Salta al contenuto principale



#Palestine | La LDH et ses partenaires appellent la France à prendre des engagements concrets contre le plan d’occupation de la bande de #Gaza annoncé par le gouvernement israélien.
lemonde.fr/international/artic…




Nel 1981 fallisce il tentativo clericale di smantellare la legge sull'#aborto con un referendum abrogativo, con 68% no e 32% sì. Ma anche oggi bisogna vigilare contro i tentativi degli integralisti di sfruttare alcuni punti della legge 194 per minare l'autodeterminazione.

reshared this



🔸Električka pod Ostrvou 🏔️🇸🇰

🔸Tram under Ostrva 🏔️🇸🇰

📸 Peter Rychlovsky

#hightatras #travel #photography



I was using processing originally to analyze music, but in the middle of the way it got a little bit designly interesting


This is a wiggler, an interesting machine tool locating device that is very accurate even though it's made of junk. Mine is a (roughly) sharpened (bent) bicycle spoke shoved through a bit of rubber band that holds it loosely in a 3d printed bracket that fits on the back of a boring bar. The sharp tip goes in a sharp punched dot on the workpiece and by looking at the far end as you rotate the chuck, you can see and adjust out position error to center the dot for boring.
in reply to plays with snakes

It's interesting to me because although you can't get quantitative info out of it, you can get _excellent_ qualitative data. If the fulcrum where the spoke hits the rubber band is 10x closer to the tip, the indicator end has 10x the wiggle of the error. It lets you center much better than most people (including me) can accurately locate the punch when making the dot. I mark it and locate the punch tip under a microscope and still have probably 0.05mm error. The wiggler has much less.
in reply to plays with snakes

The project was tubing blocks. These are like a collet holder but for bike tubing. I can clamp it and then miter both ends using the blocks to maintain alignment when I swap tubing ends in the mill vise. I can also clamp the block at an angle for cutting intersectional miters. Paragon sells these for $30 and uh that's actually a pretty good price, having made one.




Liberation of Alexandropol to increase pressure on Ukrainian army in DPR tass.com/defense/1959579




Made a Turkish loaf, to have with dinner since I made some Red Harissa paste last night.

#breadPosting #bread #pide

reshared this



Good morning. It's 7AM, Sunday, 18th May. The headlines: A Mexican naval vessel struck New York's Brooklyn Bridge. #Hamas proposes a prisoner swap after #Israel's strikes, amid ongoing truce discussions. In Palm Springs, an explosion at a fertility clinic, labelled as terrorism by the FBI, resulted in one fatality. Pope Leo XIV has been installed. The US military is enforcing a ban on transgender soldiers. #Austria secured triumph in #Eurovision 2025. #BBC #News


Saw this idea, to carve little stamps from pink erasers, and promptly became completely enamored. This is so much fun! #handmade #Art #LinoCut
Questa voce è stata modificata (5 mesi fa)


corriere.it/salute/ehealth/25_…

orrendo articolo di pessima informazione del corriere che promuove l'idea di usare chatgpt per consulti medici. non solo non dice chiaramente che questi oggetti sbagliano costantemente e quindi può essere pericoloso ma anzi ne esalta supposte qualità

alla faccia della responsabilità editoriale

Unknown parent

mastodon - Collegamento all'originale
quinta - Stefano Quintarelli
@andre123 @aladar è che stiamo invecchiando e quindi siamo piu' malati ... (e non ci sono abbastanza giovani)



Hab mich gerade mit der Schwalbe unterhalten. Sie meinte, dass es bei so viel Wind schwierig ist, genug Insekten für den Nachwuchs zu fangen.
in reply to Peter Jakobs ⛵

Das Bild zeigt einen Vogel, der auf einer Metallrasternarbe eines Bootes sitzt. Der Vogel ist schwarz mit einem gelben Bauch und einem roten Fleck auf dem Kopf. Er hat lange, schmale Flügel und einen langen Schwanz. Im Hintergrund sind Teile eines Bootes zu sehen, einschließlich einer weißen Wand und Metallrastern. Ein blaues Tuch und ein Seil sind ebenfalls sichtbar. Die Umgebung deutet auf einen Hafen oder eine maritime Umgebung hin.

Bereitgestellt von @altbot, privat und lokal generiert mit Ovis2-8B

🌱 Energieverbrauch: 0.163 Wh



One of the locking levers for the convertible top vanished between last week and today. The good news is that even though this is a 50 year old car I can get a new one for $13. The bad news is it takes a week to ship. I thought about milling one from brass but #freecad is a pretty quick way to model something good enough. I told prusaslicer to use 5 layers for wall thickness in hopes it would be strong enough to last until the new one arrives.
in reply to plays with snakes

I thought of this when I watched this video... ☺

youtube.com/watch?v=EGOrqx5Hxp…



This guy pulled up beside me at a stoplight, complimented me on my car, I said his looked great, and then he took off at about 10x the speed of anyone else in the area. (The road goes 2->3 lanes so he had space.)
#weirdcarmastodon


*It doesn't matter at all how cool your clothes are; if you just stepped off a plane or ferry, every local Ibizan, from age 8 to 80, will think that you are tourist livestock

youtu.be/dkFMS_yZWEQ?si=70298A…



pourovers!

(poursover?) and one something else.

after this I have some commissions to work on!

Questa voce è stata modificata (5 mesi fa)



Growing as an individual is key (by u/[Deleted user])
(AI Alt-Text)



Ultimi due giorno di Salone del Libro 💜
Vieni a trovarci al Pad.1 Stand C14
Collane Natura, Saggi, Bambini e Ragazzi, Manualistica e Narrativa
Ti aspettiamo!



Esiste un'aura di biofotoni emessa da tutte le creature viventi che scompare con la morte
https://www.wired.it/article/aura-biofotoni-creature-viventi-scompare-morte/?utm_source=flipboard&utm_medium=activitypub

Pubblicato su Scienza @scienza-WiredItalia



“Another glitch video was posted by Leo Humphries, who donned a suit and tie for an interview for a job as a news reporter. But Humphries can be seen furrowing his brow as he realizes his interviewer ‘sounds robotic’ and is not the actual hiring manager he had thought he would be speaking with.

‘I’m so excited to talk to you and get to know more about you,’ the bot says, before immediately falling into a loop of gibberish. ‘For our first question, let’s circle back. Tell me about a time when—when—when—when—let’s. Let’s—let’s circle back. Tell me about a time when—when—when—when—let’s.’”

slate.com/life/2025/05/jobs-ai…





Making digital a social issue

Delegated to experts, digital technologies produce toxic power relations, and becomes a source of alienation. It's time to subordinate it to our decisions.

The #JdLL allow us to have these deliberations, and we are very grateful to them.
:neopossum_sign_thx:

#YunoHost supports the event: jdll.org/soutenir

If you can, please help us make ends meet: yunohost.org/donate.en.html
:neopossum_heart:

#YNH

Questa voce è stata modificata (5 mesi fa)

I ❤️ FEDIVERSE reshared this.



*Everybody who knows I hang out in Ibiza thinks I should be dressing like this

*It's "the season" now, so I dunno, maybe I should





Spesso ci chiedono:
“Meglio un'istanza enorme come mastodon.social, una italiana come mastodon.uno, oppure una monoutente?”

Dipende
📌 Se scrivi solo in inglese, mastodon.social è una buona partenza: grande, affidabile, ben moderata e gestita da una no-profit.
💻 Se discuti solo di certi temi, esistono istanze tematiche molto coinvolgenti.

🇮🇹 Se scrivi in italiano di un po’ di tutto, istanze come M1 (mastodon.uno) sono ottimali: attive, con comunità vivace e interessi molto vari. (1/2)

Questa voce è stata modificata (5 mesi fa)
Unknown parent

Unknown parent

mastodon - Collegamento all'originale
mastodon uno admin
@Lucatermite l’isola deserta è come avere una tua email personale devi saperla gestire o ti esplode in mano, smette di funzionare e rischi di perder tutto. come già successo a molti. Un’istanza mastton è una impresa non facile
Quindi è una soluzione per smanettoni che vogliono massimizzare la privacy.
Se si scrive in più lingue a causa dell’assenza di algoritmi che filtrano la timeline servirebbe avere 2 account e curare i follower italiani e Internazionali separatamente.


Baby Khaled Al-Zainati, was martyred along with his entire family in Khan Younis - #Gaza #Palestine by the monsters in this world who have a state called #israel

A life barely begun, stolen too soon.




Huge crowd marches to remember 1948 ‘#Nakba’ expelling 800,000 Palestinians – and against Israel’s starvation blockade and renewed ground invasion of #Gaza

skwawkbox.org/2025/05/17/video…

𝗖 𝗔 𝗧 reshared this.