We’re probably all familiar with adding wood dust, hemp and carbon fibers to PLA filament, but there are so many other fillers one could add. During the completely unrelated recent heatwave in Germany, [Stefan] from CNCKitchen decided to give a new type of biodegradable filler type a shot by scooping some freshly dried cow patties off the very picturesque grazing fields near his place. In the resulting video a number of questions are answered about this ‘PooLA’ that nobody was asking, such as whether it makes for a good filler, and whether it smells bad while printing.

Perhaps unsurprisingly to those who have spent any amount of time around large herbivores like cows, cow dung doesn’t smell bad since it’s mostly composed of the grass fibers that are left over after the cow’s multiple stomachs and repeated chewing have done their thing. As [Stefan] and his colleagues thus found out was that printing with PooLA smells like printing with grass.

As for the practical benefits of PooLA, it adds a nice coloring, but like other ‘reinforced’ PLA filaments seems to trade flexibility for stiffness, so that at ratios of cow dung powder between 5 to 20% added to the PLA powder the test parts would break faster. Creating the filament was also a bit of a chore, for reasons that [Stefan] still has to figure out.

That said, aside from the technically unneeded bacterial corpses and other detritus in cow patties, using grass fibers in FDM filament isn’t a crazy idea, and might fit right in there with other fibers.

youtube.com/embed/GmUPN2Nww6Q?…

hackaday.com/2025/07/14/introd…

There was a time when all the cool kids had a 45 RPM record player. [RF Burns] picked up a 1950s-era player from RCA. However, it needed a lot of work. The good news? We get to see the teardown and the result in a two-part video series, which you can see below. If you are looking for the schematic, you’ll have to wait for the second video.

These were made to be cheap, so there were many parts that needed replacement or, at least TLC. The automation of the record changer was all done with an eccentric wheel, which is satisfyingly low-tech. We were surprised that it still seemed to work after everything was cleaned up.

Inside were two active tubes and a rectifier tube to amplify the signal from the needle. A coat of paint made it look great, and a polarized power cord made it safer.

There was also an unamplified version of the player you can see at the end of the second video. All the same things except for the tube amplifier, of course.

If you are too young to have fond memories of 45s, here’s a primer on how records work. The record player we really want is mobile.

youtube.com/embed/dKFLEtAHhk4?…

youtube.com/embed/PORBDf1STtQ?…

hackaday.com/2025/07/14/record…

If you are looking for the perfect instrument to start a biological horror show in our age of AI, you have come to the right place. Researchers at Johns Hopkins University have successfully used AI-guided robotics to perform surgical procedures. So maybe a bit less dystopian, but the possibilities are endless.

Pig parts are used as surrogate human gallbladders to demonstrate cholecystectomies. The skilled surgeon is replaced with a Da Vinci research kit, similarly used in human controlled surgeries.

Researchers used an architecture that uses live imaging and human corrections to input into a high-level language model, which feeds into the controlling low-level model. While there is the option to intervene with human input, the model is trained to and has demonstrated the ability to self-correct. This appears to work fairly well with nothing but minor errors, as shown in an age-restricted YouTube video. (NOTE: SURGICAL IMAGERY WATCH AT YOUR OWN RISK)

It’s noted that the robot performed slower than a traditional surgeon, trading time for precision. As always, when talking about anything medical, it’s not likely we will be seeing it on our own gallbladders anytime soon, but maybe within the next decade. If you want to read more on the specific advancements, check out the paper here.

Medical hacking isn’t always the most appealing for anyone with a weak stomach. For those of us with iron guts make sure to check out this precision tendon tester!

hackaday.com/2025/07/14/do-you…

A man named [Jim Valvano] once said “There are 86,400 seconds in a day. It’s up to you to decide what to do with them.” — while we couldn’t tell you who [Jim Valvano] was without a google search*, his math checks out. The quote was sufficiently inspirational to inspire [danjovic] to create a clock count those seconds precisely.

It’s a simple project, both conceptually and electrically. All it does is keep time and count the seconds in the day– a button press switches between counting down, counting up, and HH:MM:SS. In every mode, though, the number displayed will change at one Hertz, which we appreciate as being in the spirit of the challenge. There are only four components: an Arduino Nano, a DS3231 RTC module, a SSD1306 128×64 OLED module, and a momentary pushbutton. At the moment it appears this project is only on breadboard, which is a shame– we think it deserves to have a fancy enclosure and pride of place on the wall. Wouldn’t you be more productive if you could watch those 86,400 seconds ticking away in real time? We think it would be motivating.

Perhaps it will motivate you to create something for our One Hertz Challenge. Plenty of seconds to go until the deadline on August 19th, after all. If you’d rather while away the time reading, you can check out some of [danjovic]’s other projects, like this Cistertian-inspired clock, or this equally-inscruitable timekeeper that uses binary-coded octal.

*Following a google search, he was an American college basketball coach in the mid-20th century.

hackaday.com/2025/07/14/2025-o…

Il Fairphone 6.

Nella sua confezione minimalista in cartoncino FSC, decorato con inchiostro di soya.

Prenderò un giorno di ferie per prepararmelo come si deve.

😁😁😁

#Fairphone #fairphone6

Negli ultimi mesi la procura ha messo all’amministrazione giudiziaria per motivi simili anche la Manufactures Dior, società italiana controllata dal gruppo francese Dior, la Giorgio Armani Operations, che si occupa dell’ideazione e della produzione di capi di abbigliamento e accessori per il gruppo Armani, la Alviero Martini Spa, l’azienda di moda i cui prodotti sono famosi soprattutto per le mappe disegnate sui tessuti, e la Valentino Bags Lab srl, un’azienda controllata dalla società di moda Valentino che produce borse a suo marchio.

ilpost.it/2025/07/14/loro-pian…

Anche l’azienda di abbigliamento Loro Piana sarà messa in amministrazione giudiziaria per un’indagine sullo sfruttamento dei lavoratori

^{Il Post}