Salta al contenuto principale



Mentre N2 ipnotizza il mondo e vende 1000 esemplari, entro 5 anni un robot domestico sarà in ogni casa


Il giovane fondatore cinese Jiang Zheyuan, a soli 27 anni, guida la startup Songyan Dynamics, specializzata in robot umanoidi. Con circa 140 dipendenti, Jiang si occupa personalmente di ogni aspetto dell’azienda, dallo sviluppo tecnologico alla produzione.

Il robot di punta, l’N2, alto 120 cm, si è fatto conoscere al grande pubblico quando, ad aprile, ha conquistato il secondo posto nella mezza maratona di robot di Pechino, trasmessa in diretta in tutta la Cina. Questo risultato, unito al prezzo competitivo di 39.000 yuan (circa 4600 euro), ha alimentato l’immagine dell’azienda come la “Xiaomi della robotica”.

Fondata nel settembre 2023, Songyan Dynamics ha sviluppato un prototipo funzionante di robot umanoide in meno di un mese, attirando rapidamente finanziamenti da investitori privati e dal governo di Pechino. Tuttavia, nei primi mesi l’azienda ha faticato a trovare clienti e ha affrontato una crisi finanziaria, con vendite quasi inesistenti e costi in aumento. La mancanza di un team commerciale e di marketing ha spinto Jiang a concentrare gli sforzi esclusivamente sull’innovazione hardware, puntando su funzionalità spettacolari per catturare l’attenzione del mercato.

La scelta vincente è stata sviluppare la capacità del robot di eseguire salti mortali all’indietro, uno dei movimenti più complessi per un umanoide. A marzo, Songyan Dynamics ha diffuso un video dell’N2 che compiva più backflip consecutivi, dimostrando avanzate capacità di equilibrio e coordinazione. La performance, insieme a un prezzo inferiore della metà rispetto al principale concorrente Unitree, ha dato all’azienda un vantaggio competitivo significativo e un’immediata visibilità.

La partecipazione alla maratona di aprile ha rappresentato una vetrina decisiva per Songyan Dynamics. Per un mese intero, il team ha lavorato senza sosta per migliorare la resistenza dell’N2, consentendogli di completare la gara e consolidare la sua reputazione di robot stabile e affidabile. La competizione ha dimostrato che le prestazioni non erano solo da laboratorio, ma replicabili in contesti impegnativi e reali.

Il successo mediatico e tecnico si è tradotto in un boom commerciale senza precedenti: entro un mese dalla gara, sono arrivati ordini per oltre 1.000 unità. Questo risultato ha trasformato l’azienda, facendole superare rapidamente la fase di difficoltà iniziale e aprendo prospettive di espansione sia sul mercato cinese che internazionale.

Il valore di Songyan Dynamics è cresciuto in modo vertiginoso, passando dai circa 300 milioni di yuan di inizio anno ai 2 miliardi di yuan a giugno. Guardando al futuro, Jiang Zheyuan ha già fissato il prossimo obiettivo: sviluppare un robot per le pulizie domestiche entro cinque anni, puntando a replicare l’impatto mediatico e commerciale ottenuto con l’N2, ma in un settore ad altissimo potenziale di mercato.

L'articolo Mentre N2 ipnotizza il mondo e vende 1000 esemplari, entro 5 anni un robot domestico sarà in ogni casa proviene da il blog della sicurezza informatica.



Liberating a Collapsible Chair from a Single Piece of Wood


A before and after with the plank of wood shown and the resulting chair also shown.

Over on his YouTube channel our hacker [GrandpaAmu] liberates a collapsible chair from a single piece of wood.

With the assistance of an extra pair of hands, but without any power tools in sight, this old master marks up a piece of wood and then cuts a collapsible chair out of it. He uses various types of saw, chisels, a manual drill, and various other hand tools. His workspace is a humble plank with a large clamp attached. At the end he does use a powered hot air gun to heat the finish he uses to coat the final product.

We love videos like this which communicate, record, and capture old know-how. Even in our electrified future with factory-made commodities everywhere, we’re all still gonna appreciate having something portable to sit on. If you’re interested in collapsible furniture you might also be interested in The Ultimate Workstation That Folds Up.

youtube.com/embed/sRjwTCYU4iE?…


hackaday.com/2025/08/15/libera…




ho studiato che pure hitler all'inizio voleva solo esiliare gli ebrei. ma poi nessuno li voleva e così decise di eliminarli. israele in compenso con i palestinesi sono 50 anni che li elimina sistematicamente, è pure avanti nel progetto rispetto a hitler.


Chicopee Police Cams Mapped


Jonathan Gerhardson, a journalist in Western Massachusetts, mapped police-owned cameras in Chicopee using public records requests and some digital sleuthing. He posted an article about his work and his camera map. It is also at his Github. Thanks to Jonathan for contacting us and sharing his work.

We will add his data to Open Street Map and cctv.masspirates.org. If you want to map surveillance cameras in your community, check out our how to guides.


masspirates.org/blog/2025/08/1…



2025 One Hertz Challenge: An Arduino-Based Heart Rate Sensor


How fast does your heart beat? It’s a tough question to answer, because our heart rate changes all the time depending on what we’re doing and how our body is behaving. However, [Ludwin] noted that resting heart rates often settle somewhere near 60 bpm on average. Thus, they entered a heart rate sensor to our 2025 One Hertz Challenge!

The build is based around a Wemos D1 mini, a ESP8266 development board. It’s hooked up to a MAX30102 heart beat sensor, which uses pulse oximetry to determine heart rate with a photosensor and LEDs. Basically, it’s possible to determine the oxygenation of blood by measuring its absorbance of red and infrared wavelengths, usually done by passing light through a finger. Meanwhile, by measuring the change in absorption of light in the finger as blood flows with the beat of the heat, it’s also possible to measure a person’s pulse rate.

The Wemos D1 takes the reading from the MAX30102, and displays it on a small OLED display. It reports heart rate in both beats per minute and in Hertz. if you can happen to get your heartrate to exactly 60 beats per minute, it will be beating at precisely 1 Hertz. Perhaps, then, it’s the person using Ludwin’s build that is actually eligible for the One Hertz Challenge, since they’re the one doing something once per second?

In any case, it shows just how easy it is to pick up biometric data these days. You only need a capable microcontroller and some off-the-shelf sensors, and you’re up and running.

youtube.com/embed/1OFFsdR9g3k?…

2025 Hackaday One Hertz Challenge


hackaday.com/2025/08/15/2025-o…



"Trump, cessate il fuoco oggi o non sarò contento"

ma da 1 a 10 quanto sarà egocentrico trump? ma secondo te, a parte tua moglie (forse), importa a qualcuno la tua felicità?

Unknown parent

friendica (DFRN) - Collegamento all'originale
simona
 — (Livorno)
@zipidog è abbastanza ghiozzo da poter finire pure così. in lui c'è tutta la flemma britannica


Long before modern supply chains, ancient hominins were moving stone across long distances, potentially reshaping what we know about our evolutionary roots.#TheAbstract


A New Discovery Might Have Just Rewritten Human History


🌘
Subscribe to 404 Media to get The Abstract, our newsletter about the most exciting and mind-boggling science news and studies of the week.

For more than a million years, early humans crafted stone tools as part of the Oldowan tradition, which is the oldest sustained tool-making industry in the archaeological record. Now, scientists have discovered that Oldowan tool-makers who lived in Kenya at least 2.6 million years ago transported high-quality raw materials for tools across more than seven miles to processing sites.

The find pushes the recorded timeline of this unique behavior back half-a-million years, at minimum, and reveals that hominins possessed complex cognitive capacities, like forward planning and delayed rewards, earlier than previously known, according to a study published on Friday in Science.

Hominins at this site, called Nyayanga, used their tools to pound and cut foraged plants and scavenged animals, including hippos, to prepare them for consumption. Intriguingly, the identity of the tool-makers remains unknown, and while they may have been early humans, it’s also possible that they could have been close cousins of our own Homo lineage.

“I've always thought that early tool-makers must have had more capabilities than we sometimes give them credit for,” said Emma Finestone, associate curator and the Robert J. and Linnet E. Fritz Endowed Chair of Human Origins at the Cleveland Museum of Natural History, who led the study, in a call with 404 Media.

“I was excited to see that at 2.6 million years ago, hominins were making use of many different resources and moving stones over large distances,” she added.

While many animals craft and transport tools, hominins are unique in their ability to identify and move special materials across long distances, which the team defines as more than three kilometers (or 1.86 miles). This innovation reveals a capacity for forward planning, complex mental maps, and delayed payoff of food consumption.

“What's unique is the amount of effort put into moving resources around a landscape,” said Finestone. “There's several steps involved, and there's also time in between these efforts and the reward. Although you see that to some extent in other animals, humans really separate themselves, especially as we get further and further in evolutionary time, in terms of the complexities of our foraging system."
Nyayanga amphitheater in July 2025. Image: T.W. Plummer, Homa Peninsula Paleoanthropology Project
Previously, the earliest record of this behavior in hominins came from a site called Kanjera South, which is about two million years old. Both sites are on the Homa peninsula, a region dominated by soft rocks that are not durable as tools; this may have prompted early hominins to search elsewhere for high-quality resources, such as quartz, chert, and granite.

Given that long-distance material transport was present at Kanjera South, the discovery of similar behavior at Nyayanga was not completely unexpected—though Finestone and her colleagues were still surprised by the scope and variety of materials these hominins gathered.

“Often, when you're dealing with these really old archeological assemblages, it's dominated by one type of raw material that's coming from a single source, or a few sources that are really nearby,” said Finestone. “Nyayanga has a lot of different raw materials, and they're using a variety of different sources, so that was surprising and exciting to us.”

Finestone and her colleagues have made many discoveries during their decade-long excavation at Nyayanga. The team previously reported that the tool-makers butchered hippopotamus carcasses which were probably scavenged rather than hunted, providing the earliest evidence of hominin consumption of large animals, according to a 2023 study led by Thomas Plummer, a professor of anthropology at Queens College, City University of New York.

That study also reported fossils from Paranthropus, a close hominin cousin of our own Homo genus, which went extinct more than a million years ago. So far, these are the only hominin remains recovered from Nyayanga, raising the possibility that the Oldowan tool-making industry was not limited to our own human lineage.

“It is interesting because Paranthropus is not traditionally thought to be a tool-user,” Finestone said. “There's debate over whether Paranthropus made tools or whether it was only genus Homo that was making Oldowan tools. I don't think that evidence at Nyayanga is definitive that Paranthropus was the tool maker. It's still an open question. But because we found Paranthropus remains at Nyayanga, and we haven't found anything from genus Homo—at least yet—there's definitely reason to consider that Paranthropus might have been manufacturing these tools.”

With luck, the team may uncover more fossils from these ancient hominins that could shed light on their place in the family. Finestone and her colleagues are also working on constraining the age of the Nyayanga artifacts, which could be anywhere from 2.6 million to three million years old.

But for now, the study marks a new milestone in the evolution of Oldowan tools and their makers, which eventually dispersed across Africa and into Europe and Asia before they were succeeded by new traditions (like the one from our story last week about yet another group of ancient tool-makers with an unknown identity).

The stones once used to butcher hippos and pound tubers offer a window into the minds of bygone hominins that pioneered technologies that ultimately made humans who we are today.

“What's really interesting about humans and their ancestors is we're a technologically dependent species,” Finestone said. “We rely on tools. We're obligate tool users. We don't do it opportunistically or occasionally the way that a lot of other animals use tools. It's really become ingrained in our way of life, in our survival, and our foraging strategies across all people and all cultures.”

“What was exciting about this study is that you see this investment in tool technology, and you see tools becoming ingrained in the landscape-scale behaviors of hominins 2.6 million years ago,” she concluded. “We might be seeing the roots of this importance that technology plays in our foraging behaviors and also just the daily rhythms of our life.”

🌘
Subscribe to 404 Media to get The Abstract, our newsletter about the most exciting and mind-boggling science news and studies of the week.




This week, we discuss OSINT for chat groups, Russell Crowe films, and storage problems.#BehindTheBlog


Behind the Blog: Exercises in OSINT and Storage Pains


This is Behind the Blog, where we share our behind-the-scenes thoughts about how a few of our top stories of the week came together. This week, we discuss OSINT for chat groups, Russell Crowe films, and storage problems.

JOSEPH: On Wednesday we recorded a subscribers podcast about the second anniversary of 404 Media. That should hit your feeds next week or so. Towards the end of recording, I went silent for a bit. I said on air sorry about that, a source just sent me an insane tip, or something like that.

That tip led to ICE Adds Random Person to Group Chat, Exposes Details of Manhunt in Real-Time. Definitely read the piece if you haven’t already. It presented an interesting verification challenge. Essentially I was given these screenshots which included phone numbers but I didn’t know exactly who was behind each one. I didn’t know their names, nor their agencies. It sure looked like a conversation involving ICE though, because it included a “Field Operations Worksheet” covered in ICE branding. But I needed to know who was involved. I didn’t think DHS or ICE would help because they are taking multiple days to reply to media requests if they do at all at the moment. So I had to do something else.

Upgrade to continue reading


Become a paid member to get access to all premium content
Upgrade




Gentle Processing Makes Better Rubber That Cracks Less


Rubber! It starts out as a goopy material harvested from special trees, and is then processed into a resilient, flexible material used for innumerable important purposes. In the vast majority of applications, rubber is prized for its elasticity, which eventually goes away with repeated stress cycles, exposure to heat, and time. When a rubber part starts to show cracks, it’s generally time to replace it.

Researchers at Harvard have now found a way to potentially increase rubber’s ability to withstand cracking. The paper, published in Nature Sustainability, outlines how the material can be treated to provide far greater durability and toughness.

Big Flex

Note the differences between a short-chain crosslinked structure, and the longer-chain tanglemer structure with far less crosslinks. The latter is far better at resisting crack formation, since the longer chain can deconcentrate stress over a longer distance, allowing far greater stretch before failure. Credit: research paper
The traditional method of producing rubber products starts with harvesting the natural rubber latex from various types of rubber tree. The trees are tapped to release their milky sap, which is then dried, processed with additives, and shaped into the desired form before heating with sulfur compounds to vulcanize the material. It’s this last step that is key to producing the finished product we know as rubber, as used in products like tires, erasers, and o-rings. The vulcanization process causes the creation of short crosslinked polymer chains in the rubber, which determine the final properties and behavior of the material.

Harvard researchers modified the traditional rubber production process to be gentler. Typical rubber production includes heavy-handed mixing and extruding steps which tend to “masticate” the polymers in the material, turning them into shorter chains. The new, gentler process better preserves the long polymer chains initially present in the raw rubber. When put through the final stages of processing, these longer chains form into a structure referred to as a “tanglemer”, where the tangles of long polymer chains actually outnumber the sparse number of crosslinks between the chains in the structure.
The gentler production method involves drying the latex and additive mixture at room temperature to form a film, before hot-pressing it to form the final tanglemer structure. This process isn’t practical for producing large, thick parts. Credit: research paper
This tanglemer structure is much better at resisting crack formation. “At a crack tip in the tanglemer, stress deconcentrates over a long polymer strand between neighbouring crosslinks,” notes the research paper. “The entanglements function as slip links and do not impede stress deconcentration, thus decoupling modulus and fatigue threshold.” Plus, these long, tangled polymer chains are just generally better at spreading out stress in the material than the shorter crosslinked chains found in traditional vulcanized rubber. With the stress more evenly distributed, the rubber is less likely to crack or fail in any given location. The material is thus far tougher, more durable, and more flexible. These properties hold up even over repeated loading cycles.

youtube.com/embed/UvGIVUFnsjg?…

Overall, the researchers found the material to be four times better at resisting crack growth during repeated stretch cycles. It also proved to be ten times tougher than traditional rubber. However, the new gentler processing method is fussy, and cannot outperform traditional rubber processing in all regards. After all, there’s a reason things are done the way they are in industry. Most notably, it relies on a lot of water evaporation, and it’s not currently viable for thick-wall parts like tires, for example. For thinner rubber parts, though, the mechanical advantages are all there—and this method could prove useful.

Ultimately, don’t expect to see new this ultra-rubber revolutionizing the tire market or glove manufacturing overnight. However, the research highlights an important fact—rubber can be made with significantly improved properties if the longer polymer chains can be preserved during processing, and tangled instead of excessively cross-linked. There may be more fruitful ground to explore to find other ways in which we can improve rubber by giving it a better, more resilient structure.


hackaday.com/2025/08/15/gentle…



Droni in missione potranno decidere in modo autonomo quali uomini uccidere?


Sembra che gli Stati Uniti abbiano già seriamente preso in considerazione il concetto di guerra autonoma. Il jet da combattimento autonomo della DARPA , risulta in grado di combattere senza pilota, non è più considerato una svolta: l’agenzia è passata alla fase successiva di sviluppo, con l’obiettivo di creare sistemi in grado di controllare un gruppo di jet da combattimento in missioni congiunte oltre il raggio visivo.

Il nuovo programma della DARPA, Artificial Intelligence Reinforcements (AIR), si basa sul progetto Air Combat Evolution (ACE) , che ha messo a confronto F-16 dotati di intelligenza artificiale con velivoli con equipaggio in un addestramento “dogfight”. L’obiettivo è aumentare l’autonomia fino al punto in cui tali velivoli possano operare in formazione, coordinandosi su lunghe distanze e in ambienti di combattimento complessi. Il programma fa parte di una più ampia militarizzazione dell’intelligenza artificiale che sta sollevando preoccupazioni sulla sua sicurezza.

Sebbene AIR sia stato avviato più tardi di ACE, il concetto in sé non è nuovo: la prima domanda per il programma è stata pubblicata nel 2022. Questa settimana, la DARPA ha assegnato silenziosamente a Systems & Technology Research (STR) un contratto da 11,3 milioni di dollari nell’ambito della cosiddetta “Opzione Uno“. Come ha spiegato l’agenzia, questa è già la seconda delle due fasi previste del programma, il che indica che il progetto sta procedendo.

All’inizio di AIR, il programma coinvolgeva sei appaltatori, ma nella seconda fase il numero è stato ridotto a quattro. STR è responsabile di una delle due aree tecniche chiave: lo sviluppo di algoritmi che consentiranno l’esecuzione distribuita e autonoma di missioni tattiche in tempo reale in ambienti incerti, in rapida evoluzione e complessi. La seconda area prevede la creazione di modelli rapidi e accurati in grado di tenere conto dell’incertezza e di migliorare automaticamente con l’accumulo di dati.

Secondo la documentazione iniziale, l’AIR dovrebbe utilizzare sistemi di sensori, sistemi di guerra elettronica e armi esistenti. Le fasi di test includeranno simulazioni, quindi test con un essere umano nel circuito di controllo e infine test su un vero velivolo da combattimento senza pilota. Sviluppi simili sono già stati dimostrati: l’esercito statunitense ha creato un sistema robotico in grado di abbattere autonomamente i droni.

Oltre a STR, al progetto hanno partecipato anche Lockheed Martin e BAE Systems , ma la DARPA non ha ancora reso noto chi sarà incluso esattamente nella seconda fase: la selezione dei partecipanti è ancora in corso. I dettagli del lavoro nella prima e nella seconda fase rimangono riservati, ma è noto che la prossima fase durerà circa 30 mesi e coprirà la parte restante del programma.

La questione di quando i piloti saranno effettivamente costretti a cedere il passo all’intelligenza artificiale rimane aperta. E mentre gli sviluppatori stanno testando l’autonomia tattica, i critici non escludono scenari più inaspettati, fino al punto che un giorno un jet da combattimento autonomo decida di abbandonare una missione di combattimento. Gli esperti avvertono che la diffusione dell’IA militare potrebbe rendere il mondo meno sicuro , poiché l’IA commette errori e le conseguenze possono essere fatali . La comunità internazionale sta cercando di sviluppare un patto globale contro l’IA militare .

L'articolo Droni in missione potranno decidere in modo autonomo quali uomini uccidere? proviene da il blog della sicurezza informatica.



certo che la poltrona è di pelle... senza dubbio... la mia pelle che in estate si stacca da me e rimane attaccata alla sedia... pelle umana.



Researchers say this 'robot metabolism' is an early step in giving AI biological style bodies.

Researchers say this x27;robot metabolismx27; is an early step in giving AI biological style bodies.#News

#News #x27


Tech companies spent $1.2 billion on political influence since 2024. It’s paid off.#News
#News


La gioia e la frustrazione di non essere più su Facebook


A metà di Giugno ho informato tutti i miei amici di Facebook che avrei chiuso l'account. Gli ho anche detto che mi avrebbero trovato qui su Friendica, ma fino ad oggi purtroppo non vedo nessuno, a parte @Fabrizio Venerandi che è molto più avanti di me (e di tanti altri) in queste cose.
Io non desisto, anche rinfrancato dal fatto che l'affidabilità di Meta è sempre più in declino.
Mia moglie aveva disattivato il suo account Facebook anni fa e da qualche settimana aveva notato riapparire notifiche via mail. Chiaramente il suo account era stato hackerato.
Per settimane abbiamo provato a riprenderne il controllo e solo oggi ci siamo riusciti. Ore e ore perse dietro questi incompetenti.
In pratica mia moglie ogni 5 giorni, oltre alle usuali notifiche, riceveva un messaggio con un codice numerico per recuperare la password. Questo probabilmente era l'hacker che le impediva in questo modo di attivare la funzione di recupero della password. Infatti quando andava per attivarla, le diceva "Sembra che tu stia usando in modo errato questa funzione andando troppo velocemente. Ti è stato temporaneamente impedito di usarla.". Ma la cosa assurda è che esiste anche un link di Facebook per segnalare che il proprio account è stato hackerato ed utilizzandolo si riceveva la stessa risposta "Sembra che tu stia usando in modo errato questa funzione...", il che è completamente assurdo perché è proprio quello che gli hacker desiderano per impedire che qualcuno possa recuperare il proprio account!
Il tentativo che finalmente è andato in porto è stato quello di cercare di creare un account con la stessa e-mail e nome e a quel punto la funzione di recupero della password con l'invio di un codice si è attivata.
Ora il problema sarà riuscire ad entrare (per capire cosa ha fatto l'hacker) senza inchinarsi a 1) pagare dei soldi per non avere la pubblicità o 2) accettare che i propri dati personali vengano usati per pubblicità personalizzata. Ci siamo quasi e poi anche questo account verrà eliminato!


la questione balneari può essere vista e descritta in molti modi diversi e pure contrapposti. ma quando è l'evidenza dei fatti ci dice che è gestita come una "rendita", dalla quale si cerca ogni anno di spremere sempre di più, e non un'attività economica, legata al territorio e all'economia locale, che non tiene conto del potere di acquisto degli italiani costantemente in decrescita, quando più, quanto meno, diventa comprensibile come diventi un non senso economico. tanto varrebbe annullare tutte le concessioni e trasformare tutto in spiagge libere con servizi extra a pagamento, cosa che peraltro, almeno in teoria, già sarebbero. un governo coraggioso potrebbe sollo fare questo come atto sensato. come minimo andrebbe dichiarato illegale far pagare l'ingresso i controllare gli accessi. è proprio l'attuale modello di business è che è fuori dal tempo, come quasi tutto in italia.


Umsetzung der NIS-2-Richtlinie: Bundestag muss Gesetz zur Cybersicherheit nachbessern


netzpolitik.org/2025/umsetzung…



la cosa assurda è che vedendo trump pare un soggetto talmente assurdo, pare talmente assurdo che possa esistere ed essere apprezzato, che vivo in una specie di limbo di insicurezza totale, in cui a loop mi chiedo se sono impazzita io, se ho una visione distorta del mondo, se mi sfugge una qualche qualità a cui sono ostinatamente cieca. trump è talmente un non senso che non riesco ad accettare che possa esistere senza che io stia dimenticando di considerare qualche ragione logica importante. un qualche problema reale che incredibilmente io non so come riesco a ignorare e che lui sta dimostrando di risolvere efficacemente che possa giustificare tutta questa follia sicuramente solo "apparente". vivo nell'idea che "qualcosa mi sfugga". non può essere così stupida la realtà.

reshared this

in reply to simona

@informapirata @talksina
Ok, cerchiamo di essere seri.
Se si vuole capire di chi si sta facendo gli interessi e come basta leggere “Dall’economia dell’ occupazione all’economia del genocidio” della relatrice speciale sulla situazione dei diritti umani nei territori palestinesi occupati dal 1967.
È un esempio estremo?
È un esempio circoscritto?
No.
Svela interessi, meccanismi e intrecci che ci riguardano e non solo umanamente
in reply to simona

@thatgiga prova a leggere chi è stato veramente,se poi intendi politicamente e intellettualmente decisamente era meglio di quelli attuali,ovvio che si,ma resterà sempre un colluso condannato per associazione mafiosa,condanna non scontata per...prescrizione dei termini,umanità,etica,empatia zero,il vero problema sono gli eredi di chi mi dovrebbe rappresentare sono diventati politicamente amorfi tendenti al nero,che politicamente mi fa schifo #senzanullaapretendere


Nuovo articolo su giardino-punk.it: Anarchismo e modernità politica
giardino-punk.it/anarchismo-e-…
L'anarchismo come politica posmoderna, partendo da un testo di Nathan Jun

Beatrice Sgaravatto reshared this.



Buon #Ferragosto dal #MIM! ☀
Quali libri vi stanno accompagnando in questi mesi estivi?


Sto facendo colazione guardando la messa celebrata dal papa.

Leggono un brano dell'Apocalisse, un testo a cui noi amanti dell'horror e dell'heavy metal dobbiamo moltissimo.




Pirate Candidate Announcement: Blase Henry for AZ’s 17th Legislative District


The United States Pirate Party is excited to announce our first of many candidates for the 2026 election cycle: AZPP Captain Blase Henry shall be running for Arizona’s 17th Legislative District!

Blase has been a rising star within the ranks of the United States Pirate Party, and with this announcement, he is officially the first Pirate we will be backing during the 2026 elections.

If elected, future State Rep. Henry has laid out to us some of the bills he plans on introducing, including but not limited to:

– A digital Bill of Rights for Arizona

– A bill banning ID requirement/age verification laws on the internet, AI or otherwise

– A bill similar to the “Stop Killing Games” initiative of Europe, aiming to protect video game consumers and players

– A bill that prevents internet service providers from sharing your data without your consent and make it so police need a warrant for your data

We are excited to share what will be the first of many Pirate candidates. Some candidates will appear on the ballot as independents, some as members of major parties and some, if they are so fortunate, will have “Pirate” next to their name on the ballot. No matter what it says next to their name on the ballot, we will throw our support behind our Pirate candidates.

NOTE: the US Pirate Party recently endorsed the gubernatorial campaign of Timothy Grady for Ohio. Timothy Grady is an independent candidate but is not officially a Pirate Party candidate. Blase Henry is the first official candidate announced from the US Pirate Party.

To quote Blase Henry himself: “Let’s Hoist the Colours and Join the Pirate Revolution! For if Buying isn’t Ownership, then Piracy isn’t Theft!”

You can visit his campaign website here, or if you’re an AZ resident, you can help get Blase on the ballot here.

Blase Henry, Victory is Arrrs


uspirates.org/pirates-for-blas…

Gazzetta del Cadavere reshared this.


in reply to 𝓘𝓰𝓸𝓻 🏴‍☠️ 🏳️‍🌈 🇮🇹

L'immagine mostra uno schermo di un computer con un desktop che ha uno sfondo blu con forme ondulate. In alto a sinistra, c'è una finestra intitolata "VNC config" con opzioni di configurazione come "Accept clipboard from viewers", "Also set primary selection", "Send clipboard to viewers" e "Send primary selection to viewers", tutte disattivate. In basso, c'è una barra di stato con l'ora "mercoledì 10 settembre 2025 - 19:05" e un pulsante di spegnimento. Sullo schermo, c'è anche un simbolo di un giroscopio bianco.

Fornito da @altbot, generato localmente e privatamente utilizzando Ovis2-8B

🌱 Energia utilizzata: 0.180 Wh



Riepilogo del mio viaggio nel nord della Germania


Ecco i post su Mastodon con le tappe del mio viaggio di quest'estate in Mecklenburg-Vorpommern e Schleswig-Holstein (aprire sempre le didascalie/testi alternativi delle immagini per qualche particolare in più)

Ulm

Schloss Ulrichshusen (concerto)

Ankershagen (museo Schliemann)

Greifswald, Boddenlandschaft (museo Caspar David Friedrich)

Stralsund (fabbrica di carte da gioco)

Wismar, Schwerin

Lubecca

Marne (concerto)

Amburgo (Kunsthalle) - somiglianze?

Stade (Kunstautomat)

Celle

Bergen-Belsen

Hildesheim

Lipsia (itinerario musicale, San Nicola)

Norimberga

Ritratto di gatta viaggiatrice


Destinazione: Germania settentrionale. Prima tappa: Ulm con il suo incredibile Münster, il Rathaus decoratissimo e il suo cielo plumbeo e piovoso.


The texts were sent to a group called “Mass Text” and show ICE using DMV and license plate reader data in an attempt to find their target, copies of the messages obtained by 404 Media show.#News


ICE Adds Random Person to Group Chat, Exposes Details of Manhunt in Real-Time


Members of a law enforcement group chat including Immigration and Customs Enforcement (ICE) and other agencies inadvertently added a random person to the group called “Mass Text” where they exposed highly sensitive information about an active search for a convicted attempted murderer seemingly marked for deportation, 404 Media has learned.

The texts included an unredacted ICE “Field Operations Worksheet” that includes detailed information about the target they were looking for, and the texts showed ICE pulling data from a DMV and license plate readers (LPRs), according to screenshots of the chat obtained and verified by 404 Media. The person accidentally added to the group chat is not a law enforcement official or associated with the investigation in any way, and said they were added to it weeks ago and initially thought it was a series of spam messages.

The incident is a significant data breach and operational security failure for ICE, which has ramped up arrest efforts across the U.S. as part of the Trump administration’s mass deportation efforts. The breach also has startling similarities to so-called Signal Gate, in which a senior administration official added the editor-in-chief of The Atlantic to a group chat that contained likely classified information. These new ICE messages were MMS, or Multimedia Messaging Service messages, meaning they weren’t end-to-end encrypted, like texts sent over Signal or WhatsApp are.

This post is for subscribers only


Become a member to get access to all content
Subscribe now


#News


Join Our Leadership Team — Apply to Be a Team Lead for the European Pirates!


We’re building something big — a European umbrella organisation working to support our pirate parties across Europe and amplify our shared political voice. Our movement is rooted in collaboration, grassroots empowerment, and making real impact at the EU level. To make this happen, we’re looking for motivated, reliable, and passionate people to take on Team Lead roles in our volunteer-run European secretariat.

As a Team Lead, you will:

  • Coordinate the work of your team and help shape its priorities
  • Collaborate closely with other team leads in the Management Team
  • Support volunteers, delegate tasks, and ensure smooth internal communication
  • Help develop the strategy and direction of our European-level work

We are currently seeking Team Leads for the following teams:

  • Communications Team
  • Community & Outreach Team
  • IT Team
  • Policy Team
  • Operations Team

👉 You don’t need to be an expert or have years of experience — we value commitment, collaboration, and curiosity. We’re especially excited to hear from people with lived experience in grassroots activism, digital tools, or cross-border collaboration.

⏳ Time commitment: Flexible and part-time (volunteer-based). We expect most leads to dedicate around 4–6 hours per week, depending on availability.

🌍 Location: Remote / anywhere in Europe

Interested in helping build a stronger, more connected European movement?
📩Apply now or reach out with questions — we’d love to hear from you!
The post Join Our Leadership Team — Apply to Be a Team Lead for the European Pirates! first appeared on European Pirate Party.




John Lennon & Yoko Ono annunciata l’uscita del box Power To The People
freezonemagazine.com/news/john…
Esce il 10 ottobre il Box deluxe composto di nove CD + tre Blue-Ray più un libro di oltre duecento pagine dedicato a John Lennon e Yoko Ono. 31 brani live tratti dai due storici concerti di John e Yoko al One To One Concert, accompagnati dalla Plastic Ono Band, dagli Elephant’s Memory e da […]
L'articolo John Lennon &


Ucraina, l’Europa supera gli Usa e diventa il maggior fornitore di aiuti militari a Kyiv

@Notizie dall'Italia e dal mondo

Per la prima volta dall’inizio della guerra in Ucraina, l’Europa ha superato gli Stati Uniti nella produzione e nella fornitura di materiale militare a Kyiv. Lo dicono i numeri diffusi dal Kiel Institute for the World Economy: tra febbraio 2022 e giugno 2025, la produzione militare europea



Golden Dome, ecco come funzionerà lo scudo spaziale di Trump. I dettagli

@Notizie dall'Italia e dal mondo

Il Dipartimento della Difesa degli Stati Uniti ha deciso di alzare il velo sull’architettura operativa del Golden Dome, il futuro sistema di difesa missilistica destinato a proteggere l’intero territorio statunitense – Alaska e Hawaii inclusi – contro le minacce balistiche,



il concerto di Gastone Pietrucci e la Macina con Elisa Ridolfi - 13 agosto 2025


Il concerto di Gastone Pietrucci e La Macina insieme a Elisa Ridolfi, vincitrice del Premio Tenco 2024 per la migliore opera prima, si è rivelato un'esperienza suggestiva e toccante. Il luogo prescelto, una radura a pochi metri dal borgo medievale di Cerreto di Montegiorgio, ha donato all'evento un'atmosfera intima e quasi magica. Seduti su semplici assi di legno grezzo, ci siamo ritrovati a stretto contatto con i musicisti, annullando ogni barriera e favorendo una vera e propria comunione tra artisti e ascoltatori.
Nonostante la qualità del suono non fosse sempre eccelsa, quasi a voler dimostrare che quello che conta è la sincerità e non la perfezione artificiale, l'espressività dei musicisti ha superato ogni limite tecnico. Le emozioni scaturite da ogni nota e da ogni parola sono state così coinvolgenti da rendere l'esperienza unica e indimenticabile.
L'esibizione ha offerto un viaggio musicale che ha saputo unire brani originali ad omaggi ad alcuni dei più grandi cantautori italiani: le canzoni di De André, Ciampi, Tenco e Piero Cesanelli (padre della rassegna musicale Musicultura) sono state reinterpretate con passione e rispetto. Momenti di rara intensità si sono raggiunti con le esecuzioni appassionate di "Vedrai, vedrai" di Luigi Tenco e del canto popolare "Sotto la croce Maria", così come con la sorprendente interpretazione della “Ballata degli impiccati” di De André, che è stata introdotta dalla voce nuda e dirompente di Elisa Ridolfi.
Questi passaggi hanno trasformato la serata da un semplice concerto in un'esperienza quasi spirituale di condivisione di sentimenti e storie, confermando ancora una volta il valore di una musica che affonda le radici nella tradizione, ma che sa parlare con forza e attualità al cuore di chi ascolta.
(13agosto2025 - #worldland festival)

Giacomo Franca reshared this.



Il missile nucleare che inquina l’Artico. Putin testa il Burevestnik alla vigilia dei colloqui con Trump

@Notizie dall'Italia e dal mondo

Dal 7 al 12 agosto, le autorità russe hanno chiuso lo spazio aereo per 500 chilometri lungo la costa occidentale di Novaya Zemlya. Almeno quattro navi di supporto hanno raggiunto posizioni di osservazione nel Mare di Barents, mentre due velivoli della Rosatom



Passo qualche giorno da una mia zia 85enne a cui sono molto affezionato, lo faccio un paio di volte l'anno, per ferragosto e per l'ultimo dell'anno.

Da 5 anni io la televisione l'accendo solo per guardare Netflix, la TV vera e propria la guardo solo qui da mia zia, dove è accesa dalla mattina alla sera.

Ecco... io credo che per capire meglio questo paese, e come sia finito così in basso, non si possa prescindere dal riflettere su quello che passa in TV.




Recensione : Wojtek Mazowleski Quintet – Live Spirit I


Con Live Spirit I, il Wojtek Mazolewski Quintet firma il suo primo album dal vivo: un viaggio sonoro tra jazz spirituale e momenti di estasi collettiva, che celebra la libertà compositiva del suo leader.

iyezine.com/wojtek-mazowleski-…

@Musica Agorà