A Second Rare Atari Cabinet 3D Printed
Last year we covered the creation of a 3D-printed full-size replica of an original Computer Space arcade machine, the legendary first glimmer from what would become Atari, one of the most famous names in gaming. The flowing exuberance of glitter-finished fibreglass made these machines instantly recognisable. Not so well known though is that there was a second cabinet in a similar vein from Atari. Space Race is most often seen in a conventional wooden cabinet, but there were a limited number of early examples made in an asymetric angular take on the same fibreglass recipe as Computer Space. They’re super rare, but that hasn’t stopped a replica being made by the same team and documented in a pair of videos by [RMC – The Cave].
Just like the earlier project, a start was made with a 3D model. In this case an owner of a real cabinet was found, who ran off a not-very-good scan with a mobile phone. THis was then used as the basis for a much better model, and the various pieces were printed. Using all manner of reel ends gave the assembled cabinet a coat of many colours look, but after a coat of filler, paint, and then glitter lacquer, you would never know. Electronics come courtesy of modern emulation hardware and a Sony CCTV monitor, and the joysticks were made from a mixture of common hardware and 3D prints Both the videos are below the break, and you’ll now no doubt also want to see the original project..
youtube.com/embed/SONO6LTHuR8?…
youtube.com/embed/aqbQw1s9LOo?…