L’azzardo non è un gioco. Ma gli spot mirano ai giovani, editorialedomani.it/fatti/azza…, , Le società del settore aumentano le spese dedicate alle campagne di marketing, con poche restrizioni. Uno studio però ha evidenziato che la legalità di alcuni contenuti «può essere messa in discussione»
Le società del settore aumentano le spese dedicate alle campagne di marketing, con poche restrizioni. Uno studio però ha evidenziato che la ... Scopri di più!
What if, listen to me, what if, instead, we relocated Palestinians and Gazans... directly on the Blockchain?
"The Trump administration and international partners are discussing proposals to build a 'Riviera of the Middle East' on the rubble of Gaza. One would establish U.S. control and pay Palestinians to leave."
Ambo in the cathedral of Ravenna dedicated by archbishop Agnellus (557-570). An inscription at the top names the bishop and credits him with making the "pyrgum", or "tower". The ambo is decorated with panels with different animals: fish, birds, peacocks, lambs. 📷🇮🇹 flic.kr/p/2pfn2tS#photography
Li o livro do Asimov "O Cair da Noite" por indicação da tag #Acrônica do @quartacapa. Foi um texto curto e legal de ler. Continuarei acompanhando a tag.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
Solo per avvisarvi, se avete o pensate di attivare Curve, quando poi avrete bisogno dell'assistenza, questa è completamente assente o inutile. Ho aperto una richiesta di supporto il 22/8 per un problema di accesso all'app, mi hanno detto che la mia mail non è un loro account e poi sono spariti.
@NOYBeu complained #YouTube #violated the #EU’s #GDPR by not granting users #access to #data stored on them or information about how data is used. Noyb called the authority’s decision a “win” but regretted that it took the regulator “five and a half years”.
Quando a falta de coluna vertebral se soma à falta de decência, emerge um "inusitado" e grotesco cobardolas arrogante, (mais) um impostor a parasitar o serviço público e a denegrir a República, a tentar justificar, com sobranceria, o injustificável: a duplicidade de critérios perante a violação dos direitos humanos e crimes de guerra.
A imagem é uma captura de tela de um artigo do jornal português "Expresso". O título do artigo é "Flotilha para Gaza: Rangel recusa acompanhamento enquanto Espanha garante proteção diplomática". O texto explica que o ministro dos Negócios Estrangeiros português, Rangel, considera inusitado proteger uma flotilha com ajuda humanitária. Em contraste, o Ministério dos Negócios Estrangeiros espanhol garantiu que o país vai dar "toda a proteção diplomática e consular" à flotilha 'Global Sumud', que partirá de Barcelona no domingo. Na parte inferior da imagem, há ícones de redes sociais, incluindo Facebook, Twitter, WhatsApp, e-mail e LinkedIn, sugerindo opções para compartilhar o artigo. Abaixo do texto, há uma foto de um homem de barba e óculos, vestindo um terno, que parece estar falando em um microfone, possivelmente um político ou um porta-voz.
Fornecido por @altbot, gerado localmente e de forma privada usando Ovis2-8B
Débarrassés du président Bachar Al-Assad, les Syriens oscillent entre l’espoir de vivre dans un État de droit et la crainte d’être soumis à un nouvel autoritarisme où la majorité sunnite imposerait sa loi aux minorités religieuses comme les Druzes et les Alaouites. ↓
Fin manœuvrier, le président Ahmed Al-Charaa sait qu’il doit donner des gages de tolérance pour s’assurer le soutien des capitales occidentales.
« Carnets de route dans une Syrie en proie à la rancœur et au doute », par Emmanuel Haddad, dans le numéro de septembre, en kiosques, en ligne et sur notre application mobile. monde-diplomatique.fr/2025/09/…
Débarrassés du président Bachar Al-Assad, les Syriens oscillent entre l’espoir de vivre dans un État de droit et la crainte d’être soumis à un nouvel autoritarisme où la majorité sunnite imposerait sa loi aux minorités religieuses comme les Druzes et…
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
All shot using real figures, lighting and miniature sets. Only digitally added element is the light glow on Kanes helmet headlamp which I digitally illustrated in the rest is all real.
Surveillance tech is not making us safer – it’s putting innocent people at risk. This isn’t public safety. It’s automated injustice. Read more: eff.org/deeplinks/2024/11/huma…
This post was written by Gowri Nayar, an EFF legal intern. Imagine driving to get your nails done with your family and all of a sudden, you are pulled over by police officers for allegedly driving a stolen car.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
I have an issue with Speech to Text in #HomeAssistant and I can't be the only one running into this, but I can't find many references to it in my searches.
I have a simple example. When you ask TTS for something but it understands it wrong and gives you the wrong text.
I ask for "Deadloch" (an Australian TV Show) using American English TTS but it understands "Deadlock".
I am trying to use this for looking up media in Jellyfin, but of course "Deadlock" does not exist so this fails.
I have an automation that does the look up. How can I create a whitelist of sorts that replaces commonly misheard words for the correct one?
I can't seem to find a way to modify the trigger variable in the automation. Is the only option to copy the value into another variable and then use that for the search?
I wanted to do a top If that replaces common misspellings but only if one matches, otherwise the variable stays the same.
@Oggie I used conditions in the automation and added one at the top that if the "heard" text matches the wrong value, it just forces it to play the correct media using the known media ID.
Then it continues and if it can't find the result, responds with "Not found"
And then the last one is one to process a valid media ID.
I use a script that obtains the media ID from Jellyfin using the REST API. So I'm basically going to manually correct any known errors but otherwise it should use the results from the search.
Ok I found a way to do this, didn't have to be this complicated.
Since this is a very specific issue, I just added a condition that if the STT value is "Deadlock" it just automaticlaly plays the media ID that belongs to Deadloch, else it continues using the media ID found with the script.
I got the magazines that came with BASIC programs printed in them, you could pay extra to get a subscription that included a tape with the code so you didn't have to type the whole thing in and risk typos.
That early foray into BASIC was essential for my early involvement in technology, in spite of what Dijkstra said that one time....
I was given a bunch of old Compute!'s Gazettes by an uncle who'd moved onto PCs from his Commodore 64. I did not get the benefit of the tape or disk option unfortunately, but as a result, many of those magazines are bedaubed with felt-tip where I marked my progress whiling away hours typing in those programs.
I learned so much about the Commodore 64 from those magazines.
By the time I got my C64C in the '90s, magazines had long since stopped publishing code listings due to cost. If they'd continued to do so, magazines would have been twice the price, and less than half as many people would have been able to afford them. As it was, the magazines were, by that point, at least partially subsidised by game companies who wanted to get a demo out on the tape or disk.
I'm still annoyed my subscription to one of those magazines ran out the month before the last ever issue. I could probably get one on eBay for a reasonable price, but it's the principle, dammit.
many of those magazines are bedaubed with felt-tip where I marked my progress whiling away hours typing in those programs.
I got into computers in the mid 70s with the advent of the Altair. Reading your comment was like a flashback. I remember you'd finally get through, meticulously typing in all the pages of code. So your cross your fingers and ran it and got an error. But I was hooked. I still have my Altair, Timex/Sinclair, Ti 99 & 994a. I had/have everything imaginable for the Ti. You needed a kitchen table to spread all that out on.
Later on, as you say, demos became a big thing, I loved the demos. I would write just about anyone giving away a demo of something. Game demos would at least let you play one or two levels.
So your cross your fingers and ran it and got an error.
And eventually we learned to understand the programs we were typing in, knowing what those errors meant and how to fix them without looking back at the listing. Magical.
“I would appreciate you taking your father’s U.S. Constitution book, read it, study it, make your own lines underneath it, and get Trump out of office. The man is a dictator.” — a longtime Missouri resident who said he's at risk of losing his family farm. trib.al/37WIMsR
Is there some other setting I'm not aware of that influences these slight over-extrusions in places where the print head is switching directions? In this case it doesn't matter, but in extremely narrow places it tends to almost pile up a little bit.
Pressure Advance and Z-Height are dialed in optimally, can't do sth. about those without either risking bed adhesion (height) or suffering under-extrusion in other places (PA). Also pretty sure the extruder stepper is dialed in properly. #3DPrinting
For small Areas there is small area flow compensation. What you have right there seems a bit like too much flow... I had this too, but since im mostly using a P1P (Bambulab) printer its not there anymore or way less. I will have a look if the other klipper pinter have this more showing.
@Otto_Gloeckner Thanks. 😀 This is an old Anycubic Mega X w/ Klipper and there's a good chance I missed some very specific calibration for this (especially because my other printer, an even older Anycubic i3 Mega, does the very same 😅).
Laser plotters/engravers have a similar effect caused by the deceleration and aceleration of the head when changing directions. You can fix this there by lowering the power output for the laser near the edges of your engraving area.
@Drayventhal I expected it to be solved after the Pressure Advance calibration (which lowers / stops the extruder motor before edges to make sure the nozzle doesn't spit out too much material). Sounds like the equivalent thing to lasers lowering power output.
@Drayventhal Might be, someone mentioned there are additional compensation settings for small areas though. That sounds like a better idea than calibrating one single setting to the very brink of it still working.
If you want stable parts, this is the little overpressure you want to have.
So this is fine.
You can reduce the perimeter/infill overlap percentage in the slicer settings to reduce this, should be around 15% of extrusion width.
And also this effect is where you see if your feed% are right to the (not everytime constant) filament diameter *mid print* to adjust it when needed on the go.
@gafu It's causing problems in narrow sections though, where it piles up so much across multiple layers I can sometimes hear the head rumble over the material. So I need to do something about it.
The overlap should be at 15%, I remember going through that setting. I'll keep investigating.
You can try to get overlap down a bit, maybe 10% in a first step, and slightly reduce overall feedrate by 2 or 3% for critical print objects, but you loose a bit of printing process safety in case of filament diameter tolerances.
I would save these settings in a special slicer profile and only use it for objects with critical pattern.
The additional material at the corners ensure a good bonding between perimeter and top/bottom layers and perimeters and infill, so its a bit more than needed to be shure it will work in the end.
The better your printer runs (no backlash on the x/y axis and precise material dosing/working extrusion path) the more you can get lower with overlap settings
Someone mentioned that there are slicer settings that specifically address the issue in narrow spaces though, I'll go with that first before going with what sounds like overall less reliable settings. Didn't have the time to test that, or even look whether PrusaSlicer has those. mastodon.social/@Otto_Gloeckne…
For small Areas there is small area flow compensation. What you have right there seems a bit like too much flow... I had this too, but since im mostly using a P1P (Bambulab) printer its not there anymore or way less. I will have a look if the other klipper pinter have this more showing.
Maybe iam outdated at this point, the old slic3r which was forked from prusa back in the days doesnt had such compensation, and the firmware related things linke pressure advance cant prevent from "on purpose built in material overload"
So i personally don't know about such thing, if it exists.
Donald Trump ha annunciato su Truth Social un imminente ordine esecutivo per introdurre l’obbligo di un documento di identità alle urne e per abolire quasi del tutto il voto per corrispondenza.
OpenLight, which designs custom application-specific silicon photonic chips, raised a $34M Series A as it targets the data center interconnect market (Dan Swinhoe/DatacenterDynamics)
As I’ve come to understand it, slime molds are delightfully weird. Neither one organism nor many, [non-existent pronoun] exist as a single huge cell but with multiple nuclei, each with a different genome.[Pronoun] has no brain but a good memory and can solve mazes. #slimemold
you don't have to write a novel. just describe your #video or #picture succinctly
for pictures of #text, there's easy quick online tools to turn it into text
it's not just a matter of making mastodon a friendlier place for #disability: sometimes people aren't in a place they can listen, or they have a bad connection, or the media decayed
and some people don't boost posts without alt text, so you lose engagement
youtu.be/zL7klttTsnY America is dying. The rich are stripping the nation for parts while we burn down. We own nothing. Literally the only reason we aren't married is because we'd have to spend $300 more a month for health care, because I have VA which is free and she has low income ACA #healthcare <$100/month. If she lost that I would have to pay $400 through my company for both of us just to ensure she could afford healthcare. If we nationalized all these monopolies that we already currently subsidize at $1T (1/4th the budget) per year. Nationalizing all of these #monopolies would cut literally all of our spending in half at the least if not more, we would be healthier, happier, and live longer. We are in the #enshittification stage of #capitalism to the point that we pay more and more for worse and worse at insane speeds never seen, reaching rent seeking with suppressed innovation on purpose or they can't squeeze out more out of less investment. The only private companies should be ones that have competition. If not, they should be nationalized. At least we get some say with democracy instead of just some rich assholes doing what they want to us at their smallest whim
Several Russian assets have been destroyed in occupied Crimea after the Prymary (Phantoms) special unit from Defence Intelligence of Ukraine struck Russian military infrastructure.
Anthropic will start using user chats transcripts and coding sessions to train its AI models as part of new terms, unless users opt out by September 28, 2025 alternativeto.net/news/2025/8/…
The image shows a pop-up window with a light blue background and a white panel containing text and graphics. The title reads "Updates to Consumer Terms and Policies," indicating changes to the Consumer Terms and Privacy Policy effective on September 28, 2025. The left side of the panel details the changes, including the ability to help improve Claude by allowing the use of your chats and coding sessions to train and improve Anthropic AI models, and the option to change anything in your Exhale settings. It also mentions updates to data retention, extending data retention to 5 years to improve AI models and safety protections. The right side features a simple line drawing of chat bubbles and a document, symbolizing communication and documentation. At the bottom, there are two buttons: "Accept" in a black box and "Not now" in a white box, with a link to learn more and read the Consumer Terms and Privacy Policy.
Provided by @altbot, generated privately and locally using Ovis2-8B
Ein Social Media-Verbot für Minderjährige klingt auf den ersten Blick wie eine einfache Antwort zum Schutz der Jugend. Doch hinter der Debatte stecken rechtliche, technische und gesellschaftliche H…
> Le parole di Greta Thunberg prima di salpare per il suo secondo tentativo di rompere il blocco israeliano su Gaza, unendosi a centinaia di attivisti della Global Sumud Flotilla.
Parlamentspräsidentin Julia Klöckner will über die Plattform junge Menschen erreichen. Die Datenschutzbeauftragte des Bundes warnt vor der App auf Diensthandys.
Profitez des vidéos et de la musique que vous aimez, mettez en ligne des contenus originaux, et partagez-les avec vos amis, vos proches et le monde entier.
Growing up poor, I decided that I never want to live like that again. I bought into the work gospel: work hard to get a degree, get a nice job, be a productive member of society.
Well, that doesn't work for anyone. You get this temporary safety buffered by income and savings. I'm not them anymore, you tell yourself. You buy nice things for the people in your life who can't afford them, but deep down, you know they shouldn't be struggling in the first place.
The deeper you look, the more you see the systemic inequity scream out at you. You put more blinders on. Make yourself feel better through philanthropy.
"What good could I do as one person?", you ask yourself, "I'm not a billionaire. I don't even own my own home. I'm not responsible for their well-being."
In Canada, the tech salaries aren't as inflated as in the US. But then I see my friends living off disability, and friends working low-waged jobs finally feel like they've "made it" at $50k (Canadian)/yr, and it's a shit job. But they can never leave it because they believe that it's the best they can get. And there they are, a decade later, still at the same pay.
The wealth gap is killing us.
You can't rest because you'll be poor. You can't be unemployed because you'll be poor. You can't fight for better working conditions because you'll be fired, then poor.
Nowhere in here did I even mention living. This fear overwhelms every part of our lives, that we're willing to give up more and more of it for money.
When do we live? When do we find peace and belonging in community? When do we find out that poverty can be defeated in community? When do we defeat poverty?
You’ve written wise, experienced and knowledgeable thoughts everyone should consider and share talking with teens before they start what they think is just a job they can leave. But life happens and you could be trapped.
So many people have big dreams and think every choice is just temporary. Then the young adult thinks “oh this $20/hour job is fantastic. But when does reality come in?
My 23-year old granddaughter is moving to a far better home rented with friends. She said “Grandma, my apartment and utilities are taking almost all of my paychecks!” And at the moment she hadn’t thought about her car payments too. And she hasn’t thought past what she would do if her employer closes down her older store she works in.
I sure do get that! And I’m glad she’s had about 7 jobs now in 5 years. Yes, she could try jobs out. But she had backup from her parents. Even now, if she completely lost her job she could move back home. If her car was wrecked her parents would help a little on getting a replacement. How many young adults have that backup? I didn’t and most of my friends didn’t.
I am grateful to have had a great variety of jobs and lived in many places and states. I just never thought I’d spend the next 40 years scrambling to get by.
Superficially, this photo of trees shading a path in Inwood Hill Park, is not too different from the last one I posted. Let's see what alt-text @altbot provides.
The image depicts a serene forest path surrounded by dense greenery. The path is paved and runs through a forested area, flanked by tall trees with lush foliage. The sunlight filters through the canopy, casting dappled shadows on the ground. Fallen leaves and branches are scattered along the path, adding to the natural ambiance. A large tree with a thick trunk stands prominently on the right side of the path, its branches extending outward. The scene is tranquil and inviting, with a sense of depth created by the path leading into the distance.
Provided by @altbot, generated privately and locally using Ovis2-8B
Heartburn relief ≠ risk-free. Long-term PPIs(Prilosec, Prevacid, Protonix, Nexium) tied to kidney disease, fractures, infections, nutrient loss… and cancers (gastric, liver, pancreatic, colorectal). And 25–70% of prescriptions may not be truly needed… #press
Das Bild zeigt eine beeindruckende gotische Kathedrale mit zwei hohen Türmen, die sich majestätisch gegen einen klaren blauen Himmel erhebt. Die Kathedrale ist von einem ummauerten Bereich umgeben, der von Bäumen gesäumt ist. Vor der Kathedrale fließt ein Fluss, dessen Ufer mit Graffiti verziert ist. Im Hintergrund sind weitere Gebäude mit roten Dächern zu sehen. Die Szene ist von einer ruhigen und friedlichen Atmosphäre geprägt, die durch die klare Sonneneinstrahlung und die grünen Bäume verstärkt wird. ― Das Bild zeigt eine beeindruckende gotische Kathedrale mit zwei hohen Türmen, die sich majestätisch über eine Stadt erhebt. Die Kathedrale ist aus Stein gebaut und hat eine komplexe Architektur mit vielen Fenstern und Verzierungen. Vor der Kathedrale fließt ein breiter Fluss, der von einer niedrigen Mauer gesäumt wird, die mit Grünery und Bäumen bedeckt ist. Im Vordergrund des Bildes ist ein ruhiger Flussabschnitt zu sehen, der von einer Gras- und Sträucherbereich begrenzt wird. Der Himmel ist blau mit einigen weißen Wolken, was auf einen sonnigen Tag hinweist. Neben der Kathedrale sind einige kleinere Gebäude zu sehen, darunter ein gelbes Gebäude mit mehreren Fenstern. Die gesamte Szene vermittelt ein Gefühl von Ruhe und historischer Bedeutung.
Bereitgestellt von @altbot, privat und lokal generiert mit Ovis2-8B
Vanochtend vroeg een hevig gefladder in mijn tuin. Ik sloeg er geen acht op. Er zitten zo vaak vogels in de bomen. Na een minuut of 15 liep ik de tuin in en voor m'n neus verorberde een roofvogel een duif. Gelijk m'n camera gepakt, 200mm lens er op en foto's maken maar ... / Early this morning, there was a lot of fluttering in my garden. I didn't pay any attention. Birds are often in the trees. After about 15 minutes, I walked into the garden and a bird of prey devoured a pigeon right in front of me. I immediately grabbed my camera, attached a 200mm lens, and started taking pictures... / Heute früh hörte ich ein lautes Flattern in meinem Garten. Ich achtete nicht darauf. Vögel sitzen oft in den Bäumen. Nach etwa 15 Minuten ging ich in den Garten und ein Raubvogel fraß direkt vor meinen Augen eine Taube. Ich schnappte mir sofort meine Kamera, setzte ein 200-mm-Objektiv auf und begann zu fotografieren...
If Masto had this we wouldn't have spent all weekend blocking hundreds of spam accounts from mastodon.social - AND mastodon.social themselves could have rejected them at source
Pitch I searched MRF/message rewrite and didn’t see this suggested yet. The Pleroma/Akkoma MRF policies allow more control over posts from other instances, including forcing them to mark images sen...
Altbot
in reply to Maria De Agosto • • •A imagem é uma captura de tela de um artigo do jornal português "Expresso". O título do artigo é "Flotilha para Gaza: Rangel recusa acompanhamento enquanto Espanha garante proteção diplomática". O texto explica que o ministro dos Negócios Estrangeiros português, Rangel, considera inusitado proteger uma flotilha com ajuda humanitária. Em contraste, o Ministério dos Negócios Estrangeiros espanhol garantiu que o país vai dar "toda a proteção diplomática e consular" à flotilha 'Global Sumud', que partirá de Barcelona no domingo. Na parte inferior da imagem, há ícones de redes sociais, incluindo Facebook, Twitter, WhatsApp, e-mail e LinkedIn, sugerindo opções para compartilhar o artigo. Abaixo do texto, há uma foto de um homem de barba e óculos, vestindo um terno, que parece estar falando em um microfone, possivelmente um político ou um porta-voz.
Fornecido por @altbot, gerado localmente e de forma privada usando Ovis2-8B
🌱 Energia utilizada: 0.271 Wh