JDS Labs Atom Amp 2. In Europe your a little more limited, but FiiO has some nice options I think.
Of course none of this is necessary if you don't want audiophile levels of quality, but it would boost the audio quality (presuming your DAC doesn't have a proper preamp), and would certainly give you a tactile, wonderful knob.
I can certainly attest that my HD600s sound quite a bit better out of a JDS Labs Atom Amp 2 than out of just my DAC or—god forbid—my Mobo audio... They sound even better out of my vintage 100W Onkyo amp, of course, but really not by much. I am really impressed by the Atom Amp. I initially just bought it for travelling, but it has now basically become my main amp lol.
Okay, ramble over.
RAOP stands for Remote Audio Output Protocol and is the key to enabling Airplay on Linux
medium.com/@ed.sav/enabling-ai…
Enabling Airplay from Linux - Edwin Savarimuthu - Medium
Apple eco system esp when it comes to music works well for those who are fully in it. While I like the Apple laptop, my desktop has remained a purpose built (usually by me) Linux workstation/home…Edwin Savarimuthu (Medium)
GUI/App to automate key presses in linux wayland
GitHub - Net-Mist/wdotool: xdotool for wayland in python
xdotool for wayland in python. Contribute to Net-Mist/wdotool development by creating an account on GitHub.GitHub
I know it is not a gui, but until you find one:
it worked quite well to paste the documentation to chatgpt and ask it to make happen exactly what you want.
GitHub - Jmgr/actiona: Cross-platform automation tool
Cross-platform automation tool. Contribute to Jmgr/actiona development by creating an account on GitHub.GitHub
Looks like it doesn't: wiki.actiona.tools/doku.php?id…
I'm actually looking for something like this too because Autokey and pyautogui (and antimicrox on another machine) is the only software keeping me on X.
Dunno if it would meet your needs, but I've been using Input Remapper for binding macros to various key presses and mouse buttons under Wayland. It does prompt for root access, but it's a GUI. It supports any input method, as far as I can tell. It even supports my tablet.
I use it to bind stuff like hold(key(BTN_LEFT).wait(100)) to some button to repeatedly left click while I'm holding that button down.
GitHub - sezanzeb/input-remapper: 🎮 ⌨ An easy to use tool to change the behaviour of your input devices.
🎮 ⌨ An easy to use tool to change the behaviour of your input devices. - sezanzeb/input-remapperGitHub
ydotool.
GitHub - jinliu/kdotool: xdotool-like for KDE Wayland
xdotool-like for KDE Wayland. Contribute to jinliu/kdotool development by creating an account on GitHub.GitHub
Bad issues with system load on Mint Desktop
Hi!. Currently running Linux Mint 22.1, but i suspect it's not strictly a distro issue. This laptop was running VERY well but was outdated, running Mint 19.3, some things were unable to be installed because the system libraries were old (didn't expect Calibre to be one of them, figures), so i updated all the way to that moment's current version which was Mint 21.3. All of a sudden it felt like the laptop got downgraded two whole computer tech generations. As soon as i ask it to do something mildly complicated that made it break no sweat on Mint 19, it gets VERY slow, all the cores start running at max, system load increases, until it finishes doing whatever it was doing several minutes later, something between a couple of minutes when lucky, to 20 or more. Typically what triggers the issue is something on the browser (what i use the most on the computer is browser tabs and lots of terminals) but not exclusively. Thought it was the browser but replicated it on an empty Firefox profile, and has triggered with simpler stuff like the Discord client. Been trying to find the issue for a while trying to avoid a full reinstall, no luck so far.
If i were to describe how it feels, it's like there was a bottleneck on tasks being done by the system, as soon as you ask it to do something mildly complex it chokes on it and tasks accumulate. No idea if it's some kind of kernel misconfiguration, if it's some hardware incompatibility, or something else entirely, checking the changelogs of Mint all the way between 19.3 and 21.3 showed nothing i could pin this onto (or at least nothing i could notice).
The nuclear option would be a brand new blank install but I'd MUCH rather avoid that if possible, made the comfortable but now unwise choice of a single partition for everything (instead of a separate /home and whatnot as i used to do) so reinstallation would wipe it completely, if i must then i must but much rather not.
Would welcome VERY much ideas on stuff to check or try.
Edit: It's got an NVME drive, which seems to be healthy as far as i can see
Edit: When it happens it doesn't seem to matter how much RAM is free, seen it happen with only 8 of the 32Gb of RAM in use and zero swap
Edit: Found a great way to describe how it feels like: Have you done heavy video encoding on a computer that's adequate for the task but not more than that, and noticed how everything in it stalls heavily, even if there's plenty of RAM free and the computer feels like it's giving everything to that task only? Pretty much that, but for nearly everything even moderately heavy
GE-Proton10-6 and GE-Proton10-7 Released
HOTFIX: GE-Proton10-7:
- Re-added the PROTON_PREFER_SDL option. When this envvar is set steam input and hidraw are disabled so that SDL takes priority over controller support.
HOTFIX (GE-Proton10-6):
The wine-wayland patches needed rebasing and needed force pushing due to a problem with a few commits in them noted by the author that can cause some crashing, making GE-Proton10-5 version invalid.
The 10-5 release was reverted due to the force push per the request of the wine-wayland patch set author, thus the version bumped to 10-6. It's one of those view weird instances where you will see a version missing in the releases. (This also happened in the past with media foundation stuff that Valve yelled at me about). Oopsie.
Changelog (GE-Proton10-5):
Nothing too major here, mostly just an update to upstream's code since it's been about 30 days.
- Wine-wayland patches have been updated/rebased, should fix some nvidia crashes, and no longer need this mesa patch: gitlab.freedesktop.org/mesa/me…
- patches added to help with Wuthering Waves.
- protonfixes updated
- protonfix added for Artificial Academy 2
- protonfix added for Persona 4 Arena Ultimax
- protonfix added for Anno 1800 from Ubisoft Store
- protonfix added for Anno 1800
Release GE-Proton10-7 Released · GloriousEggroll/proton-ge-custom
HOTFIX: GE-Proton10-7: Re-added the PROTON_PREFER_SDL option. When this envvar is set steam input and hidraw are disabled so that SDL takes priority over controller support.GitHub
Hopefully with GE I'll stop seeing 130 GB log files from Forza 5. 😂
9950x3d cache optimizations on Linux?
I'm considering getting a 9950x3D on either Monday or Tuesday at a Micro Center as a upgrade to my current setup. My main question is, how is the experience with the 9950x3D on Linux with strange architecture with half of the cores having extra L3 cache and the other half with a normal amount of L3 cache.
I have been busy working and suddenly there's been a promotion for the 9950x3D that I want to take advantage of since my motherboard on my current system has been deteriorating as of late. Asrock x570 Extreme4 with a 3700x. USB has been very flaky and I've been dual boating and the other SSD slot is on the chipset. Which makes my windows boot incredibly slow.
I plan to stay on Arch Linux or hop over to CachyOS but want to know what are your thoughts on this as well?
I primarily game but occasionally do some video/audio encoding, video editing and want to build ffmpeg-full from the aur but takes too long on my 3700X.
I've only been able to read/watch three mediums level1tech, and two Phoronix articles, but haven't mental capacity to register and remember everything.
I watched the Ryzen 9950x3D? On Linux video by Level1tech. And one of the things he mentions is gamemode. Is it recommended.
As for the Phoronix articles one is the review of the 9950x3D and the other is the cache optimization driver.
By default for the Ryzen 9 9950X3D it was using the "frequency" preference as default. But if writing "cache" to /sys/bus/platform/drivers/amd_x3d_vcache/AMDI0101:00/amd_x3d_mode it will prefer using the CCD with the larger cache. This cache vs. frequency bias can all be easily manipulated at run-time for those interested.
Is there some sort of automation for this? Or, do I have to do it manually for each program? I've never messed with kernel parameters other than for my Nvidia GPU to get Wayland to work.
I'm sorry that this question feels very unorganized. I just don't have time to write a proper one. I'll be able to reply on my next break.
Thank you for your help.
AMD Ryzen 9 9950X3D, MSI X870E-P Pro WiFi, G.Skill Flare X5 Series 32GB DDR5-6000 Kit, Computer Build Bundle - Micro Center
Get it now! Find over 30,000 products at your local Micro Center, including the AMD Ryzen 9 9950X3D, MSI X870E-P Pro WiFi, G.Skill Flare X5 Series 32GB DDR5-6000 Kit, Computer Build BundleMicro Center
L3 cache is a hardware level function so unless the application like memtest86+ tells the cpu not to cache, everything is cached.
There are games that is so memory intensive when it comes to IO/s , that the cache plays a smaller role, like “X4: Foundations“.
/sys/bus/platform/drivers/amd_x3d_vcache/AMDI0101 is a global function. You can use ‘taskset’ to set cpu affinity at launch of application.
If it helps, I wrote a KDE widget to switch between the modes: github.com/Steve-Tech/KDE-AMD-…
My understanding is amd_x3d_mode basically prioritises what cores the scheduler will assign tasks to.
I usually keep it on cache since I do a lot of code compilation, but I will usually switch it to frequency for gaming and stuff.
GitHub - Steve-Tech/KDE-AMD-X3D-Selector
Contribute to Steve-Tech/KDE-AMD-X3D-Selector development by creating an account on GitHub.GitHub
keep it on cache since I do a lot of code compilation, but I will usually switch it to frequency for gaming and stuff.
Isn't gaming the most cache-heavy CPU workload there is? The X3D CPUs have consistently topped gaming benchmarks, even outperforming much more modern CPUs that lack 3D cache.
I'd sooner do it the other way around: frequency for compiling, rendering, transcoding, etc. Cache for gaming!
Advice on migrating from Ubuntu server to another server OS
Hi all. I'm currently running a home server using Ubuntu OS, but I'd like to try and explore other options for operating systems to better my skills with linux/unix.
Currently I'm considering switching to Fedora server (though feedback is welcome) because I've been running it as my daily OS for a few months now and I quite like it. I'm also looking at Debian server because that's what my old professor used and he did nothing but speak its praises.
Only issue is I'm concerned about data loss from moving the installation. Currently, the server is setup to run several Docker images running my programs. While moving over the images shouldn't be difficult whatsoever, I'm afraid my storage setup might not be so easy. Currently, it's two 4TB hard drives running in a logical volume. I'd love to simply be able to move over all the files to a backup drive, but I don't have anywhere I can store >5TB of files as a backup.
I googled around, but I couldn't find too many guides on migrating logical volumes. The one or two I did find were most definitely written for someone with far more linux knowledge than I have as a relative noob, so any advice would be extremely welcome!
Fedora is great if you want a faster rolling release and you're already familiar with it.
Debian is great if you want a slower release schedule but stable LTS.
Two different use-cases, but both great options.
Okay, more details will be required, but here's what I'm thinking will work.
One of the benefits of an LVM is its pretty easy to resize it.
The outline of what you can do is this (and we can refine the steps with more details)
Right now you've got your 8TB physical volume, and within that, you should have your volume group, and within that volume group, you should have one or more logical volums that are mounted for your system. The idea is to resize the existing logical volume by shrinking it, creating addition space within the volume group that can be used to create a new logical volume. Then, that new logical volume can be used to install Fedora.
Depending on how much free space you have on the entire physical volume, you could potentially dual boot Fedora and Ubuntu. Roughly speaking, the steps would look like this:
WARNING: These steps are not exhaustive because I don't know the full details of your system. This is not meant to be a guide for you to immediately implement and follow, but to help get you down the right path DO NOT FOLLOW THESE STEPS WITHOUT FIRST FULLY UNDERSTANDING HOW THIS WILL APPLY TO YOUR UNIQUE SYSTEM SETUP.
- Download a Linux ISO of your choice. Ubuntu, Fedora, it doesn't really matter. This one is going to be used to live boot on your server so you can make adjustments to your lvm without having the lvm mounted.
- Boot into the live usb
- Once you get to the desktop environment of the live usb dismiss any installation prompts, etc and open a terminal
- Install the logical volume tools with
sudo whatever-the-package-manager-install-command-is lvm2 - If your volume group is encrypted (typically with LUKS), you'll need to decrypt it to make sizing changes to the lvm(s) in the volume group. You can decrypt it with:
cryptsetup open /dev/your-disk-here name-of-your-volume-group- For example, on my system if I were doing this it would be
cryptsetup open /dev/nvme0n1p2 server(I very creatively named my server volume groupserver)
- Once you can access your volume group, you can use the
dfcommand to see how much space is free in your volume group. The full command you'll want to run is:sudo df -h- This command will list all mounted disks along with filesystem usage data. With this you should be able to determine how much free space you have in your volume group.
- Once you've determined how much free space you have, you can decide how big you want to make your new logical volume. For example, if your current usage is 6TB out of the 8TB total, you could resize the current logical volume down to 7TB, and then create a new logical volume that's 1TB in size for the Fedora install
- You will do the resize using the
lvm2tools installed. The command to shrink the logical volume looks like this:sudo lvreduce --resizefs --size -1TB /dev/your-volume-group/the-lvm-name
- Once you've shrunk the lvm, You can create your new lvm
IMPORTANT NOTES:
- If at all possible, you should really back up the data. If you don't have any kind of backups in place, you're risking losing all of your data, not just in doing this operation, but in general.
- If you want to dual boot, things are more complicated because of where your
/bootexists
Thanks a ton for the very detailed reply!
First off, do you know a good command I could run to give you a better idea of my system's LV setup?
Secondly, I was hoping to fully migrate the data on my ubuntu server to a fedora or debian server rather than leaving it on the ubuntu server
Happy to help!
lsblk will give exactly the info needed. Copy the output of lsblk and paste it into a reply and that will be perfect. Or a screenshot. Whatever's easier for you
Sorry this took a while, I got distracted. Trying to also learn Dart cause why not.
Here's the output of lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 3.6T 0 disk
├─sda1 8:1 0 1G 0 part /boot/efi
├─sda2 8:2 0 2G 0 part /boot
└─sda3 8:3 0 3.6T 0 part
└─ubuntu--vg-ubuntu--lv 252:0 0 7.3T 0 lvm /
sdb 8:16 0 3.6T 0 disk
└─ubuntu--vg-ubuntu--lv 252:0 0 7.3T 0 lvm /
Perfect. So you've got separate /boot and /boot/efi partitions, which means dual booting will be much easier if you want to do that.
The ubuntu--vg-ubuntu-lv is the logical volume you'll want to resize. So now we need to see how much space is available on the volume. To get that, run the command sudo df -h and paste that output into a comment.
From there we can figure out how much space you have and how you might want to resize the volume to prep for a new install.
What is challenging about this is that your data is under your root (/) mount, which is also the ubuntu os. If in the end you want to entirely remove ubuntu, it'll be a little trickier than if your data was in a separate logical volume that you mounted into your root system during boot.
For example many people have a separate logical volume for /home, which makes it easier to switch distros while preserving your home folder with all of your user data, config files, etc...
But that's getting a little ahead of ourselves. Start with sudo df -h for the filesystem usage info and we can go from there.
sudo df -hFilesystem Size Used Avail Use% Mounted on
tmpfs 3.2G 5.9M 3.2G 1% /run
efivarfs 128K 17K 107K 14% /sys/firmware/efi/efivars
/dev/mapper/ubuntu--vg-ubuntu--lv 7.2T 3.8T 3.2T 55% /
tmpfs 16G 0 16G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
/dev/sda2 2.0G 193M 1.6G 11% /boot
/dev/sda1 1.1G 6.2M 1.1G 1% /boot/efi
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/bcfc6cdd2b2dade1c62a74e2471c7854b9c196a3c0f078f797d70113964ede8d/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/a35b73132ddc1e269aa9ebe575d0e5e2e73e6f08cdb825b0887f91e0a4121cef/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/e520dbd210290edb01c7bf8d37cbdfc8e03b7a163dbd456a17868a71c4550397/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/89b5c5806c2482d9318cbf770f836cedb06286a2dd49e7c227fea02e198df2af/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/fa91a69c4a453e2fa734ebe4c83dd8ee77d70749f16f2d4c63f90aaeb4c50d31/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/4dd7bc11c887471609493f01328394b25f7dd2bb535f46f49c42549ad687d862/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/9ee1766864b68a61bc3ba27aa98404ed46b76f6e9e6f0731ed445eb4d4112153/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/13bfb2554321f24c9648cfbda84ade6988df77543116688e6f08481fcc5bb0fa/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/8c271d4bc303852dedc7e6eea9a580f0ffd0dea9a066c9f0b7e5b926b2c5c0be/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/2fa7a2ecc5219b708f88eb3ed080657169306e35be14986500282cb9c455bbc1/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/1c206df8e1e12b7ca2acfec4b9e6617fd155c432f2b22bf34eb201f32f1fe3d6/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/36b806dc4db7596718766e344cff0db305ec4509e6fbdc673b394fa5cb62d9b3/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/40f4535813fe79417d0f040fdd53a5058bb29469026fc7a8eabb2b92db16eadf/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/4c301571ba732358aeffd767b5850c0db56efaf0d561016e8fc077d87187a26a/merged
overlay 7.2T 3.8T 3.2T 55% /var/lib/docker/overlay2/73f9cd053d43eaf8707c481e68bb1beec843b7153a58dc9e99f467a637b33e9c/merged
tmpfs 3.2G 12K 3.2G 1% /run/user/1000
I'm currently running a home server using Ubuntu OS, but I'd like to try and explore other options for operating systems to better my skills with linux/unix.
What are you hoping to explore? Distrohopping servers is pretty much pointless, especially if you're using docker.
Like you're going to use dnf to install docker instead of apt, maybe configure selinux instead of apparmor, and that's it. Definitely not worth it IMO.
If you want to use it as a server, Fedora is annoying because the support lifetimes are so short.
If you want the Fedora / Red Hat experience, consider Alma Linux. Skills wise, it is like using Res Hat Enterprise Linux (RHEL) which is an in-demand skill set.
For a server os, do things like consider stability and ease of upgrading between major versions.
Debian does both of those things extremely well.
If you're playing around with changing distros and your data is valuable, I'd try and find somewhere to back it up to, myself.
Has anyone had success putting ProtonVPN or any other VPN aside from MullvadVPN on Bazzite?
like this
sunzu2 likes this.
I've installed it through secureblue's ujust script. I think this has been the smoothest experience I've had with it on Fedora Atomic.
Previously, I relied on the wireguard profiles I downloaded from ProtonVPN and which I loaded through NetworkManager. While it definitely worked, it was a hassle to redo it every now and then. Furthermore, switching on the go to something else I hadn't loaded already was never an experience I enjoyed doing.
Though, for completeness' sake, ProtonVPN^[Note that, IIRC, IVPN and Mullvad don't fare better in this regard.] hasn't fixed its IP leakage on Linux. And, to my knowledge, the workaround is only available with access to the wireguard profiles. And thus, the cumbersome method actually offers a very tangible merit over the comfortable one.
Finally, while I don't endorse the use of NordVPN, it's the only other VPN that's installable as a sysext. Note that systemd system extensions are still experimental, though. Even if they've (read: N=1) been reliable to use for me.
secureblue: Hardened Fedora Atomic and Fedora CoreOS images
Hardened operating system images based on Fedora Atomic Desktop and Fedora CoreOSsecureblue
like this
sunzu2 likes this.
That guy is a piece of garbage for sure, but as a man losing most of his hair I hope not to be lumped in with trash like that.
PS: Who is the other guy? Sorry for not knowing.
Love... is a burnin' thing...
And it makes... a fiery ring.
Bound... by wild desire...
I fell into a ring of fire.
...
The taste... of love is sweet...
When hearts... like ours meet.
I fell for you like a child...
Ooooh, but the fire went wild.
...
biography.com/musicians/johnny…
Johnny Cash and June Carter:
Two fucked up, rough and tumble assholes who... married and remained together, totally devoted to and thankful for each other for 35 years, died within 4 months of each other.
Burnin' Ring of Fire is one of the most famous songs of all time... June wrote it, Johnny sang the most famous version.
youtube.com/watch?v=1WaV2x8GXj…
...
Andrew Tate:
Self described drug dealer, rapist, sex trafficker, failed MMA fighter... openly states he is disgusted by nearly all women, and only fucks them because it makes other men envious of him, also he claims to only fuck 18 and 19 yos ... apparently he married someone a few months ago.
I'm sure that'll work out well.
Oh right, uh, no notable discography, nor chin.
(why do you think he has the beard)
Johnny Cash Described His Love for June Carter as 'Unconditional'. Inside Their Love Story
Immediately drawn to each other, the country singers navigated rocky roads before and throughout their marriage.Biography
Huh, I may have it wrong... but that would mean wikipedia has it wrong.
Says June Carter and Merle Kilgore wrote the original version, sung originally by June's sister Anita.
en.wikipedia.org/wiki/Ring_of_…
Maybe Johnny edited it a bit?
I... struggle to say this pun but uh:
This is some real Folk-Lore.
Wait wait wait wait........you mean somewhere, out there in the world is MMA footage of andrew tate getting his ass handed to him?
Why is this not viral???
Wait you haven't seen this?
Hold on...
youtube.com/watch?v=yPW0VaTYhN…
Watch those knees just go fucking limp and askew... real KOs lol.
Its likely not viral because this is all bootleg, PPV footage, you'd get copyright takedown'd / sued into oblivion by all the various fight organizations.
I think most of his record is in relatively minor leagues, only a few fights in relatively bigger deal organizations... not sure.
- YouTube
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.youtube.com
Idk about MMA, but afaik his kickboxing record was pretty good, but essentially he was an average/slightly above average pro who had a massively padded record - he mainly fought people who were ranked far lower than him, won some low to mid level titles and didn't take actual fair matchups or compete in tournaments that you'd expect actual highly ranked pros would compete in.
So, he was a perfectly adequate kickboxer and could beat a lot of pro kickboxers in lower divisions but nowhere near "best in the world" / "olympic level" or whatever else he claims
Haha yeah the wording is rather ... malleable, in that way.
Much like your-
You get it lol.
log into multiple google account in thunderbird
log into multiple google account in thunderbird
What information I might leak to google server if I issue log into multiple google account in thunderbird? ip of course but what else might be collected? It would be really great if someone could clarify whether the information below will be send to google when using their email service even through Thunderbird
- device name
- device model
- ...
My main concern is that google will be able to know that I have logged into the same device with different accounts.
In addition, I plan to use VPN when using one google account but not the others. This can be achieved through profiling, but is there an option that I can simply manage all the accounts in one app but without my ip address being collected by several specific email service provider corresponding to several specific email?
thanks a lot!
The big issue is its very easy to leak information that ties all three of your accounts together effectively doxxing yourself to google.
For example one way is to hash your phones non hardware identifiers and then correlate any accounts that have this same hash.
GrapheneOS Frequently Asked Questions
Answers to frequently asked questions about GrapheneOS.GrapheneOS
thanks a lot
though I'm having trouble understanding what exact information will thunderbird leak to email service provider.
Does this mean thunderbird will send (Examples of the global OS configuration available to apps are time zone, network country code and other similar global settings.) to any email service provider that is logged in on thunderbird?
GrapheneOS Frequently Asked Questions
Answers to frequently asked questions about GrapheneOS.GrapheneOS
Actually being progressive to get women's attention and tell them about how lucky they are that he's not like these other closed minded men can certainly be used to control a woman. I highly recommend reading "Why does he do that? Inside the mind of angry and controlling men" by Lundy Bancroft.
I had to admit that I had been controlling of my wife for years and didn't even realize I was doing it. Sometimes I try to cling to my old ideas and dismiss this stuff but I really can't.
"Straight pride" isn't a thing. It's purely a reactionary response to gay pride.
The point of gay pride is for gay people to show that they're not afraid to be who they are in the face of systematic discrimination. It is specifically countering the culture of gay shame that had been the norm in the past. Straight people are already the overwhelming majority and have never been oppressed for their sexual orientation. There's was never any shame associated with it so it makes no sense to proclaim that you're "proud" to be straight.
It's like someone who finished a marathon expressing their pride for their accomplishment, and some loser who has to make everything about themselves says "well I sat on my ass all day and I deserve to be proud of that too!"
The issue is not that it's not okay to be proud of being straight, you're welcome to feel pride all you want. The issue is when you but into someone else's moment and make it about yourself.
lemm.ee has shut down for good
lemm.ee has shut down at 00:14 UTC.
unfortunately I realized too late that I have had hundreds of saved links to posts and comments from there, so I did not have enough time to save them, but anyways it is interesting that maybe a third of the post links I could try were dead. I think linkrot is happening much faster here than on reddit, even if just counting deleted posts.
like this
originalucifer likes this.
it should, as long as the post was synchronized in the past...
seekms your username was different on lemm.ee:
~~hmm that's interesting because I did not have a lemm.ee account! 😁~~ just 3 tons of links to it.
edit: I misunderstood it, no I didn't have an account there
also in the meantime I did some research. it turns out I was probably remembering the Lemmy Universal Link Switcher userscript: greasyfork.org/en/scripts/4692…
it can look up posts by their activitypub id, which is the de-facto ID of a post, that is same across all instances. this ID is the url of the content on the original instance. so, the following could be an activitypub id, if the post was actually created on lemm.ee: lemm.ee/post/64477597
to look up a post by this, the userscript uses the /api/v3/resolve_object API endpoint.
it searches your local instance, and if you are authenticated it also queries the host in the url, lemm.ee in this example. but of course this remote query does not work anymore.
now here comes the twist. I know I always read lemmy through sh.itjust.works, so whatever I saved should be known by this server. and the link that I save, often does not point to the origin instance, because clients work that way.
so it seems 2 lemm.ee links that I tried to look up were not actually posted there, because bmy server does not know a post that has this ap id, I just somehow got a link that points to the lemm.ee version of that post or comment........
Fortunately the messaging app I misuse for link collection always loads the title and image of the webpage, so by some manual work I should be able to find the actual links to each of them.
Lemmy Universal Link Switcher
Ensures that all URLs to Lemmy instances always point to your main/home instance.greasyfork.org
Bankrupt 23andMe Just Sold Off All Your DNA Data
Regeneron is to pay $256 million in cash to acquire "substantially all" of 23andMe's assets, including its massive biobank of around 15 million customer genetic samples and data.
$ curl -sw'\n' \
https://lemmy.ml/api/v3/resolve_object?q=https%3A%2F%2Fsh.itjust.works%2Fcomment%2F19488525 \
| jq -r '.comment.comment.content' | head -n 1
~~hmm that's interesting because I did not have a lemm.ee account! :D~~ just 3 tons of links to it.
$Edit to add: Lemmy seems to URL-encode ':' and '/' sometimes :/
Deleting your account deletes your content, unlike deleting your Reddit account. Hence the linkrot.
I learnt pretty early on that saving posts using the save button was not a good way to save the information 😮💨
Bookmarks won't help if the content gets removed. You've got to copy the important information elsewhere.
I tend to use either a note app (Joplin) or a self-hosted wiki for that.
Yes with ActivityPub there's always failed federation. But Lemmy will send the delete request out when you delete your account. Other software or instances might not honour it, but the intent is there.
As opposed to reddit who do not remove comments when an account is deleted, only mark it as a comment from a deleted account.
I'm not against Lemmy's implementation, but it does require you to collect information you need at the time not assume it will always be there.
$ curl -sI https://lemm.ee/ | grep '^location:'
location: https://join-lemmy.org/
I was literally filling out an application for another server when it went down. Sad day.
Unfortunately I waited too long and now I can’t see my subs that I wanted to migrate.
I think linkrot is happening much faster here than on reddit, even if just counting deleted posts.
Are you sure? Are lemm.ee posts showing as deleted for you? It looks like the copies of anything posted to lemm.ee still exist on the instances that it was federated with. Try this link !animation@lemm.ee, I am pretty sure it should still work on your instance.
It's not all the lemm.ee posts, just a significant amount of them.
also in the meantime I realized my hundreds of lemm.ee links are not actually links to lemm.ee hosted posts, but just links to the lemm.ee view of them. I was just very often copying the wrong link that still worked, but wasn't the definitive one
Piefed speaks to Lemmy instances, yes.
You can import data here: piefed.social/user/settings/im…
Login
This is the flagship instance of PieFed, an open source project for the fediverse. Also try another server.piefed.social
I'm sure I was sufficiently notified, but I am not big on reading updates on ny instace, so this came as a surpise just now.
Thanks for the server! Onwards to the next!
The original shut down thread was posted over 3 weeks ago.
Damn, since I saw the warning thread I was hurrying my slow ass to back up my stuff, which I gladly did (some days ago), lemmy.zip is my new home now.
I feel sorry for the users that didn't get the chance to backup their stuff... An auto backup feature for Lemmy backend might be worth checking out perhaps?
What do you mean? The authenticator instance could ban users, the moderators and the content provider instances could ban users, content provider instances could defederate from authenticator instances and viceversa.
Not sure I'm seeing the issue you are seeing, it's just basically forcing lemmy instances to instead of being both to just be one or the other. The benefit is that the actions on one is free from the drama on the other. One would be dedicated to hosting users, the other would be dedicated to hosting communities, less burnout overall.
Complete bans (at the home instance level) would require synchronization between the content provider instance and the authenticator instance.
Mod actions are caused by users comments on content, so the two aspects are closely intertwined, you can't dissociate the content from the users.
At the moment, admins synchronize in a group to deal with toxic users, usually leading to the ban of those users on their home instance. Having a split between two types of admins adds an additional layer that could actually increase the admins workload.
Since he said that the authenticator is the one that handles the communication & access, I expect banning the person from the authenticator would already automatically prevent anyone using that authenticator (or any other authenticator federating with it) from seeing the content.
As I understand it, the only thing the content provider would do is hosting the data. But access to that data would be determined by the service doing the access control, in the same way current instances are doing it.
the only thing the content provider would do is hosting
Hosting involves removal of content, which is triggered by actions performed by users.
At the moment, if a Lemmy.world user spams CSAM content everywhere, other admins can reach out to the LW admins, they ban the users and purge the content.
In a users/content model, with Lemmy.users and Lemmy.world still being the content, other admins have to reach out to the Lemmy.users instance, get them banned, then to the Lemmy.world admins to trigger the purge of the content on the communities.
On top of that, it is currently recommended to mod from local accounts, as report federation will be fixed in Lemmy 1.0, not released yet: github.com/LemmyNet/lemmy/issu…
The main part of the "admin burnout" comes from the management of users. There isn't really that much to manage on the content part that isn't linked to users.
Moderator from other instances not receiving reports
Requirements Is this a bug report? For questions or discussions use https://lemmy.ml/c/lemmy_support Did you check to see if this issue already exists? Is this only a single bug? Do not put multipl...obosob (GitHub)
Hosting involves removal of content
Exactly. That means instances would not longer have that responsibility. That would be on the hosting service, meaning less pressure for the instance. Once they ban the user, the content would not be shown, it would be purged from the federating network of that instance, regardless of whether the hosting service actually deletes it or not (but I expect it would be better if the protocol makes it so banning a user sends a notification to the hosting service).
At the moment, if a Lemmy.world user spams CSAM content everywhere, other admins can reach out to the LW admins, they ban the users and purge the content.
It's more complex than that, at the moment, because the purge also involves mirrored content in other federating instances. The interesting part is that after it's triggered, then the process is pretty much automatic. When purging, Lemmy.world admins don't have to manually go around asking to all the other instances to delete the content. The purge request is currently being notified automatically to instances federating with it. Why would it be any different for a content hosting service?
Exactly. That means instances would not longer have that responsibility. It would be responsibility of the hoster, meaning less pressure for the instance. Once they ban the user, the content would not be shown.
At that point, the content instances would be merely storage. This model is already possible now, but the vast majority of instances host both users and content, because it is more interesting to have users to build a local community than just being a storage server.
If some admins were interested in only being storage servers, you would see more instances not allowing user registrations, but all the 35th most active instances allow them: lemmy.fediverse.observer/list
The interesting part is that after it’s triggered, then the process is pretty much automatic.
There have been cases where federation deletion was not processed correctly, so it would add an additional layer of potential issue
- lemmy.dbzer0.com/post/38123874
Why would it be any different for a content hosting server?
As I stated above, it is currently recommended to mod from local accounts, as report federation will be fixed in Lemmy 1.0, not released yet:
- github.com/LemmyNet/lemmy/issu…
- lemmy.world/post/30022166/1719…
What that means is that on top of your Lemmy.user account, you would need a Lemmy.content account that would be able to fully moderate the community as a local account. Users don't like to juggle between different accounts to moderate and participate.
Moderator from other instances not receiving reports
Requirements Is this a bug report? For questions or discussions use https://lemmy.ml/c/lemmy_support Did you check to see if this issue already exists? Is this only a single bug? Do not put multipl...obosob (GitHub)
it is more interesting to have users to build a local community than just being a storage server.
Imho, it comes down to how much you care about the content of the community you are building. The reason I'm in lemmy.ml and not some smaller instance is because of problems like the ones showcased here.
If I could self-host my own content I would not mind being somewhere else. In fact, I'm considering setting up something through brid.gy. The fact that there isn't a separation of the hosting means that if I want to secure my content I need to have my own 1-person instance which is not something the protocol is very well suited for. Plus it's likely most lemmy instances would not federate with it anyway since, understandably, they may prefer an allowlist approach rather than blocklist. The only sane way would be to have the instances have full control of the access as they are now, with storage being in a separate service that can be managed separately, the hosting service.
it is currently recommended to mod from local accounts
Would this change at all if there was a hosting service?
I expect you would still be recommended to mod from local accounts (the "authenticator"), even if the content hosting was a separate service. The local account would continue being the primary source of access to the content.. note that having a separate hosting service doesn't mean that the hosting service must be the one managing access to the content from the fediverse.
The reason I’m in lemmy.ml and not some smaller instance is because of problems like the ones showcased here.
Quite a few instances are managed by non-profits which are much less prone to service disruptions, like fedecan.ca/en/ for lemmy.ca.
The local account would continue being the primary source of access to the content…
Isn't that contradictory with the users - content separation?
note that having a separate hosting service doesn’t mean that the hosting service must be the one managing access to the content.
That seems contradictory with the previous point. My understanding was that
- users would use Lemmy.user accounts to browse content (this is the recommended way to avoid user management for the content instance admins)
- mods would use Lemmy.content accounts to moderate communities (users would have to switch to those type of accounts from the first type if they want to start / mod a community)
Is this correct, or am I missing something?
Welcome | Fedecan
Discover a new way to connect online. As a Canadian not-for-profit, we can help you join a growing network of federated social media that prioritizes community over profit.fedecan.ca
Then I think we had a different understanding. My understanding was something akin to what bluesky does with the PDS, the data service just hosts data and hands it over to the other service which is the one actually doing the indexing of that data and aggregating it into communities. The data of the community might be hosted in the hosting services, but it's accessed, indexed and aggregated through the authentication service.
The access management, the accounts, the distribution of data, etc. that's still in the server managing the federation. That's the way I understood it, at least (I'm not the person that originally started this train, that was @TheObviousSolution@lemmy.ca ).
This allows the content to potentially not be completely lost if an instance dies because it would be easier to carry your data to another instance without losing it. It's the same principle as in bluesky but applied to the fediverse.
Self-hosting - AT Protocol
Self-hosting a Bluesky PDS means running your own Personal Data Server that is capable of federating with the wider ATProto network.AT Protocol
Ah, I see. So something like activitypods.org/ ?
That would be an improvement indeed, but probably not something we will see any time soon.
ActivityPods - Personal data spaces powered with ActivityPub
Brings together ActivityPub and Solid Pods and empowers developers to create truly decentralized applications.ActivityPods
Complete bans (at the home instance level) would require synchronization between the content provider instance and the authenticator instance.
What are you referring to as a ban? Complete bans already require synchronization between different federated instances. Sometimes the home instance of a user is unable to entirely delete the content of a user because of it.
Mod actions are caused by users comments on content, so the two aspects are closely intertwined, you can’t dissociate the content from the users.
Not really. Mod actions are over a community, not user history. They are perfectly able to remove user comments within their community, and since they are the authoritative source that controls whom it is spread to that has greater influence. That never stops the same content by the same user from appearing elsewhere.
At the moment, admins synchronize in a group to deal with toxic users, usually leading to the ban of those users on their home instance.
They would still do the same, but the "usually leading to the ban of those users" perhaps does more to reveal what your actual problem is than anything else. You and me will have to disagree, because admins should not be authoritarian figures, but should only have control within their domain.
- If they want to administrate over a group of users, they can have control over which users are and aren't allowed over that particular group. They can issue their own warnings to users.
- If they want to administrate over communities, they can have control over which communities are allowed and how users are allowed to interact with those. They can remove users from those communities entirely.
The small but loud minority of toxic users can just have their authentication instances defederated if those instances refuse to do anything with them. If it is an authentication instance doing the defederation, then it will affect all of their users. If it is a content provider instance, it will affect all of their communities. In the current system, it does both because both are coupled into the same instance, so it's even compatible with it.
It stops bad faith actors from trying to pollute communities to slur entire instances, like lemm.ee or blahaj, because of their problems with their userbase, by simply stopping it from being an issue. Administrators don't have to worry about policing communities or users if they don't want to, they would be able to better choose whom they are catering to without bad faith backlash elsewhere.
Almost nothing of the current structure changes, except that dedicated instances have the functionality they don't need disabled. Both can still block each other to their heart's content, and if your problem is having more "splits" - that is literally what federated instances are, there can always be more ... Maybe your problem is with the fediverse and its distributed nature? You are making it out to be as if there is only ever a big bad group of toxic users and that all administrators always completely agree on all bans to make your argument work. At that point, just create your own reddit clone.
I addressed a few of your points in the parallel thread with @Ferk@lemmy.ml (actually, it seems like you read it as you commented below)
As I stated in one of the comments
At that point, the content instances would be merely storage. This model is already possible now, but the vast majority of instances host both users and content, because it is more interesting to have users to build a local community than just being a storage server.If some admins were interested in only being storage servers, you would see more instances not allowing user registrations, but all the 35th most active instances allow them: lemmy.fediverse.observer/list
I had a second look, and instances not allowing sign up are either going to shutdown (lemmy.one) are false positives (bookwormstory.social/signup) or are single-person instances:
Your vision is possible now, but it seems like almost no one wants to implement it.
Fediverse Observer checks all sites in the fediverse and gives you an easy way to find a home from a map or list or automatically.
Lemmy Sites Status. Find a Lemmy server to sign up for, find one close to you!lemmy.fediverse.observer
If admins goes missing like the feddit.de ones did, the same problem would still impact that instance, be it a user or a content instance
If admins just want to shutdown without willing to transfer the instance / domain like the lemm.ee ones did, the same problem would still impact that instance, be it a user or a content instance
Using instances with non profit like fedecan.ca/en/ (lemmy.ca and piefed.ca) seems a better way to mitigate that risk.
Welcome | Fedecan
Discover a new way to connect online. As a Canadian not-for-profit, we can help you join a growing network of federated social media that prioritizes community over profit.fedecan.ca
I think you are misunderstanding the problem being solved. Expecting all instances to become non-profits and manage even more responsibility exacerbates the problem and inhibits the fediverse growth. Non-profits also have their share of pitfalls and is an entirely different beast.
lemm.ee told you the reason they were shutting down - not enough people to keep the place running and burnout. I can't force you to see how minimizing and distributing responsibility helps those issues if you don't want to. Less responsibility, easier for people not to ditch projects or end them.
That has nothing to do about what they decided to do afterwards. I thank them for not transferring the instance domain to a completely different party without user consent, and people would have disagreed with that so it's best everyone found their own solution. It would even have put their account information at risk.
lemm.ee told you the reason they were shutting down - not enough people to keep the place running and burnout. I can’t force you to see how minimizing and distributing responsibility helps those issues if you don’t want to. Less responsibility, easier for people not to ditch projects or end them.
Lemm.ee had the option to close their registration at any time. But registrations are only one source of user management.
In a scenario where Lemm.ee would have become a content instance, but kept their federation policy, they would still have received all the reports about posts on the communities they hosted, wherever the reported user comes from.
Lemm.ee was the instance with the most active communities after LW, there's no way to avoid a certain level of responsibility.
Like I said, I can't force you to see it.
In a scenario where Lemm.ee would have become a content instance, but kept their federation policy, they would still have received all the reports about posts on the communities they hosted, wherever the reported user comes from.
Being a dedicated content instance provider would also inherently imply dedicating that instance to a certain, more controlled type of content. An authentication instance might want to cater to a geography, which will probably decide to interact with the rest of the world and to provide adequate verification and certification mechanisms. A content instance might want to cater to a geography or a subject, resulting in specialized participation, with certification and verification based on the content, not the user.
You keep seeing monolithic instances that congregate the most communities as a plus. That's a negative in my perspective on the fediverse. It shouldn't be competing reddit clones with the one having the most communities winning out.
Being a dedicated content instance provider would also inherently imply dedicating that instance to a certain, more controlled type of content. An authentication instance might want to cater to a geography, which will probably decide to interact with the rest of the world and to provide adequate verification and certification mechanisms. A content instance might want to cater to a geography or a subject, resulting in specialized participation, with certification and verification based on the content, not the user.
Those control mechanisms were available to lemm.ee. There's a reason most active instances mostly defederate from certain instances.
You keep seeing monolithic instances that congregate the most communities as a plus. That’s a negative in my perspective on the fediverse. It shouldn’t be competing reddit clones with the one having the most communities winning out.
I don't, I'm the one regularly pushing for more decentralization of communities (reddthat.com/post/20197120 , e.g. !privacy@lemmy.dbzer0.com vs !privacy@lemmy.ml)
But I would rather have instances use the tools they currently have (and hopefully more will come with Piefed development catching up) rather than trying to re-engineer the whole platform when some instances don't use the existing moderation tools.
Like I said, I can’t force you to see it. The fact that you think it would mean re-engineering the whole platform means you aren't getting it. It's almost literally the suggestion of least effort, it's largely an organizational change that encourages instances not to cope with more responsibility than they can deal with by encouraging decoupling the current structure into two more specialized ones.
If you want re-engineering the whole platform, then I would suggest having all instances be authentication instances and rather than "host" communities to allow users to broadcast to community labels. Have any number of moderation groups be able to be created in an organized on that label or a personalized way by allowing users to select their own curators, perhaps even extrapolating it from the downvotes of trusted users and prioritizing the ranking of those they value. Work on providing a ground.news of discussions instead of biased takes and prunings from those in charge. Allow fast tracking of moderation across these adhoc groups for specially toxic content. That would solve the problem of nobody really going from a 10000 user community that has 100 daily posts to a 10 user community with 2-3 posts a week, because they would all operate within the same community but every user would be able to customize their perspective. The risk then is to balance the bubble they've created with transparency of all the other bubbles people are creating to interact with the community. Each particular instance would be able to be as biased as it wants to particular users or groups of users, but their content would truly be broadcast and federated.
Like I said, I can’t force you to see it. The fact that you think it would mean re-engineering the whole platform means you aren’t getting it. It’s almost literally the suggestion of least effort, it’s largely an organizational change that encourages instances not to cope with more responsibility than they can deal with by encouraging decoupling the current structure into two more specialized ones.
You make this about me, but nobody else sees it. As you said, content instance are possible today (admins just have to disable their registrations), but nobody does that.
Cool, I'll come to you to check on the feelings of literally entirely everyone else when I need to. I'm glad everyone went out and got themselves a spokesman. Meanwhile, I'll point you to an earlier mention in my comments about raising awareness.
You shift into completely diametrically opposed claims whenever it seems to suit you and portray a lack of awareness and possibility as consensus in this regard. Is it "trying to re-engineer the whole platform" or is it already "possible today"? There is no use like this because without willingness, people will just set up the instances like they've been told they have and perform slight variations on them. That is no proof or argument against the idea at all from people just following the cookie cutter.
A solution to this is Nostr.
One identity across the entire network.
Twitter-like Platform/client dies overnight? No problem, all data still there.
Reddit-like platform/client dies overnight? No problem, all data still there.
PC dies overnight? No problem, all data still there.
Data is sync'd across multiple relays, you can run your own, and clients are interoperable.
It's my go-to now, for everything.
A person's posts, their followers/audience, chats, etc never needs to be migrated.
Media is stored using the Blossom protocol which was created for Nostr.
V4V(Value 4 Value) is also a thing, so instead of just Likes/Reactions you can tip/Zap Sats (Bitcoin over Lightning) but that's optional.
It's not centralised though.
It's quite decentralised actually.
As for your "nazi bar problem", I'd suggest you review the relays you connect to. That's the beauty of free speech, and power of choice.
The content isn't gone.
It's still retained by the various instances that lemm.ee federated with, and entering the url of a lemm.ee post on those instances should still let you find their local copies if they have it.
yeah but it turns out a lot of my lemm.ee links are not actually to content that's originating from there, but lemm.ee-view links for which if I search, there's no result.
Fortunately I also have the title and image permanently loaded for these links, so I can find them with some manual work
New VPN Service Can't Log Users by Design - TorrentFreak
New VPN Service Can't Log Users by Design * TorrentFreak
VP.net promises 'cryptographically verifiable privacy' by using Intel SGX enclaves, so even the provider can't track what its users do.Ernesto Van der Sar (TF Publishing)
How to undo Firefox changes to the titlebar controls buttons?
Firefox seemingly very recently shipped their own titlebar controls buttons, which worsens even further the lackluster OS integration. In the screenshot you see my regular control buttons on the window to the left (default KDE Plasma theme) and the new custom buttons Firefox is serving now.
Would anyone know how to undo that change in about:config or anywhere else?
My GTK Theme is already set to "Breeze".
And my Firefox Theme is set to "System".
Thanks though.
What you are referring to are the window decorations.
Apart from Linux Mint, Firefox almost always uses client-side decorations. What you are showing here is still client-side.
It is just that Mozilla recently enabled vertical tabs option for everyone, so the top bar is now slightly smaller than before. You can disable vertical tabs easily by searching in the settings.
like this
warm likes this.
Did you change the gtk theme recently? Firefox follows the gtk3 titlebars, not the qt ones. You would have to change the gtk3 theme back to breeze to have it match again.
If you changed off the default firefox theme, it will also no longer use native titlebar buttons, to make it use native ones with a different firefox theme, go to about:config, search non-native, find the titlebar buttons option, and turn it off.
My GTK Theme is already set to breeze:
Changing the value in about:config had no effect.
Thanks anyway though!
I have the same issue since one or two months, I'm on Firefox Nightly 142.0a1 currently.
For me it looks like this:
Firefox on the left, Dolphin (which uses the system titlebar control buttons) on the right.
A few months ago, firefox also used the system titlebar control buttons. When I noticed the change at first, I also searched for solution online and in about:config, but didn't find anything. All other solutions posted here sadly don't work:
- browser.tabs.inTitlebar only adds a standalone titlebar, like you noted.
- When searching for non-native in about:config, I don't see any titlebar buttons option that I can turn off.
- Vertical Tabs are already disabled for me in the settings.
If anyone finds a solution to this, I would be happy to be notified. Thanks in advance!
bugzilla.mozilla.org/show_bug.…
If @Frellwit is right, this seems to be intended and not a bug 🙁
1967099 - firefox nightly using custom titlebar buttons irrespective of widget.gtk.non-native-titlebar-buttons.enabled value
RESOLVED (nobody) in Core - Widget: Gtk. Last updated 2025-06-25.bugzilla.mozilla.org
Damn, but I'm not sure if I agree with gregp's resolution of the bug. The way I understand the changes in bugzilla.mozilla.org/show_bug.… it should still use the system theme, but rendered by firefox itself. However, the current state is that it doesn't follow the system theme anymore :/
EDIT: I just saw this comment: lemmy.world/comment/17957836
And yep, that's correct. I'm also using the Papirus icon theme, when I change the theme to breeze or something else, the buttons in firefox titlebar also reflect this change after a restart. So Firefox is now using the window-{maximize,minimize,close,....}-symbolic icons from the icon theme and not from the window decorations setting.
1964046 - After bug 1964022, titlebar buttons with adwaita look a bit off.
RESOLVED (emilio) in Core - Widget: Gtk. Last updated 2025-06-25.bugzilla.mozilla.org
1967099 - firefox nightly using custom titlebar buttons irrespective of widget.gtk.non-native-titlebar-buttons.enabled value
RESOLVED (nobody) in Core - Widget: Gtk. Last updated 2025-06-25.bugzilla.mozilla.org
Google faces EU antitrust complaint over AI Overviews
Google faces EU antitrust complaint over AI Overviews | TechCrunch
A group known as the Independent Publishers Alliance has filed an antitrust complaint with the European Commission over Google’s AI Overviews, accordingAnthony Ha (TechCrunch)
I wasted 2h trying to figure out why GTA V only run at 35fps and use 25w of power, turn out my dumb ass set power profiles daemon to powersaving mode and forgot about it.
Undervolting is great on gaming laptops. Usually nets you a performance boost simply by reducing thermal throttling.
Even just a few mV has made a difference for me.
GitHub - ilya-zlobintsev/LACT: Linux GPU Configuration And Monitoring Tool
Linux GPU Configuration And Monitoring Tool. Contribute to ilya-zlobintsev/LACT development by creating an account on GitHub.GitHub
Might be worth checking out, not positive it supports your laptop but if it does it might give you control over some bells and whistles like fan curves and lighting.
Doesn't work for kernels newer than 6.13 if I recall correctly. Tried to install it last month. I'm running Garuda Arch, and kernel 6.15, even having the repository active completely borks pacman.
Edit: it's an active project, so keep an eye on it. Or install CatchyOS as it's now standard there.
Edit²: I'm going to have another stab at it, possibly fucked something up? Idk, I was following the instructions, and everything was fine until I added the Repos to pacman.
Running arch as well and have it installed. Works just fine with linux-g14 kernel and headers. I use the zen kernel mostly so i don't have the armory settings most of the time because I use zen but everything else works.
Just did a pacman -Q | grep linux and my linux-g14 is on 6.15.2 and zen is on 6.15.3.
Did you add the keys?
Tried that. Also didn't work. 🤷
As I replied above, I'll give it another shot. Maybe I fucked something up? Everything seemed to be working fine until I added the Repos to pacman, then it all went tits up.
Be thorough, what messages did you get?
Also their tool i stalls the repos only (you install the kernel right after)
Don't remember the exact messages.
Was following these instructions off the official page.
Got to where the orange line is on the screenshot below, and it started throwing up a load of network errors. Again can't remember the exact messages, it's been a month, but it was saying that the Repos were unreachable. And pacman then stopped working entirely until I removed the Repos.
Edit: I'll run through it again tonight and come back with actual answers
35 fps 25W of power
Sounds like a win to me. Or was it slugish?
AI to make us more private?
Just listened to Naomi Brockwell talk about how AI is basically the perfect surveillance tool now.
Her take is very interesting: what if we could actually use AI against that?
Like instead of trying to stay hidden (which honestly feels impossible these days), what if AI could generate tons of fake, realistic data about us? Flood the system with so much artificial nonsense that our real profiles basically disappear in the noise.
Imagine thousands of AI versions of me browsing random sites, faking interests, triggering ads, making fake patterns. Wouldn’t that mess with the profiling systems?
How could this be achieved?
I feel like I woke up in the stupidest timeline where climate change is about to kill us, we decide stupidly to 10x our power needs by shoving LLMs down everyone’s throats, and the only solution to stay private is to 10x our personal LLM usage by generating tons of noise about us just to stay private. So now we’re 100x ing everyone’s power usage and we’re going to die even sooner.
I think your idea is interesting – I was also thinking that same thing awhile back – but how tf did we get here.
like this
Hexanimo likes this.
There are ais that can detect use of ai. This is a losing strategy as we burn resources playing cat and mouse.
As with all things greed is at the root of this problem. Until privacy has any legislative teeth, it will continue to be a notion for the few and an elusive one at that.
Yeah agreed. What's going on in my state of Pennsylvania is they're reopening the Three Mile Island nuclear plant out near Harrisburg for the sole reason of powering Microsoft's AI data centers. This will be Unit 1 which was closed in 2019. Unit 2 was the one that was permanently closed after the meltdown in 1979.
I'm all for nuclear power. I think it's our best option for an alternative energy source. But the only reason they're opening the plant again is because our grid can't keep up with AI. I believe the data centers is the only thing the nuke plant will power.
I've also seen the scale of things in my work in terms of power demands. I'm an industrial electrical technician, and part of our business is the control panels for cooling the server racks for Amazon data centers. They just keep buying more more and more of them, projected til at least 2035 right now. All these big tech companies are totally revamping everything for AI. Like before a typical rack section might have drawn let's say 1000 watts, now it's more like 10,000 watts. Again, just for AI.
"it says here you clicked 'sign me up for ISIS' 10000 times?"
"Haha no officer, you see it was my social chaff AI that clicked it"
Remembered an article of how a hacker tried to fidget with road cameras with licence plate NULL but for some reason have all the tickets sent to his home.
In the end he got tired and sold the car.
It’s an interesting concept, but I’m not sure the payoff justifies the effort.
Even with AI-generated noise, you’re still being tracked through logins, device fingerprints, and other signals. And in the process, you would probably end up degrading your own experience; getting irrelevant ads, broken recommendations, or tripping security systems.
There’s also the environmental cost to consider. If enough people ran decoy traffic 24/7, the energy use could become significant. All for a strategy that platforms would likely adapt to pretty quickly.
I get the appeal, but I wonder if the practical downsides outweigh the potential privacy gains.
getting irrelevant ads
you guys are getting ads?
You said
you would probably end up degrading your own experience; getting irrelevant ads
Irrevant ads = less targeted ads. You seem to think this is a negative. I'm saying it is actually a positive.
Obscuration is what you're thinking and it works with things like adnauseun (firefox add on that will click all ads in the background to obscure preference data). It's a nice way to smear the data and probably better to do sooner (while the data collection is in infancy) rather than later (where the companies may be able to filter obscuration attempts).
I like it. I am really not a fan of being profiled, collected, and categorized. I agree with others, I hate this time line. It's so uncanny.
Whatever data profile they already have on your can be obscured to make it useless vs them probably trickling in data.
Think of it like um...
Having a picture of you with a moderate amount of notes that are accurate, vs having a picture of you with so much irrelevant/inaccurate data that you can't be certain of anything.
But the picture of me they have is: doesn't click ads like all the other adblocker people (which is accurate)
Why would I want to change it to: clicks ALL the ads like all the other adnauseum people (which is also accurate)
You are just moving the problem one step further, but that doesn't change anything (if I am wrong please correct me).
You say it is ad behaviour + other data points.
So the picture of me they have is: [other data] + doesn’t click ads like all the other adblocker people (which is accurate)
Why would I want to change it to: [other data] + clicks ALL the ads like all the other adnauseum people (which is also accurate)
How does adnauseum or not matter? I genuinely don't get it. It's the same [other data] in both cases. Whether you click on none of the ads or all of the ads can be detected.
As a bonus, if adnauseum would click just a couple random ads, they would have a wrong assumption of my ad clicking behaviour.
But if I click none of the ads they have no accurate assumption of my ad clicking behaviour either.
Judging by incidents like the cambridge analytica scandal, the algorithms that analyze the data are sophisticated enough to differentiate your true interests, which are collected via other browsing behavious from your ad clicking behaviour if they contradict each other or when one of the two seems random.
[other data] + clicks ALL the ads like all the other adnauseum people
adnauseum does not click "all the other ads", it just clicks some of them. Like normal people do. Only those ads are not relevant to your interests, they're just random, so it obscures your online profile by filling it with a bunch of random information.
Judging by incidents like the cambridge analytica scandal, the algorithms that analyze the data are sophisticated enough to differentiate your true interests
Huh? No one in the Cambridge Analytica scandal was poisoning their data with irrelevant information.
adnauseun (firefox add on that will click all ads in the background to obscure preference data)
is what the top level comment said, so I went off this info. Thanks for explaining.
Huh? No one in the Cambridge Analytica scandal was poisoning their data with irrelevant information.
I didn't mean it like that.
I meant it in an illustrative manner - the results of their mass tracking and psychological profiling analysis was so dystopian, that filtering out random false data seems trivial in comparison. I feel like a bachelor or master thesis would be enough to come up with a sufficiently precise method.
In comparison to that it seems extremely complicated to algorithmically figure out what exact customized lie you have to tell to every single inidividual to manipulate them into behaving a certain way. That probably needed a larger team of smart people working together for many years.
But ofc I may be wrong. Cheers
filtering out random false data seems trivial
As far as I know, none of them had random false data so I'm not sure why you would think that?
In comparison to that it seems extremely complicated to algorithmically figure out what exact customized lie you have to tell to every single inidividual to manipulate them into behaving a certain way. That probably needed a larger team of smart people working together for many years.
I feel like you're greatly exaggerating the level of intelligence at work here. It's not hard to figure out people's political affiliations with something as simple as their browsing history, and it's not hard to manipulate them with propaganda accordingly. They did not have an "exact customized lie" for every individual, they just grouped individuals into categories (AKA profiling) and showed them a select few forms of disinformation accordingly.
Good input, thank you.
As far as I know, none of them had random false data so I’m not sure why you would think that?
You can use topic B as an illustration for topic A, even if topic B does not directly contain topic A. For example: (during a chess game analysis) "Moving the knight in front of the bishop is like a punch in the face from mike tyson."
There are probably better examples of more complex algorithms that work on data collected online for various goals. When developing those, a problem that naturaly comes up would be filtering out garbage. Do you think it is absolutely infeasable to implement one that would detect adnauseum specifically?
You can use topic B as an illustration for topic A
Sometimes yes. In this case, no.
Do you think it is absolutely infeasable to implement one that would detect adnauseum specifically?
I think the users of such products are extremely low (especially since they've been kicked from Google store) that it wouldn't be worth their time.
But no, I don't think they could either. It's just an automation script that runs actions the same way you would.
This is like chaff, and I think it would work. But you would have to deal with the fact that whatever patterns it was showing you were doing "you would be doing".
I think there are other ways that AI can be used for privacy.
For example, did you know that you can be identified by how you type/speak online? what if you filtered everything you said through an LLM first, normalizing it. Takes away a fingerprinting option. Could use a pretty small local LLM model that could run on a modest local desktop...
First, Naomi and her team are doing a fantastic work in security for masses, easily top 5 worldwide!
AI is capable but we are still failing at program it properly, gosh, even well funded companies are still doing a poor job at it... (just look at the misplaced ads and ineffective we still get.)
What I want, and it is easy to do TODAY, is AI checking our FOSS... so many we use and just a tiny, tiny minority of it goes with some scrutiny. We need AI to go through the FOSS code looking for maliciousness now.
So, she is talking about an AI-war? Where those who don't want us to be private, controls the weapons? Anyone else see a problem with that logic?
Thousands of "you" browsing different sites, will use an obscene amount of power and bandwidth. Imagine a million people doing that, not a billion... That's just stupid in all kinds of ways.
This isn’t a very smart idea.
People trying to obfuscate their actions would suddenly have massive associated datasets of actions to sift through and it would be trivial to distinguish between the browsing behaviors of a person and a bot.
Someone else said this is like chaff or flare anti missile defense and that’s a good analog. Anti missile defenses like that are deployed when the target recognizes a danger and sees an opportunity to confuse that danger temporarily. They’re used in conjunction with maneuvering and other flight techniques to maximize the potential of avoiding certain death, not constantly once the operator comes in contact with an opponent.
On a more philosophical tip, the masters tools cannot be turned against him.
No, you can’t.
You are not the hero, effortlessly weaving down the highway between minivans on your 1300cc motorcycle, katana strapped across your back, using dual handlebar mounted twiddler boards to hack the multiverse.
If ai driven agentic systems were used to obfuscate a persons interactions online then the fact that they were using those systems would become incredibly obvious and provide a trove of information that could be easily used to locate and document what that person was doing.
But let’s assume what the op did worked, and no one could tell the difference.
That would be worse! Suddenly there’s hundreds of thousands of data points that could be linked to you and all that’s needed for a warrant are two or three that could be interpreted as probable cause of a crime!
You thought you were helping yourself out by turning the fuzzer on before reading trot pamphlets hosted on marxists.org but now they have an expressed interest in drain cleaner and glitter bombs and best case scenario you gotta adopt a new pitt mix from the humane society.
Ok, got another one for ya based on some comments below. You have all the usual addons to block ads and such, but you create a sock-puppet identify, and use AI to "click" ads in the background (stolen from a comment) that align with that identity. You dont see the ads, but the traffic pattern supports the identity you are wearing.
So rather than random, its aligned with a fake identity.
This is a dangerous proposition.
When the dictatorship comes after you, they're not concerned about the whole of every article that was written about you All they care about are the things they see as incriminating.
You could literally take a spell check dictionary list, pull three words out of the list at random and feed it into a ollama asking for a story with your name that included the three words as major points in the story.
Even on a relatively old video card, you could probably crap out three stories a minute. Have it write them in HTML and publish the site map into major search engines on a regular basis.
EDIT: OK this was too fun not to do it real quick!
~ cat generate.py
import random
import requests
import json
import time
from datetime import datetime
ollama_url = "http://127.1:11434/api/generate"
wordlist_file = "words.txt"
with open(wordlist_file, 'r') as file:
words = [line.strip() for line in file if line.strip()]
selected_words = random.sample(words, 3)
theme = ", ".join(selected_words)
prompt = f"Write a short, imaginative story about a person named Rumba using these three theme words: {theme}. The first word is their super power, the second word is their kyptonite, the third word is the name of their adversary. Return only the story as HTML content ready to be saved and viewed in a browser."
response = requests.post(
ollama_url,
headers={"Content-Type": "application/json"},
data=json.dumps({"model": "llama3.2","prompt": prompt})
)
story_html = ""
for line in response.iter_lines(decode_unicode=True):
if line.strip():
try:
chunk = json.loads(line)
story_html += chunk.get("response", "")
except json.JSONDecodeError as e:
print(f"JSON decode error: {e}")
timestamp = datetime.now().strftime("%Y%m%d_%H%M%S")
filename = f"story_{timestamp}.html"
with open(filename, "w", encoding="utf-8") as file:
file.write(story_html)
print(f"Story saved as {filename}")~ cat story_20250630_130846.html
<!DOCTYPE html>
<html>
<head>
<title>Rumba's Urban Adventure</title>
<meta charset="UTF-8">
<style>
body {font-family: Arial, sans-serif;}
</style>
</head>
<body>
<h1>Rumba's Urban Adventure</h1>
<br>Rumba was a master of <b>slangs</b>, able to effortlessly weave in and out of conversations with ease. Her superpower allowed her to manipulate language itself, bending words to her will. With a flick of her wrist, she could turn a phrase into a spell.<br>
<br>But Rumba's greatest weakness was her love of <b>bungos</b>. The more she indulged in these sweet treats, the more her powers wavered. She would often find herself lost in thought, her mind clouded by the sugary rush of bungos. Her enemies knew this vulnerability all too well.<br>
<br>Enter <b>Carbarn</b>, a villainous mastermind with a personal vendetta against Rumba. Carbarn had spent years studying the art of linguistic manipulation, and he was determined to exploit Rumba's weakness for his own gain. With a wave of his hand, he summoned a cloud of bungos, sending Rumba stumbling.<br>
<br>But Rumba refused to give up. She focused her mind, channeling the power of slangs into a counterattack. The air was filled with words, swirling and eddying as she battled Carbarn's minions. In the end, it was just Rumba and Carbarn face-to-face.<br>
<br>The two enemies clashed in a spectacular display of linguistic fury. Words flew back and forth, each one landing with precision and deadliness. But Rumba had one final trick up her sleeve - a bungo-free zone.<br>
<br>With a burst of creative energy, Rumba created a bubble of pure slangs around herself, shielding her from Carbarn's attacks. The villain let out a defeated sigh as his plan was foiled once again. And Rumba walked away, victorious, with a bag of bungos stashed safely in her pocket.<br>
</body>
</html>Interesting that it chose female rather than male or gender neutral. Not that I'm complaining, but I expected it to be biased 😀
Yup, you'd be surprised what you can accomplish with 10gb of VRAM and a 12b model. Hell, my profile pic (which isn't very good, tbf) was made on that 10gb VRAM card using localhosted stable diffusion. I hate big corp AI, but I absolutely love open market and open source local models. Gonna be a shame when they start to police them.
To OP: The problem is that they're looking for keywords. With the amount of people under surveillance these days, they don't give a rat's ass if you went to your favorite coffee roasting site, they want to find the stuff they don't want you to do.
Piracy? You're on a list. Any cleaning chemical that can be related to the construction of explosives? You're on a list. These lists will then tack on more keywords that pertain to that list. For example, the explosives list will then search for matching components bought within a close span of time that would indicate you're making them. Even searching for ways to enforce your privacy just makes them more interested.
So then you put out a bunch of fake data. This data happens to say you viewed a page pertaining that matching component. Whelp, that list just got hotter and now there are even more eyes on you and they're being slightly more attentive this time. Its a bad idea. The only way you're getting out of surveillance, at least online, is to never go online.
In reality, they probably won't even do anything about the above. What they really want is money. Money for your info; money to sell more things to you. They want the average home to be filled with advertisements tailored from your information. Because those adverts make those companies money, which they then use to buy more information to monetize your existence. Its the largest pyramid scheme known to humanity, and we're the unpaid grunts.
The moment the world became connected through telephones, cable TV, and then internet this scheme was already in motion way beforehand. Let's be honest, smartphones were the motherload. A TV, phone, and computer you always keep on you? They were salivating that day.
This strategy of generating fake data just doesn't work well. It requires a ton of resources to generate fake data that can't be easily filtered which ends up making the strategy non viable on most situations. Look at Mullvads DAITA and how it constantly has to be improved to fight this and, that's just for basic protection.
There is a bit of a cognitive dissonance that goes on, where people seem to understand that you are tracked constantly online and offline through all sorts of complex means but still think relatively mundane solutions could break that system.
Xiaomi naming convention
like this
☆ Yσɠƚԋσʂ ☆ likes this.
Also, some very specific colours flicker. A developers option makes it go away but the option turns itself off after some time.
Their tablet naming is at least a little more sane.
I don't know why companies don't just put the release year in the name. That'd be much simpler than having to keep track of device generations.
China has a big problem with selling an identical product fifteen times through twelve different companies.
I think it’s an SEO strategy for Amazon, where they edge out any competition by being everywhere on the first page of search results. They also have the ability to game reviews by killing any products that get bad reviews and recreating them under a new brand.
I decided not to buy another Xiaomi phone when the one I previously had would turn off when it was a bit mildly cool outside.
Like, I would take it out of my pocket to look at bus schedules but it would turn off after a few seconds of being exposed to 5°C, saying the battery was dead. Another time I had it attached to my bike handlebar and it kept turning off because apparently 13°C with the wind was also too chilly. Every time that fucking Xiaomi phone was feeling a bit chill, the battery would just die. And not even in freezing temps!
I looked online and everone of the fanboys on the forums kept saying that this is normal, battery performance degrades in winter, that iPhones do the same, and apparently all other phones do the same. In short, I had unreasonable expectations.
Yet, all my other phones' batteries didn't die within seconds of taking them out of my pocket, even in winter.
So, I don't have to bother with their names anymore.
But it was maybe a few months old at best. Maybe it had a defective battery from the start but I contacted Xiaomi and I've been told it was "normal" in "winter". Then when I looked online for this issue with Xiaomi phones, the people on the forums said it was "normal", and that I expected too much.
In the end it was probably a defective battery. I couldn't believe that they were selling millions of these and that people always just kept them warm all the time. Like, they have a proper winter too in some parts of China, and I can't imagine millions of people having their phone dying on them as soon as we get into sweater weather.
But obviously this left a bad taste in my mouth. This and having to ask permission to root my phone.
- YouTube
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.www.youtube.com
Daily driver work-from-home on Bazzite? Or something more mainstream (Debian?) and install Steam/proton?
My question is basically the title, but here are some more details.
My computer is used about 75% for work, 20% for personal use (almost entirely web), and 5% for gaming. ~2 y.o. midrange rig w/ Intel CPU, AMD graphics, 32GB DDR4 RAM.
For work, I need lots of straightforward things: video conferencing on Teams (web is fine), Zoom, Word document editing (web is fine), a bunch of other web apps, some light database stuff, etc.
Plus two things that are a bit trickier: OneDrive professional/SharePoint (so I'll need abraunegg's onedrive) and Excel 2024 desktop (web isn't good enough) for which I'll need to run Windows (10? Ameliorated, maybe?) in a VM.
But I also want to do gaming. I wouldn't install a kernel-level rootkit anyway (and I boycott Denuvo), so SteamOS-level compatibility should work great for my needs. I also have a Quest 3, so I'll want to do PCVR, which apparently works great (with Bazzite).
But I don't really grok what Bazzite being immutable means for using it as a daily driver for work/productivity. Under the hood, it's just Fedora 42, right? For immutable distros, you use flatpaks instead of apt install, and they're basically just "apps" that should "just work", right? Do I care about kernel modification?
Or, more to the point, I don't know what I don't know. After preliminary research on this all, I think my plan of going for Bazzite then adding abraunegg's onedrive and a Windows VM with Office 2024 will hit all my needs, but can anyone "sanity check" that plan, or compare the pros/cons with a non-Ubuntu-based alternative?
I'm good enough with computers that I should be able to tinker through the inevitable small challenges that will come up, but I don't really have enough time to do it twice if my initial plan is terrible. (I connect to a Debian server remotely using the terminal, so I have some background—but I needed to install a bunch of packages to get web app software running, and idk if I'll need that as a desktop user.)
Any advice much appreciated! And thanks for reading this far, even if you don't comment. 😀
Edit: thanks for the input so far! I'm turning in, but I'll read everything and reply to stuff tomorrow.
GitHub - abraunegg/onedrive: OneDrive Client for Linux
OneDrive Client for Linux. Contribute to abraunegg/onedrive development by creating an account on GitHub.GitHub
Pro of running an immutable distro is that it is much harder to break during daily use. The con is that you're pretty much setup to only use flatpaks and some things like abraunegg's onedrive aren't available as a flatpak.
Have you considered making the ~~Win10~~ Win11 VM a complete work jail? If you do all things work in there then you get a nice separation of private and work and won't have to worry about work apps linux compatibility.
edit: Windows 10 support ends on October 14, 2025
Windows 10 support ends on October 14, 2025 - Microsoft Support
Windows 10 support ends on October 14, 2025. Upgrade to Windows 11 now to ensure continued security and feature updates. Learn more about the transition.support.microsoft.com
Thanks for the reply!
A few thoughts:
I was thinking Win 10 EOL won't matter if the VM has no Internet access. Linux would sync the files for me, so the Windows VM can just run Excel (and maybe Word, since I'm setting up Office 2024 anyway) using the files synced by abraunegg's onedrive, so it doesn't need internet access. (Assuming there's a partition format that works well for both Windows and Linux that I can use for onedrive, which I assume is a "solved" problem by now—i remember this being hard 20 years ago.)
And his package apparently works in Fedora 42 with docker, which I assume should work fine.
But yeah; maybe what you're suggesting makes more sense. And that VM definitely would need web access, then, so Win 10 is a non-starter. The database work I do is likely easier in Linux, but that's likely easy enough to get data files out of the VM for just that work, I would expect.
Another question now comes to mind; I'm going to look this up now; how hard is it to copy/paste between Linux and a VM? Edit: As I'd hoped, this is also apparently a solved problem and sounds easy to configure.
I'm allergic to mixing private stuff with work stuff and there's a great thing to be able to shut work down at the end of the day. (Freeing up all your hardware for your private fun at the same time)
I’m by no means an expert on this, but I have used both Bazzite and Fedora workstation as my exclusive operating systems.
What I would say is that they’re both perfectly adequate for the tasks you described.
Personally, I’d say unless you prefer things handed to you, choose Fedora. I don’t have a problem with flatpacks, but I missed being able to easily use dnf. At the end of the day, though, there are ways around everything; you can still get what you need done on Bazzite.
In terms of kernel tweaks, etc. I barely noticed any difference in performance between the 2. Keep in mind that this was a relatively modern pc so performance wasn’t really an issue that I was looking out for.
Overall though, you’ll be fine whatever you choose. I also had to use MS office for work and it’s pretty much the one thing you can’t get working on Linux. You’ll have to explore your options for that, I ended moving back to a Mac because of Ableton live 🙁
The main issue you'll run into is nicher proprietary software being hard to install, but that's what containers are for. The main one I see is if you need to install some proprietary VPN client it gets annoying, but since you'll be running a VM anyway you can do some network trickery. My work's antivirus only works on Ubuntu and RHEL, proprietary kernel modules so it's got to be at least one of those kernels.
Linux is Linux, nothing's impossible to solve even with Bazzite's immutability. Worst comes to worst you make your own images and it's not that hard, you basically just fork it on GitHub and let the CI do its thing.
But do you have time to fiddle to make it work and take the risk, or do you want to play it safe? How confident are you with Bazzite's more advanced topics?
oh, shit:
The main one I see is if you need to install some proprietary VPN client it gets annoyingf
You're right. I have a crappy work-supplied Windows laptop that has exactly that installed. It would be nice not to need to boot into that when I need to work on the server from home, but it's not a deal breaker.
No other specific non-web-based software is needed for work, aside from the aforementioned OneDrive and Excel 2024.
Edit: Your last paragraph is exactly what I'm asking about; I'm capable of doing slightly involved tinkering, but it would need to be something that I can Google Fu through each step of someone walking through most of the steps. I don't know it at all well enough to go completely "off script" and just tinker with confidence.
It sounds like you're suggesting that going for something mainstream and getting it to work for games is likely a better option, particularly for someone with limited Limits experience?
Debian is far from being a mainstream workstation distro.
Debian is/was a very good server distro but there are lots of good alternatives to debian nowadays which may be much better for someones usecase. Debian is not the ultima ratio.
For me, I personally just run my workplace stuff in a VM (Debian 12) using KVM.
For excel desktop, OnlyOffice has a Desktop application that you can use to edit local files, which has pretty good compatibility with Microsoft products.
ONLYOFFICE - Secure Online Office
ONLYOFFICE offers a secure online office suite highly compatible with MS Office formats. Connect it to your web platform for document editing and collaboration or use as a part of ONLYOFFICE Workspace.ONLYOFFICE - Online Office Applications for business
The Universal Blue people emphasize containerized stuff a little too much. It's perfectly possible to add non-flatpak software to ostree distros, it just slows update processing down a little bit.
Since abraunegg onedrive is available as an RPM, you can just layer it on top of Bazzite; download the rpm and and then rpm-ostree install ./onedrive.rpm
If the RPM works on Fedora it will work in ostree distros too. Besides, if it foesn't work, you can just rpm-ostree rollback and it's like you never installed it, apart from things in your $HOME like config files.
The recommendation is to avoid layering wherever possible, not that you can't do it. Many apps are still a bit wonky as flatpaks, even if available.
like this
HeerlijkeDrop likes this.
Distrobox is much more suitable for installing RPMs on immutable distros, unless they need deep system access (e.g. Docker).
Bazzite even ships with DistroShelf for that purpose.
Just create a Fedora container for RPMs and a Ubuntu/Debian container for DEBs and install them there.
Can't enable mobile security settings
Hi there,I have an Asus Zenfone 10 on Android 15.
In this release of android a new feature named mobile security settings became available which are supposed to signal and protect against surveillance on the mobile network side, like at a protest.When I try to enable these settings on my device they are off again when I reenter these settings.
Do these settings have some kind of prerequisite? Are they working on your device?Thanks!
Wtf! Same situation for me!
Is this some more Asus bullshit? I am still mad that I can't unlock it
Edit: but also what is encrytion on normal mobile network supposed to be? Are calls somehow encrypted? I thought normal network is not encrypted anyway, how even, is there a key exchange or anything?
I worked for ASUS back in the late 00s, when they still made quality products. I did Linux, Server, EEEPC, and Level 2 support calls.
I can't recommend them anymore.
Sinaloa cartel used phone data and surveillance cameras to find FBI informants, DOJ says
A hacker working for the Sinaloa drug cartel was able to obtain an FBI official's phone records and use Mexico City's surveillance cameras to help track and kill the agency's informants in 2018, the U.S. Justice Department said in a report issued on Thursday.
like this
underrate170 likes this.
This should absolutely be held up as the example for people that say "I have nothing to hide."
The world isn't fun time sunshine lollipops, kids. It's literally inevitable that your data gets leaked or stolen.
You either naïvely trust the service you give data to more than you should, or you naïvely trust criminals to skip you when given the opportunity. There no evidence of a middle ground or other options in the matter.
windowsphoneguy
in reply to x0x7 • • •TVA likes this.
crimsonpoodle
in reply to windowsphoneguy • • •TVA likes this.
x0x7
in reply to crimsonpoodle • • •crimsonpoodle
in reply to x0x7 • • •jaybone
in reply to x0x7 • • •like this
TVA likes this.
Thebigguy
in reply to jaybone • • •TVA likes this.
Signtist
in reply to Thebigguy • • •like this
TVA likes this.
join
in reply to x0x7 • • •zjti8eit
in reply to join • • •TVA likes this.
Zerush
in reply to zjti8eit • • •TVA likes this.