Tearing Down a Digital Scope from ’78
If you’re a fan of vintage electronics and DIY tinkering, you’ll find this teardown by [Thomas Scherrer] fascinating. In a recent video, he delves into a rare piece of equipment: the Data Lab Transient Recorder DL 901. This device looks like a classic one-channel oscilloscope, complete with all the knobs and settings you’d expect.
The DL 901, made by Data Laboratories Ltd., is a mystery even to [Thomas], who couldn’t find any documentation online. From the DC offset and trigger settings to the sweep time controls, the DL 901 is equipped to handle slow, high-resolution analog-to-digital conversion. The circuitry includes TTL chips and a PMI DAAC 100, a 10-bit digital-to-analog converter. [Thomas] speculates it uses a successive approximation technique for analog-to-digital conversion—a perfect blend of analog finesse and digital processing for its time.
Despite its intriguing features, the DL 901 suffers from a non-responsive analog input system, limiting the teardown to a partial exploration. For those who enjoyed past Hackaday articles on oscilloscope teardowns and analog tech, this one is a treat. Watch the video to see more details and the full process of uncovering this vintage device’s secrets.
youtube.com/embed/EH0JGXbsyd8?…
pratisamlayana reshared this.
Più droni e più economici. La ricetta del Dipartimento della Difesa Usa
@Notizie dall'Italia e dal mondo
[quote]Il Pentagono sta spingendo per ampliare il proprio arsenale di droni economici e monouso, strumenti fondamentali nel conflitto in Ucraina e nelle logiche di attrito che lo caratterizzano da diversi mesi, esplorando il potenziale di produzione di massa offerto dai fornitori commerciali. In una nuova
Notizie dall'Italia e dal mondo reshared this.
3D Printed Hydrofoil Goes From Model Scale To Human Scale With Flight Controller
Hydrofoils have been around for several decades, but watching a craft slice through the water with almost no wake never get old. In the videos after the break, [rctestflight] showcases his ambitious project: transforming a standup paddleboard into a rideable hydrofoil with active stabilization.
Unlike conventional electric hydrofoil boards that depend on rider skill for balance, [rctestflight] aims to create a self-stabilizing system. He began by designing a small-scale model, complete with servo-controlled ailerons and elevators, dual motors for differential thrust, and a dRehmFlight flight controller. A pair of sonar sensors help the flight controller maintain constant height above the water. The wings are completely 3D printed, with integrated hinges for flight control surfaces slots for wiring and control components. It’s better suited for 3D printing than RC aircraft since it’s significantly less sensitive to weight, allowing for more structural reinforcement. The small scale tests were very successful and allowed [rctestflight] to determine that he didn’t need the vertical stabilizer and rudder.
The full-sized version features a scaled up wing, larger servos and motors attached to an 11-foot standup paddleboard — minus its rear end — mounted on commercially available e-foil booms. A foam battery box stores a hefty LiFePO4 battery, while the electronics from the smaller version are repurposed here. Despite only catching glimpses of this larger setup in action at the end of the video, it promises an excitingly smooth lake ride we would certainly like to experience.
We’ve seen several 3D printed hydrofoils around here, but this promised to be the largest successful attempt. Don’t fail us [Daniel].
youtube.com/embed/0eXeOMuBtYo?…
youtube.com/embed/RdVfVoCJZQM?…
Mi Si È Rotto l’iPhone… Anzi 6.000! Condannati dopo aver commesso una truffa da 2,5 milioni di dollari
Due cittadini cinesi sono stati condannati al carcere negli Stati Uniti per frode. Hanno frodato Apple in beni per un valore di 2,5 milioni di dollari scambiando più di 6.000 iPhone contraffatti con quelli veri.
Ricordiamo che lo schema fraudolento si basava sul fatto che Apple offre agli utenti una garanzia di un anno sui nuovi iPhone, consentendo loro di restituire i dispositivi difettosi per una sostituzione gratuita. Inoltre, Apple offre piani assicurativi aggiuntivi per estendere questo periodo di garanzia.
L’azienda offre diversi modi per trasferire iPhone difettosi per la riparazione o la sostituzione. Le opzioni includono la spedizione gratuita del telefono ad Apple tramite UPS, FedEx o DLH, visitando un negozio Apple o recandosi presso un centro di riparazione e assistenza autorizzato.
Tra luglio 2017 e dicembre 2019, Haotian Sun e Pengfei Xue, così come i loro complici Wen Jin Gao e Dian Luo, hanno abusato di questo servizio Apple nel tentativo di scambiare quanti più iPhone falsi possibile con quelli veri.
Pertanto, le forze dell’ordine americane hanno scoperto che i truffatori inviavano dispositivi contraffatti da Hong Kong alle caselle della Commercial Mail Receiving Agency (CMRA) presso le filiali UPS. Inoltre, le scatole sono state aperte utilizzando vere patenti di guida e carte d’identità universitarie.
Sun e Xue hanno poi portato i falsi iPhone con numeri di serie e IMEI falsi ai negozi Apple o ai fornitori autorizzati e in cambio hanno ricevuto nuovi smartphone dall’azienda. Successivamente, i veri dispositivi sono stati rispediti a Hong Kong ad altri partecipanti al programma fraudolento per la successiva vendita.
“Durante questa associazione a delinquere, i membri del gruppo hanno trasferito ad Apple più di 6.000 telefoni contraffatti (in precedenza erano stati segnalati circa 5.000 dispositivi), con conseguenti perdite per oltre 2,5 milioni di dollari”, ha affermato questa settimana il Dipartimento di Giustizia degli Stati Uniti.
Naturalmente l’attività sopra descritta non poteva passare inosservata a lungo e gli ispettori americani hanno arrestato i truffatori già nel dicembre 2019. All’inizio di quest’anno, una giuria ha ritenuto Sun e Xue colpevoli di frode postale e associazione a delinquere finalizzata a commettere frodi postali. È stato poi riferito che ciascuno di loro rischia una pena massima di 20 anni di carcere.
Come è ormai noto, Sun è stata condannata a 57 mesi (quattro anni e sette mesi e mezzo) di prigione e tre anni di supervisione post-rilascio, e Xue ha ricevuto 54 mesi (quattro anni e mezzo) di reclusione e tre anni di reclusione con supervisione post-rilascio. Inoltre, il tribunale li ha condannati a pagare ad Apple 1.072.200 e 397.800 di danni.
L'articolo Mi Si È Rotto l’iPhone… Anzi 6.000! Condannati dopo aver commesso una truffa da 2,5 milioni di dollari proviene da il blog della sicurezza informatica.
Sinistra liberal, il blob che divora la sinistra stessa l Kulturjam
"C’è oggi una sinistra che si autodefinisce liberal progressista che non ha niente a che fare con la propria storia e tradizione. Il suo Occidente non solo non è Marx, e nemmeno è Platone, Spinoza o il cristianesimo ma il mercato e il consumo."
Guerre di Rete - I cercapersone erano l’innesco della guerra
@Informatica (Italy e non Italy 😁)
Cosa sappiamo ancora di quell’evento. Poi leak e giornalismo. E AI.
#GuerreDiRete è la newsletter curata da @Carola Frediani
guerredirete.substack.com/p/gu…
Informatica (Italy e non Italy 😁) reshared this.
2View: The Self-Erasing VHS Tape With Paperclip Hack
The back of the 2View VHS box. The instructions are all in Dutch, as its (sole) launch market. (Credit: Techmoan, YouTube)
Over the decades the video and music industries have tried a wide range of ways to get consumers to buy ‘cheaper’ versions of albums and music, but then limit the playback in some way. Perhaps one of the most fascinating ones is the 2View, as recently featured by [Matt] over at Techmoan on Youtube. This is a VHS tape which works in standard VHS players and offers you all the goodness that VHS offers, like up to 512 lines of PAL video and hard-coded ads and subtitles, but also is restricted to just playing twice. After this second playback and rewinding, the tape self-erases and is blank, leaving you with just an empty VHS tape you can use for your own recordings.
As a form of analog restrictions management (ARM) it’s pretty simple in how it works, with [Matt] taking the now thankfully erased Coyote Ugly tape apart for a demonstration of the inside mechanism. This consists out of effectively just two parts: one plastic, spring-loaded shape that moves against one of the tape spools and follows the amount of tape, meaning minutes watched, and a second arm featuring a permanent magnet that is retained by an inner track inside the first shape until after rewinding twice it is released and ends up against the second spool, erasing the tape until rewound, after which it catches in a neutral position. This then left an erased tape that could be safely recorded on again.
Although cheaper than a comparable VHS tape without this limit, 2View was released in 2001, when in the Netherlands and elsewhere DVDs were demolishing the VHS market. This, combined with the fact that a simple bent paperclip could be stuck inside to retain the erase arm in place to make it a regular VHS tape, meant that it was really a desperate attempt that quickly vanished off the market
youtube.com/embed/iH4UFUdlmSo?…
Tutto su Carmelo Miano, l’hacker che ha rubato documenti a Tim, Telespazio, Guardia di Finanza e ministero della Giustizia
@Informatica (Italy e non Italy 😁)
Accusato di violazione dei sistemi informatici del ministero della Giustizia, della Guardia di Finanza e di altre importanti aziende, il giovane hacker (dipendente di
Informatica (Italy e non Italy 😁) reshared this.
Tutto su Carmelo Miano, l’hacker che ha rubato documenti a Tim, Telespazio, Guardia di Finanza e ministero della Giustizia
@Informatica (Italy e non Italy 😁)
Accusato di violazione dei sistemi informatici del ministero della Giustizia, della Guardia di Finanza e di altre importanti aziende, il giovane hacker (dipendente di
Informatica (Italy e non Italy 😁) reshared this.
Tutto su Carmelo Miano, l’hacker che ha rubato documenti a Tim, Telespazio, Guardia di Finanza e ministero della Giustizia
@Informatica (Italy e non Italy 😁)
Accusato di violazione dei sistemi informatici del ministero della Giustizia, della Guardia di Finanza e di altre importanti aziende, il giovane hacker (dipendente di
Informatica (Italy e non Italy 😁) reshared this.
Tutto su Carmelo Miano, l’hacker che ha rubato documenti a Tim, Telespazio, Guardia di Finanza e ministero della Giustizia
@Informatica (Italy e non Italy 😁)
Accusato di violazione dei sistemi informatici del ministero della Giustizia, della Guardia di Finanza e di altre importanti aziende, il giovane hacker (dipendente di
Informatica (Italy e non Italy 😁) reshared this.
Tutto su Carmelo Miano, l’hacker che ha rubato documenti a Tim, Telespazio, Guardia di Finanza e ministero della Giustizia
@Informatica (Italy e non Italy 😁)
Accusato di violazione dei sistemi informatici del ministero della Giustizia, della Guardia di Finanza e di altre importanti aziende, il giovane hacker (dipendente di
Informatica (Italy e non Italy 😁) reshared this.
Tutto su Carmelo Miano, l’hacker che ha rubato documenti a Tim, Telespazio, Guardia di Finanza e ministero della Giustizia
@Informatica (Italy e non Italy 😁)
Accusato di violazione dei sistemi informatici del ministero della Giustizia, della Guardia di Finanza e di altre importanti aziende, il giovane hacker (dipendente di
Informatica (Italy e non Italy 😁) reshared this.
Automated Pixel Art With Marbles
Marble machines are a fun and challenging reason to do engineering for the sake of engineering. [Engineezy] adds some color to the theme, building a machine to create 16×16 marble images automatically. (Video embedded below.)
The core problem was devising ways to sort, lift, place, and dump marbles in their correct positions without losing their marbles—figuratively and literally. Starting with color detection, [Engineezy] used an RGB color sensor and Euclidian math to determine each marble’s color. After trying several different mechanical sorting mechanisms, he settled on a solenoid and servo-actuated dump tube to drop the marble into the appropriate hopper.
After sorting, he faced challenges with designing a mechanism to transport marbles from the bottom hoppers to the top of the machine. While paddle wheels seemed promising at first, they tended to jam—a problem solved by innovating with Archimedes screws that move marbles up smoothly without clogs. The marbles are pushed into clear tubes on either side of the machine, providing a clear view of their parade to the top.
Perhaps most ingenious is his use of constant-force springs as a flexible funnel to guide the marbles to a moving slider that drops them into the correct column of the display. When a picture is complete, sliding doors open on the bottom of the columns, dumping the marbles into a chain lift which feeds them into the sorting section. Each of the mechanisms has a mirrored version of the other side, so the left and right halves of the display operate independently.
The final product is slow, satisfying and noisy kinetic testament to [Engineezy]’s perseverance through countless iterations and hiccups.
Marble machines can range from minimalist to ultra-complex musical monstrosities, but never fail to tickle our engineering minds.
youtube.com/embed/w1ks0Vy98KI?…
Addio Calore! I Computer del Futuro Funzioneranno con la Luce. Questa è la ricetta Made in Japan
I ricercatori dell’Università di Tokyo hanno creato un nuovo metodo di calcolo ottico che promette di migliorare significativamente la potenza e l’efficienza energetica dei computer rispetto agli attuali dispositivi elettronici. Gli scienziati sono fiduciosi che tali computer potrebbero apparire entro dieci anni.
Il metodo sviluppato si chiama “diffraction shaping” e consente di utilizzare la luce per eseguire calcoli invece dell’elettricità. Ciò non solo aiuta a evitare il calore associato ai dispositivi elettronici tradizionali, ma elimina anche le limitazioni relative alle dimensioni degli elementi informatici. Questo approccio è particolarmente adatto per attività di elaborazione delle immagini e di apprendimento automatico.
La modellazione della diffrazione si basa sulla tecnica del “casting shadow” sviluppata negli anni ’80, ma la migliora notevolmente. A differenza dell’approccio obsoleto, il nuovo metodo utilizza le proprietà delle onde luminose, il che rende gli elementi computazionali più flessibili ed efficienti dal punto di vista spaziale. L’analogia della “stratificazione in Photoshop” descrive il processo di utilizzo di strati di luce per eseguire calcoli.
I ricercatori ritengono che questo metodo possa integrare i sistemi informatici esistenti eseguendo compiti specializzati e contribuire allo sviluppo di tecnologie future come l’informatica quantistica. La capacità di eseguire 16 operazioni logiche di base utilizzando questo metodo è già stata dimostrata.
Sebbene il sistema sia nelle sue fasi iniziali di sviluppo, si prevede che la diffusione commerciale dei computer ottici possa iniziare entro i prossimi dieci anni, aprendo la strada a una nuova generazione di tecnologie informatiche.
Il metodo di fusione per diffrazione è descritto in un articolo pubblicato sulla rivista peer-reviewed Advanced Photonics.
L'articolo Addio Calore! I Computer del Futuro Funzioneranno con la Luce. Questa è la ricetta Made in Japan proviene da il blog della sicurezza informatica.
Google Cambia Tutto: L’Intelligenza Artificiale Rivoluziona la Ricerca Online
Google ha annunciato un importante aggiornamento dei suoi servizi Search e Lens, che cambierà radicalmente l’approccio alla ricerca di informazioni su Internet. D’ora in poi l’intelligenza artificiale avrà un ruolo di primo piano nell’organizzazione dei risultati di ricerca.
I residenti negli Stati Uniti saranno i primi a provare i nuovi prodotti. L’azienda inizierà a introdurre le tecnologie AI con una versione mobile e solo per la ricerca di ricette. Cioè, per ora gli americani potranno avere idee culinarie più accurate e personalizzate – tutto qui. Tuttavia, l’ulteriore diffusione della tecnologia non richiederà sicuramente molto tempo.
Google ha anche presentato un nuovo design per AI Overviews, uno strumento AI che fornisce rapide revisioni su un argomento di ricerca riassumendo i dati provenienti da più risorse. Le sue risposte ora avranno collegamenti diretti alle fonti integrate, rendendo più semplice per gli utenti l’accesso ai siti Web che li interessano. Inoltre, la società inizierà a mostrare pubblicità nei risultati di ricerca AI e nel servizio Lens. Oltre ai soliti link e alle brevi descrizioni, gli utenti vedranno consigli sui prodotti e potranno andare immediatamente, ad esempio, a un negozio online.
Anche il servizio Google Lens, che consente di cercare informazioni utilizzando la fotocamera dello smartphone, ha ricevuto utili miglioramenti. Ora ha la ricerca vocale e la ricerca video. Ad esempio, puoi caricare un video e porre una domanda sugli oggetti che si muovono nell’inquadratura. Questi aggiornamenti di Lens sono ora disponibili in tutto il mondo nell’app Google per Android e iOS.
Il sistema ha anche una nuova funzione… per fare la spesa. Fotografi oggetti di interesse nel mondo fisico e ricevi immediatamente una pagina con le informazioni chiave sul prodotto e un elenco di negozi dove puoi acquistarlo.
Gli utenti Android possono già provare il nuovo strumento Circle to Search, ora disponibile su oltre 150 milioni di dispositivi. Ti consente di riconoscere i brani nei video e in altri contenuti audio durante la navigazione sul Web. Se ascolti una canzone che ti piace in un video di YouTube, puoi semplicemente cerchiare il video sullo schermo per scoprire il nome della traccia.
Google vede l’intelligenza artificiale come un elemento chiave nel futuro del suo motore di ricerca. È ovvio: l’intelligenza artificiale sta diventando parte integrante della ricerca online e dovremo adattarci a questi cambiamenti, che ti piaccia o no.
L'articolo Google Cambia Tutto: L’Intelligenza Artificiale Rivoluziona la Ricerca Online proviene da il blog della sicurezza informatica.
Consegnati a Lerici “gli Oscar del FinTech”, evento sotto l’alto patrocinio del Parlamento europeo
5 ottobre 2024 – La 4ª edizione dei FinTech Awards Italia (Media partner di Red Hot Cyber), appuntamento di rilievo per chi opera nei settori della finanza e della tecnologia, si è tenuto venerdì 4 ottobre 2024 nella splendida cornice di Villa Marigola a Lerici, location gentilmente concessa da Crédit Agricole Italia, dove i protagonisti dell’ecosistema fintech si sono riuniti per celebrare l’innovazione e confrontarsi sulle nuove frontiere della finanza tecnologica.
Questa edizione, ha ricevuto dalla Presidente Roberta Metsola, l’alto patrocinio del Parlamento europeo, un autorevole riconoscimento che sottolinea l’importanza di questo evento a livello nazionale ed europeo, confermandolo uno dei maggiori per la promozione e il riconoscimento dell’industria fintech, anche grazie al sopporto del main sponsor Banca Valsabbina.
Interventi istituzionali di alto profilo
A inaugurare i lavori i videomessaggi dell’On. Federico Freni, sottosegretario di Stato all’Economia e Finanze, e dell’On. Marco Osnato, presidente della Commissione Finanze della Camera dei Deputati. Mentre, l’On. Giulio Centemero, capogruppo in Commissione Finanze, ha dato il via alla tavola rotonda con una discussione approfondita sui temi chiave del settore con esperti legali e professionisti delle maggiori associazioni di categoria.
La cultura artistica incontra la cultura finanziaria
In questa edizione i 250 ospiti presenti hanno potuto ammirare le opere della pittrice genovese Monica Frisone e dello scultore di Carrara Valerio Neri che ha voluto anche omaggiare l’On. Giulio Centemero, con un pregiato bronzo raffigurante un cavallo. L’opera è stata molto gradita e prenderà posto sulla sua scrivania in parlamento.
Riconoscimenti all’eccellenza del FinTech
Nel corso della giornata sono stati consegnati 12 awards ai CEO delle aziende che si sono distinte per il loro contributo innovativo e la capacità di anticipare le tendenze future nel della finanza e della tecnologia. Tra i nomi più rappresentativi: Alberto Dalmasso, CEO di Satispay, una delle tre società italiane considerate unicorno; Paolo Pescetto, Presidente di Redfish Longterm Capital, quotata su Euronex Growd Milan, Parigi e Borsa di Francoforte; Marco Scioli Chairman di Starting Finance, la startup con 1,3 milioni di utenti, che lo scorso luglio ha chiuso il round da 2,5 milioni da parte del Fondo Rilancio Startup gestito da CDP Venture Capital SGR.
Gli altri vincitori sono: Andrea Delfini, CEO Blastness Group Holding; Gabriele Sabbatini, CEO di Hercle; Federico Rastelli, Head of startup Mamacrowd; Dane Marciano, CEO di Affidaty; Roberto Nembrini, Dir. Gen. di Safety Job SB; Luca Sarcina, CEO di Approver SB; Paolo Rigobello, Gen. Manager di Kintana; Paolo Lutti, CEO di Protetto Servizi; Alberto Cavenaghi, CEO di Solidus.
L'articolo Consegnati a Lerici “gli Oscar del FinTech”, evento sotto l’alto patrocinio del Parlamento europeo proviene da il blog della sicurezza informatica.
Why Electric Trains Sound The Way They Do
If you’re a seasoned international rail traveler you will no doubt have become used to the various sounds of electric locomotives and multiple units as they start up. If you know anything about electronics you’ll probably have made the connection between the sounds and their associated motor control schemes, but unless you’re a railway engineer the chances are you’ll still be in the dark about just what’s going on. To throw light on the matter, [Z&F Railways] have a video explaining the various control schemes and the technologies behind them.
It’s made in Scotland, so the featured trains are largely British or in particular Scottish ones, but since the same systems can be found internationally it’s the sounds which matter rather than the trains themselves. Particularly interesting is the explanation of PWM versus pattern mode, the latter being a series of symmetrical pulses at different frequencies to create the same effect as PWM, but without relying on a single switching frequency as PWM does. This allows the controller to more efficiently match its drive to the AC frequency demanded by the motor at a particular speed, and is responsible for the “gear change” sound of many electric trains. We’re particularly taken by the sound of some German and Austrian locomotives (made by our corporate overlords Siemens, by coincidence) that step through the patterns in a musical scale.
Not for the first time we’re left wondering why electric vehicle manufacturers have considered fake internal combustion noises to make their cars sound sporty, when the sound of true electrical power is right there. The video is below the break.
youtube.com/embed/IRJIJPTUXXE?…
Memristors Are Cool, Radiation-resistant Memristors Even Moreso
Space is a challenging environment for semiconductors, but researchers have shown that a specific type of memristor (the hafnium oxide memristor, to be exact) actually reacts quite usefully when exposed to gamma radiation. In fact, it’s even able to leverage this behavior as a way to measure radiation exposure. In essence, it’s able to act as both memory and a sensor.
Being able to resist radiation exposure is highly desirable for space applications. Efficient ways to measure radiation exposure are just as valuable. The hafnium oxide memristor looks like it might be able to do both, but before going into how that works, let’s take a moment for a memristor refresher.
A memristor is essentially two conductive plates between which bridges can be made by applying a voltage to “write” to the device, by which one sets it to a particular resistance. A positive voltage causes bridging to occur between the two ends, lowering the device’s resistance, and a negative voltage reverses the process, increasing the resistance. The exact formulation of a memristor can vary. The memristor was conceived in the 1970s by Leon Chua, and HP Labs created a working one in 2008. An (expensive) 16-pin DIP was first made available in 2015.
A hafnium oxide memristor is a bit different. Normally it would be write-once, meaning a negative voltage does not reset the device, but researchers discovered that exposing it to gamma radiation appears to weaken the bridging, allowing a negative voltage to reset the device as expected. Exposure to radiation also caused a higher voltage to be required to set the memristor; a behavior researchers were able to leverage into using the memristor to measure radiation exposure. Given time, a hafnium oxide memristor exposed to radiation, causing it to require higher-than-normal voltages to be “set”, eventually lost this attribute. After 30 days, the exposed memristors appeared to recover completely from the effects of radiation exposure and no longer required an elevated voltage for writing. This is the behavior the article refers to as “self-healing”.
The research paper has all the details, and it’s interesting to see new things relating to memristors. After all, when it comes to electronic components it’s been quite a long time since we’ve seen something genuinely new.
Quake in 276 KB of RAM
Porting the original DOOM game to various pieces of esoteric hardware is a rite of passage in some software circles. But in the modern world, we can get better performance than the 386 processor required to run DOOM for the cost of a dinner at a nice restaurant, with plenty of other embedded systems blowing these original minimum system requirements out of the water. For a much tougher challenge, a group from Silicon Labs decided to port DOOM’s successor, Quake, to the Arduino Nano Matter Board platform instead even though this platform has some pretty significant limitations for a game as advanced as Quake.
To begin work on the memory problem, the group began with a port of Quake originally designed for Windows, allowing them to use a modern Windows machine to whittle down the memory usage before moving over to hardware. They do have a flash memory module available as well, but there’s a speed penalty with this type of memory. To improve speed they did what any true gamer would do with their system: overclock the processor. Their overclock got them to around 10 frames per second, which is playable but not particularly enjoyable. The further optimizations to improve the fps required a much deeper dive which included generating lookup tables instead of relying on computation, optimizing some of the original C programming, coding some functions in assembly, and only refreshing certain sections of the screen when needed.
As a game, Quake was a dramatic improvement over DOOM allowing for things like real-time 3D rendering, polygonal models instead of sprites, and advancement to 3D allowing for much more intricate level design. As a result, ports of this game tend to rely on much more powerful processors than DOOM ports and this team shows real mastery of their hardware to pull off a build with a system with these limitations. Other Quake ports we’ve seen like this one running on an iPod Classic require a similar level of knowledge of the code and the ability to use assembly language to make optimizations.
Thanks to [Nicola] for the tip!
See the “Pause-and-Attach” Technique for 3D Printing in Action
[3DPrintBunny] is someone who continually explores new techniques and designs in 3D printing, and her latest is one she calls “pause-and-attach”, which she demonstrates by printing a vase design with elements of the design splayed out onto the print bed.The splayed-out elements get peeled up and attached to the print during a pause.
At a key point, the print is paused and one peels up the extended bits, manually attaching them to sockets on the main body of the print. Then the print resumes and seals everything in. The result is something that appears to defy the usual 3D printer constraints, as you can see here.
Pausing a 3D print to insert hardware (like nuts or magnets) is one thing, but we can’t recall seeing anything quite like this approach. It’s a little bit reminiscent of printing foldable structures to avoid supports in that it prints all of its own self-connecting elements, but at the same time it’s very different.
We’ve seen [3DPrintBunny]’s innovative approaches before with intentional stringing used as a design element and like the rest of her work, it’s both highly visual and definitely it’s own thing. You can see the whole process in a video she posted to social media, embedded below.
I tried out another 'pause-and-attach' type print today using some strings. The strings give it extra flexibility and allow me to add a twistpic.twitter.com/gIytsb8NEm
— 3DPrintBunny (@3DPrintBunny) October 3, 2024
Non diciamo chiodate
@Politica interna, europea e internazionale
L'articolo Non diciamo chiodate proviene da Fondazione Luigi Einaudi.
Politica interna, europea e internazionale reshared this.
Introducing the KanaChord Plus Keyboard カナコード・プラス・キーボード
We love to watch your projects grow as much as you do. Really, we’re like proud grandparents around here. So it’s great to see that [Mac Cody] is back with the KanaChord Plus Keyboard, which supports an astounding 6,165 Kanji as well as 6,240 of the most common Japanese words that contain Kanji. This is all in addition to supporting the Kana characters, which make up the rest of Japanese writing (more on that in a minute).
If you need to input Japanese, this is a dream come true. If you’re trying to learn Japanese in the first place, this could be exactly what you need to become fluent.
Input errors are shown with red lighting.
Without getting into it too much, just know that the Japanese writing system is made up of Kanji, which are Chinese characters, Hirigana, and Katakana. The latter two are collectively known as the Kana, and there’s this table that lays out the pairing of vowels and consonants. For [Mac Cody], it was this layout that inspired this chording keyboard that covers all three.
What this keyboard actually does is generate Unicode macros to render Japanese characters using chords — pressing multiple keys at once as you would on a piano. The most obvious improvement aside from the huge gain in characters is the display.
As with the original KanaChord, one of the great features of the KanaChord Plus is that it uses color in order to indicate character type, Kana mode, and even provide error feedback. Another is the slide switch that selects one of three Unicode key sequences in order to support different computer platforms.
But the touchscreen display is the addition where things get really interesting. As Kana are typed, an incremental Input Method Editor (IME) searches the embedded dictionaries to display an ordered list of Japanese words and Kanji that the user can scroll through and select.
Just like the original, the brains of this operation is a Raspberry Pi Pico. [Mac Cody] used an Adafruit NeoKey 5×6 Ortho Snap-Apart keyboard PCB and 30 Cherry MX switches that we choose to believe are blue. Looking toward the future, [Mac Cody] plans to support the Pico 2, and will update GitHub when everything is ready. Again, there’s a ton of detail in the hardware section, so be sure to check that out.
Domani si rientra a Berlino dopo aver passato il weekend lungo a Lipsia.
Occasione: la festa nazionale della riunificazione, il 3/10.
Highlights (per chi non è in pellegrinaggio musicale nei luoghi di Bach): il memoriale ENORME della battaglia di Lipsia, che è una roba che dovrebbe trovarsi nei vocabolari alla voce "monumentale", e il museo dell'arte stampata.
Ci sono presse vecchie 100 anni o più ancora funzionanti e in effetti ancora usate dal museo stesso per stampare i propri poster e altri materiali. Ho avuto il culo di vederne due-tre azionate da un addetto. Meraviglie meccaniche, una complessità intricatissima per fondere sul momento intere frasi, comporre una pagina e stamparne centinaia di copie.
La voglia che mi viene di imparare a fare certe cose è fortissima. 😍
Matteo Zenatti likes this.
Quantum Wars. Al Senato Usa cresce l’interesse verso il rilevamento quantisti
@Notizie dall'Italia e dal mondo
[quote]Le Emerging Disruptive Technologies sono uno dei settori principali in cui si dipana il confronto tra gli Stati Uniti e la Repubblica Popolare Cinese, poiché esse sono potenzialmente in grado di sconvolgere i caratteri della guerra moderna, garantendo così un inestimabile vantaggio all’attore che per
Notizie dall'Italia e dal mondo reshared this.
Where is the End of DIY?
Al and I were talking on the podcast about Dan Maloney’s recent piece on how lead and silver are refined and about the possibility of anyone fully understanding a modern cellphone. This lead to Al wondering at the complexity of the constructed world in which we live: If you think hard enough about anything around you right now, you’d probably be able to recreate about 0% of it again from first principles.
Smelting lead and building a cellphone are two sides of coin, in my mind. The process of getting lead out of galena is simple enough to comprehend, but it’s messy and dangerous in practice. Cellphones, on the other hand, are so monumentally complex that I’d wager that no single person could even describe all of the parts in sufficient detail to reproduce them. That’s why they’re made by companies with hundreds of engineers and decades of experience with the tech – the only way to build a cellphone is to split the complicated task into many subsystems.
Smelting lead is a bad DIY project because it’s simple in principle, but prohibitive in practice. Building a cellphone from the ground up is incomprehensible in principle, but ironically entirely doable in practice if you’re willing to buy into some abstractions.
Indeed, last week we saw a nearly completely open-source build of a simple smartphone, and the secret to making it work is knowing the limits of DIY. The cell modem, for instance, is a black box. It’s an abstract device that you can feed data to and read data from, and it handles the radio parts of the phone that would take forever to design from scratch. But you don’t need to understand its inner workings to use it. Knowing where the limits of DIY are in your project, where you’re willing to accept the abstraction and move on, can be critical to getting it done.
Of course, in an ideal world, you’d want the cell modem to be like smelting lead – something that’s possible to understand in principle but just not worth DIYing in practice. And of course, there are some folks out there who hack on cell modem firmware and others who could do the radio engineering. But despite my strong DIY urges, I’d have to admit that the essential complexity of the module simply makes it worth treating as a black box. It’s very probably the practical limit of DIY.
This article is part of the Hackaday.com newsletter, delivered every seven days for each of the last 200+ weeks. It also includes our favorite articles from the last seven days that you can see on the web version of the newsletter. Want this type of article to hit your inbox every Friday morning? You should sign up!
USB Army Knife: La Nuova Frontiera del Penetration Test Portatile
All’inizio di ottobre 2024 ha avuto luogo il primo rilascio significativo del progetto USB Army Knife versione 1.0 , destinato a tester e specialisti di pentest. Il progetto, sviluppato in JavaScript e C++, è già disponibile su GitHub sotto licenza MIT, che ne consente l’utilizzo e la modifica liberamente.
USB Army Knife è un software universale progettato per funzionare su dispositivi compatti come le schede ESP32-S3. Supporta un’ampia gamma di strumenti di test di sicurezza, inclusa l’emulazione di dispositivi USB e lo sfruttamento delle vulnerabilità del protocollo di rete.
Le caratteristiche principali del progetto includono il supporto BadUSB, l’emulazione del dispositivo di archiviazione, l’emulazione del dispositivo di rete e lo sfruttamento delle vulnerabilità WiFi e Bluetooth utilizzando la libreria ESP32 Marauder. Il progetto include anche un’interfaccia web basata su Bootstrap, che ne semplifica la configurazione e l’utilizzo.
Il dispositivo su cui viene eseguito USB Army Knife può essere implementato su una scheda ESP32-S3 , progettata come un’unità flash USB LilyGo T-Dongle S3.
La scheda è inoltre dotata di un pulsante fisico e di un adattatore SPI, che amplia notevolmente le sue capacità di personalizzazione e utilizzo in vari scenari di test. La memoria interna del dispositivo è di 16 MB, che fornisce risorse sufficienti per lavorare con una varietà di strumenti.
USB Army Knife apre nuove possibilità per testare perimetri di sicurezza e sistemi di rete. I professionisti della sicurezza possono personalizzare il proprio toolkit locale utilizzando questo dispositivo e testare efficacemente i sistemi per individuare le vulnerabilità legate alle tecnologie USB e wireless.
L'articolo USB Army Knife: La Nuova Frontiera del Penetration Test Portatile proviene da il blog della sicurezza informatica.
An Open Source Mirrorless Camera You’d Want To Use
Making a digital camera is a project that appears easy enough, but it’s one whose complexity increases depending on the level to which a designer is prepared to go. At the simplest a Raspberry Pi and camera module can be stuck in a 3D printed case, but in that case, the difficult work of getting the drivers and electronics sorted out has already been done for you.
At the other end of the scale there’s [Wenting Zhang]’s open source mirrorless digital camera project, in which the design and construction of a full-frame CCD digital camera has been taken back to first principles. To understand the scale of this task, this process employs large teams of engineers when a camera company does it, and while it’s taken a few years and the software isn’t perhaps as polished as your Sony or Canon, the fact it’s been done at all is extremely impressive.
Inside is a Kodak full-frame sensor behind the Sony E-mount lens, for which all the complex CCD timing and acquisition circuitry has been implemented. The brains of the show lie in a Xilinx Zynq ARM-and-FPGA in a stack of boards with a power board and the CCD board. The controls and battery are in a grip, and a large display is on the back of the unit.
We featured an earlier version of this project last year, and this version is a much better development with something like the ergonomics, control, and interface you would expect from a modern consumer camera. The screen update is still a little slow and there are doubtless many tweaks to come, but this really feels close to being a camera you’d want to try. There’s an assembly video which we’ve placed below the break, feast your eyes on it.
youtube.com/embed/OkfzjmY9cF8?…
Insomma, gli esempi di finzione burlesca che si possono estrarre dalle pagine dei memorialisti della Resistenza sono infiniti bigarella.wordpress.com/2024/1…
rag. Gustavino Bevilacqua reshared this.
Matteo Zenatti
in reply to floreana • • •floreana
in reply to Matteo Zenatti • •Due cose che ho saltato, ecco.
Matteo Zenatti likes this.