“The Wikimedia Foundation has been exploring ways to make Wikipedia and other Wikimedia projects more accessible to readers globally,” a Wikimedia Foundation spokesperson told me in an email. “This two-week, opt-in experiment was focused on making complex Wikipedia articles more accessible to people with different reading levels. For the purposes of this experiment, the summaries were generated by an open-weight Aya model by Cohere. It was meant to gauge interest in a feature like this, and to help us think about the right kind of community moderation systems to ensure humans remain central to deciding what information is shown on Wikipedia.”
Some very out of touch people in the Wikimedia Foundation. Fortunately the editors (people who actually write the articles) have the sense to oppose this move in mass.
Wikipedia Pauses AI-Generated Summaries After Editor Backlash
The Wikimedia Foundation, the nonprofit organization which hosts and develops Wikipedia, has paused an experiment that showed users AI-generated summaries at the top of articles after an overwhelmingly negative reaction from the Wikipedia editors community.
“Just because Google has rolled out its AI summaries doesn't mean we need to one-up them, I sincerely beg you not to test this, on mobile or anywhere else,” one editor said in response to Wikimedia Foundation’s announcement that it will launch a two-week trial of the summaries on the mobile version of Wikipedia. “This would do immediate and irreversible harm to our readers and to our reputation as a decently trustworthy and serious source. Wikipedia has in some ways become a byword for sober boringness, which is excellent. Let's not insult our readers' intelligence and join the stampede to roll out flashy AI summaries. Which is what these are, although here the word ‘machine-generated’ is used instead.”
Two other editors simply commented, “Yuck.”
For years, Wikipedia has been one of the most valuable repositories of information in the world, and a laudable model for community-based, democratic internet platform governance. Its importance has only grown in the last couple of years during the generative AI boom as it’s one of the only internet platforms that has not been significantly degraded by the flood of AI-generated slop and misinformation. As opposed to Google, which since embracing generative AI has instructed its users to eat glue, Wikipedia’s community has kept its articles relatively high quality. As I recently reported last year, editors are actively working to filter out bad, AI-generated content from Wikipedia.
A page detailing the the AI-generated summaries project, called “Simple Article Summaries,” explains that it was proposed after a discussion at Wikimedia’s 2024 conference, Wikimania, where “Wikimedians discussed ways that AI/machine-generated remixing of the already created content can be used to make Wikipedia more accessible and easier to learn from.” Editors who participated in the discussion thought that these summaries could improve the learning experience on Wikipedia, where some article summaries can be quite dense and filled with technical jargon, but that AI features needed to be cleared labeled as such and that users needed an easy to way to flag issues with “machine-generated/remixed content once it was published or generated automatically.”
In one experiment where summaries were enabled for users who have the Wikipedia browser extension installed, the generated summary showed up at the top of the article, which users had to click to expand and read. That summary was also flagged with a yellow “unverified” label. An example of what the AI-generated summary looked like. Wikimedia announced that it was going to run the generated summaries experiment on June 2, and was immediately met with dozens of replies from editors who said “very bad idea,” “strongest possible oppose,” Absolutely not,” etc.
“Yes, human editors can introduce reliability and NPOV [neutral point-of-view] issues. But as a collective mass, it evens out into a beautiful corpus,” one editor said. “With Simple Article Summaries, you propose giving one singular editor with known reliability and NPOV issues a platform at the very top of any given article, whilst giving zero editorial control to others. It reinforces the idea that Wikipedia cannot be relied on, destroying a decade of policy work. It reinforces the belief that unsourced, charged content can be added, because this platforms it. I don't think I would feel comfortable contributing to an encyclopedia like this. No other community has mastered collaboration to such a wondrous extent, and this would throw that away.”
A day later, Wikimedia announced that it would pause the launch of the experiment, but indicated that it’s still interested in AI-generated summaries.
“The Wikimedia Foundation has been exploring ways to make Wikipedia and other Wikimedia projects more accessible to readers globally,” a Wikimedia Foundation spokesperson told me in an email. “This two-week, opt-in experiment was focused on making complex Wikipedia articles more accessible to people with different reading levels. For the purposes of this experiment, the summaries were generated by an open-weight Aya model by Cohere. It was meant to gauge interest in a feature like this, and to help us think about the right kind of community moderation systems to ensure humans remain central to deciding what information is shown on Wikipedia.”
“It is common to receive a variety of feedback from volunteers, and we incorporate it in our decisions, and sometimes change course,” the Wikimedia Foundation spokesperson added. “We welcome such thoughtful feedback — this is what continues to make Wikipedia a truly collaborative platform of human knowledge.”
“Reading through the comments, it’s clear we could have done a better job introducing this idea and opening up the conversation here on VPT back in March,” a Wikimedia Foundation project manager said. VPT, or “village pump technical,” is where The Wikimedia Foundation and the community discuss technical aspects of the platform. “As internet usage changes over time, we are trying to discover new ways to help new generations learn from Wikipedia to sustain our movement into the future. In consequence, we need to figure out how we can experiment in safe ways that are appropriate for readers and the Wikimedia community. Looking back, we realize the next step with this message should have been to provide more of that context for you all and to make the space for folks to engage further.”
The project manager also said that “Bringing generative AI into the Wikipedia reading experience is a serious set of decisions, with important implications, and we intend to treat it as such, and that “We do not have any plans for bringing a summary feature to the wikis without editor involvement. An editor moderation workflow is required under any circumstances, both for this idea, as well as any future idea around AI summarized or adapted content.”
I knew AI would eventually come for one of the greatest things humans have ever used the internet for, but I'm so disappointed that it has come from within.
I've cancelled my monthly donations. We can't trust the Wikimedia Foundation at all, ever again. Genuinely sickening anti-human sentiment from those freaks.
It is so concerning given that they're entrusted with something so collaborative and so amazing.
American healthcare is too expensive. This is particularly true of brand-name drugs. Although our nation accounts for 4.2% of the world’s population, we consume 13% of the world’s prescription drugs and pay half of the world’s costs for these products. GLP-1 drugs are a case in point...Drug companies need FDA approval before they can market a newly patented drug. Unlike other countries, the FDA can’t consider a new medication’s price or the existence of equally effective, lower-cost alternatives in reaching its decision...Once FDA approval is secured, Medicare typically covers the the drug’s cost because it is not allowed to negotiate with drug companies as other countries do...It’s the main reason the U.S. pays far higher prices than other countries...Rather than bankrupt the federal treasury or, alternatively, pass the costs on to states and tens of millions of American families, Congress should focus on lowering costs and improving the value of American healthcare.
Although GLP-1 drugs offer many health benefits, their high cost has created an affordability crisis for patients. With a dose of common sense, we can solve this problem.
Every time Israel starts bombing a country, the Western media goes into overdrive to pretend that the local population is very happy that Israel is bombing them and "freeing them from their oppressive leiders"
A good recent example would be with the Druze population in Syria where instead of invading Syria, Israel was "protecting the Druze". The media also did it for Hamas and Hezbollah.
Mouin is flipping that on it's head by pretending that all Israelis are very happy that they are getting bombed by Iran to showcase how ridiculous the Israeli narratives were
Every time Israel starts bombing a country, the Western media goes into overdrive to pretend that the local population is very happy that Israel is bombing them and "freeing them from their oppressive leiders"
A good recent example would be with the Druze population in Syria where instead of invading Syria, Israel was "protecting the Druze". The media also did it for Hamas and Hezbollah.
Mouin is flipping that on it's head by pretending that all Israelis are very happy that they are getting bombed by Iran to showcase how ridiculous the Israeli narratives were
Meta devised an ingenious system (“localhost tracking”) that bypassed Android’s sandbox protections to identify you while browsing on your mobile phone — even if you used a VPN, the browser’s incognito mode, and refused or deleted cookies in every session.
This is the process through which Meta (Facebook/Instagram) managed to link what you do in your browser (for example, visiting a news site or an online store) with your real identity (your Facebook or Instagram account), even if you never logged into your account through the browser or anything like that.
Meta accomplishes this through two invisible channels that exchange information:
(i) The Facebook or Instagram app running in the background on your phone, even when you’re not using it.
(ii) Meta’s tracking scripts (the now-pulled illegal brainchild uncovered last week), which operate inside your mobile web browser.
But the conversation is unique in each community. And each community may not have federated to every instance. This is the Fediverse, not a single site with sub communities.
I do think it would be nice if a client/backend could: - Take any cross-post link from the main post - Query any description/comments for cross posts - Add to the currently displayed comments - Tack on descriptions as comment blocks with an @ to the cross posting OP to the displayed description - Mark cross-posts as read when main is read
This would be easier in Lemmy, but could be done with a client, Thunder might be interested.
It was posted 3x to the Privacy@lemmy.ml community. Or at least it looks to me like 3 different accounts posted the same thing to this very community.
I don't really care about how it works, I'm just tired of the chan-esque experience where I have to question my sanity because I see the same posts every day.
Just because people that don't actually participate in a given community, thus not seeing the older posts, share the same article because they look for a community that fits and dump it there.
Some subreddits had bots that detected and removed reposts and guided OP to the original post for them to add their discussion points.
Same Unfortunately, I use Marketplace for some things and Meta made it damn near impossible to use a browser for posting marketplace listings and responding to DM's
This is a big factor for me. Attracting local people means that I can meet up in person and not have to spend additional money for shipping ,or worry that the item arrived damaged or is lost during transit.
This is the problem with the network effect, everybody using marketplace is saying the same thing. I’m not trying to shame you in particular for this or anything but I think it’s important to consider that at some point if we don’t just make the move off anyway, nobody ever will
Since January Google has been using browser fingerprinting and IP triangulation to track across incognito windows.
Meta wants in the game as well. Nothing done on a phone with Meta apps is done in isolation.
Edit: seems like only vanilla mobile browsers affected. Brave was not vulnerable, DDG minimally so, and I expect Iron/Waterfox with uBlock would also not have allowed tracking.
Researchers found Meta and Yandex secretly tracked Android users via localhost, linking web activity to app IDs, even in Incognito. This widespread abuse bypassed privacy controls.
Let's say you use a VPN, and all your internet traffic comes from an IP in London. 178.238.10.1.
It doesn't matter if you have a VPN, if you log in to anything with any account tied to your real name (yourname@gmail.com), your email and anything done on that London IP are all linked. Google builds a profile on you based on the activity on that IP. AND your browser profile. Private/incognito window or not, if there's a Google tracker on the site, they connect it all. Google doesn't care about private windows. If you go to reddit in a private window on the same IP as your gmail, Google sees that and tracks every page you look at.
So let's say that you log into your email from work. Google now has a treasure trove of new info about you and people you know. Same for FB, who uses the fact that you and someone else were logged on from the same IP range to suggest new friends.
Let's pretend that you live in China and still have access to a VPN and want to learn about the Tienanmen Square Massacre. But the government can ask Google about you. What do you need?
an IP never ever used with an account associated with an account with your real name.
a no-log VPN that won't tattle on you if asked what sites did you access on a specific date.
a browser fingerprint never ever associated with an account tied to your real name.
Nah, the script connects to a server run by the Instagram or Facebook app and feeds it info, bypassing isolation mechanisms entirely. I think ublock or other script-blocking add-ons might work though.
A robot told me: The Meta/Yandex exploit worked by having JavaScript running on a website (such as Meta Pixel) connect from the browser to a native app on the same device via the localhost (127.0.0.1) interface, using HTTP, WebSocket, or WebRTC. This communication occurs entirely within the device and does not traverse the network in a way that browser extensions like uBlock Origin can intercept or block. Browser extensions generally cannot block or even see requests made to localhost sockets, especially when those requests are initiated by scripts running in the browser and targeting native apps on the same device
Be brave, do it. I just did it a few months ago. Just push the trigger and delete it. Let it go. They will of course keep the data, but at least not legally anymore.
I haven't deleted it because there are a couple of people I might theoretically need to get in touch with at some point that I don't have contact with otherwise.
I held on to this possibility for similar reasons for years, but after some honest self reflection I cannot say there would be anyone from my past life who is still important and I have no other means to contact, my Facebook bubble from 10 years ago and more is long dead, i.e. similarly inactive.
Maybe giving people an email address, phone number or username somewhere else via Facebook message before leaving for good could also be a solution.
Yeah, but they'll still create a shadow profile on you and track your data anyway. Have a friend with an account? Your name and phone number is known to them. Even without a true identity attached, they will track you from your own devices, and then correlate that with everything else they can at every opportunity.
Also, Facebook is preinstalled as a system app (cannot be uninstalled without adb) on various manufacturer's and carrier's android builds.
IIRC Facebook was not installed by default on my Samsung A32, and there is no trace of it now so I don't think I removed it. shrug Otherwise, use privacy features in your browser/on your device
I can't remember which one of my phones, probably a Samsung that had Facebook installed and couldn't get rid of it. People were like, you can just not open it or something. There's a good reason I don't want it on my device.
I did a 'download all your data' on Facebook a while back and there wasn't anything about my tracked browser history. Does this mean they've also violated the "users should be able to see the data you have on them" article of the GDPR as well?
I'm guessing they're trying to hide behind weasel shit about the ids being anonymized or something as though it wasn't trivially easy for them to deanonymize....
I have my own company that helps companies websites. There is a company called 6sense that scares the crap out of me. They are able to use Facebook, insta, and reddit. They are able to assign an id to you, even in incog.
They have some crazy algorithm that can eventually match you to the real you. Then stick you in a cohort to sell to you.
It's actually kind of amusing and pathetic to me that they're doing all this malignant privacy breaching, and putting such massive effort into it, but then only using it to serve you advertising, which I largely ignore anyway.
Why software do you use in your day-to-day computing which might not be well-known?
For me, there are ~~two~~ three things for personal information management:
for shopping receipts, notes and such, I write them down using vim on a small Gemini PDA with a keyboard. I transfer them via scp to a Raspberry Pi home server on from there to my main PC. Because it runs on Sailfish OS, it also runs calendar (via CalDav) and mail nicely - and without any FAANG server.
for things like manuals and stuff that is needed every few months ("what was just the number of our gas meter?" "what is the process to clean the dishwasher?") , I have a Gollum Wiki which I have running on my Laptop and the home Raspi server. This is a very simple web wiki which supports several markup languages (like Markdown, MediaWiki, reStructuredText, and Creole), and stores them via git. For me, it is perfect to organize personal information around the home.
for work, I use Zim wiki. It is very nice for collecting and organizing snippets of information.
oh, and I love Inkscape(a powerful vector drawing program), Xournal (a program you can write with a tablet on and annotate PDFs), and Shotwell (a simple photo manager). The great thing about Shotwell is that it supports nicely to filter your photos by quality - and doing that again and again with a critical eye makes you a better photographer.
xpipe – I use it to SSH into any of my servers, cluster nodes or directly into docker containers without having to remember hostnames, IPs, users. It can also bring your useful scripts to said ssh session without "installing" them on the target device, which is great because you don't have to set it up for every new server. Also the dev is a really nice guy.
Portmaster + SPN – I use it to route each app through different VPN paths with multihop support and per app firewall rules. (e.g. one app via Denmark, another via a random country, third app no VPN, fourth app gets no internet at all etc.) It really gives you full control over the traffic. afaik there is no other all in one app like this.
wdfs - It's an old project that is patched by this random github user. It's the only way I found to mount a webDAV storage cleanly into a directory from a bash script without fucking with my fstab or being root or giving specific privileges to my user. I mount it from a bash script because that way I can use KDE wallet to store the credentials instead of having a plain text file somewhere on my fs, the script waits until the wallet is unlocked, then reads the credentials from it and mounts the webDAV to a path in my home. That is more accessible to apps and other scripts (e.g. recent files) instead of doing it via Dolphin, which generates a random string in the path every time when opening network storage.
XPipe is a new type of connection hub that allows you to access your entire sever infrastructure from your local machine. It works on top of your installed command-line programs and does not require any setup on your remote systems.
Can rclone mount it transparently? I thought it is more like a one time copy / sync.
What I mean by that is that the remote storage should look like a normal directory to the rest of the system and any reads and writes should go over the network directly to the remote without occupying local disk space.
Also it seems to me that you have to write your credentials to the rclone config file, which I explicitly don't want.
Herbstluftwm, the window manager. I used i3 for a decade, then bspwm for a few months, then landed on hlwm which I've been happily using for over a year. I don't foresee changing until I'm forced to switch to Wayland. I've used almost every window manager and DE available for Linux and Solaris. Hlwm has things I can no longer live without:
It's entirely configuration-file-less, which means the CLI client is the first class citizen for C&C.
It's tiled and keyboard controllable is, again, a first-class citizen
It has a sane tree model, with no weird exceptions
It's stable
It's fast and small. You never see it in top, sorting either by CPU or memory
Zsh, the shell, in which I run 90% of my applications (the regular exceptions being the Luakit browser and Factorio, the game. everything else is CLI or a TUI). Zsh is bash backwards compatible, and it has a bunch of extra convenience syntax that makes scripting more powerful, pushing out the border where switching to a real programming language is necessary. I have lived in sh, bash, and csh over my life, and I've tried fish and a number of others; the rich data model for process communication is compelling, but I've always discovered it lacking, so on zsh I remain.
Tmux, the terminal multiplexer, which is (almost) invariably the first child of every terminal (rio -e 'tmux attach -t#'). Because terminals crash, because it survives session restarts, because it lets me log in remotely and continue what I started in my desktop, and because it works over ssh and having a consistent multiplexer environment across machines is nice. I used sceen for years before discovering tmux, and have tried almost every other terminal multiplexer; and none add any significant value for me over tmux.
Helix, the editor in which I spend most of my time. Because I started with emacs and used it for years before switching to vim. Then I used vim for decades before switching to Kakoune. Then I used Kakoune for about 2 years before switching to helix. Kakoune was too much like Emacs for my taste: heavy on chording, light on modality. Helix is much more like vim: lighter on chording, more mode-driven. Chording aggravates my carpel tunnel, and I'm more comfortable in modal editors. I switched from vim because the plugins necessary to be a competent development environment got insane, and my vim was starting to take as long to start up as emacs, which was unacceptable. Also, LSP integration was super flaky and broke every six months; it's what initially drove me to Kakoune.
I'm currently using Rio as my terminal. It has bugs, but it's actively developed and regularly releases will fix one more thing. It has both ligature and sixel support, and it's wildly fast and far, far less memory intensive than either kitty or ghostty, which are both pretty fat. I am not including it in "the list" because some remaining bugs are pretty big, like randomly crashing when it gets resized or sees some sequence of asci escape codes. It's not much of an issue because I run everything in tmux, and it crashes less with every release, but I hesitate to recommend it until it's more stable.
That's one I don't remember, but I probably wouldn't have: the config file is in Lisp. Not only is Lisp something I never use anymore, which gives it a high cognitive load, but I don't particularly care for Lisp-like syntax.
I'm certain there are several less common WMs that I haven't tried. It'd probably be almost impossible to try every WM every written for X; it seems to be a common hobby project for folks interested in the X protocol.
I did say "almost every", but perhaps even that was exaggeration. I do think I've tried the majority, though.
My differentiator for hlwm, the killer feature, shared by only two other projects that I'm aware of, is that hlwm has no configuration file. All configuration is performed through client commands. Every command interaction that can be performed by a user input - and much that can't - can also be performed on the CLI. All (?) windowing events can also be monitored on the command line, and therefore scripted. The other two WMs that share at least some of these features are bspwm and river.
+1 for helix. I was new to linux and TUI editors. The vim tutor was a good intro to the concept of modal editors, but needed lsp and syntax highlighting. At the time I struggled a lot with configs, so neovim was out. Helix is just a fantastic, batteries included experience. Approachable for beginners, but feature rich for novices.
Right now jeena.github.io/recoder/ which I just released and here is why (copied from the website):
🎬 Why Recoder?
I used to edit family videos in Kdenlive without a problem — it handled footage from all our devices without complaining. But then I switched to DaVinci Resolve, and suddenly nothing worked right. My Sony Alpha 7C, my Galaxy S24, and my wife's iPhone all produced files that Resolve couldn’t handle without transcoding.
😤 Too Much Fuss, Too Many Steps
Every time I wanted to edit, I had to hunt down the right ffmpeg settings and manually run them on each video — a frustrating and repetitive task.
My typical workflow is simple: I create one folder per event on an external HDD and drop in videos from all our cameras. A script renames the files based on the date and time so I can easily sort them. But for Resolve, everything has to be transcoded to DNxHD — which only supports resolutions like 1920×1080 and 1280×720.
🔄 Vertical Videos? Extra Pain
That also meant vertical videos couldn’t work. So now, I rotate them during transcoding to preserve resolution and rotate them back in Resolve during editing.
✨ Enter Recoder
I built Recoder to automate this annoying step — so I could spend more time editing memories and less time fiddling with command-line tools.
GNU parallel, to run commands on all cores, and for its filename pattern substitution.
For example: ls *.flac | parallel ffmpeg -i {} {.}.mp3 encodes a directory of FLAC files to MP3. parallel -a <(ls *.flac) -a <(ls *.mp3) --xapply copytags {1} {2} then copies each FLAC file's metadata to the corresponding MP3 file (which ffmpeg already does, just to illustrate the --xapply option).
KDE's Dolphin + Konsole's integration to Dolphin is great for seamlessly managing files with an UI and terminal hybrid.
Though closed source (overly dramatic music plays), the text editor Sublime Text works great, and at least with major version 3 (last I checked it was in version 4), it can be converted to AppImage without major issues (at worst, paths with spaces have issues).
Firejail is great for starting specific programs offline.
Newsboat is the best RSS feed reader I could find for Linux, specifically due to, with its inbuilt macros, I can set it up to open in new tabs several posts from a comically large amount of feeds.
Whoa, I had no idea! I knew about alt+shift+F4 to open a terminal in the current folder, but that spawns a whole separate konsole instance, F4 is amazing, thank you!
You press F4 and a window within Dolphin comes up, already "cd-ed" to the current directory, the terminal working as Linux's default bash terminal: media.ani.social/01/97/74/79/4…
Seems like a simple thing? Indeed. But it's a small detail that saves a lot of time in the long run for helping with the workflow. No need to switch back and forth between two different windows.
and the konsole is kept automatically in the dir you are currently. is very handy when you need do do something in the terminal and you need immediate feedback.
Download FreeFileSync 14.3. FreeFileSync is a free open source data backup software that helps you synchronize files and folders on Windows, Linux and macOS.
Qalculate!, the calculator I use every time I need to do a calculation, especially if it involves units or currency conversion. Does everything I've ever needed out of an everyday calculator (even symbolic calculation and exact results), while keeping the usual simple calculator interface.
FreeTube, a desktop client to watch YouTube videos, without an account. Why not use a browser without an account? Well, it has a watch history, favorites and subscriptions as if you had an account - but its all "offline" account, without Google involved (besides watching their video). So it manages an account with subscriptions, without YouTube account. Plus it integrates an ad blocker and SponsorBlock, and has a few more features on its sleeve.
kdotool, a xdotool like program for KDE on Wayland. Just learned about it when setting up another application. But I will use it for independently too.
There are more, but this is what came to my mind right now.
I like game emulation and to manage my ROM library, I use Geode-GEM. It is simple but cusomizable app to manage your ROM based on console and emulator you have.
I've used it a lot just to control audio or video playing on my computer from my phone. (Sometimes when I'm sat at my computer with multiple windows and workspaces open, I even find it easier just to hit my phone's lockscreen to pause the music.)
I'm starting to use some of its other features, too. E.g. copying & pasting and sharing files between phone and computer.
KDE connect can be good too but I like localsend for sharing files with any and all devices like when I'm moving phones and need to send a file to the new one or between my PCs. You're not wrong though, KDE connect works well for fileshare too.
Espanso Text Expander. Its not Linux specific but its got so many uses. You can even use it with bash scripts to have essentially alises/text shortcuts for short or massive amounts of text. I use it for so many code snippets and template texts in Neovim and other applications that involve typing.
I've used espanso for about 4, maybe 5 years and haven't encountered this issue. I even have to compile it myself because it's daemon mode uses systemd on Linux and I dont run a distro that uses systemd and had to modify the source code slightly. I do run it in managed mode, essentially invoking it from a startup script when my window manager starts up.
Long story short, what you encountered might have been related to how it integrates with the init system and you might try and run it directly from a startup script. Simple test is to just try and install the latest version and see if you have the same issue.
Thanks for the feedback - It was a systemd issue. Something caused it to continue generating slices for espanso until the machine locked up - probably spawned with each terminal. It happened on out of date fedora install 36 (when 41 was out) with gnome on it.
Since then I've moved to a window manager for all my machines and would likely invoke it the same way - perhaps now it's time to revisit!
Transparent proxy server that works as a poor man's VPN. Forwards over ssh. Doesn't require admin. Works with Linux and MacOS. Supports DNS tunneling. - sshuttle/sshuttle
Run Windows apps such as Microsoft Office/Adobe in Linux (Ubuntu/Fedora) and GNOME/KDE as if they were a part of the native OS, including Nautilus integration. Hard fork of https://github.com/Fmst...
FreshRSS - Self-hosted RSS feed aggregator with multi-user support, mobile API, and custom tags.
AudioBookShelf - Self-hosted audiobook and podcast server with mobile apps and progress syncing across devices.
PhotoPrism - AI-powered photo management platform with facial recognition, geo-tagging, and automatic organization.
Jellyfin - Free media server for streaming movies, TV shows, music, and photos with no licensing restrictions.
Karakeep - Personal data backup and synchronization tool for maintaining local copies of online content. AI tagging, lists, easy to use interface. Really good stuff, especially combined with a browser plugin.
Productivity, Documents & Task Management
Vikunja - Task management app with Kanban boards, Gantt charts, multiple views, and team collaboration features.
Memos - Self-hosted memo hub for capturing and sharing thoughts with markdown support.
Docker Obsidian - Containerized version of Obsidian knowledge management app for browser access.
Stirling PDF - Comprehensive PDF manipulation tool with 50+ operations including merge, split, convert, and OCR.
Paperless-ngx - Document management system with OCR, tagging, and full-text search capabilities.
LanguageTool - Grammar and spell checking service with support for multiple languages and integration APIs.
Good Deeds
Archive Team Warrior - Docker container for contributing computing power to internet archiving projects.
I have been running Jellyfin for a while now with great success, and prefer Immich over Photoprism. The rest look real interesting, especially Sterling PDF.
I was using it for auto tagging of categories. I haven't tried immich but I just moved my photos to my snapraid, so I might give it a shot. It looks like it's come far since I looked last.
It does work really well. Backs up everything, the mobile app works. Though I am having trouble with it auto switching URL dependant on local or remote but I think that's a me thing
It is really good for organizing and distributing text, media and files like with gopher. And I think due to its simplicity, it is perfect for using it in a home or lab network.
Gemini is kinda a modernized version to the old Gopher protocol. Its purpose is to share hyper-linked text documents and files over a network - in the simplest way possible. It uses a simple markup language to create text documents with links, headings etc.
It is much, much easier to write hyper-linked documents than in HTML
a server is much much smaller and easier to set up than a web server serving HTML. It can easily and securely run on a small Raspberry Pi without special knowledge on server security.
in difference to gopher, it supports modern things like MIME and Unicode
There are clients for every platform including Android and iOS
also, there are Web gateways which allow to view stuff in a normal web browser
unlike Wikis, it is only concerned about distributing content, not modifying files. This means that the way to store and modify content can be matched to the use case: Write access to content can be via an NFS or Samba server, or via an SFTP client like WinSCP or Emacs.
the above means that it does not need user authentication
the protocol is text-centric and allows for distraction-free reading, which makes it ideal for self-hosted blogs or microblogs.
Practically, for example, I use it to share vacation photos with family.
Two more use cases that come first to my mind:
When I did my masters thesis, our lab with about 40 people had a HTTP page hosted on a file server that listed tools, data resources, software, and contact persons. That would be easier to do with Gemini because the markup is simpler. Also, today it would not be feasible to give every student write access to a wen server's content because of the complexity of web servers, and the resulting security implications.
One time at work, we had a situation with a file server with many dozens of folders, and hundreds of documents. And because all the stuff had been growing kinda organically over many years, specific information was hard to find. A gemini server would have made it easy to organize and browse the content as collaboratively edited hypertext which serves as an index.
Thanks... I had no idea this existed. I can now connect to the work remote desktop software with a single window perfectly integrated. This is incredibly helpful. Moreover I can now say I'm using Winapps in order to run Windows App. I guess now they can rename the remote desktop app again to Winapp to go full circle. Or maybe Winamp, just to confuse people. Or just App, to make it impossible to ever troubleshoot.
EDIT: At any rate, this works really beautifully. It's a bit of a PITA to set up if you're having the VM via virt-manager but hell if it's not as smooth as native.
Topgrade - Upgrade all your system packages and dependencies in one command.
Keeping your system up to date usually involves invoking multiple package managers.
As someone who worked build/rel before working OS security: if you're intentionally breaking Single Source of Truth for software state management, then you're in for a bad time. This can only delay the inevitable, but the technical debt comes at a high credit cost on top.
Building an RPM is SO trivial to do, even without some LLM feeding it to you; and maintaining an existing one or rebuilding it to suit another distro or version even more trivial. Save your sanity and avoid out-of-band 'package' managers!
For me it's Perl's rename, which of course cones in a variety of package names depending on the distro you use. In trying to find a link, I landed on this stack exchange answer that gives a great overview of how the tool works and the different packages available on different distros.
I have to bulk rename files every day, and using regex and the other features of Perl's rename makes it so much easier to do.
ed (which is the more frugal, older brother of vi/vim) might indeed be a bit under-hyped. Which advantages does it have for you?
Funny thing a while ago I had a small side-project for a data collection task in my PDA - a kind of minimal database to record daily stuff. So, a PDA has limited screen space and typing speed, and I tried to make the UI with as little typing as possible. And then it dawned to me that I was essentially replicating ed's interface!
I started on Logseq, because I'm a contributing open source advocate. I fully intended to stay with Logseq.
However, it seems to indent everything in the markdown including headings, bullet points and so on. When one loads a document into a markdown editor, one ends up removing all these indents before the document becomes 'valid'. They've made some other unusual design choices that mean the markdown doesn't read very well in plain text. I used Logseq for a year.
There's also a difficulty for me with getting help. For some reason Logseq help community seems to be based around the Discuss (sp?). It's not easy to read because the lines are very short as it's a messaging platform. The community is very very active though.
I eventually got frustrated with trying to debug my Markdown outside Logseq, and went looking for another vehicle.
Rather distressed, I installed Obsidian. It's been designed with a more logical approach. To link to a heading in another document, the document is linked in a Wiki-like way (if you've chosen that format) with the heading separated by a hash symbol; in Logseq you get an unintelligible UUID plus all that indenting.
There's a lot of help within the Obsidian community but some of it is locked down in medium paid-for content. However, the hundreds of Obsidian YouTube channels and videos, obsidianrocks and obsidian.md sites are very well authored. AI searches augment the rest, TBF I don't really use Google proxies anymore.
Even though I'm a personal user, it's worth it to me to buy a commercial licence to show my appreciation for the work that the two(?) developers have put in.
The plugins use the published API and are all (?) open source AFAICT.
Most of the issues I have with Obsidian are just related to my workflow. I think that there are probably plugins that will solve them.
I don't expect to be looking for another note-taking app anytime soon and it's been over a year since I started with Obsidian. Understanding templates opened my world up enormously. I haven't started data-mining in any meaningful sense yet.
I tried logseq to manage my notes at work and it just didn't click with me.
I ended up using QOwnNotes qownnotes.org/ which might be not as polished, but it is very easy to start with. I don't need nor want cloud/sync, and since this ones notes are plain .md files in a folder, it's easy to back up (or edit) externally when needed. I like it for what it does.
As far as I’m aware, Logseq also just uses .md files. I back those up regularly and I do use the cloud sync. The cloud sync lets me alternate use between my computer and my tablet for work. I could use just one device, but this was a significant advantage for me.
I also keep a separate log for personal work which I can add to via special shortcuts from my phone.
Great topic. I'm going to have to investigate some of these suggestions later.
Since my first pick, helix, was already mentioned here and i commented on it, I'll add gitui. Git can be very overwhelming for me. Gitui arranges frequently used git commands in a sensible, visual layout and makes it easy for me to understand and interact with git.
For doing more complex tasks with git, you could have a look at jujutsu. It is really good and provides most of git's power in an conceptually much simpler CLI interface.
Thanks for the rec! The anonymous branches and working-copy-as-commit subsuming git stashes is intriguing. I'll give it a closer look when I have a chance.
Pinta is the main one that comes to mind. I don't use it every day, far from it, and that's a part of why I love it. On the rare occasion that I have to do some image editing, I load up Gimp and then proceed to fight against it for at least a whole day to make it do the simplest of things before finally ragequitting. Then I load up Pinta and actually get the task done in either minutes or hours at most.
It's like old school MS Paint, but better. Simple, intuitive, no huge learning curve, just enough features to get my nonprofessional tasks done. It should be a distro default.
Pinta is a free, open-source program for drawing and image editing. It combines powerful features with an easy-to-use interface, making creativity seamless. Available for Linux, Mac, Windows, and *BSD.
digiKam was the first Linux application I encountered that was so polished and useful for what it does that I tried to shoe-horn it into any and every DE I experimented with, as well as installing it onto my windows machines under KDE4Win.
Sorry to thread jack. One little app I miss from Windows is a simple screengrab annotator? Wondering if people have anything to recommend.
Eg to circle some on screen text, add an arrow and maybe add some of my own text.
I cant get my Loigtech KB to screen grab, so I just use the Screengrab app in Mint, which is fine but zero annotation abilities.
I have tried Flameshot but it is a shitshow and doesn't work properly and is unstable (for me) and doesn't allow me to put it in the clipboard and paste in say Signal.
Nah, I've had no issues pasting from the clipboard into signal, from either the Mint screenshot tool or Flameshot. Not sure what issue the top commenter is having...
I don't have issues you are describing with flameshot, however a clipboard manager greatly enhanced the copy-ability between apps and certain websites (looking at you JIRA and Slack), including when the source is flameshot.
dealing with logitech devices. i love their hardware, but i feel like they’re really bad at doing any kind of software… i know that there are alternatives for configuring logitech devices, but i quite enjoy solaar.
System restore tool for Linux. Creates filesystem snapshots using rsync+hardlinks, or BTRFS snapshots. Supports scheduled snapshots, multiple backup levels, and exclude filters. Snapshots can be re...
It could be helpful if you explain what they do and how they relate to your computing needs. For example, I have been using Linux for over 25 years, and the only name in yor list which I have an idea about what it does is Deja Dup (personally, I use tar for backups, in a simple incremental setup).
I know Strawberry, because I use it too. It's a music player, forked from Clementine years ago. I find it the best for my use case, as it can handle library by tags, do folder view for separate locations, do tag editing, lyrics and art download, etc. Can highly recommend!
UpNote. I use it like a combination of the gollum wiki described by OP, but I just put everything in there. I have watch and reading lists for things I want to check out, writing projects, notes for TTRPG games, I keep extensive notes on healthcare-related stuff, and so on. I like UpNote because it's lightweight, has windows, linux, and android apps, and because it has a one-time $25 lifetime membership that does free syncing forever instead of a monthly subscription like most other things seem to. I've tried OneNote, Evernote, Obsidian, Joplin, AnyType, and a bunch of others and didn't like them for various reasons, but UpNote is both pretty small and also has a pretty full-featured editor that can do rich text, all kinds of formatting, media files, etc.
The only thing I've run into that UpNote wasn't ideal for is I started writing a novel a couple months ago and managing the structure and notes and all that got a little unwieldy so I picked up Scrivener. Still wish they had an updated linux client or there was some good, complete, feature-rich linux-native equivalent, but it runs pretty good under wine, so.
UpNote is a clean and beautiful app for writing and organizing notes. It’s easy to use with rich features and delightful experience. Available on Mac, iOS, Android, Windows and Linux.
Well, my main reason to use Zim Wiki and Gollum is that all the information stays on my computers -no sync service is needed, I sync via git + ssh to a Raspberry Pi that runs in my home. And this is a critical requirement for me since as a result of many experiences, my trust in commercial companies that collect data to respect data privacy has reached zero.
The differences between Zim and Gollum are gradual: Zim is tailored as a Desktop Wiki, so each page is already in editing mode which is slightly quicker, while Gollum is more like a classical server-based wiki, which is normally accessed over the browser (but by default, without user authentication). The difference is a bit blurry since both just modify a git repo, and Gollum can be run in localhost, so it is good for capturing changes on a laptop while on the road, and syncing them later. A further difference is that Zim is a but better for the "quick but not (yet) organized" style of work, while Gollum is better for a designed and maintained structure.
Both can capture media files and support different kinds of markup, while always storing in plain text. Gollum can also handle well things like PDFs which are displayed in the browser, and supports syntax highlighthing in many programming langages, which makes it nice for programming projects - it is perfect for writing outlines and documentation of software, and I often work by writing documentation first.
Yeah, I have since discovered pCloud as a replacement for OneDrive and that I could just have everything saved to a pCloud directory to auto-sync.. but IMO UpNote is worth the $25 anyway so I don't mind. Also it requires considerably less effort to just install the android app vs setting up some kind of multi-device syncing with pCloud/equivalent and managing that myself. I guess I value convenience over privacy in this one area.
Thanks for the explanation re:gollum/zim, I was curious why you were using 2 different sets of software to accomplish what seemed like the same thing. My notes are definitely more of the 'scribble some shit down and organize it later if I get around to it' variety, but I stopped using zim because I wanted synced notes with multiplatform apps and also it felt a little archaic, and I wasn't really using the real star feature of wikis (cross-linking) anyway, I just wanted something with a traditional tree structure.
in other distributions, these packages normally have the same names.
Also, if you need something, I've found it often to be a good strategy to sit and write down what you personally need from a software - what are your requirements, and then go and search which available software matches these. The other way around, there are just too many alternatives: Any larger distro has tens of thousands of packages, and you won't have time to try them all.
EarlyBird is a sensitive data detection tool capable of scanning source code repositories for clear text password violations, PII, outdated cryptography methods, key files and more. - americanexpre...
You’ve heard of it for sure, but shout out to Audacity. I used Cool Edit Pro for years before having to switch to Adobe Audition. The UI in Audacity feels surprisingly familiar and it does what I need it to do.
Audacity is the world's most popular audio editing and recording app. Edit, mix, and enhance your audio tracks with the power of Audacity. Download now!
AutoKey automation / word expander tool. - I reconfigure ALT + i/j/k/l to ↑←↓→ globally, and more similar shortcuts. - It expands abbreviations of one's choice like "gCo" to git commit -m ' - One can assign scripts to abbreviations and hotkeys. E.g., when I press CTRL + Shift + [ it surrounds the selected text with a tag:
text_selected = clipboard.get_selection()
text_input = dialog.input_dialog(title="Wrap with a tag.", message="E.g., type cite to get <cite>x</cite>.", default="")
keyboard.send_key("<delete>")
clipboard.fill_clipboard(f"<{text_input[1]}>{text_selected}</{text_input[1]}>")
keyboard.send_keys("<ctrl>+v")
I'm likely not even harnessing AutoKey's full capabilities and it's already absolutely indispensable for being a huge time-saver and annoyance reducer.
Steam added an excellent screen capture feature to their overlay, but I like being able to capture my screen anytime, not just when playing games with the steam overlay.
gpu-screen-recorder is the perfect tool for this, you set up a command to run at startup and the software records the last X minutes in the background, with barely any hardware utilization. Add a hotkey for another command that saves the recorded clip to a file, and boom, simple and efficient replay recorder. I'm honestly surprised this app wasn't mentioned yet.
units is really powerful. I worked with the team there to appropriately support Gaussian units since it seems no other tool would—took a bit of retrofitting to support fractional exponents like "grams^1/2", but I have yet to find another tool that handles this even remotely correctly.
If you don't want to bother with a CLI app and specific syntax to follow, there's rofi-calc, it's super fast to load since it's just rofi and it understands natural language. When I stumbled upon it I found the idea of a calculator that understands you when you type "30 feet in mm" or "10 usd in euros" completely mindblowing. Props to qalc for making it possible
I mean the syntax for gnu units is literally the same unit expression used in math. m^2, cm, m/s etc. the ft;in looks weird because it's two units combined.
Your example in it would be units 30ft mm , use -t for terse results that's just the final value.
It's definitely usable if you know the right abbreviations to use, and it seems a lot more concise which much be convenient if you're used to the syntax! But I find natural language also has a lot of advantages, especially for converting units you don't see often and have no clue how to abbreviate, like when watching videos that give you measurements in weird units. Plus my brain tends to freeze when something looks like maths, so natural language is easier to use for me (even though I know it's THE EXACT SAME calculation 😅 ).
Again, you can type feet instead of ft and it'll work. You can write 'feet per second' instead of 'ft/s' and it'll work. Natural language has its benefits but when you have a very simple syntax model then there's less chances of it making a mistake.
I would say Rymdport (github.com/Jacalz/rymdport). It's a GUI for the magic-wormhole tool (another recommendation in itself). It let's you easily and safely transfer files to another computer.
I use Localsend to send files between my computers. Also to family and friends if they are local at the time. I keep seeing magic-wormhole mentioned on Lemmy. Do you know if wormhole is better somehow? Is it worth me trying it?
Biggest difference is that wormhole will pass traffic between devices on different networks as long as both are routable. So it's not limited to a local network connection.
Very different tool. Magic-wormhole is dead simple, works over CLI and requires no setup. It's not dependant on computers being within the same LAN. I wouldn't use it with non-technical people. For users with some skill Rymdport is an option for them to interface with magic-wormhole. The tool is great for transferring secrets when setting up computers for example.
gnome-network-displays let's you cast your screen to a wireless display (Miracast) or to a Chromecast device.
It works with KDE no problem and even under Wayland.
It creates a virtual display that can be organized like any other display: unify with another screen or extend the desktop using your DE's default method/UI. And then it uses standard screen sharing conventions to send content to that virtual display.
I don't know what kind of dark arts the developer(s) employed to make this possible, but the end result is simple wireless display in Linux that just works! A MUST for using Linux in a business setting.
Damn... I might consider swapping the other way then. KDE is great. Especially the file browser and "KDE connect" for android is fantastic. There's just issues like these now and then
Doesn't even work well on a single monitor on Wayland. It gets confused with screen size or sth, fills a small area on top left with screen contents and lot of black space
Last windows I used was 10,and I've always found it lacking in the screen capture arena. Full disclosure, I had no idea Flameshot had a windows version.
It's like apt for installing directly from Github releases. A plug, sure, but I still use it regularly for things like FreeCAD, Cura, OrcaSlicer, and so on.
Boxbuddy makes it incredibly easy to use distrobox, a great way to install software that might not be available for your distro, but is available on another distro, or just a way to keep a piece of software in a stable state (like DaVinci Resolve with davincibox).
If you use a "gaming distro", I'm sure you've seen Input Remapper. It's a neat utility that can create macros for all your peripherals or rebind keys as you like. Want to bind you controller so it works like a mouse? Possible. Want to macro key pressed by using the forward button on your mouse? Possible.
Did you leave Foobar2000 behind when you switched to Linux? Why not give Fooyin a try. It's a relatively new audio player with aspirations of becoming just as configurable as FB2K. For me replaygain is quite important, and while some other FOSS audio players support it, not many has replaygain generation. And Fooyin does. While also being just as easy to set up and use as Foobar. Worth a look.
GNU Stow, definitely. I can't stress enough how wonderful this app has been for my sanity. I use it to manage my dotfiles and personal data.
I made one dotfiles folder, which contains home, etc and usr subfolders. I put all my configs in it (dotfiles, themes, custom keyboard layouts, etc) in the relevant subfolders, then with Stow I symlink dotfiles/home to /home/username, dotfiles/etc to /etc and dotfiles/usr to /usr, and poof symlinks are created for everything in it. That way all my configs are in one folder, I can sync it to my NAS easily, make it a git repo for version control, and even upload it to github. It's amazing 🥰 I also made a personal folder which contains Documents, Pictures, Videos, etc, all symlinked to /home/username/Documents and such, so I only have one folder to back up for my personal data. Yes I'm very lazy and hate doing backups 😅
Rofi (or here for the X11 version) : It's the best app launcher by miles, even if I used a DE I'd still use rofi. But I also use it for a lot of other stuff that it's much less well known for: the run mode for launching scripts and other executables, the ssh mode for ssh, rofi-calc for a very light and fast calculator that understand natural language, rofi-games as a games launcher, rofi-emoji as emoji selector... Rofi is life, rofi is love, rofi is God.
Libation to liberate audiobooks from Audible. There's tons of apps to download and un-DRM your files from various platforms, but most only work on Windows. This one does work on linux 🥳
Lots of self-hosted apps for my media server, but they are all pretty well known (Jellyfin, Audiobookshelf, Komga) except maybe Suwayomi Server for manga (it can sync progress to AniList, and there are plugins to enable downloading from online manga reading sites)
ani-cli for watching anime because I'm a crazy person who grew up with MS-DOS and TUI apps make me happy. Also it's often more convenient than having to check ten different websites to find the one anime you want to watch only to discover that half of them have been taken down.
yt-dlp to download videos from YouTube. I use wrapper scripts to make it more convenient to use because I'm lazy, but it's great.
No I wasn't aware of it but it looks interesting! It seems to have a lot more features than GNU Stow. It says it requires a GitHub repo though, so it wouldn't do for personal data, but for configs it looks interesting!
It doesn't require a github repo, you can use any personal git repository. I personally have set it up with a selfhosted gitea instance. I also assume you could setup a git repo on the device.
I'm a chezmoi user and I'll be honest: as powerful as it is, it's way too clunky to get right. I spend too much time configuring and then am too worried I'll mess it up if I need to add or remove anything.
I'm going to give stow a try to see if it fits my workflow better.
You can install it via flatpak and use selinux as well if you need. You can also encrypt and password protect the database, which can also be held in your keyring.
As with any app its up to you to decide and mitigate any perceived risks.
I don't know if it has been already mentioned but I love bat a lot. It's like the cat command but with colors and line numbers. Makes things a little bit easier.
It's software for budgeting. You can run it entirely local, or set it up as a server. It stores everything in an SQLite dB, let's you import and export CSV files, and it gives you great options for querying and seeing reports on your financial records.
I've got a handful of accounts, so I set up a small python utility to parse the CSVs my banks give me to something actually sensible and readable for Actual. I do that once a month, add a reconciliation entry here and there, and it's all kept on sync very well.
I have one morbid report titled "money pissed down the landlord drain", and it's far higher than I'd like to be. But it's got close to every penny I've ever spent on that bullshit in one place.
Capitalism is violence. Having billionaires while people starve is violence. Denying healthcare while spending billions on military is violence. Supplying weapons or finances to states commiting genocide is violence.
Right now, if you are passive, you are complicit in immense amounts of violence.
Somehow this is lost on liberals. (Or alternatively they believe the once every 4 years elite propaganda contest [elections] or strongly worded petitions are the only effective ways of dissent).
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
Changes to the laws around the use of electric scooters, including the introduction of a minimum age limit, will come into force next Tuesday, 17 June.
Changes to the laws around the use of electric scooters, including the introduction of a minimum age limit, will come into force next Tuesday, 17 June.
Bill Atkinson, the computer engineer at Apple who played a critical role in the development of the Macintosh operating system in 1984 and the ubiquity of the desktop metaphor of files and folders in personal computing, died on June 5 at the age of 74…
Bill Atkinson, the computer engineer at Apple who played a critical role in the development of the Macintosh operating system in 1984 and the ubiquity of the desktop metaphor of files and folders in personal computing, died on June 5 at the age of 74…
Ireland has made moves to become the first European Union country to ban trade with Israeli-occupied territories, while its prestigious university Trinity College has cut all ties with Israel.
Ireland has made moves to become the first European Union country to ban trade with Israeli-occupied territories, while its prestigious university Trinity College has cut all ties with Israel.
The crackdown on pro-democracy labour unions, combined with the decline of the restaurant industry in recent years, has left food delivery workers in a weak position when bargaining with platform operators.
The crackdown on pro-democracy labour unions, combined with the decline of the restaurant industry in recent years, has left food delivery workers in a weak position when bargaining with platform operators.
Rule 1: Israel is never the aggressor. If Israel attacks someone it’s either a response to an aggression that happened in the past, or a preemptive attack to thwart an imminent aggression in the future.Rule 2: History automatically restarts at the date of the last act of aggression against Israel. If someone attacks Israel it was completely unprovoked, because nothing happened before the attack on Israel.Rule 3: Anything bad that Israel does is justified by Rule 2.
L'articolo proviene da #StartMag e viene ricondiviso sulla comunità Lemmy @informatica Il New York Times ha visto crollare negli ultimi tre anni la sua quota di traffico proveniente dalla ricerca organica verso i siti desktop e mobile del giornale dal 44% al 36,5% registrato nell'aprile 2025: tutta colpa, dice il Wall Street
L'articolo proviene da #StartMag e viene ricondiviso sulla comunità Lemmy @Informatica (Italy e non Italy 😁) Il New York Times ha visto crollare negli ultimi tre anni la sua quota di traffico proveniente dalla ricerca organica verso i siti desktop e mobile del giornale dal 44% al 36,5% registrato nell'aprile 2025: tutta colpa, dice il Wall Street
Non c'è. In fondo, i giornali devono essere leggibili, gratuitamente o a pagamento, e nessuno vorrebbe mai sottoscrivere un abbonamento per fruire di una schermata protetta, non copiabile o magari illeggibile come un captcha 😅
A massive data center at xAI’s controversial site in Memphis, Tennessee is emitting huge plumes of pollution, according to footage recorded by an environmental watchdog group.
A massive data centre at xAI’s controversial site in Memphis, Tennessee is emitting huge plumes of pollution, according to an environmental watchdog group.
A massive data center at xAI’s controversial site in Memphis, Tennessee is emitting huge plumes of pollution, according to footage recorded by an environmental watchdog group.
A massive data centre at xAI’s controversial site in Memphis, Tennessee is emitting huge plumes of pollution, according to an environmental watchdog group.
As some of you may know, a new bittorrent tracker/site platform built with Rust/VueJS is in the works. Here is the announcement and a progress report.
When this started, my motivation was high and things went fast. I'm still very motivated to bring arcadia to a production-ready level, but I need at least 1 other "core" dev to work with me. Since this is a community project, I'm not expecting instant replies, daily commits, etc. But a buddy to share the pain and the fun with 😀 we are humans after all, social beings! Some people already made very nice contributions (and I thank you all again!), but it's not the same as having someone who knows the codebase well, can take informed decisions, etc.
So if you are (or know someone who might be) interested in building what could be the next big thing in the torrenting realm, please dm me here or on discord (@FrenchGithubUser) and let's chat! I will happily give more details and assistance for whatever is needed! Also feel free to post on your private tracker forums/irc to let other know about arcadia! I believe that coding with others is paramount for projects of this size!
As a reminder, arcadia is a programming project, aiming at bringing a tool to the community. We are not going to host you typical private tracker (although some might). However, I recently rolled out a demo site for the ones interested in testing/developing arcadia. If you are interested, join the discord server.
Una nuova mostra collettiva sarà esposta a partire da questo sabato e per tutta l’estate al Museo Ugonia: “Connessioni 2” non è solo il titolo dell’esposizione, ma anche la rappresentazione dell’intenzione che i quattro artisti mettono in queste opere. Le suggestioni contenute in questi dipinti lasciano spazio a visioni e forme evocative, in un racconto corale figurativo dove gli oggetti quotidiani costituiscono un varco verso nuove e inesplorate dimensioni. Gli artisti – Antonio Bertoni, Filippo Maestroni, Luca Casadio e Martino Neri – portano i visitatori in un viaggio di “metamorfosi pittoriche”, come le descrive nel suo testo critico Tommaso Ortolani. “Ogni forma, ogni luce, ogni ombra si trasforma sotto lo sguardo e nel dialogo silenzioso tra le tele – continua Ortolani – In un tempo che ha spesso rimosso la pittura figurativa come lingua del presente, questa mostra ne rivendica invece la vitalità e la necessità.”
L’inaugurazione si terrà al Museo sabato 14 giugno alle 18.00, alla presenza degli artisti e delle autorità locali. La mostra sarà visitabile fino al 14 settembre, durante gli orari di apertura del Museo Ugonia: tutti i festivi e prefestivi, ore 10-12 e 16-19.
Una nuova mostra collettiva sarà esposta a partire da questo sabato e per tutta l’estate al Museo Ugonia: “Connessioni 2” non è solo il titolo dell’esposizione, ma anche la rappresentazione dell’intenzione che i quattro artisti mettono in queste oper…
In collaboration with the artist, the installation examines the ideas of creativity and the moral quandary of extending someone’s life beyond their biological death.
I don't know, maybe they think it's fake, I also thought it first, but it isn't, but somewhat creepy, I contrasted it in several sources. Anyway there are always people here in Lemmy which downvote everything, because of this I don't give a fuck on downvotes.
This wasn't "his brain matter", these were "neuronal organoids" (clumps of neurons) grown from harvesting white blood cells and turning those into stem cells. Then the clumps were networked together with a literal wire to conduct signals between them, for timing.
Usually in organoids networks the wire delivers either regular, repeating inputs ("clean" pulses) as a reward for succeeding a task, or a random signal ("noise") for failure; this is how they're "trained" to play Pong for example:
In more advanced closed-loop setups, organoid cultures are embedded within simulated environments that allow them to “interact” in a game-like world. By using high-density multielectrode arrays (MEAs) to deliver patterns of electrical signals, researchers can create closed-loop feedback systems that enable organoids to process and respond to certain inputs (Kagan et al. [2022]). For instance, in one experiment, monolayer neuronal cultures were given sparse sensory feedback about the consequences of their actions within a simulated game. The organoids displayed short-term memory by organizing themselves in goal-directed ways, effectively learning to complete simple behavioural tasks. This capability, made possible by reinforcement learning, allows organoids to adapt based on feedback, akin to how a human brain might learn from trial and error.
These same methods are being used to train organoids as Machine Learning compute substrates, because they're much more efficient than silicon: aapsopen.springeropen.com/arti…
YouTube, the world's largest video platform, appears to have changed its moderation policies to allow more content that violates its own rules to remain online.
YouTube, the world's largest video platform, appears to have changed its moderation policies to allow more content that violates its own rules to remain online.
Google says a new AI tool on its search engine will rejuvenate the internet. Others predict an apocalypse for websites. One thing is clear: the current chapter of online history is careening towards its end. Welcome to the "machine web".
The web is built on a simple bargain – websites let search engines like Google slurp up their content, free of charge, and Google Search sends people to websites in exchange, where they buy things and look at adverts. That's how most sites make money.
An estimated 68% of internet activity starts on search engines and about 90% of searches happen on Google. If the internet is a garden, Google is the Sun that lets the flowers grow.
This arrangement held strong for decades, but a seemingly minor change has some convinced that the system is crumbling. You'll soon see a new AI tool on Google Search. You may find it very useful. But if critics' predictions come true, it will also have seismic consequences for the internet. They paint a picture where quality information could grow scarcer online and large numbers of people might lose their jobs. Optimists say instead this could improve the web's business model and expand opportunities to find great content. But, for better or worse, your digital experiences may never be the same again.
On 20 May 2025, Google's chief executive Sundar Pichai walked on stage at the company's annual developer conference. It's been a year since the launch of AI Overviews, the AI-generated responses you've probably seen at the top of Google Search results. Now, Pichai said, Google is going further. "For those who want an end-to-end AI Search experience, we are introducing an all-new AI Mode," he said. "It's a total reimagining of Search."
You might be sceptical after years of AI hype, but this, for once, is the real deal.
Google says adding more AI to its search engine will rejuvenate the internet. Others predict an apocalypse for websites. One thing is clear: this era of online history is closing.
Google says a new AI tool on its search engine will rejuvenate the internet. Others predict an apocalypse for websites. One thing is clear: the current chapter of online history is careening towards its end. Welcome to the "machine web".
The web is built on a simple bargain – websites let search engines like Google slurp up their content, free of charge, and Google Search sends people to websites in exchange, where they buy things and look at adverts. That's how most sites make money.
An estimated 68% of internet activity starts on search engines and about 90% of searches happen on Google. If the internet is a garden, Google is the Sun that lets the flowers grow.
This arrangement held strong for decades, but a seemingly minor change has some convinced that the system is crumbling. You'll soon see a new AI tool on Google Search. You may find it very useful. But if critics' predictions come true, it will also have seismic consequences for the internet. They paint a picture where quality information could grow scarcer online and large numbers of people might lose their jobs. Optimists say instead this could improve the web's business model and expand opportunities to find great content. But, for better or worse, your digital experiences may never be the same again.
On 20 May 2025, Google's chief executive Sundar Pichai walked on stage at the company's annual developer conference. It's been a year since the launch of AI Overviews, the AI-generated responses you've probably seen at the top of Google Search results. Now, Pichai said, Google is going further. "For those who want an end-to-end AI Search experience, we are introducing an all-new AI Mode," he said. "It's a total reimagining of Search."
You might be sceptical after years of AI hype, but this, for once, is the real deal.
Google says adding more AI to its search engine will rejuvenate the internet. Others predict an apocalypse for websites. One thing is clear: this era of online history is closing.
This applies to any of the microblogging software. Akkoma, IceShrimp, etc. I go to any Lemmy instance, big or small, and the up/downvote data and replies are basically all the same. The same goes for Peertube, and most services that aren't Mastodon and the gang. Why is this? Is it because of older design? Unexpected issues cropping up with scale? It seems to be such a big struggle over there, but for everyone else, it's whatevs.
I would love to permanently reside on a smaller Mastodon instance or host my own, but I often find that many posts are unavailable and a lot of replies I want to reply to don't exist. It is an incredibly frustrating experience.
A causa di quella che sto adesso subendo io, mi è tornata in mente l’esistenza della muta come concetto. Ci sono purtroppo poche mute (da non confondere quindi con le multe, che sono tante), ma tutte di diverse categorie… C’è la muta umana normale, per cui ogni giorno perdiamo nell’aria quantità allucinanti di cellule morte […]
A causa di quella che sto adesso subendo io, mi è tornata in mente l’esistenza della muta come concetto. Ci sono purtroppo poche mute (da non confondere quindi con le multe, che sono tante), ma tutte di diverse categorie… C’è la muta umana normale, per cui ogni giorno perdiamo nell’aria quantità allucinanti di cellule morte di epidermide — che fa assolutamente schifo, perché queste finiscono in giro per casa a contribuire alla formazione della classica polvere, costringendo a spolverare e quindi faticare senza che da questo lavoro scaturisca alcun prodotto — c’è quella dei serpenti, che è elegante perché c’è proprio la pellicola vecchia consumata che si stacca per essere sostituita con la nuova già perfettamente applicata, che poi a sua volta sarà cambiata… …E infine poi, appunto, c’è la muta arsa viva, che io sto subendo solo adesso dopo il famoso incidentino. Se fosse vetro su di un display, questa cosa si chiamerebbe spacc, quindi il livello in questione è alto pregio. A pensarci è buono anche per il semplice fatto che fa molto femcel, rappresentando sostanzialmente in modo immediatamente visibile la disgregazione continua della mia anima, e focalizzando la generale permanente imperfezione del mio corpo su di un particolare punto oggettivamente percepibile. È in ogni caso simpatica però, perché è una via di mezzo tra le altre mute di cui sopra… e infatti fa schifo comunque, perché i compromessi sono sempre un po’ così. Ma purtroppo, se un giorno sono gatto e l’altro ragno, questo è il massimo a cui posso aspirare…
The pay-it-forward approach to covering the cost of college stretches the return on financial aid and can help fill shortages of workers in critical industries.
A wetland habitat which was "almost exclusively a birder reserve" until the Covid-19 pandemic is marking its 30th anniversary.
Kingfishers Bridge, a 300-acre (121-hectare) reserve between Wicken and Stretham, Cambridgeshire, went from having 2,000 visitors a year to 21,000 in 2023.
The dog-friendly reserve now has a car park, cafe, visitor centre and shop, as well as offering regular visitor tours of its rare habitats.
A chiudere la terza e ultima giornata di “Pianeta 2030”-il Festival è stato il ministro dell’Ambiente e della Sicurezza energetica in dialogo con Daniele Manca.
An example of what the AI-generated summary looked like.
Rayquetzalcoatl
in reply to irelephant [he/him]🍭 • • •I knew AI would eventually come for one of the greatest things humans have ever used the internet for, but I'm so disappointed that it has come from within.
I've cancelled my monthly donations. We can't trust the Wikimedia Foundation at all, ever again. Genuinely sickening anti-human sentiment from those freaks.
It is so concerning given that they're entrusted with something so collaborative and so amazing.
irelephant [he/him]🍭 likes this.
irelephant [he/him]🍭
in reply to Rayquetzalcoatl • • •blakestacey
in reply to irelephant [he/him]🍭 • • •irelephant [he/him]🍭
in reply to blakestacey • • •