@la508 i found an image of a different version of the same product i think, it seems like this one has some red components that look like film capacitors in place of that blown smd thing
I think it's some type of MLCC. If you look up variations of this inverter board, some have two MLCCs in the same location labeled C7 and C8. I know that some MLCCs can fail catastrophically if they crack and short circuit, may be what happened to yours.
If it's part of an LC circuit the capacity and ESR will be important to match, but if it's only a filter capacitor, you can typically drop in a high value cap to replace it without worrying too much about matching the values. Of course you'll want it to be rated for the voltage and temp.
chickenf622
in reply to la508 • • •einfach_orangensaft
in reply to chickenf622 • • •Left as Center
in reply to chickenf622 • • •Seems to be
elecok.com/data_sheet/110830/c…
Delta_V
in reply to la508 • • •over_clox
in reply to la508 • • •I think this is some sort of surface mount fuse.
Don't quote me on that as fact though.
like this
TVA likes this.
m0darn
in reply to la508 • • •Paragone
in reply to la508 • • •See the thick traces?
It's part of the power-section, which helps narrow-it-down, some..
PCU-P057B board: duckduckgo.com/?t=fpas&q=%22PC…
like this
TVA e deliriousdreams like this.
Giovanni Petri
in reply to la508 • •@la508
i found an image of a different version of the same product i think,
it seems like this one has some red components that look like film capacitors in place of that blown smd thing
power-systems.de/fileadmin/Med…
Ask Electronics reshared this.
einfach_orangensaft
in reply to la508 • • •sadly the part dosent seam to have a name on it even before it blew up:
but its connected to pin1 and pin3 of the IC so maybe the datasheet can help you
meditronik.com.pl/doc/plusik/c…
Edit:
Found a similar PCB with 2x that component
makes me think its probably a capacitor
edit edit:
found another related board where the element at least hast text on it
"M104 3M62" not sure what that is tho
Evoliddaw
in reply to la508 • • •SlightlyNormal
in reply to la508 • • •I think it's some type of MLCC. If you look up variations of this inverter board, some have two MLCCs in the same location labeled C7 and C8. I know that some MLCCs can fail catastrophically if they crack and short circuit, may be what happened to yours.
If it's part of an LC circuit the capacity and ESR will be important to match, but if it's only a filter capacitor, you can typically drop in a high value cap to replace it without worrying too much about matching the values. Of course you'll want it to be rated for the voltage and temp.