New York lawmakers, immigrants’ rights activists and religious leaders were arrested on Thursday at protests both inside and outside the complex in lower Manhattan where federal officials have been routinely detaining immigrants amid the Trump administration’s anti-immigration agenda.
At least 70 demonstrators staged a direct-action protest to block access to and from the underground garage used by Immigration and Customs Enforcement (Ice) to transport people arrested by the agency. The nature of the protest prompted the New York police department (NYPD) to begin arresting people sitting in front of the access ramp.
Even 47 years later, this thing gets me hyped. The “Master Component” had a 16-bit microprocessor?! Three-part harmony music? A display they called an “extraordinarily high level of resolution”? That sounded like the future. Sign me up.
And when they start hyping up ROM cartridges to a general audience, most people probably had no clue what that meant. But it must have felt like home electronics had just landed on the moon.
This was the first real console war: Intellivision vs Atari 2600. And wild to think—two years ago, Atari finally bought Intellivision.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
Edit: In my experience Piped or Invidious gets rate limited often and stop loading videos for a while and I need to change instances. Freetube doesn't have that problem, the only times videos stop working is when youtube changes something, when that happens I use Freetube to grab the video link and run a script to download with yt-dl and watch on the mpv player.
::: spoiler script that I grabbed on the internet
\#!/usr/bin/env bash
# Directory for downloaded videos:
DL_DIR="$HOME/Downloads/yt"
mkdir -p $DL_DIR
# Video player:
\#PLAYER="xdg-open"
PLAYER="/usr/bin/mpv"
\#PLAYER="/usr/bin/smplayer"
# Downloader and options:
YTDL="/bin/yt-dlp"
YTDL_OPTS=(--no-playlist -S "res:1080" -N 5 --add-chapters)
YTDL_DIR_OPTS=(-P "$DL_DIR")
set -e
CMD() {
printf "[CMD]: "
printf "\"%s\" " "$@"
printf "\n"
"$@"
}
# Get URL from clipboard if run without argument:
if [ -z "$1" ]; then
URL="$(xclip -o -sel c)"
# CMD qdbus org.kde.klipper /klipper org.kde.klipper.klipper.clearClipboardHistory
else
URL="$1"
fi
# Get video filename
printf "[URL]: %s\n" "$URL"
FILENAME=$("$YTDL" --get-filename "${YTDL_DIR_OPTS[@]}" "$URL")
printf "[FILE]: %s\n" "$FILENAME"
# Download video
CMD "$YTDL" "${YTDL_OPTS[@]}" "${YTDL_DIR_OPTS[@]}" "$URL"
# Play video
CMD "$PLAYER" "$FILENAME" >/dev/null 2>&1
I also configured a cronjob to clean the directory everyday. :::
Yea that's the thing I'm more looking for. If I want to share a video with someone, I don't want to have to send them an app to download first, I want to redirect to a private site in a browser that they can then choose to use how they wish.
Got it. In this case yeah Freetube is not a solution, the person would need to download Freetube and install Libredirect on the browser(wich means on mobile the person need to use firefox).
Honestly the instance that worked better for me with better uptime is inv.nadeko.net
Broken link, you redirect to the far-right site "Rumble." Tankie.Tube is also a peertube instance, I'm looking for private frontends for YouTube that function like XCancel does so I don't have to worry about trackers. I've seen piped, invidious, etc, wondering which is best.
As a side-note, tankie.tube doesn't have an auto-block as far as I know, it's more just a space for communists to share communist media.
Kinda, in the same way "commie" and "pinko" are pejoratives for communists like "tankie" is. It's just a way for anti-communists to hurl insults towards communists, and some communists have now jokingly begun referring to themselved as tankies as a response. It's meaningless beyond the fact that it's a pejorative.
If liberals genuinely want to understand and confront the rise of the far right, then rather than smearing the left they should perhaps reflect on their own faults.
Non plus ultra: Download the video and then upload to whichever PeerTube instance you use. At least if you're confident enough that this won't cause you legal trouble (e.g. cases like "fair use" should be safe).
FreeTube has a neat function to download comfortably (but make sure to pick an option with both audio and video).
Do you mean for sharing links on Lemmy/the Fediverse? There was discussion around this a while back and in the end the consensus was that it was most useful to just use the direct YouTube link as the primary, then optionally include a link to an alternative front-end. That way it was easier for people to use their own preferred front-end, and it avoided a problem we were sometimes running into where enough people would try watching a link at the same time that it would overwhelm the alternative.
Thats what fucken happens when your crumbling empire desperately mocks its own allies and attacks them through trade.
We coulda had a bad bitch, coulda been an impenetrable western continent of free trade, travel, and culture. But motherfucker racists and fascists need to divide their fellow people, on this isolated rock, floating in a vacuum.
That US ambassador was ambassador in the Netherlands previously and the press there let him enjoy that position for a good 30 minutes until they buried him and he never recovered.
Reporters in the Netherlands clash with the new US ambassador, Pete Hoekstra, over controversial comments he made in 2015, in which he said the 'Islamic move...
Libreboot supports the Dell 3050 Micro and the Lenovo T480. I was wondering, since it requires the FSP blob, could it be a backdoor? Does anyone know how it works? Compared to the T440p and 9020, those boards are 100% free BIOS, but lack newer microcode updates.
By its limited scope of just initializing the chip, it seems a lot more benign than Intel ME, which would be a jucier target than the FSP. But no independent audit has been completed on it to my knowledge. Purism got started with an attempt to reverse-engineer it (legitimately without the leaked code!), but Intel told them to take it down, which is a bit troubling.
Couldn't you just place a sticker on top? I know that you'll either not get the led light or it's gonna look a bit funny in the dark if part of the windows logo shines through if the sticker is not thick enough, but you can place a tiny tux sticker there!
One option is to pull the keycap off and paint over it. If you feel really crafty you can sand off the coating to make whole keycap translucent and use a stencil. Personally I don't look my keyboard that much that it'd bother me and it's made by microsoft anyways, their ergonomic keyboard is the best one I've used so far.
"Cute little thing like that, yeah, I'll grab 20, one for each keyboard in the house, a few at work, a few left over for harmless pranks SEVENTY NINE DOLLARS clooose tab" I'm sure the quality is nice but I'm just gonna scribble Tux in with sharpie.
Since it was $79 I assume you just typed 20 in the quantity, but if you do the multiple quantity discount for 10 stickers it's half as much. $2 per is still a bit on the expensive side, but it's not nearly as bad lol.
I wish more people would. I think it's ridiculous that we've put up with buying all these tools and appliances that come with ads like pimples all over. Pisses me right off.
Also e.g. the lobbying around ACPI breaking suspend to ram sometimes. Funny little Bill Gates quote on that:
One thing I find myself wondering about is whether we shouldn’t try and make the “ACPI” extensions somehow Windows specific. It seems unfortunate if we do this work and get our partners to do the work and the result is that Linux works great without having to do the work. Maybe there is no way to avoid this problem but it does bother me. Maybe we could define the APIs so that they work well with NT and not the others even if they are open. Or maybe we could patent something related to this.
Leaders of major tech companies, including Apple, Google and OpenAI, praised President Donald Trump’s pro-business agenda at a White House dinner on Sept. 4....
I mean, what is he supposed to do. The orange man threatened to put Zuckerberg in jail for the rest of his life if he doesn't comply. I have not very much hope left for the upcoming testimonies regarding Steam, Twitch, Discord and Reddit.
"We are watching him closely," Mr Trump wrote in his new book, "and if he does anything illegal this time he will spend the rest of his life in prison - as will others who cheat in the 2024 Presidential Election."
The former president made the claim in a new book, titled Save America, which is a collection of pictures and anecdotes from his presidential campaigns and term in office.
He wrote it in a book (or his writer lol), shortly before he got elected, about a year ago. Look for "Trump Zuckerberg jail threat", I don't know which source to cite here.
If you have any power at all, complying with the blatant fascist is treason. You know what happens next. Think of all the people who have virtually no power, who can be beaten, imprisoned, deported, without consequence. Chuds like Zuckerberg and Gates pave the way for that. They have enough money and power to insulate themselves.
Even fucking Musk parted company with the ghoul emperor. Imagine having less spine than someone who bought a social media platform so people would stop making fun of him (didn't work, obv).
You are right, but I highly doubt that he cares enough considering the quote I posted earlier. He probably also has a shitload of staff around him telling him what to do, whose life also depend on him complying.
Also, Musk bought Twitter to influence the outcome of elections, not for being a petty child that doesn't want to be insulted online. Well, maybe, but that's not the whole story here.
No one rich enough to be in Trump's vicinity actually believes any of the glazing they do to him. They're all executing the very basic strat for dealing with a baby man: stroke his ego -> get what you want.
As far as interacting with other sociopaths goes, my guess is trump is refreshingly simple for them.
He wouldn't be a billionaire if he were a good person.
But....to his credit, he did publicly say recently that he wants to have given away 99% of his wealth over the next 20y, and says he doesn't want to die rich. I am ok with making that the bar for being remembered. Provided it's not to his own foundation.
gates has put his money into a charity to protect his money; charities are only required to share a pittance of their wealth by law and lots of oligarchs have been putting their money into charities because of it.
it's troubling to read that people are actually buying the bullshit that the pr firms are putting around this activity.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
I recently bought my first mechanical keyboard, after having used my razer for 8 years, and i was looking into different keycaps, but i ended up having a hard time finding a good keycap set that is of good quality, and that i also liked in terms of colors, and has a super key or something like that. The keycaps that i ended up settling on didn't have a super key, so i just ended up putting the windows menu key on the super key, so that it atleast looks a bit more generic than the actual windows key. It's too bad they're hard to find, but i guess it makes sense since there is probably very little demand for it. Another idea is to maybe put a sticker on it or something.
I still don't get this I don't think I've ever accidentally pressed it while playing a game, and I am someone who constantly presses every wrong key while typing
I remember playing an FPS game.. Heretic? Shadow Warrior? I would play it without a mouse. Alt would be a modifier on the arrow keys for strife (sidestepping). Spacebar to shoot, and you're set for disaster.
Space Cadet Pinball was another one. It was nice playing with Ctrl, on the corner. But hit the Win key and you instantly lost focus of the window.
If I cared that much, I could have bought a blank keycap for an extra buck when I bought my keyboard and banished that thing forever. (I own a Unicomp New Model M 103-key, which only has one Windows key to begin with, and the manufacturer will happily sell you blank or custom-text keycaps. Unfortunately, while they do sell a set that includes Tux keycaps, they're sized for a 104-key.)
My Thinkpad has the Windows logo on the bottom bezel under the display, as well as this. Mostly doesn't bother me, but it does feel a bit wrong for a laptop that all traces of Windows have otherwise been erased from.
And if not, maybe take the money you saved on a Windows licence and treat yourself to a better keyboard. It's worth spending a bit on your primary input device, the thing you use the most.
For anyone sadly stuck on Windows, please, please for fucks sake don't pay full price for a license. Go grab an OEM key from an authorized reseller for like $20.
There's some limitations on how many machines you can use it on simultaneously. That's it. Otherwise it's a full valid license at less than 1/4 of the price.
Even better, just use MASgrave and pay nothing. Yo ho ho.
The GMMK Gaming Keyboard was the world's first fully modular mechanical keyboard. Our hotswap keyboards and accessories are built to provide ultimate ergonomic comfort, performance, and customization for an unparalleled typing experience.
I used to have this really awesome early 2000's transparent blue plastic keyboard with all the newest media keys. The only problem was that it had 4 windows keys on it! One on either side of the spacebar. The right side of the spacebar was Alt, Windows, Context menu, CTRL. That was a bit weird but it was alright. The next placements were crazy though. Someone figured there was space for more keys right below the Delete, End and Page Down keys but I guess they couldn't really figure out what would be best for there so they put a 3rd Windows key, a 2nd Context Menu and then a 4th Windows key right there. This was pretty close to the arrow keys and if anyone remembers gaming in the early 2000's, pressing the windows key accidentlly would often just crash your game completely. If you could get back into it, it could take quite a while for it to respond again. So if you were playing something like Warcraft 2 multiplayer, that button was a fucking nightmare.
Ugh, I loved the colour of that keyboard so much I put up with all those windows keys.
edit: I can't believe I found it! I've tried searching for this keyboard a few times, but finally found proof on this site!
Background:
Multimedia/Internet keys are additional function keys on PC keyboards that either invoke specific applications like browser, e-mail, media player, etc. or invoked certain function for t...
Wow, Win98 logo and media buttons? Truely between eras.
I actually like the context key above the arrow keys, another method of effectively right-click is nice. Those Win keys are crazy though, that's the perfect place for extra function keys. Imagine having f13 & f14 that you can bind to anything without worry!
I did't know much about the German keyboard layout but I know the Czech one, which is derived from it (we both use QWERTZ) and was able to look up most of what I didn't know.
So, the keyboard has 4 layers: default, Shift, AltGr, AltGr+Shift (the fourth one is not standard but is recognized by xkb; in Czech I use it for custom character mappings, in German it is standardized but Linux-only).
Default layer prints lowercase letters a-z and äöüß, numbers and the symbols in the lower-left of each key.
Shift layer prints uppercase letters A-Z and ÄÖÜ and symbols at the top left of each key.
Caps Lock only affects letters.
AltGr layer prints lower-right symbols, most of which are only populated in a later version of the layout.
As you can see, AltGr+2 produces ², and AltGr+3 produces ³. I think the full-size "2" and "n" are misprints. My old Czech keyboard has some errors too.
we have lots more diacritics so the number row only prints numbers on its Shift layer (most people therefore use the numpad only)
to print rare diacritics (ó, ď, ť, ň, and German ä, ö, ü), one has to first press the corresponding modifier key (´, ˇ, ˚, ¨) like on typewriters
an alternative for common capital diacritics (á, é, ě, í, ú, ů, ý, ž, š, č, ř) is to briefly turn on Caps Lock (advantage over typewriters)
pressing the ˚ key twice prints the degree sign (°) twice (Windows) or once (Linux)
there is a bloody dedicated § key but we need to press AltGr+7 twice, then backspace (or Alt+96) for a grave (`), which is part of ASCII and used in Markdown
physical keyboards almost always reserve the right side of the keys for the English-US layout (very confusing for novices) so one has to type in the AltGr layer blind (except for €); it contains useful symbols ([]{}\<>|\€$@#\^&×÷`) as well as useless ones (Đđ – these are Slovene, why not the Slovak Ôô?), leading people to prefer Windows-only left-Alt+numpad codes (such as Alt+64 for @) that use the obsolete OEM-1252 codepage (the Unicode extension has to be enabled via registry and Alt+letters hex codes get passed to programs anyway, often defocusing the input element). I only found a Slovak one on Wikimedia Commons
some lazy manufacturers combine the Czech/English and Slovak/English layouts, which are similar except ľ, ť and ô, leading to 5 (!) symbols per key, 3 of which are irrelevant unless you switch layouts
Gboard for Android offers QWERTY for Czech, which looks normal (hold for diacritics, potentially swipe for ě and ů) and the unpopular QWERTZ-PC, which has all the physical keyboard's quirks, but its "Czech QWERTZ" is based off German QWERTZ, containing ú and ů but not the other diacritics for some reason. All other keyboard apps with Czech language layout get this right (hold for diacritics, potentially swipe for ě and ů)!
The "n" is probably a misprint, AltGr+2 prints "²" and AltGr+3 prints "³" in the German layout; it can be customized to actually print "n" in xkb though.
I mean, if the redundant Windows keys produce different codes, it could be worth a lot to macro enthusiasts. The model exists with an English QWERTY layout too:
The picture seems to be from 1998 so you'll likely need a passive DIN to mini-DIN adapter as well.
If you want an alternative, lab label tape is a bit pricy but is super durable, comes in fun colors, doesn't leave residue, and sticks for practically forever.
The "sticker" is actually an off-cut from a laptop skin from my other laptop (which also runs Linux, and also has a sticker over its Windows key 😛), so it's held up pretty well
My keyboard came with both windows and Mac keycaps, so I put the mac one since it isn't a corporate logo. Plus the symbol signifies a culturally significant sight in my country.
I've had this laptop for some years now and I don't remember why it has the ~~derpy~~ cute Tux, but I think it's the default one. tuxedocomputers.com/en/Individ…
Individual logos and keyboards: My TUXEDO. My Style. Individual keyboard laser etching and logo printing A TUXEDO is much more than just a Linux notebook. A TUXEDO is your personal and longtime companion for work or private use. We therefore ...
Why is there a Win-Lock option? I get Caps Lock and Fn-Lock but is there any other reason besides saving a finger for the all-important Win-Ctrl-Alt-Shift-L shortcut to open LinkedIn? /s
Not as easy on a laptop, like this is. Usually a pain in the ass to replace laptop chicklet keyboard keys, if you can even find a replacement without a windows icon
Let's pray for the day that future generations will know that to be the Super key, but like the floppy disk icon for 'Save' they won't know why it is what it is.
I don't know what I do to keyboards when I use them for a really long time, but I have the exact same laptop frame and keyboard and most modifier keys are unrecognizable and half of the WASD keys are rarely used keys because I fucked up the keycaps while cleaning and I got other keys off the keyboard in place of them. So anyways, my Windows key is abused beyond recognition and you can't tell it was a Windows key.
4 years and 3 months still going strong. I use the touchpad a ton too and that coating on it has come off too, but it's perfectly usable. It also surprisingly lasted two pretty bad falls with just 1-2 minor cracks that I had to open the laptop up so that i can super glue the cracks just to ensure the cracks won't spread from future vibrations.
Visual condition is pretty unappealing, even a bit bad: the erased keycaps, the lifted coat off the touchpad and one visible crack, but it runs just as it did the day I got it
4 years? My laptop is from 2018 (with only the battery in a shitty condition), my mom had a laptop from ~2004 in 2021 (until I embarrassingly fried the motherboard when replacing the hdd). Electronics last forever if you don't murder them.
You can possibly get real creative with developing different scratch styles. From intentional needle drawing to the plastic equivalent of stonewashing jeans.
My bad, didn't explain it well in my initial comment
I broke my A and S keys when cleaning: because the WASD keys on these keyboards are transparent, I could see all the hairs or dirt under them and once every 4 months let's say, I was pulling them off
And one day they didn't wanna reliably clip back in place anymore
So now I have Right Ctrl on A and Right FN on S to replace the keycaps
So, they're basically newer keys in there, and also they are not transparent like A and S were
I've put a GNU sticker over one, and a Tux sticker over another. I should see if there's a Debian spiral sticker I can get (or even custom keycaps) for future keyboards.
There's the german instance feddit.org. its filled with cryptozionists but i think the post would not be deleted. I think they also have some city-specific comms, I for sure saw a hamburg comm.
Edit: don't link to lemmygrad though they're allergic.
Either is fine, but the image you linked is hosted on lemmygrad.ml, if they notice the URL they will have a strong reaction.
I would advise against making an account on there but a federated instance, and not to engage them unless necessary. They are extremely rude people even for germans. But, it would probably be more visible to people that can go there.
I could try to post some stuff there tomorrow, however I'd need to make a new account and some alone time which is pretty much nonexistent for me nowadays. But if you need help please do reach out.
Sorry another edit: lemmygrad is pretty widely defederated, meaning you can see other peoples posts but they cant see yours. If you want visibility a lemmy.ml or lemmy.blahaj.zone account might be better, blahaj federates with feddit.org for instance.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
Is there more software that, like TrackMeNot and AdNauseam, generate random internet activity so as to reduce the accuracy of any profiles tracking companies keep about you? E.g. software that carries out complete plausible-looking surfing journeys in the background: not just issuing searches (like TrackMeNot) and following ads (like AdNauseam), but also clicking on other links, scrolling, going back, perhaps even watching a YouTube video every once in a while and browsing Facebook? (All this, of course, respectful of the environment and the limited resources of small projects.) Or apps for the smartphone to generate false but plausible-looking position data and the like?
(Background: As many of you know, trackmenot is a browser extension that enhances your privacy by generating random search queries in the background, watering out the profiles that Google, Microsoft (and Yahoo, Baidu and AOL) have of you. It's available in the Firefox extension store; whereas for Chrome, Google has banned it from its store for unfathomable reasons. There's also AdNauseam, which works towards the same goal by randomly clicking ads in the background.)
Download TrackMeNot for Firefox. An artware browser add-on to protect privacy in web-search. By issuing randomized queries to common search-engines, TrackMeNot obfuscates your search profile and registers your discontent with surreptitious tracking.
I'm actually not in favour of obfuscation methods, as recent events have shown - authorities questioning a dude for wearing the same innocuous shirt?
Random traffic might turn out to be 'traffic of interest' for just being the at the wrong place, wrong time. I would prefer actual strong cryptography and isolation.
I agree, it could be a last resort when things like ghostery or such fail, but otherwise there's enough crap saturating the wires, no need to artificially inflate that
authorities questioning a dude for wearing the same innocuous shirt?
Why wouldn't they tho? Both persons had the same shirt on. That seems like a no brainer to me. Maybe I'm missing something. It's one of the reasons when I go out in public, I do not wear clothing that are emblazoned with logos, graphics, words, etc. For one, it doesn't do anything for me to wear logos, graphics, words. To me, it's akin to having a political yard sign or bumper sticker. What do you gain from it? What's it do for you? Some guy wearing a t-shirt with a cannabis leaf across the front, again why?, and it's an easy identifier and puts another tick mark for complimentary evidence.
Maybe I should clarify - I'm not a fan of human noise (there's probably a more precise term) - I'm more in favour of privacy/anonymity in the midst of actual, randomized noise, that isn't just random human activity.
I don't even mean t shirts with a logo. It could've been a pair of jeans on a specific date at a place in conjunction with 5 other (random obfuscated) things that a poi also happened to do. Like googled 'how to fold a swan' or whatever.
Even if you didn't do these things but was instead random generated traffic, it would generate unnecessary attention.
One might argue that if enough people adopted such methods, authorities would have too many leads to follow up. But then again, the chances of a random string of generated activity coinciding with that of a poi isn't high, so there likely will be a manageable number of leads.
Even if the number were higher, they have proven to have no qualms about skipping due process. As long as they might've gotten the actual poi, they have no problems subjecting many more unrelated to the same treatment because everyone is some sort of terrorist now.
They could also arrest you just because you have higher than normal randomized traffic and activity that you can't or won't answer for.
"Why did you search how to fix a sink leak and then how to fold a parachute within 2 minutes of each other?? You must be a terrorist generating random activity to hide your true actions. What do you have to hide?" - "found coke stuffed in all the couches and beds boss"
They could also arrest you just because you have higher than normal randomized traffic and activity that you can’t or won’t answer for.
I hear what you're saying, and I'm not going to call it paranoia, however, that isn't in my threat model. Entities that can come into your home, arrest you, and ship you off to Guantanamo for buying a parachute and a drain kit for the sink are not in my scope. Frankly speaking, that is probably not in 90% of most people's threat model, who care about privacy, anonymity, and security. Those entities don't even need to fabricate an excuse like a couch full of coke, to give you that full Guantanamo experience.
To tell the truth, I probably couldn't account for 75%+ of the websites I've visited just today. When I get to researching something, it's usually pages and pages, from many, many different sites. Highlight, search, read, nothing here, go back, highlight, search, bingo! Now for more in depth reading. Highlight, search....ad nauseam. This process happens very quickly. I don't watch TV at all, and I don't read fiction. 99.99% of what I do read tho, comes off the internet. So, they'd have to sift through a bunch of data.
Even if you didn’t do these things but was instead random generated traffic, it would generate unnecessary attention.
I'm quite certain that all of my privacy, anonymity, security, and obfuscation efforts has put me on someone's list, but again, that's not in my threat model. I'm not hiding from the government. I send them tax forms every year. I vote prolifically in both local and nationwide elections. I pay property taxes, etc. They know who, and where, when it comes to finding me. If I were a person of interest, they'd come visit. Now, I'm certainly not going to overshare with them in the least either. Hell, I'm not hiding from anyone. I'm just preventing unauthorized access. That is what keys and locks do.
A nonprofit organization dedicated to advancing human rights in digital spaces across West Asia and North Africa — is warning that Israeli-linked software secretly embedded in Samsung phones across the MENA region poses a serious surveillance threat.
According to SMEX, Samsung’s A and M series devices either come preloaded with the app “Aura” or install it automatically through system updates, without the user’s consent. The application reportedly collects a wide range of personal and device-specific data, including IP addresses, device fingerprints, hardware details, and network information.
In 2022, Samsung MENA partnered with Israeli tech company IronSource, integrating its Aura software into Galaxy A and M series phones across the region. The partnership was publicly marketed as a way to “enhance user experience” with AI-powered apps and content suggestions.
We have reached the point where it feels safer buying a random Chinese phone
1) they got rid of that choice for you: the american carriers has pre-complied with trump by blacklisting all chinese phones based on their imea numbers; it no longer matters that it's technologically feasible for it to work in the united states. so now, if you want premium phone quality but 1/3rd the price; you must buy an american brand and the full price tag.
2) you don't have anything the chinese gov't wants, so they don't care about keeping tabs on you. also buying into the propaganda that they're tryping to keep tabs on your carries with it the implicit acceptance that you're okay with the american gov't keeping tabs on you.
that's the one loophole in this effort to black list chinese branded phones; that non-chinese brands that use the same hardware are allowed on their networks and, until recently, i was looking for an oppo or oneplus that could leverage this loophole.
you're fucked if you try to use a xiaomi or huawei or any other chinese brand that doesn't share hardware w non-chinese brands like i have been doing for the last few years.
i had it on tmobile prepaid for a little bit over year or so and i had the account since 2009 w 2 other chinese phones in the past. i tried switching to at&t in january and it worked for the first day, but then i got a text from at&t saying that my phone is no longer compatible and i had no signal. the store told me that the imea number had to be whitelisted and that i had to put in a request at their website. the signal reception sucked anyways, so i tried switching back to my old t-mobile account by popping in the sim, but it didn't work either and the t-mobile store said that chinese phones aren't allowed on prepaid anymore for "public safety". (he literally used air quote fingers and rolled his eyes. lol)
google recommended mvno's to get around the ban, but they're just as unaware as most that this is a thing in the united states; their websites still show that my redmi is compatible but i've literally tried them all and none have worked.
chatgpt recommended getting around the ban by purchasing phones that share the same hardware like they do with oneplus, oppo, etc. and that was the approach i was going to take until i decided to get a fairphone and put eos on it instead.
yeah, anything out there that i could put out now, it's already on stalker websites for like five bucks (since there's a bunch of other Mes with the same name. Apparently I play hockey. I keep forgetting to follow "my" career tho i should look up Hockey Other Me sometime.
We need to switch over to open source phones. There is no reason we need to rely on these big companies that governments and Powerful interests all have their hooks into.
Samsung phone might be dangerous to your health and life, even in a case of being near oen. Even if you aren't conspiring to send aid to Gaza, since they can probably also track people around you. Andd they do kill based on metadata. US and Israel, both.
goes to show anything tech coming out of US, EU and its client states are not ever trustworthy.. I would go as far as to e.g. not buy a Bosch fridge, never mind the other reasons not to.
After everything that has happened in the past 2 years, that entire region should entirely boycott Samsung until they're clear all Israeli spyware is cleared out of phones. The Middle East is a fairly large Market and everything Samsung should be forbidden entry by leaders of those countries until this is fixed.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
I am once again recommending you read theory. This is becoming a big pattern with your posts, you have doomsday predictions that are framed in the views of "good vs evil" as though those are the driving mechanisms of the problems of today. I really think trying to get a solid understanding of the way capitalism works and its contradictions will help you make better sense of the world, which can be much more comforting than relying on conspiracy theories about crypto and predictions from John the Theologian centering the idea that currency will become invalid and we will all have to run into the hills and barter to survive (as your linked post states).
Such an economy would collapse without workers, you aren't going to be hunted, capitalism rests on wage labor and needs continuous labor and circulation to keep going. What's more likely is imperialism waning as profit rates trend lower and lower and the global south seeks independence, resulting in crisis, not some even stronger oppressive capialist force that can act with any kind of coherent plan. The capitalists aren't going to run automated megafactories and hunt former workers for sport, they need workers to consume to continue the process of circulation. When circulation becomes untenable because of overproduction of goods and not enough wages to buy said goods, the system crashes. It isn't going to get stronger, it will get more desparate and violent but weaker at the same time. Fascism is a cornered, hungry animal lashing out.
Even as the capitalist world gets increasingly fascist, the way you frame the ways it will act ignore that the primary purpose of fascism is to save capitalist relations, not just to do evil for evil's sake. The way we fight fascism is fundamentally centered around organizing, not fleeing cities and trying to rely on physical currency. The mechanisms of capitalism are understandable, and as such we can move on to understand the ways it will actually decay and run into crisis, and how we can move on to socialism.
It's time to read theory, comrades! As Lenin says, "Despair is typical of those who do not understand the causes of evil, see no way out, and are incapable of struggle." Reading theory helps us identify the core contradictions within modern society, analyze their trajectories, and gives us the tools to break free. Marxism-Leninism is broken into 3 major components, as noted by Lenin in his pamphlet The Three Sources and Three Component Parts of Marxism: | Audiobook
Dialectical and Historical Materialism
Critique of Capitalism along the lines of Marx's Law of Value
Advocacy for Revolutionary and Scientific Socialism
As such, I created the following list to take you from no knowledge whatsoever of Leftist theory, and leave you with a strong understanding of the critical fundamentals of Marxism-Leninism in an order that builds up as you read. Let's get started!
Section I: Getting Started
What the heck is Communism, anyways? For that matter, what is fascism?
Breaks down fascism and its mortal enemy, Communism, as well as their antagonistic relationship. Understanding what fascism is, where and when it rises, why it does so, and how to banish it forever is critical. Parenti also helps debunk common anti-Communist myths, from both the "left" and the right, in a quick-witted writing style. This is also an excellent time to watch the famous speech.
Section II: Historical and Dialectical Materialism
By far my favorite primer on Marxist philosophy. By understanding Dialectical and Historical Materialism first, you make it easier to understand the rest of Marxism-Leninism. Don't be intimidated!
Further reading on Dialectical and Historical Materialism, but crucially introduces the why of Scientific Socialism, explaining how Capitalism itself prepares the conditions for public ownership and planning by centralizing itself into monopolist syndicates. This is also where Engels talks about the failures of previous "Utopian" Socialists.
Section III: Political Economy
That's right, it's time for the Law of Value and a deep-dive into Imperialism. If we are to defeat Capitalism, we must learn it's mechanisms, tendencies, contradictions, and laws.
Best taken as a pair, these essays simplify the most important parts of the Law of Value. Marx is targetting those not trained in economics here, but you might want to keep a pen and some paper to follow along if you are a visual person.
Absolutely crucial and the most important work for understanding the modern era and its primary contradictions. Marxist-Leninists understand that Imperialism is the greatest contradiction in the modern era, which cascades downward into all manner of related contradictions. Knowing what dying Capitalism looks like, and how it behaves, means we can kill it.
Section IV: Revolutionary and Scientific Socialism
Can we defeat Capitalism at the ballot box? What about just defeating fascism? What about the role of the state?
If Marxists believed reforming Capitalist society was possible, we would be the first in line for it. Sadly, it isn't possible, which Luxemburg proves in this monumental writing.
Excellent refutation of revisionists and Social Democrats who think the State can be reformed, without needing to be replaced with one that is run by the workers, in their own interests.
Section V: Intersectionality and Solidarity
The revolution will not be fought by atomized individuals, but by an intersectional, international working class movement. Intersectionality is critical, because it allows different marginalized groups to work together in collective interest, unifying into a broad movement.
Critical reading on understanding misogyny, transphobia, enbyphobia, pluralphobia, and homophobia, as well as how to move beyond the base subject of "gender." Uses the foundations built up in the previous works to analyze gender theory from a Historical Materialist perspective.
De-colonialism is essential to Marxism. Without having a strong, de-colonial, internationalist stance, we have no path to victory nor a path to justice. Fanon analyzes Colonialism's dehumanizing effects, and lays out how to form a de-colonial movement, as well as its necessity.
Solidarity and intersectionality are the key to any social movement. When different social groups fight for liberation together along intersectional lines, the movements are emboldened and empowered ever-further.
Section VI: Putting it into Practice!
It's not enough to endlessly read, you must put theory to practice. That is how you can improve yourself and the movements you support. Touch grass!
Mao wrote simply and directly, targeting peasant soldiers during the Revolutionary War in China. This pair of essays equip the reader with the ability to apply the analytical tools of Dialectical Materialism to their every day practice, and better understand problems.
Congratulations, you completed your introductory reading course!
With your new understanding and knowledge of Marxism-Leninism, here is a mini What is to be Done? of your own to follow, and take with you as practical advice.
Get organized. Join a Leftist org, find solidarity with fellow comrades, and protect each other. The Dems will not save you, it is up to us to protect ourselves. The Party for Socialism and Liberation and Freedom Road Socialist Organization both organize year round, every year, because the battle for progress is a constant struggle, not a single election. See if there is a chapter near you, or start one! Or, see if there's an org you like more near you and join it.
Read theory. Don't think that you are done now! Just because you have the basics, doesn't mean you know more than you do. If you have not investigated a subject, don't speak on it! Don't speak nonsense, but listen!
Aggressively combat white supremacy, misogyny, queerphobia, and other attacks on marginalized communities. Cede no ground, let nobody be forgotten or left behind. There is strength in numbers, when one marginalized group is targeted, many more are sure to follow.
Be industrious, and self-sufficient. Take up gardening, home repair, tinkering. It is through practice that you elevate your problem-solving capabilities. Not only will you improve your skill at one subject, but your general problem-solving muscles get strengthened as well.
Learn self-defense. Get armed, if practical. Be ready to protect yourself and others. Liberals will not save us, we must save each other.
Be persistent. If you feel like a single water droplet against a mountain, think of canyons and valleys. Oh, how our efforts pile up! With consistency, every rock, boulder, even mountain, can be drilled through with nothing but steady and persistent water droplets.
"Everything under heaven is in utter chaos; the situation is excellent."
Freedom Road Socialist Organization (FRSO) is a national organization of revolutionaries fighting for socialism in the United States. Our home is in the working class.
Yes, the problem is that everything I've talked about could happen suddenly, for example, after wars. I don't know exactly when it will happen, but I have a bad feeling about the future, a very bad one. But I'm glad to hear your criticism; it helps much more than kind words. Thank you.
I want to stress that I'm not trying to be mean, I genuinely think you'll feel more comfortable by trying to get a better handle on how society functions. Much of what you talk about is more speculative fiction than an actual likely course of events. That doesn't mean the capitalist world isn't headed towards crisis, but the way in which it reaches said crisis is going to look a lot more like the Great Depression or Russian revolution than it would 1984 or the Hunger Games. This fundamentally changes how we prepare so that we can better alleviate the problems coming in the future. I mean this with all kindness, a better world is possible, and it takes educating, agitating, and organizing.
It's just that recently the risk of a third world war has appeared. I have many different theories, but I can't confirm every one of them.
Okay, we'll see what happens next, but it's best to be prepared for any horror, even a sharp rise in food prices. I've seen videos and read articles predicting an imminent catastrophe, and corporate greed tells me that this catastrophe is just around the corner.
A third world war is not that likely. The US Empire cannot win an outright war against China, either China would win or both would lose. What's more likely is the US Empire going the way of Rome, continual decay until eventual collapse. It does help to be prepared for anything, though, I agree.
... I’ve seen videos and read articles predicting an imminent catastrophe, and corporate greed tells me that this catastrophe is just around the corner.
my own doomerism had me believing this as well, but then learning about texts like the ones cowbee has shared w you has shown me that our situation was predicted a century+ ago and I found it reassuring.
The most wild part is that it was never just some fringe leftist prediction; even liberal & conservative scholars from a century ago also predicted it like Keynes, or Polanyi, or Roosevelt (yes the president). It turns out that almost a century ago americans and other westerners just stopped paying attention to all the warnings from all of the scholars that they used to listen to and now we're in this doom filled future because all the people who benefit from the status quo have successfully created an environment where the future is seen as either more status quo or nothing but abject horrors to scare us into drinking the kool-aide of inescapable climate change and perpetual oligarchy.
Once I developed a rudimentary media literacy because those texts; the mainstream media became transparent and it became clear that everyone, but the people of ruling class, are kept ignorant of reality because ignorant people are easier to manipulate into all the unnecessary asshattery that we've been doing for the last five generations.
You have good experience, and you're right about a lot of things. And yes, ignorant people are easy to manipulate, especially if they're poor and desperate enough.
We own nothing, nothing is ours Not even love so fierce* that burns like baby stars But this poverty is our greatest gift, The weightlessness of us as things begin to shift...
in other words: make them so worried about trying to keep a roof over their heads and food on the table that they're don't have the energy & time to think about why they have to do this when there are litterally billions of other people on this planet who don't have to worry about doing the same thing.
I can attest to this as well. These days I'm scared by the immediate possible horrors of American fascism but I'm actually hopeful for the future beyond that. I also think now I'm much better prepared for escaping the worst of the acute fascism than I was before.
the us empire is about to demonstrate to the world that my other country of citizenship is still a helpless vassal state despite the incredible progress at self determination they've made in the last few decades and my recent career change has proven that savings were a thing of the past despite earning the american average salary.
i wish canada were an option for me, but the best chance that canada would consider me for permanent residency status is if i went back to the old career field that was giving me anxiety, depression, and the perpetual need to disregard reminders that i was helping the ruling class further fuck over the entire world.
I think it's important to discern capital voices, reactionary voices (regardless of sincerity), and level -headed voices, regardless of whether they manage to get money or not, in what amounts, although sources should be scrutinized. No one is perfect, but we need to evaluate motivation.
I see Hunger Games metaphorically like all mythologies, poetry, court jesters, Shakespearean plays, etc. And like myself, reactionaries tend to take things literally, rather than get a handle on their passions and channel them in more creatively appropriate ways, when opportunity presents. Something about luck means preparation meeting opportunity. But part of preparation is knowledge and understanding. It's a long, hard, frustrating process for we who are conditioned into expectations of ease, comfort, and drive-thru results. There will be the five stages of grief accompanied by bitterness and many of our comrades will get stuck in the five stages, bitterness, and the way things were/could have been. I think those who are able to see and move beyond these things, accept there will be hardships and work through them to move beyond will be the ones shaping the future. The choice is yours. The choice is mine. The choice is our comrades. Choose ye this day whom you shall serve. A spirit of defeat serves the enemy, regardless of where our loyalty lies.
You've been such a reassuring, steady influence as I work through my issues. I'm ever grateful for it and proud to acknowledge it.
Thank you, that's extremely sweet of you to say, comrade! And very well-put. One thing interesting about the "prepper" community is that it often is filled with right-wingers convinced the world will collapse, rather than organizing for revolution. They see no way out, and this turns them inwards to try to save themselves and maybe their family and friends. Understanding the world is the first step needed to find the way out!
No thanks needed. It's a decades long process of seeking, for we who are conditioned from birth by the well-meaning who were also conditioned from birth, for centuries. But that protestant work ethic will become a useful tool, rather than a weapon of destruction, for those who join us.
Not by much, IMO. It is true that non-renewables are being used up, but AI isn't the answer, and certainly not suicide. The answer is organizing, and moving onto socialism so we can coherently and collectively plan society.
Here's Debt: The First 5000 Years by David Graeber, I believe this is what you're referencing. Capital isn't too difficult, IMO. It's long, but the first 3 chapters are the most complex, after that it's fairly smooth sailing, and Marx is actually a pretty witty writer. Just in case anyone was too scared by its reputation to read it!
This book explores the role debt has played in shaping human history, from ancient civilizations to modern societies, debunking the conventional economic narratives...
It's not that its hard, but Marx–while capable of very good and engaging writing–was trying to be a respectable 19th century intellectual for that one, so it's kind of a painfully dry slog. That was the style at the time.
I'd actually say that applies more to volume 2 than it does 1. 1 has lots of literary references, metaphors, and fiery writing, while volume 2 is far more straight and academic. Lenin on the other hand was always spicy with his writing, haha.
Can't agree with Lenin slander, he's one of the greatest heroes the working class has ever had and one of the greatest theoreticians of all time. That being said, at least we can agree that he was a hell of a writer!
I think even among ML's there are better candidates for all that. Castro's entire set, for one.
I think he absolutely meant it and was a gifted administrator(putting aside killing all the other communists for a moment), but he made the same mistake all the French revolutionaries made–centralized power too much taking it from the soviets, so it fell apart when anyone less capable of filling those extremely large shoes stepped in.
He made the classic 'great man' mistake, and didn't trust the people he meant to save, so his success began to die the moment he did. It's hard to blame him personally, but god dammit he could have done so much better with a little sacrifice in initial efficiency to help the people be a bigger part of the revolution.
Lenin was one of the earliest theorists, organizers, and eventually the leader of the first explicitly Marxist revolution in world history. Any one of these accomplishments would make him one of the most important and admirable Marxists ever, but all three?
Lenin's worst mistake was giving too much of his health to his nation. Sorry, but your reading is not supported by the historical data, even though it is so often repeated by the western left.
That's not really an accurate view of the Soviet Union. Lenin didn't take power away from the soviets, they were still the driving force of decision-making. Thanks to achieving a socialist system, life expectancies doubled, literacy rates tripled, healthcare and education were free and high quality, working hours lowered, vacation days increased, housing and employment were full or nearly full, and they went from feudalism to space in half a century.
Lenin didn't "kill all of the other communists." The vast majority sided with the bolsheviks, and others fought against them and lost in the civil war. It wasn't like Lenin pushed a "kill everyone who disagrees with me" button, there was an active civil war with people killing bolsheviks and the Red Army as well.
The Soviet Union also didn't really fall apart simply due to Khrushchev, Gorbachev, or Yeltsin alone. They contributed by undermining the socialist system and introducing parts of government meant to work against each other, but the soviet union still functioned well until it was illegally dissolved.
All in all, you have a very inaccurate view of Lenin and the Soviet Union, I'd say. It was the single most progressive force in the world throughout its existence, and figures that you list like Castro directly owe at least some of their success to Lenin and the Soviet Union.
Emotions are important and allowing them, feeling and working through are important. And so is not reacting from the emotional storm, or immediately after it's passed. Give the invisible charge in the air to pass, metaphorically.
What’s this “future” shit? That’s how it is now. We have healthcare tied to employment in the US, and if you post anything negative about Nazis you will lose your job.
I have been wondering this ... why don't people open "mattress testers" companies where they basically employ people for sleeping (wage is $0 but it's a "job"). Just to fulfill the work requirements.
I used to work at a gas station decades ago that charged $20 for the 1 gallon Jerrycans. It was really rough anytime I had to sell one, because the only people who need them are already desperate. Anytime I was working alone I would give them away.
We are thrilled to announce the soft launch of Fedora Forge, our new home for Fedora Project subprojects and Special Interest Groups (SIGs)! This marks a significant step forward in modernizing our development and collaboration tools, providing a pow…
Some clients show an excerpt (I ain't complaining about you putting it in a comment though) so probably to that guy it looked like you just copy/pasted this thing
On Thunder I have no excerpt and I find really annoying all those who post link without comments. They are just doing clickbait like any news aggregator. If I want that there is already google news for instance... So I value those who add a comment to their post and say why they post it and find it interesting. Isn't Lemmy all about sharing thought, so does poster except other to do it for him and just want to have popular posts?
i wish i understood why people use those apps to browse lemmy. i used to think that they were pointless, but watching them drive up the userbase numbers up for .world and .ee made it seem like i must be missing something so i tried all of the ones i could find and the experience was the same for me as it is with a browser.
Whoohoo! I wad just saying how cool it would be if big projects like Fedora, OpenSuse, the free desktop foundation, kde, gnome, etc moved to forgeo because of the impending federation support linking them all together
Hi, all. So I want to set up a media server using my Raspberry Pi. It will be used by me and my partner, who is very much tech illiterate. She knows how to use Plex, but I'm tempted by the open nature of Jellyfin. How steep is the learning curve there? Should I just go with Plex and keep it simple? Or is Jellyfin manageable if I set it up for her?
I haven't heard of any learning curve with Jellyfin. It seems easy to set up, and the apps are about as user friendly as you can get (especially the third party ones)
Speaking of third party apps, here's some recommendations:
Android: Findroid Works absolutely great, it's very rare that I even find a bug.
iOS: Swiftfin I don't use iOS but this is the one I installed on my friend's phones.
Linux (and maybe Windows): Delfin This is a GTK 4 app for Linux and maybe it has a Windows build too but I didn't check. It's not perfect, there's bugs here and there but it mostly works fine. The developer isn't very active (which is understandable), so it would be nice if someone, who has the time for it, would help out.
Here's also the official page with Jellyfin clients: jellyfin.org/downloads/clients… It doesn't seem to include Delfin though.
Finamp was pretty good, but offline mode and playback had some quirks/struggles for me. Maybe its cuz im on graphineOS. The true winner for me on my pixel8 is symphonium. Its a one time purchase, with a free mode... absolute knockout. Zero bugs, great, easy UI, smart playlists, scrobble integration for discovery, etc etc etcccc
On the other hand, jellyfin's identify feature works better than plex's did for me, and it lets you rename stuff very easily whereas Plex needed you to find the exact piece of media in a database.
My mom asked me to rip a set of weirdo bootleg tai chi DVDs years ago, back when I used Plex, but I couldn't figure out how to get them to show up in the library because, again, weirdo bootleg media and I have no idea where she got them. But I switched to jellyfin last year and on a whim decided to mess with them, and getting them to show up in my jellyfin library was basically automatic
Edit, another fun example of fucking with Plex's identify feature just came to mind. For some reason it kept deciding that random movies were actually some movie named "A Fish Called Wanda." I'd never heard of it before, the movies it would misidentify were entirely random as far as I could tell, and no amount of fuckery would get it to identify the movie correctly. It would decide that, say, The Matrix was actually AFCW, I'd remove the files for The Matrix, and it would decide something else was AFCW. Eventually I got fed up and downloaded an actual copy of AFCW, but it still refused to play the correct files if I navigated to AFCW in my library. Never did figure that one out.
The main difference between Plex and Jellyfin is the network setup. Plex takes care of that for you, while you have to set it up your self with Jellyfin. Another difference is that Plex can combine content from multiple servers ( I think. I'm not a plex user, so I don't know for sure), while it will always be seperate servers in jellyfin.
Jellyfin will always have my heart though, because it's open source and not here to make money. Plex also have a reputation to show ads and other stuff from streaming services.
The networking aspect is basically the only thing stopping me from switching from Plex to Jellyfin. I got Jellyfin running and accessing my server myself, while on my home network is easy. However, when it comes to accessing outside of my network, it gets complicated, and when it comes to other people accessing my server it gets more complicated, and then accessing my own server and friends' servers it gets even more complicated.
With Plex, all of that is super easy. I can watch stuff from my own server and my friends' servers on any device, including a web browser, and I can tell my mom, for example, "install Plex on your Roku and tell me what email address you use to log in" and boom, she has access to my library.
yes my world will burn when they crack into my jellyfin instance and magically break out of its docker container and then what? goo nowhere on its vlan?
literally thousands of self-hosted jellyfin/emby instances and the support forums are just chocked full of people getting hacked via it! so many!
If you don’t trust nginx or caddy or etc security, just install Tailscale to the jellyfin node and share the node with friends. All they need is Tailscale client then, and you dont have to open any ports.
No you haven't. The security is the Jellyfin login prompt, then Jellyfin itself, then the Jellyfin container, and if you're really paranoid, that container won't be in your LAN.
Dynamic DNS has been around forever. A program monitors your public IP address and updates the DNS record when it changes. You can even use a service like FreeDNS if you don't want to pay for a domain.
Free DNS hosting, lets you fully manage your own domain. Dynamic DNS and Static DNS services available. You may also create hosts off other domains that we host upon the domain owners consent, we have several domains to choose from!
Can you explain to my mom how to install tailscale on her Roku and that she has to turn it on each time she wants to use Jellyfin but then back off again when she wants to watch something on a different app?
As far as I understand, Tailscale (being a Wireguard network) doesn't need you to flip it off and on - if you're connecting to the relevant endpoint it gets routed through that, otherwise it just goes the normal way.
Not gonna pretend that means the setup is trivial to nomies, but you could probably set it up for them and not have to worry about it.
Yeah but it doesn't auto connect on a lot of devices. So if you restart the device you have to reconnect. Tech illiterate people struggle with this concept.
Have zero knowledge of Roku but for example with AppleTV boxes it is totally fire and forget, Tailscale is always on in the background and apps will find my media servers through it.
And I’ve noticed even tech illiterate people will learn to become literate when there is some motivation, like a huge movie archive 😀 Flipping a preference like VPN on if they want to use certain app is certainly within realm of possibility.
Why exactly would they ever need to turn VPN off again? It’s not like all their traffic will go through it if it’s on, unless you specifically configure stuff that way (exit node, routes).
And one option to do the VPN stuff is on their router too, so it’s totally transparent to them. More stuff to configure though, unless running owrt or some other router software compatible with Tailscale.
I have only recently started with self hosting and after some minor frustration, i am in love!!! Plex isnt just worse cuz its paywalling your own files, its install, support and ui are pretty trash, imo. The one advantage i saw was that it was easy to share w folks. If your jellyfin is going to be secure AND accessible, thats more work to do.
Keep in mind jellyfin does NOT recommend using a pi, bc it struggles w transcoding etc. That said, my first go was an rpi5. I used this guide and it was pretty brainless.... ezpz:
Beware, uptime w the pi is pretty bad... had to restart server all the time, and some devices would not stream properly. It did work, mostly though, and it was a great intro for me since i just had it lying around.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
IDK about the RPi5 but earlier models don't do well with transcoding. You'll want to make sure to convert all of your videos to a format widely compatible with your clients. H264 is usually compatible with any device of the last 10ish years.
Honestly I found plex a lot simpler to set up when I started out.
In Jellyfin I had to wrangle the settings a lot when trying to set up hardware encoding since my streams kept crashing due to some codecs not being dupported by my CPU.
Yeah, unless one happens to have one of the beefier Raspi 4 or Raspi 5 variants (which, of course, would be an overpriced choice if their sole purpose is to be a home server). To give specific recommendation for cost-effective beefier home server hardware: Used Thin Clients. For example, Dell T530 Wyse (or T520, or T540, or the 6x0 series).
Only issue I had with my thin client node is the ethernet port sucked, dropped packets semi-consistently got a 2.5gb ethernet usb adapter to replace it and things have been noticeably better
I ran it on a RPi4 years ago, but it didn’t perform well enough. It performs fine on an old laptop, but not so much in a Pi from my experience. Can’t speak to the RPi5, though.
I never needed transcoding. So jellyfin ran on my Raspi4 for a couple of years. Never faced any issues to be honest. Major issue was hard disk getting disconnected, but then again I had faulty SATA to USB connectors.
While jellyfin itself is very simple, you might run in to problems if you want to use it while not on your home network. For this you're either wanna use a VPN (or tailscale) or use something like nginx to give your server a web address, while you get this for free if you use plex.
Giving yourself a public address might be easier for the person trying to access jellyfin, but it it comes with a bunch of security considerations and you probably (definetly) want to do some research on the inns and outs of that. I would recommend tailscale but either way it's gonna be some extra fiddling, unless you already have something like that set up.
I remember an announcement that the feature enabling remote viewing (outside of network) has/will become a paid function on Plex. But I haven't followed it so don't know all details
You can always run both and see which you prefer. I use jellyfin for me because the devices I use have clients that work really well. Older TVs for family members weren't as simple and I couldn't be bothered to figure it out so they use Plex.
I use a smart tv that has it's internet access blocked by mac address. Simply sideloaded the jellyfin app and since tv and server are on the same network they can still communicate :3
I'm on an older Synology diskstation (418play) and I found Emby was better packaged to use on that platform. On a Pi I might have gone for Jellyfin instead.
I am experimenting with Jellyfish this month and really enjoying it.
I have a lifetime pass from Plex from a long time ago so it's my fallback now. And because of that I wasn't sure if I should try Emby since ... Well you have to pay. And I already have Plex.
But I'm curious ... Because it feels like everyone who uses Emby is very happy with it and swears by it. And generally they all feel like Jellyfin is generally inferior to it.
Seems like Emby is a better Jellyfin that you have to pay for if you want all those premier features (I would).
I haven't really used Plex a whole lot but I have found Jellyfin from a user perspective to be extremely easy to use. The quick connect codes are one of my favorite features.
neither, the raspberry pi doesn't have a gpu to deal with transcoding so it's gonna be frustrating when ur trynna watch or listen to anything (its gonna keep buffering). i highly recommend checking out your local auctions from big business or government that are giving away old mini computers and use that as a self-hosting measure instead (no more than 100$). raspberry pi is kind of a scam ngl since you can get much better hardware for cheaper, ur paying for a brand image
I play 4k and 1080p HD stuff all the time with 5.1 surround at home and when I travel. It also runs my pihole and I have a rudimentary raid 1 (def not real raid 1) running with the rsync command to mirror my media drive that backs my data up every day at midnight. It's a punchy little fucker.
I don't disagree that you're generally paying for the name but it my 4b w/ 8GB ram I got as a gift kicks ass. There are definitely better machines out there but the pi can handle lots of what I ask of it.
I have an old 2 something I'm thinking of using to host my cloud storage on, too. I don't mind if it's slower uploading.
incheresting im not really sure what was wrong with my pi4 w/ 8gb ram then since it kept buffering every 3 seconds for 1080p stuff on jellyfin and it was frustrating af! i saw many others dealing with the same thing online and after seeing jellyfin.org/docs/general/post… I thought it was a hardware problem but it could be something else or plex does things different im not sure. nevertheless im glad that happened to me since ive moved on to superior cheaper hardware and it made me careful of branded products when it comes to hardware in general. im glad that set up u have is working for you :3
The Jellyfin server can offload on the fly video transcoding by utilizing an integrated or discrete graphics card (GPU) suitable to accelerate this workloads very efficiently without straining your CPU.
I agree. Jellyfin is great. After dropping my beloved Pi and switching to a refurbished Dell Wyse 5070 with DietPi every headache is gone. Again: Use DIETPI!
Optimised | Simplified | For everyone - Backed by community, DietPi is a minimal OS image for SBCs - Raspberry Pi, Odroid, PINE64 etc. Install software optimised for you!
I really would like to switch but can't for one reason. It lacks a user friendly logon screen like literally every other similar system. I've tested jellyfin with my family. They liked it, but they all hated having to enter a username and password instead of just having a list of profiles to select, so they voted no. This seems like such a trivial thing to implement, and would improve accessibility for lots of people.
Plex is an enterprise solution, if you need your tech illiterate grandma to access the media it's easier to pay them. If it's just a local network or you're okay with going down a rabbit hole of setup, then Jellyfin does everything and does it better IMO (Plex requires you to be online to login before it shows you your local data, plus you're sharing information on what media files you have to Plex).
I personally have been using Jellyfin for years, and my only complain is that the LG app is slow and I get some videos that stuck for a few seconds in it (probably some codec thing, that I could fix by transcoding the media but I haven't been bothered enough to figure it out)
Only took two years for Corporate media to start reporting what these Zionist psychopaths say to each other in their language rather than rely on official propaganda.
I know... You can't make people be so violent, without manipulating them. And it's always the rich and powerful, who make the "workers" kill each other...
JERUSALEM—In response to an independent United Nations inquiry concluding that Israel is committing an ongoing genocide against Palestinians in Gaza, Prime Minister Benjamin Netanyahu issued a defiant statement Thursday in which he criticized the commission’s finding, declaring that “these so-called genocide experts have probably never committed a genocide in their lives.”
“Until you’ve killed countless civilians, the word ‘genocide’ shouldn’t even come out of your damn mouth,” said Netanyahu, arguing that the pampered intellectuals at the U.N. were nothing more than a bunch of armchair human rights abusers. “Name one ethnic group you’ve attempted to obliterate. I’ll wait.
I mean, have you even bombed a single children’s hospital? Please, you’ve got no idea what you’re talking about. Maybe you read a book about the 1948 Genocide Convention? Well, I’ve read Sports Illustrated, but that doesn’t mean I’m a quarterback.
JERUSALEM—In response to an independent United Nations inquiry concluding that Israel is committing an ongoing genocide against Palestinians in Gaza, Prime Minister Benjamin Netanyahu issued a defiant statement Thursday in which he criticized the com…
Former Deputy Chief of Space Operations for the US Space Force, General Michael Gattlein, announced that the deployment plan for the Golden Dome missile defense system has been completed.
The US Department of Defense is not disclosing details of the program or its cost. The Pentagon statement stated that a review is currently underway, so no further information is available.
A look at the general's changing tone makes it clear that the project is facing difficulties. In July, he claimed that he would present an "objective plan" and disclose the program concept after the 60-day deadline.
As for the cost, one can conclude that Trump's $175 billion plan was optimistic. According to the Congressional Budget Office, the development and deployment of the missile defense system will require $542 billion, and that's just the cost of creating the interceptor system. Defense Department spokesperson Kingsley Wilson stated that cost details should not be disclosed because the program is critical to national security.
Although the project has a relatively short development timeline, it already has its critics. They argue that the effectiveness of a missile defense system depends on a variety of factors, from its location on the planet to the types and number of threats the system must counter, as well as its expected reliability.
Computer modeling has shown that the guaranteed destruction of several warheads would require dozens of times more interceptor missiles. A simple calculation shows that the system could easily be overwhelmed by the launch of several missiles, not to mention a massive nuclear missile strike. Military analyst Todd Harrison of the American Enterprise Institute warns that even minor changes to the system's parameters could increase its cost by hundreds of billions of dollars.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
The UK will be at the leading edge of defence innovation as the government signs a new partnership with Palantir to unlock billions in investment and deliver on the Government’s Plan for Change.
Why is China financing power plants across Africa? This analysis breaks down China’s motivations — from resource security to export markets — and what’s at stake.
They just don't get it do they. China has literally stated they intend to transition away from US technology. I think they're fine with straining the totally previously healthy and definitely not one sided relationship with the US.
"I could never again raise my voice against the violence of the oppressed in the ghettos without having first spoken clearly to the greatest purveyor of violence in the world today: my own government.” -Martin Luther King
How would I add a new ranking algorithm to Lemmy as a contributor? I'm a developer by trade, but unfamiliar with Rust and the codebase of Lemmy specifically. It doesn't seem like Lemmy has a concept of 'ranking plugins', so whatever I do would have to involve an MR.
I'm pretty sure that with a few tweaks to Thiele's rules, I can compute a complete ranking of all comments in a thread in O(ClogC + E + VlogC), where C is the number of comments, E is the total number of likes, and V is the number of users. This would also support partial approvals, upvotes could decay with age.
I believe this would mitigate the tendency towards echo chambers that Lemmy inherits from Reddit. Lemmy effectively uses Block Approval Voting with decays to rank comments and posts, leading to the same people dominating every conversation.
Lemmy needs less algorithms rather than more. If they're accepting voting-related patches, maybe write one that turns off voting and just shows everythng chronologically. There is actually no way to do that right now. Sort by "new" orders the top level comments in a thread most recent first, but keeps the threading intact. There should be a setting that flattens out everything and sorts purely by timestamp.
Then the conversation would be dominated by whoever has the most time to make posts, which isn't what I'm going for. I'd rather have a method that satisfies Proportional Representation.
I don't think it would work for my specific algorithm, unfortunately. To compute PAV, I need access to the "raw votes" of each individual user.
PAV doesn't need to know the identity of the user behind each upvote, but it does need to be able to correlate which upvotes originated from the same user so that once a user is determined to be "satisfied" by having a comment they upvoted given a high rank, all of their other upvotes need to be deweighted for the remainder of the process to "make room" for other users' opinions.
I checked the Lemmy API docs, and while that information is available at /api/v4/post/like/list and /api/v4/comment/like/list, so I could have a frontend that scraped every comment and then every like of every comment in a community (ignoring how inefficient that would be), but both of those endpoints are tagged as "Admin-only".
Plus, even if I could do that, to compute the rankings my process does need the upvotes of every comment in a post (or every post in a community) before it knows which one is on top, which seems too much to put on a client.
so I could have a frontend that scraped every comment and then every like of every comment in a community
Or you could do the same thing that lemvotes.org/ does and follow the communities and actors to build this database on a separate server, which then can be used by the client(s).
What if the lack of comments were because comments weren't proportionally representative?
Someone sees a discussion that interests them, so they see what the top comments are. But if the Hive Mind(tm) has spoken (even if just by awarding the top two or three comments to the same viewpoint), will they engage, or will they go somewhere else?
Remove the Hive Mind, and maybe you'll get more engagement?
The ranking is implemented in a rather complicated way for performance reasons: - First there are SQL functions which calculate the rank for a specific post or comment (defined here) - These SQL functions are used by a scheduled task which updates post ranks at a regular interval (defined here) - Then there are the database tables which store the calculated rank (eg post.hot_rank) - Also the API parameters to specify the requested sort, and preferences for default sort options etc - These params are used in the post listing db query to sort posts by the given rank field (here)
This is exactly the info I'm looking for, thanks! I knew there'd have to be some kind of scheduled task to recompute the rankings (IIRC the lemmy docs say ~10 minutes for recomputing ranks), I just wasn't sure where it was.
The change that would require the least effort to implement my voting system (whether the lemmy maintainers would accept the change notwithstanding) would be to target the schedule task, and introduce a server-wide configuration option that would allow admins to pick whether they're using Block Approval (what we have now) or Proportional Approval (what I'm introducing) based algorithms for their server's "hot" algorithm. No API or frontent changes required. Then, work towards community mods being able to set that on a per-community basis.
Sounds interesting, though from your links it's not clear to me how exactly it works. Depending on that it could make more sense to implement as a separate sort option, then each user could try and compare it to the existing sorts.
I was thinking of it as a drop-in replacement for "hot" just so that it doesn't require any changes on the UI to implement. I'm a bit rusty with UI development, lol. The frontends wouldn't have to add a new button, and the Lemmy API wouldn't need to add a new sort type. That said, maybe that sort of thing is easy to do?
As far as it would work, Thiele's elimination rules is computed roughly as follows (I'm assuming that only upvotes are counted; I haven't considered yet if the process works if disapprovals count as a vote of "-1" or how the process could remain scalable if an abstention counts as a vote of "0.5":
begin with the list of posts, list of users, and list of votes
# initial weighting, takes O(E)
for each post:
for each vote on the post:
lookup the user that voted on the post
based on the number of votes the user has given, determine how much the user would be made "unhappy" if the current post was removed
# the basic idea here is that if the user didn't vote for a post, then they won't care if its removed
# if the user did vote for a post, but also voted for 100 others, then they probably won't care if one gets removed as long as 99 remain
# if the user did vote for a post, but only voted for 2 or 1 others, then they'll care more if this one gets removed
# if this is the only post the user voted for, then they'll care a lot if it gets removed
# LiquidFeedback uses a formula of "1/r", where r is the total number of votes the user has given
# as posts get removed, the votes get removed too, so surviving votes get more weight
# for the sake of efficiency, I'll probably use a formula like "if r > 20 then 0 else 1/r" so that users only start to contribute weight to posts once they only have 20 approvals left. Replace 20 with a constant of your choice
add the user's resistance to the post being removed to the post
# initial heap construction, takes O(C)
construct a min-heap of the posts based on the sum of the users' resistances to the post being removed
# iterative removal of posts
while posts remain in the heap: # O(C)
remove the first post in the heap - this has the least resistance to this post being marked 'last' in the current set # O(logC)
yield the removed post
for each vote for the removed post: # in total, O(E) - every vote is iterated once, across the entire lifetime of the heap
lookup the user that voted on the post
compute this user's resistance to this post being removed
remove this vote from the user
based on the number of remaining votes the user has given, compute the user's resistance to the next post being removed
compute how much the user's resistance to their next post being removed increased (let this be "resistance increase")
if "resistance increase" is nonzero (based on my formula, this will happen whenever they have less than 20 votes remaining, but not if they have more than 20 votes remaining):
for each vote for a different post by this user:
increase the post resistance to removal by "resistance increase"
perform an "increase_key" operation on the min-heap for this post # this will be O(logC)
# worst-case, each user will perform 20 + 19 + 18 + ... "increase_key" operations -
# they only begin once there are 20 votes remaining
# when they have 20 votes remaining, they have 20 increase_key's to do
# when they have 19 votes remaining, they have 19 increase_key's to do
# etc.
# because this is a constant, it doesn't contribute to the time complexity analysis.
# so each user performs at worst a constant number of O(logC) operations
# so the overall time complexity of the "increase_key" operations is O(VlogC)
For this algorithm, the yield the removed post statement will return the sorted posts in reverse order. So worst to best. You could also interpret that statement as "Give the post a rank in the final sorting of count(posts) - (i++)".
Thiele says that process can be used to elect a committee of size N by stopping your removal when N votes remain. But because it's a "house monotonic" process (electoral speak for "increasing the size of the committee by one and re-running an election is guaranteed not to cost any existing members their seat), I figure it could be repurposed to produce a ranking as well - the top one item is "best one", the top two items are the best two, the top three are the best three, etc.
To make the above process work for approvals that decay over time, we'd just treat a decayed approval as a partial approval. I still have some work to do on how exactly to integrate partial approvals into the "resistance to removing each post" calculations without ruining my time complexity. But basically it's a proportional score voting election instead of proportional approval.
Adding a new sort type is not a big deal, so dont worry about it. And a new admin setting for this would also require UI changes, so the new sort type is easier overall.
The current sort options calculate the rank for each post only from the data on that post (number of votes, creation time). Your suggested algorithm looks much more complicated than that, as it requires two iterations and needs to access data from multiple posts at once. Im not sure if this can really be implemented in a way thats performant enough for production use. Anyway feel free to open a pull request, then hopefully other contributors can help you to get it working.
I am looking to start an online store for some art projects/crafts/stickers mostly as a creative outlet for some of my current frustrations.
Since some kinds of people take art way too personally, I want to take precautions from doxxing or being harassed.
What are some best practices for an online shop? Are there any recommended storefronts or something like that? I’m sure there’s a lot of things I’m not even considering.
Sell it for Monero on XMRBazaar.com. You can just list your item and don't have to give any kind of personal information to create the listing or receive payment for the product.
I recommend that you think hard and properly access your threat profile. You are likely going to have to pay with either your wallet (eg: some sort of company incorporation, lawyer fees, forwarding services, and other privacy protection services), your time (eg: using "inconvenient" services, managing separate accounts, etc.), or both. It can be draining (in more than one way) and take away some of the joy that you're intending this to bring you if you do too much to protect yourself. On the other hand, if you do too little then you can overexpose yourself leading to pricey or dangerous situations.
At a minimum, I would recommend incorpating and making sure your name is not publicly tied to the company in any way. You will likely need a person/company/lawyer to be publicly listed as an agent of some sort for the company. You should be able to have someone do this for you for a small-medium sized fee. Once you have that, do everything in the company's name and ideally with separate phone numbers, email addresses, online accounts, bank accounts, and physical addresses as anything tied directly to you.
Some of that is to protect yourself financially and legally, but there are some obvious privacy benefits as well. Anything beyond that should be dictated by your threat profile.
As always though, follow best practices when it comes to security! Use strong passwords and use multi-factor authentication when possible (or ideally, use passkeys). Don't reuse passwords (and ideally, don't reuse email addresses for multiple accounts). Avoid clicking links in messages when possible. Don't open suspicious documents (especially if they are unexpected). Verify the authenticity of any new person/business you interact with (especially if they contact you first). Be vigilant of all forms of phishing attacks.
Another piece of advice (that you didn't ask for, sorry!) - if the process of making art is the thing that brings you joy and the materials are not too expenses, then just focus on making the art without selling it (at least for a while). At worst, you will realize that maybe this isn't as enjoyable as you thought it would be with the added benefit of not needing to deal with all the troubles of working through all the legal/financial/privacy protections. At best, if you decide to get serious about selling it then you'll have a larger product inventory and better understanding of what you like making most. It may also help you understand what you should price everything at (assuming you've made some of the items in larger quantities).
Get a P.O. Box for returns/exchanges, so you don't have to give out your home address.
Use a VoIP service if you need a business phone #. Callcentric is cheap and reliable.
Use an email redirect service like SimpleLogin or AnonAddy to create an email account that's just for business, and add it to your PayPal (if you have one & plan on using it) so people don't see your personal email address on receipts.
If your volume is low probably some managed service that handles payments and searchability for you. Like etsy, but I'm not sure if etsy is actually good (anymore?)
Whatever you do don't get a domain name (website) and register it with your name and other info they want like email, phone nunber and address. Anyone could whois you and find out all that information in literally 1 second by just typing in your website and it's usually public data unless you request and pay extra for them to hide your info
A former CIA official and contractor, who at the time of his employment dug through classified systems for information he then sold to a U.S. lobbying firm and foreign clients, used access to those CIA systems as “his own personal Google,” according to a court record reviewed by 404 Media and Court Watch.
💡 Do you know anything else about this case? I would love to hear from you. Using a non-work device, you can message me securely on Signal at joseph.404 or send me an email at joseph@404media.co.
Dale Britt Bendler, 68, was a long running CIA officer before retiring in 2014 with a full pension. He rejoined the agency as a contractor and sold a wealth of classified information, according to the government’s sentencing memorandum filed on Wednesday. His clients included a U.S. lobbying firm working for a foreigner being investigated for embezzlement and another foreign national trying to secure a U.S. visa, according to the court record.
This post is for subscribers only
Become a member to get access to all content Subscribe now
Dale Britt Bendler “earned approximately $360,000 in private client fees while also working as a full-time CIA contractor with daily access to highly classified material that he searched like it was his own personal Google,” according to a court re…
I'm pretty sure he's far from the only one. Databases with such a vast amount of "forbidden" knowledge will always be misused.
That's why we shouldn't have global surveillance, espionage and "highly classified material" wherever it's possible for agencies to do their jobs without them.
And I'd argue most of the data the contractor had access to was neither relevant for his own work, nor for the work of all of the CIA.
We’ve known since Snowden that these people browse private info for fun, and exchange anything spicy they find with each other. But this guy was straight up selling classified info to anyone who would buy it.
I’m shocked they’re letting this guy off with a plea deal. This was so far beyond misuse of systems. This was full on treason.
Depends which kind of partisan you’re talking to. One kind believes it’s ok to keep them in boxes in a bathroom. The other kind thinks ok to keep them in the trunk of a car or a private server.
Reasonable people want both kinds held accountable.
First of all, lol. Second, nobody gets banned for disagreeing and these posts always get downvoted to begin with! You're safe, this is a Western safe space.
Yes remind me which invades/threatens to invade neighboring countries, EU, Russia and/or China? Which of them is flying aircraft into the others' sovereign airspace? Which of them is actively committing genocide?
Libs explaining how the hundreds of pictures of proudly worn Nazi iconography, hours of nazi propaganda, and multiple statues and national holidays dedicated to Nazi collaborators are just a RuZZian invention
Oh, gee. I wonder why theres so much Nazi shit around Germany. Where the Nazis are from. You keep.moving goalposts. At first it was enough to just have it. Now there is a threshold.
Did I say it was enough just to have it, or is that the only argument you had a canned response for? Because you can scroll back up to where I say how overwhelming the Nazism y'all deny is in Ukraine (and several NATO countries), you keep providing ample proof (and ample apologism) yet act like that somehow supports your parallel argument.
Also, lmao at the implication of Nazism being ok bc it's part of the cultural heritage with that Germany comment.
I didnt say it was okay. But what happens if you erase all that and nobody can see the history anymore? You make it easier for the Nazis to come back. Just look at the US. Nazis are everywhere. Pieces of shit are everywhere. And every world power is imperialist scum. Dont listen to governments. Dont Stan for nations. Support people instead. With your logic any place that had ancient castles is supporting monarchies.
Do you think the US being full of Nazis is some sort of gotcha? I wish the US was violently denazified, that's the fucking source of international Nazism.
I think more countries than you realize have this problem. The US in particular never solved its Nazi problem. They just got mad that Japan bombed them and left it at that. I think the world has a fascist problem because once one country is fascist it is everyone's problem. I also believe it will take a global effort to remove Nazism and its predecessor Capitalism from the globe. I hope one day it happens.
“The most famous of them was Adolf Heusinger, chief of the Operationsabteilung from 1940-1944. He was actually Hitler’s chief of staff and helped plan the Nazi’s invasions of Poland, Norway, …
End of September, Switzerland will vote for E-ID. A big threat for our privacy as it will widely used for tons of new use cases.
Behind the government pitch of an "open source project, completely optional" hides big tech industry... Which will make it mandatory to access their services.
Contrary to the last time this was proposed, the government is in control of it instead of private corporations.
This will also be an alternative to any of the current online ID verification, which involve sending photos of your ID, videos of it and videos of yourself to some random third party for verification.
My point of views is it will be used more broadly, in every services. So, even if it will be "optional",there will be no option to choose not to use it.
There is an article in the proposed law that e-ID is only allowed to be required for actions, where the law explicitly requires authentication.
In this proposed law there is no article that explicitly forces services to require a ID
So it only applies to services that used to require identification since a long time, lime buying alcohol, money laundering protection, some government stuff you had to do physically prior etc.
But there is a new law coming which sadly did mot get a referendum, that requires age verification for 18+ media like video and games. But this law will take effect no matter if e-ID is accepted or not. So if e-ID was declined, you would have to scan the compete ID, do a liveness selfie and send it to private companies like Netflix to watch 18+ stuff there.
With e-ID, you can proof you’re old enough without revealing name, gender, body hight etc.
Please inform yourself correctly before spreading nonsense
As you mentioned. There's a new law coming without referendum. Today you'll need it to guy alcohol. Tomorrow streaming After tomorrow access to public transport
The open web forum in my picture exists. You can have a look. They dictate the rules. Its public information 😀
It's not real democracy as the government motivate people to vote yes or no, and the government is completely corrupted. But yeah, it looks close to a democracy
Switzerland is the only country that I know has direct democracy. The others have indirect democracies where you vote politicians (or parties here in Slovakia) and they decide on your behalf what they want.
Mit der Initiative "Für eine volksorientierte Politik – NO-Lobbying" wollen wir dafür sorgen, dass unsere National- und Ständeräte für die Anliegen des Schweizer Volks einstehen und nicht willfährige, bezahlte Helfer sind, welche die Interessen von m…
You are not required to vote. You will not be punished if you abstain from your vote. You are completely free to chose "yes" or "no" based on your own judgings.
Maybe not all the system is corrupted, but when I found that Switzerland just follow the rules defined by the open wallet forum in this case. I've doubts
Mit der Initiative "Für eine volksorientierte Politik – NO-Lobbying" wollen wir dafür sorgen, dass unsere National- und Ständeräte für die Anliegen des Schweizer Volks einstehen und nicht willfährige, bezahlte Helfer sind, welche die Interessen von m…
There are two basic scenarios: 1. The legislative authority is drafting a new law. This law can be challenged and will then be voted on (this is the case for the E-ID law) 2. A suggestion for a new law can be raised by citizens. This law will then be voted on.
Who is "the government" in Switzerland exactly? I see people in favour and against it in "the government" of Switzerland. Or is "the government" just the politicians that disagree with you?
Any privacy freak who did a review on ItsMe? I just shared minutes ago lemmy.ml/post/36346569/2117413… that I don't trust them but maybe I'm just paranoid. The fact that they are regulated means little, Meta and Google also are and they legally siphon everything we let them.
We have a local privacy podcast (Dasprivé). The CISO was featured on the podcast. I can't transcribe everything but the community consents on the fact that they run a tight ship. The use case is very local so apart from Flemish and French speaking sources i sadly can't get further than 'trust me bro' at the moment.
Every authentication uses your SIM, your civil service number and your password (PIN, fingerprint, face id). Before authenticating you'll see all the info that'll be shared like your, date of birth, adress, phone number,...
Acces is granular. If age verification is needed, the request will only state that you're 18 or above for example. They don't get my date of birth. As a resident, I get a reduction at our local swimming pool. The can use my id but the only info they see is whether I live in the city or whether I'm from outside.
Everytime my data is accessed, the acces is logged. The log contains information about the organisation and, if it applies, the person that made the manual lookup. The legality is checked by logging the legal ground for acces.
Are they trustworthy? I don't know. We use our eID for online verification for over 20 years now and ItsMe has certainly made the whole process a breeze.
It's good to point out that the system was developed by a consortium of banks to simplify identity verification en prevent fraud. Banks are held to ''Know Your Customer''. KYC entails that they need to check your identity every now and then and up until ItsMe that meant that you had to verify with your eID and a card reader. Those card readers have issues. Outdated firmware and whatnot make the proces a terible experience. I have several government websites that I use from day to day and the all need my eID for authentication.
Some figures. Nearly 1.700.000 authentications every day for 11.700.000 Belgians. 80% Of the Belgians use the app.
To clarify, I know it works. I used it years ago (2022 I guess) and found it extremely convenient then. I did even help others set it up because I found it so efficient. So that's or popularity is not into question. How secure it is also isn't what I'm questioning because honestly if my bank suggests to use it, and it's not secure, they will have to pay in the end. No, the question is solely WHO gets WHICH data. For example is the bank consortium that can see my purchase? Is it "anonymized" (whatever that might in practice means) then sold to 3rd party?
Ah, you can see clearly who gets which data with every authentication. It's logged and I can look it up on my portal.
Actually'', apart from ItsMe, I can see every time someone did any lookup on my online data with the federal government for the last 10 years. I even get to see their names.
There's no third party watching with ItsMe because the traffic is encrypted. The data is owned by the Federal government and the party that requests authentication gets to see what the are legally allowed to see and what you clear. With every authentication you get to see what info they request.
So who gets to see then beside I guess your bank and the merchant site? You don't have to share anything specific, can be company names but if that would reveal some of your personal preference you can share type of economical actors (e.g. other shops, advertisers, insurances, etc).
It's used for official authentication. The certificates are handled by the federal government. That's only possible with a call to the federal governments servers.
Any eID or other card wil have outdated data on it at some point. Like, when you move or, when you die.
You can not just say that it is a threat to privacy. Its design improves privacy as we finally can ID ourselves, where it has always been required, without actually giving our identity to online services.
I known, but its still up to the provider. And to prove its unnecessary will takes so much efforts. There's too much lack in this law from my point of view. Instead, to prove our age for example, we could get TOKENS with age verification that are completely anonymous.
I mean that is exactly how it works. And if a private company wants to verify your age while violating the law they can do that already, just don't use their service then.
In Belgium we do have e-ID and we had it for years.
If in any of the circles there is only BigTech then indeed you are right it is a threat.
In Belgium though I can access my official document with some of these (honestly I don't remember which, but AFAIR It'sMe is one option) but more importantly there are some options with some decoupling, e.g. SMS (arguable as one must have a phone number usually via BigTelco) but, last and not least :
a card reader with your physical ID card and its chip with eid.belgium.be/en/what-eid which has had Linux packages for years
just learned about it yesterday which is why I'm excited to clarify this, a 2-step authentification app which does NOT have to be from BigTech, e.g. Ente Auth ente.io/auth/ which is FOSS and available on F-Droid
which means as long as at least one of these alternative is available then IMHO we can get some of the benefits without the centralization risk.
If I'm not mistaken, it's up to the the service that's using the Belgian e-id to enable some of the options or not. For example, the website where I check my payroll only works through itsme or with a card reader — no TOTP or SMS 2FA. It's a big issue because itsme refuses to run when you don't pass Google's safety net.
I'm talking about public services. For private services I have no idea what they all do and, as importantly, what they are legally bound to do. I would hope that obviously they would have to provide at least 1 solution that doesn't rely on any third party, e.g at least provide the card reader with legal Belgian ID option (which seems to be what they offer you, so IMHO that's good enough), but I don't know.
ItsMe not running is pretty good in terms of privacy because their entire business model is, and correct me if I am wrong, to be an intermediary. I didn't check what data they share but I'd be pleasantly shocked if it was none.
The card reader might seem slightly inconvenient or outdated but there is no intermediary and it is, AFAICT, secure because it's based on well established cryptography.
PS: it's also fun because you can play with PAM and thus, I didn't try that, login or get su and sudo with your ID card.
It doesn't matter whether it's a private or public service if they both use the same auth provider (beId). I wouldn't be surprised if the SMS/TOTP options went away completely at some point for our "security".
A different issue is that itsme is often the only option when doing things on mobile. Sure, you can avoid it for now, but it's getting increasingly inconvenient to do so, unfortunately. I try to express my disappointment to itsme every now and then about the fact that they require Google's SafetyNet and that the Connective Plugin needed to activate itsme in the first place doesn't even work on Linux, but to no avail. They sent me a detailed email about setting up a Windows VM to get it working so credit where it's due for the effort, but the situation is still bad...
That's what I was saying — sometimes the TOTP option is not available at all for certain services. Ente, Aegis, Bitwarden, etc won't save you there and itsme remains the only option on mobile when that's the case.
That's actually a choice made by the service. The onboarding document has the options listed and they get to choose, which is imho stupid. Just offer all options.
Service A has email enabled, service B doesn't. Since ACM/IDM is SSO you can first authenticate with service A with your email code and then go to service B already authenticated.
Those aren't eID. They are a way to authenticate using CSAM.
There are different weights tied an authentication method, card reader scores highest.
From the top of my head there's email, sms, totp, card reader, eiDAS and itsme® (which I avoid because it's proprietary and controlled by a 3rd party).
There's a list of properties a service can request when accessing data via ACM/IDM, for example your ssn, name, etc.
You can read your eID with local software too, with the aptly named eid viewer. Click on the picture in the overview and drag it into a text editor to see the entire exportable xml.
I will vote in favour if: - The E-ID platform is controlled by the government and is fully open source - Platforms only get a single binary information for age verification if the person is old enough or not and does not get any identifiable information. - The government platform does not get any info about what service is doing the request. So the government controlled ID platform cant log what service the person uses.
If any of these points are not fulfilled with the planned implementation I will have to weigh the risks.
github.com/swiyu-admin-ch contains far more than just the client. Only a certain component where they had to rely on a proprietary solution is closed source. Everything else is in the open.
private ids where always the scope of the privacy movement. However, it may as such present other challenges which can include age based discrimination. It as such must be implemented wisely.
Age is already being weaponised against us (child protection, etc), this shouldn't be like that - We can already see what kind of power governments hold. Ageism is what will ultimately destroy us.
oh wow these are for sure essentially the same level of Nazi apologia
dan69
in reply to gitgud • • •