Four pro-Palestine activists arrested after ‘car smashes through gates of F35 manufacturer’
A group named online as Palestinian Martyrs appear to have broken into the Moog Aircraft Group factory in Pendeford, Wolverhampton at 3:50am on Tuesday.
Dramatic footage shows a black four-wheel drive car smashing through two white barriers, before the activists set off red flares and climb a ladder onto the roof of a building.
The manufacturer was targeted because it builds parts for the F-35 fighter jets which the UK sells to Israel via a global pool, the group claimed. F-35 fighter jets have been used in Israel’s destructive bombing campaign in Gaza for nearly two years.
Four pro-Palestine activists arrested after ‘car smashes through gates of defence manufacturer’
The ‘Palestinian Martyrs’ say the Moog Aircraft Group, owner of the factory its members broke into, produces parts for F-35 fighter jets used in Israel’s bombing of GazaAlex Croft (The Independent)
☆ Yσɠƚԋσʂ ☆ likes this.
Four pro-Palestine activists arrested after ‘car smashes through gates of F35 manufacturer’
A group named online as Palestinian Martyrs appear to have broken into the Moog Aircraft Group factory in Pendeford, Wolverhampton at 3:50am on Tuesday.
Dramatic footage shows a black four-wheel drive car smashing through two white barriers, before the activists set off red flares and climb a ladder onto the roof of a building.
The manufacturer was targeted because it builds parts for the F-35 fighter jets which the UK sells to Israel via a global pool, the group claimed. F-35 fighter jets have been used in Israel’s destructive bombing campaign in Gaza for nearly two years.
Four pro-Palestine activists arrested after ‘car smashes through gates of defence manufacturer’
The ‘Palestinian Martyrs’ say the Moog Aircraft Group, owner of the factory its members broke into, produces parts for F-35 fighter jets used in Israel’s bombing of GazaAlex Croft (The Independent)
As long as they hurt goods and not people there is no problem.
That's not how deceptive authoritarian governments work 🤣
Xi Unleashes China’s Biggest Purge of Military Leaders Since Mao
cross-posted from: lemmy.world/post/35116322
Xi Unleashes China’s Biggest Purge of Military Leaders Since Mao
https://www.bloomberg.com/graphics/2025-xi-china-military-officials-purge/
Venice: Brad Pitt, Joaquin Phoenix, Jonathan Glazer Back Gaza Drama ‘The Voice of Hind Rajab’ as Executive Producers
Hollywood heavyweights, including Brad Pitt, Joaquin Phoenix, and Rooney Mara, have come on board Kaouther Ben Hania’s Gaza-set drama The Voice of Hind Rajab, as executive producers, boosting the film’s profile ahead of its world premiere in competition at the Venice Film Festival.
Also joining the film as executive producers are Dede Garner and Jeremy Kleiner of Pitt’s production outfit Plan B, The Zone of Interest director Jonathan Glazer, and Roma filmmaker Alfonso Cuaron. Several high-profile companies, including Britain’s Film4 and Saudi Arabian state-owned group MBC Studio, have also backed The Voice of Hind Rajab.
Brad Pitt, Joaquin Phoenix Back Gaza Drama 'The Voice of Hind Rajab'
Kaouther Ben Hania's film retells the real-life story of a six-year-old girl trapped in Gaza under Israeli fire, pleading for rescue.Scott Roxborough (The Hollywood Reporter)
A Dark Money Group Is Secretly Funding High-Profile Democratic Influencers
An initiative aimed at boosting Democrats online offers influencers up to $8,000 a month to push the party line. All they have to do is keep it secret—and agree to restrictions on their content.
https://www.wired.com/story/dark-money-group-secret-funding-democrat-influencers/
A Dark Money Group Is Secretly Funding High-Profile Democratic Influencers
In a private group chat in June, dozens of Democratic political influencers discussed whether to take advantage of an enticing opportunity. They were being offered $8,000 per month to take part in a secretive program aimed at bolstering Democratic messaging on the internet.
For years, Democrats have struggled to work with influencers. In 2024, President Joe Biden’s White House snubbed several prominent content creators after they lightly criticized the administration over its policies on climate change, Covid, Gaza, and the TikTok ban. Content creators who challenged Kamala Harris—including Hasan Piker, a well-known influencer on the left—were similarly unwelcome at campaign events.
The program kicked off last month, and creators involved were told by Chorus that over 90 influencers were set to take part. Creators told WIRED that the contract stipulated they’d be kicked out and essentially cut off financially if they even so much as acknowledged that they were part of the program.
https://www.wired.com/story/dark-money-group-secret-funding-democrat-influencers/
aerc mail client + mbsync problem (maybe)
Dear fellow nerds,
I recently started to use aerc, synched locally with mbsync.
Unfortunately, I'm facing a rather annoying problem with Gmail:
- I read emails (flag "seen") and move them to the archive;
- run the mbsync < account > command to sync;
- the mails are correctly moved, however, they seem to lose the "seen" flag, and they revert to unread.
Am I missing something? Any idea what could be the problem?
If it matters, I'm on a Wayland session on NixOS.
Thanks!
I tried a few things, and the aerc behaviour seems fine.
When I read an email, the "S" is added, and when I move it, the flag is preserved.
However, I observed 2 scenarios:
- If I read > mbsync > move > mbsync, the result is the expected one, having the mail red and moved on both server and locally;
- If I read > move > mbsync, the mail is red and moved locally, but it's only moved on the server. This means that the next time that I do mbsync, the mail will revert to unread locally.
One thing I noticed (which might be the problem somehow?) is that:
- The filename is initially something like "1756379541.12762_13.host,U=13:2,"
- After the reading changes to "1756379541.12762_13.host,U=13:2,S"
- After the moving changes to "1756379541.12762_13.host:2,S"
- After the sync changes to "1756379541.12762_13.host,U=3376:2,S"
- And eventually, after another sync the S flag is removed
This means that the difference in the 2 scenarios above, is that in the first case (the expected one) the mail is synced while having the U=13 present, while in the second case is synced with the U removed.
I tried to understand what's the meaning of that part (which looks like an ID) and if it's relevant in the process, but I didn't find any information, sadly.
For now, I think I will just use the imap connection rather than local, but if you have any insights, please let me know! 🙃
And thanks again for the debugging tip, it really helped to understand what's going on! 😁
That "U=xxx" is the IMAP UID, which is a unique identifier that message has in the IMAP mailbox. mbsync adds that to the filename just so it can track which (local) message corresponds to what message on the IMAP server.
When moving a message from one mailbox (folder) to another, this UID changes, because it's per-mailbox only. If you read the manpage for mbsync, it says explicitly that the MUA should strip the U=xxx when moving between maildirs, so the behavior of aerc here is correct.
In order to get to the bottom of this, you'd probably have to enable the debug output of mbsync and look at exactly what IMAP commands it sends to Gmail, then decipher the relevant command(s) by looking at the RFC, and then decide whether it's Gmail or mbsync's fault this gets lost. You could also contact the mbsync devs with this I guess.
I found someone complaining about the same issue, without getting a reply, 7 years ago, except that person was using mutt: stackoverflow.com/questions/52…
That doesn't help you obviously but from this we might guess it's probably not aerc's fault.
isync (mbsync) on gmail marks mail as new after move to another folder
I'm trying to use (neo)mutt combined with isync (mbsync) for reading my mail from gmail account. However I have slight issue. When I use mutt to move mail to another folder, the message is marked a...Stack Overflow
Made the switch
I have moved to Linux. Hopefully for a long time. Or even forever.
Chose PikaOS with KDE.
Based on Debian, but with latest kernels to improve gaming experience. And hopefully make it easier installing various Windows programs I need for work.
Everybody got to start somewhere.
To be honest, I have tried Linux before with Ubuntu(back when those eee PC existed). I also used Manjaro and Arch. Even installed Arch without archinstall. Didn't exist back then.
But I have to say Linux has definitely improved a lot. Almost everything just worked now. To be fair. I don't have nvidia gpu or Intel cpu anymore. Only AMD. So that could be part of why it went smoother.
One small annoyance I got was that my pc could not play from speakers when front audio port was connected by my headset.
And now I need to figure out how to install Filemaker 19 pro on my PC. So I can work from home. Winehq is not encouraging
Can someone also recommend a really good replacement for Directory Opus but for Linux? Paid or free software do not matter. As long as it functions like Dopus does.
Oh, with Filemaker my job built custom tool for invoicing, inventory management. Incoming and outgoing ordersystems and more.
So its not just to switch tools since with Filemaker I would connect to a Filemaker server at work to do all those things from home. While the server has a Linux version(CLI), the clients do not. Its all GUI.
Plus the software is dependent on Bonjour. Since Claris develops Filemaker and Apple owns Claris, Bonjour is used. So it would basically be installing bonjour through wine that needs to interpret apple stuff but in windows language. I think Winapps solution will be the best option for me. github.com/winapps-org/winapps…
For the other software… well if it’s from work, even though I’d also suggest to look at alternatives, e.g. learning Python/Tkinter or even low code FLOSS alternatives or Web based one… you might not have that freedom. Consequently I’m going to make an even more outlandish suggestion : if your work does not trust you to pick your own tool… maybe reconsider your workplace? I know, bit crazy but long term, might still be worth it.
Apologies for the life changing suggestions!
A lot of things I can switch to other software/use online versions. E-mail, excel, word, pdf.
That specific one cant be substituted yet. And switch work for just one software is well drastic 😅
What is more challenging IMHO but also more interesting… is reconsidering how you work, not just the tools you enjoyed so far. So yes, as others pointed in the thread there are custom file managers (beyond the default or popular ones) but, and please hear me out, there is also the command line. I know… I know it is VERY different but that’s a good thing! If you already looked and used an alternative file manager it means you are a power user. The command line (or CLI for short) is precisely a way to have MORE freedom to manager files. There are countless tools that one can combine to modify files. It will take a while to learn but it’s definitely worth it. A good starting point could be wizardzines.com/zines/bite-siz…
If possible I do not to work in CLI even if I have used mainly chocolatey and winget + similar tools in Windows for installing programs. Except games. Much more convenient writing
choco upgrade all
And having all software updated. Like with sudo pacman -Syu or sudo apt update folowed by sudo apt upgrade.
However, I do appreciate the suggestion going all CLI. I'm just not there yet now 🙃
GitHub - winapps-org/winapps: Run Windows apps such as Microsoft Office/Adobe in Linux (Ubuntu/Fedora) and GNOME/KDE as if they were a part of the native OS, including Nautilus integration. Hard fork of github.com/Fmstrat/winapps/
Run Windows apps such as Microsoft Office/Adobe in Linux (Ubuntu/Fedora) and GNOME/KDE as if they were a part of the native OS, including Nautilus integration. Hard fork of https://github.com/Fmst...GitHub
KDE is releasing its yearly report for 2024. Read about what we did 👩🏻💻, how much money we raised 💶 and the projects we started 🚀
2024 KDE e.V. Report - KDE e.V.
KDE e.V.’s latest report is out. In this issue, we cover the activities of our association in 2024. KDE’s yearly report gives a comprehensive overview of all that has happened during 2024, covering the progress we have made with KDE’s Plasma and appl…ev.kde.org
like this
like this
I fucking hate corporate use of emojis.
Just feels like some businesspeople were convinced it drives up "engagement", so that's what their underlings to do.
It makes me sick. I support any and all efforts to remove these ideas and the people who perpetuate them from the free software space.
Crontab problems... 😤 [solved]
Hi
When I setup a cron job like thiscrontab -e
*/1 * * * * echo $A_VARIABLE > /home/user/Desktop/test.txtno problem, the file is created whether the variable exist or not.
BUT doing
*/1 * * * * cd /Path/To/Script && Script.sh\#The Script.sh
echo $A_VARIABLE > /home/user/Desktop/test.txtDo not generate the file ! and The CRON log give me
(CRON) info (No MTA installed, discaring ouput)
and yes, the Script.sh has the execution bit.
Any ideas ?
Thanks.
Crontab.guru - The cron schedule expression generator
An easy to use editor for crontab schedules.crontab.guru
US manufacturing activity contracts for sixth straight month in August: 'It's survival'
cross-posted from: lemmy.ca/post/50889682
Respondents to the ISM's survey widely cited tariffs as putting pressure on their planning, sales, and costs.
like this
reshared this
Review of the Star Labs Starbook7: thanks i hate it
Hey, folks. I wanted to share my findings about the Star Labs StarBook 7 (AKA mk7 AKA mark vii). I've been daily driving this laptop for about 6 months.
Hardware
- Intel® Core™ Ultra 7 165H × 22
- 32.0 GiB memory
- 1TB storage
Display
I have historically been against hidpi displays for laptop because they just don't work 100% of the time on Linux. No matter how many brittle workarounds I've applied, hidpi displays have always hurt more than helped.
However, the StarBook 7 laptop absolutely nailed the display resolution. 3840x2160 is perfect for 2x integer scaling. When I ran Arch, I never ran into an app that was tiny or blurry. From Bitwarden to Claws Mail to Reaper. I'm happy to report everything worked fine. The ONLY app I was able to find that looked blurry was Cambalache for GNOME dev. All of this with ZERO workarounds, ZERO tweaks. It Just Works.
This has been the best hidpi support I've experienced. However, it's still not as good as running standard dpi. Despite the apps not being blurry, some apps like Bitwarden would forget the size of the window when I closed the app. This means, sometimes, some apps, would start in a tiny, little window, and I would have to grab a corner to stretch it out. Annoying.
When I switched to Guix Linux. UUff. This was bad. Almost all non-wayland apps did not respect GNOME's integer scaling. And when I got GTK apps working, QT apps were still broken.
So even though the Starbook 7 has the best hidpi support I've ever experienced, I will gladly take a more stable system, with less workarounds, and a larger amount of supported software over a slightly crisper screen.
Keyboard
The display was the best part of the laptop. The keyboard might be the worst.
This is easily the worst keyboard I've ever used anywhere, by far.
The keyboard is backlit, which is nice. The keys themselves feel a little light and wobbly, not great, but fine.
However, the actual output signals coming out of the keyboard hardware are trash. VERY often a key signal is sent more than once. The space bar in particular VERY often emits two spaces. But this happens with other keys too. I thought I just had to get used to typing on this keyboard, but no, it's not me, it's the keyboard.
The other trash thing about the keyboard is the placement of "home", "pgup", "pgdn", "end", and the freaking ~~print screen~~ sysrq key. This vertical row of keys is not very visible in the product pics on the website. But the placement of the ~~print screen~~ sysrq key in particular is HORRIBLE because it's right next to the right arrow key. And since the arrow keys blend together (another bad layout choice), I very frequently press the ~~print screen~~ sysrq key on accident.
And other thing. I keep saying ~~print screen~~ sysrq because there is no print screen key on this laptop. If you press the sysrq key, you may be fooled into thinking it's print screen. Do not be fooled. It actually sends a totally different keyboard event signal. This means you loose the ability to use GNOME's built-in screenshot tool. I never found a way to fix this.
The keyboard is so bad, that sometimes it interferes with entering my password. I frequently have to toggle the switch to view the password in plaintext that way I can see when the keyboard doubled up a character.
Other things
Cons:
- About 1 out of 30 times I startup the computer, Linux fails to boot. Like the laptop doesn't even try to boot the kernel. It gets stuck on the boot screen. There are no errors. I just have to force power off and try again.
- There is no fwupd support on non-official distros (Ubuntu is official).
- The laptop has BRIGHT ASS pure blue LED lights on the side and right in front of your face. The front facing LED in particular is horrible at night.
- The headphone jack is absolute trash, specifically the mic input. It is extremely noisy. Unusable even with software tweaks.
- Laptop is heavy.
- Laptop gets HOT, fans frequently need to go on.
- Battery life is abysmal
- Shits expensive
Meh:
- The trackpad is all right. It clicks.
- Coreboot is cool for being open source... but I didn't really notice any performance gains compared to the other big, bloated, firmwares.
Pros:
- Port selection is good.
- No barrel jack for power, just plain ol' USB-C
- The camera is decent.
- Wifi works.
- Bluetooth works...
like this
Am I the only one that thinks that USB-C power delivery is a con?
Having the option to charge with usb-c in a pinch is a really nice feature, but for longterm use I'd really rather usb-c plus a seperate barrel jack for power.
The barrel jacks on business line laptops are usually a separate module that if it breaks from catching the cord with your foot and ripping it out of the laptop, you can replace the module. I'm not sure I've really seen replaceable usb-c power jacks very commonly, they're usually part of the motherboard because it's a combined power delivery/thunderbolt port or something. Now if you rip the cord out the jack is totally fucked And you have to solder a new one on.
I guess how much people care also depends on whether they tend to use laptops in ways and places that are prone to causing damage to the ports. I've never damaged any port on any laptop I've ever owned, and it's unlikely I ever will because I like to keep the cables organized and out of the way (so it would require conscious effort to tug on them), and when I want to pick my laptop up, I always quickly run my hand around its perimeter to make sure everything is disconnected.
I do not claim that this is the correct way to use a laptop or that others should do the same, it is a tool that should be used the way its user needs, I just want to point out that for some usecases, this is simply a non-issue in the same way a non-replaceable CPU is - nothing's going to happen to it.
Also, my current laptop does have both a barrel jack (probably works, I've never used it) and a USB-C charging connector, so it's not necessarily an either-or proposition.
Sorry you hate it. Thanks for being honest.
I avoid all of those kinds of devices because the price in no way reflects the mediocre hardware that we'll be getting.
When we can get 4070 Lenovo laptops at Walmart for $1,000, it just doesn't make sense to be spending a comparable price on something without a fucking GPU.
We're lining the pockets of businessmen at that point. And don't be fooled: it's all business at the end of the day.
Republicans in Congress open probe into Wikipedia for alleged bias against Israel and Ukraine
In the letter, Comer and Mace referenced a report from the Anti-Defamation League, in which they allege that Wikipedia coordinated a campaign to manipulate entries related to the War in Gaza, which they allege advanced “antisemitic and anti-Israel information.”
"As our research showed earlier this year, antisemitism and anti-Israel bias on Wikipedia are a significant problem. We welcome the House Committee on Oversight and Government Reform opening an investigation into this issue and thank Rep. James Comer for his leadership effort to address this hate," in a statement released by ADL on Wednesday, Aug. 27.
The lawmakers also referenced a report from the think tank, Atlantic Council, which alleged that pro-Russia actors used Wikipedia to push pro-Kremlin messaging on its platform.
Republicans in Congress open probe into Wikipedia for alleged bias
Republicans in Congress said on Wednesday, Aug. 27, that they opened a probe into Wikipedia, alleging they had organized efforts to “inject bias.", USA TODAY (USA TODAY)
☆ Yσɠƚԋσʂ ☆ likes this.
[Solved] My OpenSUSE Tumbleweed install broke and I can't rollback
Update #1
I fixed my boot issue, but now I have to fix the issue with snapper not working right.
The boot issue: Something—I don't know what—added a removable drive to fstab, and the error was that drive couldn't be mounted at boot. I have two guesses:
- I formatted a microSD card using YaST Paritioner sometime before doing the distro upgrade.
- The drive might have been mounted during the distro upgrade, though I don't think it was.
At any rate, I commented out that line in fstab and it booted right up.
Mullvad is working fine when I boot normally. I guess it was only broken when booting a snapshot from before I upgraded it.
Update #2
I also fixed /.snapshots by adding it to fstab. Now it gets mounted on every boot, and this version of fstab will be in all future snapshots. I just took a manual snapshot for good measure.
I don't know which action caused the issue, so I'm going to list everything I did. I'm new to OpenSUSE Tumbleweed, and I haven't used Linux since like Linux Mint 17.
- I disabled KWallet because I got tired of typing in a password every time my desktop launched just for wifi passwords. I decided to just let Linux store them in plain text since my whole system is encrypted with LUKS.
- I did a distro update. (
zypper dup) After that succeeded, I logged off and back on. - I noticed Mullvad had a new version. They don't officially support OpenSUSE, so I downloaded the new RPM. I ran
rpm -e mullvad-vpnto remove the old one. That might have been a mistake since my notes say I used zypper to install it the first time. I installed the new one with zypper. It launched and connected just fine. - I had some trouble getting network settings to store/retrieve my wifi password, so I decided to reboot my system since I changed so much stuff.
- It wouldn't boot. I see a few "BIOS" and "ACPI" errors.
- Time to try out Snapper! I reboot and choose the most recent snapshot from before tonight.
- It boots, but when I try
snapper rollbackI getIO error (.snapshots is not a btrfs subvolume) - I get the same error trying to open the YaST snapshot viewer.
- I check
btrfs, and I see@/.snapshotsplus a bunch of numbered snapshots, of course. - I check
fstab, but I don't see an entry mounting anything on/.snapshots. - I do see a directory at
/.snapshots, but it appears just be an empty directory.
Mullvad seems broken with this snapshot. I can't connect to the internet. The mullvad-daemon won't start, so I think the killswitch is active. I've had to type all this on my phone.
What can I do to fix this? I just want to rollback to this good snapshot, and then I can worry about fixing Mullvad when the filesystem isn't read-only.
One month. That's how long it took me to break my system. ☹️
Is it possible that you didn't enable snapshots during installation of TW, and then turned it on later?
That seems to be a common explanation on the openSUSE forum when .snapshots is missing from fstab (found by searching for the error you are hitting). There are some threads with workarounds. Basically, mount the .snapshots subvol manually, re-try the rollback and then add .snapshots to fstab so it works in the future.
LTT Labs blog + benchmarks for linux vs windows performance AMD/Intel/NVIDIA
Part 2: lttlabs.com/blog/2025/06/30/is…
LTT Fourm discussion as well linustechtips.com/topic/161659…
They approached this from a noob perspective and the benchmarks seemed pretty rough. The blog has an overall positive tone on linux which is nice even though it got murdered in performance.
I'd like to see a follow up with optimizations, get some of the linux community involved to help setup an optimized linux test bench to go toe to toe with their "golden image" windows 11 benchmark setup.
They benchmarked a few distros against each other and it was very samey which I expected, the real difference is between the drivers/kernel and desktop environment since most distros come very light in terms of installed software.
Not bad. I take issue with the part of the article called "distro wars". There is no war, but I dont expect them to "get it". These cringelords seem to have a need to meme-fi everything, really dings the tone of the reviews. Am I reading a tech review or an opinion article?
Eeh
using the 24.04lts was an odd choice.
and it did prove odd when they noticed the drivers were out of date.
LTT Labs blog + benchmarks for linux vs windows performance AMD/Intel/NVIDIA
Part 2: lttlabs.com/blog/2025/06/30/is…
LTT Fourm discussion as well linustechtips.com/topic/161659…
They approached this from a noob perspective and the benchmarks seemed pretty rough. The blog has an overall positive tone on linux which is nice even though it got murdered in performance.
I'd like to see a follow up with optimizations, get some of the linux community involved to help setup an optimized linux test bench to go toe to toe with their "golden image" windows 11 benchmark setup.
They benchmarked a few distros against each other and it was very samey which I expected, the real difference is between the drivers/kernel and desktop environment since most distros come very light in terms of installed software.
Forget Linux vs Windows, the real question I have is why is Black Myth Wukong so poorly optimized that on a 4060 or 5060 it can't reach 60 FPS at 1080p even on Windows? Freaking unacceptable.
You would think coming from the mobile world, Game Science would be used to low-spec hardware, e.g. phones, but this game can't run well even on pretty new GPUs on PCs??? I had no idea this game had such abysmal performance. I wish people hadn't bought it, so it could've flopped
After about 8 months, I love this Android browser. Not Chrome, FF, or Edge based.
UPDATE: THIS USES GOOGLE WEB VIEW. DO NOT USE.
I can't figure out why nobody talks about this. I see all kinds of alternative browsers on here, but never this one. I especially like the color coded bookmarks for different categories (my news is gray, my searxng/swisscows and other search engines green, my tech solutions purple). It has anti-fingerprinting and a quick toggle for if you need to quickly adjust javascript or cookie setting to make a quick exception. There are lots of features. If anyone else has tried it, it would be interesting to hear your feedback too.
I've seen this when bopping around in the F-Droid catalogue. Never took it seriously because it didn't seem to communicate well what it was doing.
In general; I usually dislike using Chrome anyways....so much so that I hard disable Chrome on my device, oftentimes via ADB, and download a wide range of alternatives; Kiwi (Plugin enabled), Hermit ([Closed source] Forced Isolation of all domains/sites along a side of ad-blocking and web-app caching baked into the app wrapping it's renderer; which is, of course System Webview. Unfortunately this one is not open source, so I do not often recommend it here and while I trust it; your decisions may be different.) and Firefox (Plugins installed, seems to be replacing Kiwi because it's likely a dead/gone/depreciated/archived project.) I even use URLCheck from F-Droid itself as my "Default Browser" so that I have the power to review each URL and open it in a browser I feel is most appropriate to the context of my browsing and choose the browser I feel can best protect my privacy for a given site. One-off visits often go to Hermit; which promptly isolates away and forgets I ever visited the site while blocking ads with a lighter touch than most plugins I've seen that exist. If a site often breaks in Hermit; usually due to ad-blocking hostile scripts; I kick it over to Firefox where I have extensive plug-in tooling to defang the beast...including tools like JShelter, Canvas Blocker, LocalCDN, Chameleon, Decentraleyes and uBlock Origin.
What I do know is that Android System Webview is far more configurable than you might realize; and that it is absolutely possible to build a browser on top of it. Most importantly; Android System Webview IS NOT Chrome! Yes, it is extremely similar and it behaves mostly the same; but it is based on the Chromium project; which is basically what Chrome is before Google applies all of its own Branding, Customization, Policies and Application touches on it. Does Chromium project mirror what Chrome needs? Absolutely yes, but it does not follow Chrome exactly. In general; Android System Webview is a Web rendering component that other applications can call on and wrap their own code around. This means you are basically free to implement whatever other features you want around the webview; including adding plugins and other things like ad-blocking. My favorite closed-source lite-app browser Hermit does this; and I'm not seeing any significant privacy concerns with that one.
AutoHotKey Alternative on Wayland
The main barrier for me transitioning to Linux as my main OS is finding a suitable alternative to AutoHotKey (AHK) on windows. I use AHK for all kinds of automation but haven't found a usable alternative in Wayland.
Thought I'd check here to see if anyone has any suggestions?
I'm on hyperland, and I've configured ydotool to do some of this work. It can move the mouse, enter keyboard shortcuts and do a bunch of things that autohotkey can, however it is by no means a complete solution, or one that comes with sensible defaults. It's just a daemon and client, and you'll need to set it up to do what you want.
As far as I know there's no record and replay function, though you could likely script one.
Also, for triggering the scripts, you'll need to set your Desktop's keybindings to point to them.
For me, it filled the requirements that it was launchable by systemd unit, as the user on login.
I use it for a vairiety of tasks, but the primary one is typing out my clipboard as if I had pasted something. I rebound alt + shift + p to that, so I can paste windows login passwords or whatever in to Teamviewer/other stuff that doesn't accept a paste command.
GitHub - ReimuNotMoe/ydotool: Generic command-line automation tool (no X!)
Generic command-line automation tool (no X!). Contribute to ReimuNotMoe/ydotool development by creating an account on GitHub.GitHub
Republicans get court win over "green bank" funds
A federal appeals court sided with the Environmental Protection Agency in its effort to freeze billions of dollars and terminate contracts for nonprofits charged with running a "green bank" to finance climate-friendly projects.
The decision from the U.S. Court of Appeals for the District of Columbia Circuit, handed down in a 2-1 ruling, shifts the dispute away from the federal district court and into the U.S. Court of Federal Claims, which handles contract matters. For the nonprofits involved, including Climate United Fund, the ruling represents a major setback in their push to regain access to roughly $16 billion in frozen funds.
Trump Administration Gets Court Win Over 'Green Bank' Funds
The decision stands as a high-profile win for the Trump administration's EPA and a stinging blow to climate groups.Gabe Whisnant (Newsweek)
copymyjalopy likes this.
What distro do you game on?
What was the update? Getting address not found on both calyos.org and calyxinstitute.org which doesn't bode well
Edit: came back up. Update if it's down when viewed
Update: August 27 2025We are concerned that some users may have not seen the important message in this letter about CalyxOS’ current hiatus. Therefore, we are rolling out one last OTA update to devices currently running CalyxOS to reach as many active users as we can. You can read our post for more details about this update.
Apertus: a fully open, transparent, multilingual language model
Apertus: a fully open, transparent, multilingual language model
EPFL, ETH Zurich and the Swiss National Supercomputing Centre (CSCS) released Apertus today, Switzerland’s first large-scale, open, multilingual language model — a milestone in generative AI for transparency and diversity.news.epfl.ch
(solved, thanks guys!) "No key available with this passphrase" despite it being the correct passphrase
Edit: Turns out you guys were right, I entered the setup password wrong for LUKs. I got this new Logitech keyboard I got for a gift and I type around 170wpm, but I've been having issues with it kind of lagging keys for some reason. What I did was I opened up a notepad and typed in my password a bunch of times and noticed whenever I would type something such as "stain" for example, it would come out at "stani" despite me looking at the keyboard and knowing that wasn't what I was typing. So I encrypted my drive with the wrong password, but figured out how to decrypt it that way. Thanks for the help doods!
Hello! I have a external drive I've encrypted with LUKs that has irreplaceable backups of mine, and for some reason no matter which PC I try it won't unlock despite it being the correct password. It doesn't give me anything else in the terminal other than what I put in the title.
I recently just backed up everything onto the external drive from my computer cause I was distro hopping. It's worked fine on my PC, I saved the password so I was able to mount it no problem before, but now it won't mount on any other PC I try. It isn't the end of the world since I can just try and copy old data from my computers drive before the format since I haven't downloaded anything yet that could overwrite anything important, but I'd still like to be able to get this external drive unlocked. As I've said, irreplaceable files of mine are on it so I'm hoping to get it working. Thank you!
How Erik Prince is Trying to “Make Haiti a Hub for Mercenaries” | Haiti Liberte
Erik Prince, the founder of many mercenary companies since Blackwater, is looking to gain a lucrative foothold in Haiti through wheeling and dealing with unelected, illegitimate leaders as cynical as he is. It won’t end well. Photo: ABC News
How Erik Prince is Trying to “Make Haiti a Hub for Mercenaries” | Haiti Liberte
(Français) Erik Prince, 56, the founder of several mercenary companies beginning with the now rebranded Blackwater, might have Washington’s backing forTravis Ross (Haiti Liberté)
Linux and Secure Boot certificate expiration
Linux and Secure Boot certificate expiration
Linux users who have Secure Boot enabled on their systems knowingly or unknowingly rely on a ke [...]LWN.net
like this
Democratic congressman Jerry Nadler for New York will retire next year in move to galvanize generational change among Democratic party
Jerry Nadler, a Democratic representative from New York, will retire next year after 34 years in Congress in a self-proclaimed move aimed at galvanizing a generational changing of the guard in the party.
Nadler, 78, who represents one of New York’s wealthiest districts covering midtown Manhattan, said he had been persuaded not to run for re-election in 2026 after witnessing the implosion of Joe Biden’s presidential bid last year. The former president was pressured into abandoning his candidacy amid widespread doubts about his age and mental acuity. He was replaced by the former vice-president, Kamala Harris, who subsequently lost the election to Donald Trump.
“Watching the Biden thing really said something about the necessity for generational change in the party, and I think I want to respect that,” Nadler told the New York Times, which broke the news of his forthcoming retirement.
He told the newspaper that a younger replacement “can maybe do better, can maybe help us more”.
Democratic congressman Jerry Nadler will not seek re-election in midterms
New York representative will retire next year in move to galvanize generational change among Democratic partyRobert Tait (The Guardian)
CHECK DETAILS
Session is a FOSS messenger focused on privacy. No phone numbers, decentralized servers, and full end-to-end encryption. Perfect for anyone tired of surveillance-hungry chat apps. Secure, anonymous, open-source.
🔗 GitHub: SESSION - GITHUB
GitHub - oxen-io/session-android: Session Android - Onion routing based messenger [DEPRECATED SEE README]
Session Android - Onion routing based messenger [DEPRECATED SEE README] - oxen-io/session-androidGitHub
😅😅😅
kill --windows,
install --linux,
like this
Linux on my smart tv?
I have been rather unhappy with my smart TV's functionality as I feel it isn't smart for me but smart for the manufacturers. I just can't use it how I want to. I would love to overwrite the existing OS from Android to Linux. I've recently converted from Windows and loving Mint.
I haven't read too much regarding Linux smart tvs as my searches mostly come up with raspberry Pi and overwriting an Android box. I don't want to connect anything and just want my tv to boot up in Linux when it's turned on, and get some of my apps going. Is there a way to do this?
For reference I have a Sony Bravia with Android installed on it.
like this
I wish! I have a Samsung and I used to have an LG. One thing I anticipated which turned out to be on the nose is that these TVs stay operational just up until the maker decides they want your money again. I never bought into it to begin with. I only got a Smart TV to begin with because it has everything else I want. But I go straight to hooking up a computer. The apps on the TVs are all ooh and aah until a couple of years go by and then suddenly the apps are not compatible with the sites or backends what have you, and guess what? No more updates. You need a new TV despite the fact that yours is 100% perfectly fine, other than the inherent sabotage built in.
So that’s why I never even had any expectations. But I would love to find the best Linux distro for a media machine that my wife could learn to use. Right now I have to do all of it because it’s just browse to the files or load a playlist. I’d like something like Kodi or Plex but they have issues with one thing or another. I just want an SMB based connection in an interface that shows friendly thumbnails kinda like Nova player on Android. That app is highly underrated. Free, as far as I know open source and aside from a few control designs not being too great, the app is terrific. Kicks VLC’s butt. Why are they still designing the software like it’s 20 years ago and it’s on Windows XP?
Anyway I digress. Smart TV running Android or Linux would rock but I don’t expect it to be too feasible. But what do I know, because I’m not a professional dev.
The cheapest is to buy some android box with armlogic processor and install coreelec on it. You can do it for 20 bucks, then you have a kodi oriented linux distro on your tv.
Though I prefer to straight up connect my laptop to the tv with a small remote keyboard and have full computer functionality. I'm looking to change the laptop for a miniPC when the laptop finally breaks down. I would use a normal DE. Nothing specially suited for smartTV usage. But you get used to it pretty quick.
Do you guys just have flawless experiences or what?
It's been a week. Ubuntu Studio, and every day it's something. I swear Linux is the OS version of owning a boat, it's constant maintenance. Am I dumb, or doing something wrong?
After many issues, today I thought I had shit figured out, then played a game for the first time. All good, but the intro had some artifacts. I got curious, I have an NVIDIA GeForce RTX 3060 and thought that was weird. Looked it up, turns out Linux was using lvmpipe. Found a fix. Now it's using my card, no more clipping, great!. But now my screen flickers. Narrowed it down to Vivaldi browser. Had to uninstall, which sucks and took a long time to figure out. Now I'm on Librewolf which I liked on windows but it's a cpu hungry bitch on Linux (eating 3.2g of memory as I type this). Every goddamned time I fix something, it breaks something else.
This is just one of many, every day, issues.
I'm tired. I want to love Linux. I really do, but what the hell? Windows just worked.
I've resigned myself to "the boat life" but is there a better way? Am I missing something and it doesn't have to be this hard, or is this what Linux is? If that's just like this I'm still sticking cause fuck Microsoft but you guys talk like Linux should be everyone's first choice. I'd never recommend Linux to anyone I know, it doesn't "just work".
EDIT: Thank you so much to everyone who blew up my post, I didn't expect this many responses, this much advice, or this much kindness. You're all goddamned gems!
To paraphrase my username's namesake, because of @SnotFlickerman@lemmy.blahaj.zone and his apt gif (also, Mr. Flickerman, when I record I often shout about Clem Fandango)...
When some wild-eyed, eight-foot-tall GNU/LINUX OS grabs your neck, taps the back of your favorite head up against the barroom wall, and he looks you crooked in the eye and he asks you if ya paid your dues, you just stare that big sucker right back in the eye, and you remember what ol' Jack Burton always says at a time like that: "Have ya paid your dues, Jack?" "Yessir, the check is in the mail."
I agree that there should be a grace period after payments are stopped before they delete stuff. But I see no reason that they should provide you with free access to their service - if you haven’t paid, service is cut off.
But that is just my opinion.
Sept. 11 Victims’ Lawsuit Against Saudi Government Can Go to Trial, Judge Rules
In his ruling, Daniels noted that the two sides had different interpretations of almost every piece of evidence. But he endorsed the plaintiffs’ views of several key exhibits, including a diagram of an airplane found in one of Bayoumi’s notebooks. Citing aviation experts, the plaintiffs’ lawyers said the drawing and the calculations beside it showed how a plane might hit an object on the ground. The Saudis’ lawyers suggested that Bayoumi had drawn it while helping his son with homework.
Daniels said the plaintiffs’ evidence created “a high probability as to Bayoumi and Thumairy’s roles in the hijackers’ plans, and the related role of their employer,” the Saudi government. “In many instances,” he added, “it even appeared that Bayoumi actively injected himself” into the hijackers’ illicit activities.
9/11 Victims’ Lawsuit Against Saudi Kingdom Can Go to Trial: Judge
Information uncovered by plaintiffs has already undermined the FBI’s conclusion that two U.S.-based Saudi officials “unwittingly” helped al-Qaida hijackers after they arrived in America.ProPublica
Fedia and Piefed have baked in code to block their users from seeing our replies, posts, and comments, while allowing a form of one way federation.
US suspends most visas for Palestinian passport-holders, after 80 Palestinian officials were denied visas ahead of the United Nations General Assembly in New York.
Earlier in August, visitor visas were paused for people hoping to travel from the Palestinian territory of Gaza. This newly-reported decree would affect a wider group - including people living in the Israeli-occupied West Bank.
The decision was issued in a diplomatic cable dated 18 August, the New York Times and CNN reported.
US consular officers were told to refuse non-immigrant visas to "all otherwise eligible Palestinian Authority passport holders", the communication was quoted as saying.
That would apply to Palestinians hoping to come to the US for a range of purposes, including for business, study or medical treatment.
The move meant that officials would be required to perform a further review of each applicant, which amounted to a blanket ban on issuing visas to Palestinians, the New York Times added in its report.
US suspends most visas for Palestinian passport-holders, reports say
The new restriction comes after a group of Palestinian officials were refused visas for a key UN meeting in New York.James FitzGerald (BBC News)
I am web developer where can I get white label websites and other resources since I am solo
like this
Trump's use of National Guard in Los Angeles illegal, judge rules
A federal judge in California has ruled that the way President Donald Trump deployed deployment of the National Guard to Los Angeles this summer was illegal.
The ruling comes as Trump seeks to use National Guard troops in order to crack down on crime in other US cities and support immigration enforcement.
US District Judge Charles Breyer said Trump violated the Posse Comitatus Act, which limits the power of the federal government to use military force for domestic matters.
The law, first passed in 1878, prohibits using the US military in order to execute domestic laws, or assist with doing so. The law has limited exceptions, such as authorisation by Congress.
Judge Breyer found that the ways the Trump administration used the National Guard in Los Angeles violated these restrictions.
Trump's use of National Guard in Los Angeles illegal, judge rules
The ruling comes as Trump seeks to use National Guard troops in order to crack down on crime in other US cities.Kayla Epstein (BBC News)
Help Me Comprehensively Understand The "Big Picture".
There's just too much going on for any one person to understand it all. Never mind accounting for the geopolitical, economic, and cultural factors of every situation. Than there's the rapidly changing contexts. New technology, new science and physics, new species of bacteria/fungai. Rediscovering of ancient practices. Regional problems and solutions. I could go on and on.
I advocate for "futuristic solutions" but I acknowledge that transition will not be overnight or always linear.
So what is going on out there? That's what I'm asking c/climate@slrpnk
- What's going on in your local region / etc and what is the political or economic context.
- Which solutions are being implemented or developed
- Who is organizing and leading their community towards solutions
...
As a Canadian I'm aware that we're expanding our LNG/Fracking, mineral mining, and oil... First Nations groups are providing some pushback against those projects, but we can't expect them to hold the line on ecological protection (There's a clear fiscal incentive for them to give in).
davidsuzuki.org/what-you-can-d…
ief.org/news/how-to-make-minin…
cbc.ca/news/indigenous/leaders…
Canada also has and ongoing protest to stop old growth forest logging, which has gotten out of control. I honestly don't know what to think about our forest management, because I'm under the impression that logging can be done in an environmentally friendly way; but it isn't.
en.wikipedia.org/wiki/Fairy_Cr…
naturecanada.ca/news/press-rel…
Canada also has a lot of old hydro-electric dams which are bad for the rivers and their immediate environment.
ucs.org/resources/environmenta…
I'm hopeful Canada's growing role as a global commodity supplier will allow us to set higher international environmental standards.
I've also read online that there are already climate refugees from both rising oceans and regional droughts upending agriculture in the middle east.
lawfaremedia.org/article/from-…
Logging Emerges as Canada’s Third Largest Climate Polluter - Nature Canada
Report concludes that logging is Canada’s third-highest-emitting sector behind oil & gas and transportation greenhouse gas emissions in CanadaNature Canada
like this
stop doing the things we can't electrify
Or eliminate the problem in the first place. For instance walkable cities reducing transportation demand overall.
substitute a few industrial gases
What and why?
steel making without fossil fuels and it works
This is interesting! Can you please elaborate or provide a link? Where is it being adopted?
emissions are increasing more slowly than they would have without the effort, but we are ona trajectory which makes loss of major ecosystems quite likely and threatens the viability of agriculture as a basis for civilization
This is where I'm coming from. Outdoor agriculture is both harming the planet and about to become significantly less viable as the planet heats up.
As far as industrial gases, there mostly ones with fluorine in them. SF₆ and refrigerant are the biggies.
For steel, the big one that exists at pilot scale is the use of hydrogen to reduce ore instead of carbon. Seems to work OK and makes a good enough product for most use.
Indoor farming only really is viable for specialty crops like drugs and a few vegetables. I dont expect to see it used for the grains that feed most of the population. The room to lower the amount of agriculture comes from reducing meat consumption and the use of food crops as motor vehicle fuel.
pilot scale is the use of hydrogen to reduce ore instead of carbon
Ooh it's being done in Canada! cbc.ca/news/canada/hamilton/ar…
Indoor farming only really is viable for specialty crops like drugs and a few vegetables.
Yes and no. I garden. Hydroponically grown produce in my experience is higher quality, has long shelf life, and grows significantly faster. While cash crop commercial scaling may not be viable outside select crops, smaller household grows certainly are.
I fully agree though that mitigating livestock cultivation and biofuels are our biggest opportunities at present.
technical readiness level for hydrogen production is lacking.
adoption is slowed down by chicken egg problem (steam methane reforming vs pyrolysis/electrolysis)
but yeah. I sign your points.
Israeli protesters stage ‘day of disruption’ calling for end to war in Gaza
A majority of Israelis back ending the war as part of a ceasefire deal to free all remaining hostages, a sentiment mostly driven by concerns about hostages still in Gaza and the impact of two years of war on Israeli society and its economy.Most protests include some demonstrators calling for an end to famine and the slaughter of Palestinians, but they are usually a tiny minority. Polling this week showed that nearly three-quarters of Jewish Israelis partially or totally agree with the claim made by Israel's government that "there are no innocents in Gaza".
Earlier this month, another survey found 78% of Jewish Israelis said they were "not so troubled" or "not troubled" at all by reports of Palestinian suffering.
Large majority of Israeli Jews untroubled by reports of famine in Gaza, poll finds
Among the Arab public, 86 percent of respondents said they are 'very troubled' or 'somewhat troubled' about the situation in Gaza. The poll also found a much greater degree of concern among left-wing JewsLinda Dayan (Haaretz)
like this
Jesus... Three quarters of Israel's population think there are no innocent people in Gaza.
That's some evil shit right there.
Haiti at the Tipping Point: From Invisible Chains to Tangible Solutions | Haiti Liberte
Haiti at the Tipping Point: From Invisible Chains to Tangible Solutions | Haiti Liberte
(Français) Over the first two and a half decades of the 21st century, we have seen the emergence of Haiti’s “gangs,” as the U.S. State Department andKervens Louissaint (Haiti Liberté)
Report: Apple Demands Suppliers Switch to Robotics for Manufacturing
Report: Apple Demands Suppliers Switch to Robotics for Manufacturing
Apple is significantly accelerating the rollout of automation and robotics across its manufacturing supply chain, DigiTimes reports. While Apple...Hartley Charlton (MacRumors.com)
copymyjalopy likes this.
Static sites enable a good time travel experience
- Hacker News.
:::
Static sites enable a good time travel experience
A static site with version control history enables me to travel into any point in the project’s past and serve the site as it was back in the day.Juha-Matti Santala
Technology Channel reshared this.
Salesforce CEO says it cut 4,000 support jobs - and replaced them with AI
Salesforce CEO Marc Benioff has revealed the company has nearly halved its customer support workforce, replacing thousands of jobs with AI agents.In a podcast interview with Logan Bartlett on YouTube, Benioff brutally stated: “I need less heads,” noting how instead of using human power, Salesforce is now using AI to process around 10,000 leads weekly.
Yet in the same interview, Benioff noted a lack of human resources had caused the company to accrue a backlog of 100 million uncalled leads over 26 years.
Salesforce CEO says it cut 4,000 support jobs - and replaced them with AI
Salesforce has cut 45% of its customer support workersCraig Hale (TechRadar)
ShimmeringKoi [comrade/them]
in reply to geneva_convenience • • •geneva_convenience
in reply to ShimmeringKoi [comrade/them] • • •Yeah it's always a bit saddening when vandals stop before unleashing actual destruction on the facility.
Though I'm not going to criticize people risking prison sentence for not risking a far heavier prison sentence.