To those of us who live in the civilized lands where ~230 VAC mains is the norm and we can shove a cool 3.5 kW into an electric kettle without so much as a second thought, the mere idea of trying to boil water with 120 VAC and a tepid 1.5 kW brings back traumatic memories of trying to boil water with a 12 VDC kettle while out camping. Naturally, in a fit of nationalistic pride this leads certain North American people like that bloke over at the [Technology Connections] YouTube to insist that this is fine, as he tries to demonstrate how ridiculous 240 VAC kettles are by abusing a North American Level 2 car charger to power a UK-sourced kettle.

Ignoring for a moment that in Europe a ‘Level 1’ charger is already 230 VAC (±10%) and many of us charge EVs at home with three-phase ~440 VAC, this video is an interesting demonstration, both of how to abuse an EV car charger for other applications and how great having hot water for tea that much faster is.

Friendly tea-related transatlantic jabs aside, the socket adapter required to go from the car charger to the UK-style plug is a sight to behold. All which we starts as we learn that Leviton makes a UK-style outlet for US-style junction boxes, due to Gulf States using this combination. This is subsequently wired to the pins of the EV charger connector, after which the tests can commence.

Unsurprisingly, the two US kettles took nearly five minutes to boil the water, while the UK kettle coasted over the finish line at under two minutes, allowing any tea drinker to savor the delightful smells of the brewing process while their US companion still stares forlornly at their American Ingenuity in action.

Beginning to catch the gist of why more power now is better, the two US kettles were then upgraded to a NEMA 6-20 connector, rated for 250 VAC and 20 A, or basically your standard UK ring circuit outlet depending on what fuse you feel bold enough to stick into the appliance’s power plug. This should reduce boiling time to about one minute and potentially not catch on fire in the process.

Both of the kettles barely got a chance to overheat and boiled the water in 55 seconds. Unfortunately only the exposed element kettle survived multiple runs, and both found themselves on an autopsy table as it would seem that these kettles are not designed to heat up so quickly. Clearly a proper fast cup of tea will remain beyond reach of the average North American citizen beyond sketchy hacks or using an old-school kettle.

Meanwhile if you’d like further international power rivalry, don’t forget to look into the world as seen through its power connectors.

youtube.com/embed/INZybkX8tLI?…

hackaday.com/2025/12/01/using-…

Playing the drums requires a lot of practice, but that practice can be incredibly loud. A nice workaround is presented by [PocketBoy], in converting an acoustic kit to electronic operation so you can play with headphones instead.
A sensor installed inside a floor tom.
It might sound like a complicated project, but creating a basic set of electronic drums can actually be quite simple if you’ve already got an acoustic kit. You just need to damp all the drums and cymbals to make them quieter, and then fit all the individual elements with their own piezo sensors. These are basically small discs that can pick up vibrations and turn them into electricity—which can be used to trigger an electronic drum module.

[PocketBoy]’s build started with a PDP New Yorker kit, some mesh heads to dull the snares and toms, and some low-volume cymbals sourced off Amazon. Each drum got a small piezo element, which was soldered to a 6.5mm jack for easy hookup. They’re installed inside the drums on foam squares with a simple bracket system [PocketBoy] whipped up from hardware store parts. A DDrum DDti interface picks up the signals from the piezo elements and sends commands to an attached PC. It’s paired with Ableton 12 Lite, which plays the drum sounds as triggered by the drummer.

[PocketBoy] notes it’s a quick and dirty setup, good for quiet practice but not quite gig-ready. You’d want to probably just run it as a regular acoustic kit in that context, but there’s nothing about the conversion that prevents that. Ultimately, it’s a useful project if you find yourself needing to practice the drums quietly and you don’t have space for a second electric-only kit. There’s lots of other fun you can have with those piezos, too. Video after the break.

@the606queer
How I’m getting away with a drumset in an apartment building! Mesh heads + DIY triggers + Plain wash cloth + Stick Rods + DDTI DDrum Trigger i/o into Ableton. I need a better snare sample but this thing is whisper quiet! #drums #beginner #acoustics #fyp #drumtok

♬ original sound – the606queer

hackaday.com/2025/12/01/quiet-…

I ricercatori di sicurezza hanno scoperto una sofisticata campagna di exploitche sfrutta un servizio privato di test di sicurezza delle applicazioni out-of-band (OAST) ospitato sull’infrastruttura Google Cloud. La campagna prende di mira principalmente i sistemi in Brasile e sfrutta oltre 200 vulnerabilità comuni (CVE).

Metodo di attacco

Gli endpoint OAST in genere aiutano gli aggressori a verificare il successo degli exploit per l’esecuzione di comandi, la falsificazione delle richieste lato server (SSRF) e la deserializzazione. La maggior parte degli aggressori utilizza servizi OAST disponibili pubblicamente come toast.fun e interact.sh, ma gli autori di questa operazione di minaccia gestivano un dominio privato chiamato i-sh.detectors-testing.com.

Il sistema di threat intelligence Canary di VulnCheck ha rilevato circa 1400 tentativi di exploit relativi a questa infrastruttura tra il 12 ottobre e il 14 novembre 2025. Questa insolita configurazione OAST privata la distingue chiaramente dalla tipica attività di scansione.

Infrastruttura

Tutto il traffico di attacco osservato proveniva da indirizzi IP di Google Cloud situati negli Stati Uniti. Gli IP di scansione identificati includono: 34.172.194.72, 35.194.0.176, 34.133.225.171, 34.68.101.3, 34.42.21.27 e 34.16.7.161.

Un host OAST dedicato, 34.136.22.26, esegue il servizio Interactsh sulle porte 80, 443 e 389. L’utilizzo dell’hosting di Google Cloud offre un vantaggio tattico. I difensori raramente bloccano completamente il traffico proveniente da grandi provider di servizi cloud, facilitando l’infiltrazione del traffico di attacco nelle comunicazioni di rete legittime.

Caratteristiche dell’attacco

Sebbene VulnCheck distribuisca Canary a livello globale, questa campagna di attacco ha preso di mira solo i sistemi distribuiti in Brasile. Sebbene i report di AbuseIPDB indichino che lo stesso gruppo di IP degli aggressori sia stato segnalato anche in Serbia e Turchia, i dati di VulnCheck confermano che il suo obiettivo era esclusivamente quello di colpire obiettivi brasiliani.

Gli aggressori hanno combinato template Nuclei con versioni precedenti non più mantenute nel repository ufficiale. Ad esempio, l’attacco ha utilizzato il template obsoleto grafana-file-read. Questo template YAML è stato rimosso dal repository nuclei-templates nell’ottobre 2025.

Ciò suggerisce che gli aggressori potrebbero aver utilizzato strumenti obsoleti o scanner di terze parti.

Payload personalizzato

L’attacco ha utilizzato anche un payload personalizzato. L’aggressore ha esposto una directory aperta sulla porta 9000 contenente un file TouchFile.class modificato, progettato per sfruttare una vulnerabilità in Fastjson 1.2.47.

A differenza della versione standard di Vulhub, questo payload personalizzato poteva eseguire comandi arbitrari e avviare richieste HTTP in base a parametri. Le prove suggeriscono che l’infrastruttura di attacco sia operativa almeno da novembre 2024, dimostrando un’insolita persistenza.

Mentre la maggior parte degli scanner sostituisce rapidamente la propria infrastruttura, questo aggressore ha mantenuto una presenza stabile a lungo termine.

Raccomandazioni di sicurezza

Questo attacco evidenzia come gli aggressori stiano utilizzando strumenti di scansione open source come Nuclei per diffondere payload di exploit su larga scala su Internet.

Sono indifferenti al lasciare tracce, purché riescano a individuare rapidamente obiettivi vulnerabili. Per prevenire minacce così persistenti, le organizzazioni dovrebbero monitorare il traffico di rete alla ricerca di callback OAST insoliti, bloccare gli indirizzi IP dannosi noti e assicurarsi che i sistemi esposti vengano tempestivamente aggiornati.

L'articolo Gli hacker trasformano Google Cloud in un bunker segreto. Scoperta un’operazione shock proviene da Red Hot Cyber.

Asbestos is a nasty old mineral. It’s known for releasing fine, microscopic fibers that can lodge in the body’s tissues and cause deadly disease over a period of decades. Originally prized for its fire resistance and insulating properties, it was widely used in all sorts of building materials. Years after the dangers became clear, many countries eventually banned its use, with strict rules around disposal to protect the public from the risk it poses to health.

Australia is one of the stricter countries when it comes to asbestos, taking great pains to limit its use and its entry into the country. This made it all the more surprising when it became apparent that schools across the nation had been contaminated with loose asbestos material. The culprit was something altogether unexpected, too—in the form of tiny little tubes of colored sand. Authorities have rushed to shut down schools as the media asked the obvious question—how could this be allowed to happen?

Hiding In Plain Sight

Australia takes asbestos very seriously. Typically, asbestos disposal is supposed to occur according to very specific rules. Most state laws generally require that the material must be collected by qualified individuals except in minor cases, and that it must be bagged in multiple layers of plastic prior to disposal to avoid release of dangerous fibers into the environment. The use, sale, and import of asbestos has been outright banned since 2003, and border officials enforce strict checks on any imports deemed a high risk to potentially contain the material.
Colored sand is a popular artistic medium, used regularly by children in schools and households across Australia. Via: ProductSafety.gov.au
Thus, by and large, you would expect that any item you bought in an Australian retailer would be free of asbestos. That seemed to be true, until a recent chance discovery. A laboratory running tests on some new equipment happened to accidentally find asbestos contamination in a sample of colored sand—a product typically marketed for artistic use by children. The manager of the lab happened to mention the finding in a podcast, with the matter eventually reaching New Zealand authorities who then raised the alarm with their Australian counterparts. This led to a investigation by the Australian Competition and Consumer Commission (ACCC), which instituted a national safety recall in short order.

The response from there was swift. At least 450 schools instituted temporary shutdowns due to the presence or suspected presence of the offending material. Some began cleanup efforts in earnest, hiring professional asbestos removalists to deal with the colored sand. In many cases, the sand wasn’t just in sealed packaging—it had been used in countless student artworks or spilled in carpeted classrooms. Meanwhile, parents feared the worst after finding the offending products in their own homes. Cleanup efforts in many schools are ongoing, due in part to the massive spike in demand for the limited asbestos removal services available across the country. Authorities in various states have issued guidelines on how to handle cleanup and proper disposal of any such material found in the workplace.
Over 87 retailers have been involved in a voluntary recall that has seen a wide range of colored sand products pulled from shelves.
At this stage, it’s unclear how asbestos came to contaminate colored sand products sold across the country, though links have been found to a quarry in China. It’s believed that the products in question have been imported into Australia since 2020, but have never faced any testing regarding asbestos content. Different batches have tested positive for both tremolite and chrysotile asbestos, both of which present health risks to the public. However, authorities have thus far stated the health risks of the colored sand are low. “The danger from asbestos comes when there are very, very fine fibres that are released and inhaled by humans,” stated ACCC deputy chair, Catriona Lowe. “We understand from expert advice that the risk of that in relation to these products is low because the asbestos is in effect naturally occurring and hasn’t been ground down as such to release those fibres.”

Investigations are ongoing as to how asbestos-containing material was distributed across the country for years, and often used by children who might inhale or ingest the material during use. The health concerns are obvious, even if the stated risks are low. The obvious reaction is to state that the material should have been tested when first imported, but such a policy would have a lot of caveats. It’s simply not possible to test every item that enters the country for every possible contaminant. At the same time, one could argue that a mined sand product is more likely to contain asbestos than a box of Hot Wheels cars or a crate of Belgian chocolates. A measured guess would say this event will be ruled out as a freak occurrence, with authorities perhaps stepping up random spot checks on these products to try and limit the damage if similar contamination occurs again in future.

Featured image and other sand product images from the Australian government’s recall page.

hackaday.com/2025/12/01/austra…

Nel 2024 in Italia sono state registrate 2.379 nuove diagnosi di HIV e 450 nuovi casi di AIDS. Numeri che si accompagnano ad un fenomeno che continua a preoccuparci: molte di queste diagnosi arrivano tardi. Non per mancanza di attenzione da parte delle persone, ma perché il nostro Paese non garantisce ancora un’informazione chiara, capillare e accessibile sulla salute sessuale, né condizioni che rendano semplice e naturale il ricorso ai test o ai percorsi di prevenzione.

La realtà è che, mentre si parla costantemente di “emergenza educativa”, la politica continua a ignorare ciò che davvero serve a creare consapevolezza: percorsi seri e laici di educazione alle differenze, all’affettività e alla sessualità in tutte le scuole. Le nuove generazioni crescono senza strumenti, senza linguaggi adeguati, senza una cultura che normalizzi la salute sessuale come parte integrante del benessere di tutt*. E così l’HIV resta un fenomeno reale ma poco discusso, confinato ai margini di un dibattito pubblico che spesso preferisce evitarlo. In altre parole, resta tabù, e le persone sierocoinvolte continuano a pagare il prezzo dello stigma.

Nel frattempo, sono le associazioni nei territori a portare avanti il lavoro più importante: costruire informazione, offrire supporto, organizzare test, orientare le persone ai servizi, creare luoghi dove parlare di salute sessuale sia possibile e non eccezionale. La loro presenza sopperisce a un vuoto politico che non dovrebbe esistere.

Come Possibile e Possibile LGBTI+ continuiamo a chiedere che la salute sessuale debba tornare al centro delle politiche pubbliche. Significa introdurre percorsi formativi strutturati nelle scuole e diffondere la cultura della prevenzione come parte della vita quotidiana, non come un gesto coraggioso. Significa garantire l’accesso gratuito ai contraccettivi e ai preservativi per le persone under 30, e rendere davvero accessibile la PrEP, che in molti Paesi europei ha già dimostrato di ridurre drasticamente le nuove diagnosi. E significa investire in campagne di informazione continuative, non iniziative sporadiche legate a una data sul calendario.

Non abbiamo bisogno di retorica né di moralismi. Abbiamo bisogno di una politica che riconosca che la salute è libertà e dignità, che la prevenzione è un diritto e che l’accesso agli strumenti per esercitarlo deve essere semplice e garantito. Il 1° dicembre non è una parentesi: è il promemoria annuale di ciò che dovremmo fare tutto l’anno e che, invece, ancora non facciamo.

Parlare di HIV significa parlare di conoscenza, autodeterminazione, dignità. E soprattutto significa ribadire che nessuna persona deve sentirsi sola o abbandonata.

Gianmarco Capogna

L'articolo Giornata mondiale contro l’AIDS, un invito ad assumerci una responsabilità collettiva proviene da Possibile.

[Slant 3D] has a useful video explaining some thoughtful CAD techniques for designing 3D printed pins that don’t break and the concepts can be extended to similar features.

Sure, one can make pins stronger simply by upping infill density or increasing the number of perimeters, but those depend on having access to the slicer settings. If someone else is printing a part, that part’s designer has no actual control over these things. So how can one ensure sturdier pins without relying on specific print settings? [Slant 3D] covers two approaches.

The first approach includes making a pin thick, making it short (less leverage for stress), and adding a fillet to the sharp corner where the pin meets the rest of the part. Why? Because a rounded corner spreads stress out, compared to a sharp corner.

Microfeatures can ensure increased strength in a way that doesn’t depend on slicer settings.
Those are general best practices, but there’s even more that can be done with microfeatures. These are used to get increased strength as a side effect of how a 3D printer actually works when making a part.

One type of microfeature is to give the pin a bunch of little cutouts, making the cross-section look like a gear instead of a circle. The little cutouts don’t affect how the pin works, but increase the surface area of each layer, making the part stronger.

A denser infill increases strength, too. Again, instead of relying on slicer settings, one can use microfeatures for a similar result. Small slots extending down through the pin (and going into the part itself) don’t affect how the part works, but make the part sturdier. Because of how filament-based 3D printing works, these sorts of features are more or less “free” and don’t rely on specific printer or slicer settings.

[Slant 3D] frequently shares design tips like this, often focused on designing parts that are easier and more reliable to print. For example, while printers are great at generating useful support structures, sometimes it’s better and easier in the long run to just design supports directly into the part.

youtube.com/embed/uMA-Wt-z_BU?…

hackaday.com/2025/12/01/how-to…