Salta al contenuto principale



The move comes after intense pressure from lawmakers and 404 Media’s months-long reporting about the airline industry's data selling practices.

The move comes after intense pressure from lawmakers and 404 Media’s months-long reporting about the airline industryx27;s data selling practices.#Impact


Airlines Will Shut Down Program That Sold Your Flights Records to Government


Airlines Reporting Corporation (ARC), a data broker owned by the U.S.’s major airlines, will shut down a program in which it sold access to hundreds of millions of flight records to the government and let agencies track peoples’ movements without a warrant, according to a letter from ARC shared with 404 Media.

ARC says it informed lawmakers and customers about the decision earlier this month. The move comes after intense pressure from lawmakers and 404 Media’s months-long reporting about ARC’s data selling practices. The news also comes after 404 Media reported on Tuesday that the IRS had searched the massive database of Americans flight data without a warrant.

“As part of ARC’s programmatic review of its commercial portfolio, we have previously determined that TIP is no longer aligned with ARC’s core goals of serving the travel industry,” the letter, written by ARC President and CEO Lauri Reishus, reads. TIP is the Travel Intelligence Program. As part of that, ARC sold access to a massive database of peoples’ flights, showing who travelled where, and when, and what credit card they used.
The ARC letter.
“All TIP customers, including the government agencies referenced in your letter, were notified on November 12, 2025, that TIP is sunsetting this year,” Reishus continued. Reishus was responding to a letter sent to airline executives earlier on Tuesday by Senator Ron Wyden, Congressman Andy Biggs, Chair of the Congressional Hispanic Caucus Adriano Espaillat, and Senator Cynthia Lummis. That letter revealed the IRS’s warrantless use of ARC’s data and urged the airlines to stop the ARC program. ARC says it notified Espaillat's office on November 14.

ARC is co-owned by United, American, Delta, Southwest, JetBlue, Alaska, Lufthansa, Air France, and Air Canada. The data broker acts as a bridge between airlines and travel agencies. Whenever someone books a flight through one of more than 12,800 travel agencies, such as Expedia, Kayak, or Priceline, ARC receives information about that booking. It then packages much of that data and sells it to the government, which can search it by name, credit card, and more. 404 Media has reported that ARC’s customers include the FBI, multiple components of the Department of Homeland Security, ATF, the SEC, TSA, and the State Department.

Espaillat told 404 Media in a statement “this is what we do. This is how we’re fighting back. Other industry groups in the private sector should follow suit. They should not be in cahoots with ICE, especially in ways may be illegal.”

Wyden said in a statement “it shouldn't have taken pressure from Congress for the airlines to finally shut down the sale of their customers’ travel data to government agencies by ARC, but better late than never. I hope other industries will see that selling off their customers' data to the government and anyone with a checkbook is bad for business and follow suit.”

“Because ARC only has data on tickets booked through travel agencies, government agencies seeking information about Americans who book tickets directly with an airline must issue a subpoena or obtain a court order to obtain those records. But ARC’s data sales still enable government agencies to search through a database containing 50% of all tickets booked without seeking approval from a judge,” the letter from the lawmakers reads.

Update: this piece has been updated to include statements from CHC Chair Espaillat and Senator Wyden.




A bipartisan letter reveals the IRS searched a database of hundreds of millions of travel records without first conducting a legal review. Airlines like Delta, United, American, and Southwest are selling these records to the government through a co-owned data broker.#arc #Privacy


IRS Accessed Massive Database of Americans Flights Without a Warrant


The IRS accessed a database of hundreds of millions of travel records, which show when and where a specific person flew and the credit card they used, without obtaining a warrant, according to a letter signed by a bipartisan group of lawmakers and shared with 404 Media. The country’s major airlines, including Delta, United Airlines, American Airlines, and Southwest, funnel customer records to a data broker they co-own called the Airlines Reporting Corporation (ARC), which then sells access to peoples’ travel data to government agencies.

The IRS case in the letter is the clearest example yet of how agencies are searching the massive trove of travel data without a search warrant, court order, or similar legal mechanism. Instead, because the data is being sold commercially, agencies are able to simply buy access. In the letter addressed to nine major airlines, the lawmakers urge them to shut down the data selling program. Update: after this piece was published, ARC said it already planned to shut down the program. You can read more here.

This post is for subscribers only


Become a member to get access to all content
Subscribe now




Cloudflare va giù nel magnifico Cloud! incidente globale in fase di risoluzione


18 novembre 2025 – Dopo ore di malfunzionamenti diffusi, l’incidente che ha colpito la rete globale di Cloudflare sembra finalmente vicino alla risoluzione. L’azienda ha comunicato di aver implementato una correzione e di essere ora nella fase di monitoraggio attivo, dopo una giornata caratterizzata da disservizi, errori intermittenti e problemi sui servizi applicativi e di sicurezza.

L’incidente, iniziato alle 11:48 UTC, ha coinvolto varie componenti dell’infrastruttura Cloudflare, generando rallentamenti, timeout e blocchi a livello globale, con impatti anche su CDN, API, autenticazione e dashboard di gestione.

Di seguito la ricostruzione completa della giornata.

Timeline dell’incidente Cloudflare


11:48 UTC – Inizio dell’incidente
Cloudflare segnala un degrado interno del servizio. Diversi servizi risultano instabili a livello globale e viene avviata l’analisi del problema.

12:03 UTC – Indagine in corso
Cloudflare conferma che alcuni servizi continuano a essere colpiti da errori intermittenti.

12:21 UTC – Prime evidenze di ripristino parziale
Cloudflare osserva miglioramenti, ma i clienti sperimentano ancora errori più elevati del normale.

12:37 UTC – Indagine ancora attiva
Persistono anomalie diffuse sulla rete.

12:53 UTC – Indagine ancora in corso
I tecnici continuano a lavorare senza individuare ancora una soluzione definitiva.

13:04 UTC – Disattivato temporaneamente l’accesso WARP a Londra
Durante i tentativi di mitigazione, Cloudflare disattiva WARP nella region di Londra. Gli utenti locali non riescono a connettersi tramite il servizio.

13:09 UTC – Problema identificato
Cloudflare comunica di aver individuato la causa dell’incidente e di aver iniziato a implementare una soluzione.

13:13 UTC – Ripristino parziale di Access e WARP
Cloudflare ripristina Access e WARP, riportando i livelli di errore alla normalità.
WARP Londra torna operativo. Si continua a lavorare sui restanti servizi applicativi.

13:35 UTC – Problemi ancora presenti
I servizi applicativi non sono ancora stati ripristinati completamente.

13:58 UTC – Lavori in corso
Continuano gli interventi per riportare online i servizi rimanenti.

14:22 UTC – Ripristino dashboard
La dashboard Cloudflare torna operativa, anche se i servizi applicativi mostrano ancora instabilità.

14:34 UTC – Continuano i lavori di ripristino
Il team tecnico prosegue con le attività necessarie a ripristinare tutti i servizi.

14:42 UTC – Cloudflare: “Incidente risolto, monitoraggio in corso”
Cloudflare annuncia di aver implementato una correzione definitiva. Tutti i servizi dovrebbero tornare progressivamente alla normalità, ma rimane attivo il monitoraggio post-incident.

Impatti dell’incidente


L’incidente ha avuto un impatto rilevante su scala globale. Molti siti web serviti da Cloudflare (tra cui redhotcyber.com) hanno mostrato rallentamenti, pagine non raggiungibili, errori 502, 522 e 526, oltre a problemi di caching e routing.

I servizi di sicurezza e autenticazione, come Cloudflare Access e WARP, sono stati fortemente colpiti nella prima fase. In alcune regioni gli utenti non hanno potuto autenticarsi o accedere alle risorse protette.

Anche Downdetector ha mostrato malfunzionamenti, rendendo difficile monitorare l’ampiezza dell’incidente e contribuendo alla percezione di un blackout molto esteso.

L’infrastruttura globale Cloudflare ha registrato rallentamenti e instabilità, con ripercussioni a catena su servizi non direttamente ospitati sulla piattaforma.

Che cos’è Cloudflare WARP


Cloudflare WARP è un servizio sviluppato da Cloudflare con l’obiettivo di migliorare la sicurezza e le prestazioni della connessione Internet degli utenti. A differenza delle VPN tradizionali, che puntano principalmente a fornire anonimato instradando tutto il traffico attraverso server remoti, WARP è progettato per rendere la navigazione più veloce, stabile e protetta, senza appesantire la connessione.

Come funziona


WARP utilizza il protocollo WireGuard, noto per essere leggero, rapido e altamente sicuro. Il traffico viene instradato attraverso la rete globale di Cloudflare, che funge da “strato protettivo” tra l’utente e il web. Questo permette di:

  • criptare le connessioni su reti non sicure (come Wi-Fi pubblici),
  • ridurre la latenza grazie alla rete globale Cloudflare,
  • filtrare automaticamente traffico malevolo o sospetto,
  • proteggere da intercettazioni e attacchi man-in-the-middle.

Non mira all’anonimato totale come una VPN classica, ma si concentra su sicurezza e stabilità della connessione.

La differenza tra WARP e WARP+


Cloudflare offre due versioni del servizio:

  • WARP: gratuito, utilizza la rete standard Cloudflare.
  • WARP+: a pagamento, instrada parte del traffico tramite la tecnologia Argo Smart Routing, che sceglie dinamicamente il percorso più veloce tra i server Cloudflare, migliorando ulteriormente la velocità.


Situazione attuale


Secondo l’ultimo aggiornamento, la correzione è stata applicata con successo e i servizi stanno tornando alla normalità. Cloudflare è ora nella fase di monitoraggio attivo e nelle prossime ore potrebbero verificarsi residui di instabilità durante l’assestamento della rete

L'articolo Cloudflare va giù nel magnifico Cloud! incidente globale in fase di risoluzione proviene da Red Hot Cyber.



“The more I listened to it, the more I’m like, something doesn’t sound right,” a person who was briefed on the pilot plans told 404 Media.#ICE #bountyhunters


Contractor Paying Random People $300 to Physically Track Immigrants for ICE


A current pilot project aims to pay former law enforcement and military officers to physically track immigrants and verify their addresses to give to ICE for $300 each. There is no indication that the pilot involves licensed private investigators, and appears to be open to people who are now essentially members of the general public, 404 Media has learned.

The pilot is a dramatic, and potentially dangerous, escalation in the Trump administration’s mass deportation campaign. People without any official role in government would be tasked with tracking down targets for ICE. It appears to be part of ICE’s broader plan to use bounty hunters or skip tracers to confirm immigrant’s addresses through data and physical surveillance. Some potential candidates for the pilot were recruited on LinkedIn and were told they would be given vehicles to monitor the targets.

This post is for subscribers only


Become a member to get access to all content
Subscribe now





Humane Mousetrap Lets You Know It’s Caught Something


“Build a better mousetrap and the world will beat a path to your door,” so goes the saying, but VHS beat Betamax and the world hasn’t been the same since. In any case, you might not get rich building a better mousetrap, but you can certainly create something more humane than the ol’ spring’n’snap, as [nightcustard] demonstrates.

The concept is the same as many humane mousetraps on the market. The mouse is lured into a confined cavity with the use of bait, and once inside, a door closes to keep the mouse inside without injuring it. [nightcustard] achieved this by building a plastic enclosure with plenty of air holes, which is fitted with a spring-loaded door. When a mouse walks through an infra-red break beam sensor, a Raspberry Pi Pico W triggers a solenoid which releases the door, trapping the mouse inside. This design was chosen over a passive mechanical solution, because [nightcustard] noted that mice in the attic were avoiding other humane traps with obvious mechanical trigger mechanisms.

As a bonus, the wireless connectivity of the Pi Pico W allows the trap to send a notification via email when it has fired. Thus, you can wake up in the morning and check your emails to see if you need to go and release a poor beleaguered mouse back into the wild. This is critical, as otherwise, if you forget to check your humane trap… it stops being humane pretty quickly.

If you’re looking for more inspiration to tackle your mouse problems, we can help. We’ve featured other traps of this type before, too. Meanwhile, if you’ve got your own friendly homebrew solutions to pesky pest problems, don’t hesitate to hit up the tipsline.


hackaday.com/2025/11/18/humane…



Dalle ore 12.00 di domani, mercoledì #19novembre, la piattaforma #CartadelDocente sarà accessibile per gli insegnanti che dispongano di eventuali residui dell’Anno Scolastico 2024/2025 e per i beneficiari di sentenze a cui è stata data esecuzione.

Roberto Rossetti reshared this.



“Vorrei invitare, soprattutto tutti i cattolici, ma anche le persone di buona volontà, ad ascoltare attentamente ciò che hanno detto. Credo che dobbiamo cercare modi per trattare le persone con umanità, trattandole con la dignità che hanno”.


"Defendants have indicated that some video between October 19, 2025 and October 31, 2025 has been irretrievably destroyed and therefore cannot be produced on an expedited basis or at all."#ICE


Two Weeks of Surveillance Footage From ICE Detention Center ‘Irretrievably Destroyed’


The Department of Homeland Security claimed in court proceedings that nearly two weeks worth of surveillance footage from ICE’s Broadview Detention Center in suburban Chicago has been “irretrievably destroyed” and may not be able to be recovered, according to court records reviewed by 404 Media.

The filing was made as part of a class action lawsuit against the Department of Homeland Security by people being held at Broadview, which has become the site of widespread protests against ICE. The lawsuit says that people detained at the facility are being held in abhorrent, “inhumane” conditions. The complaint describes a facility where detainees are “confined at Broadview inside overcrowded holding cells containing dozens of people at a time. People are forced to attempt to sleep for days or sometimes weeks on plastic chairs or on the filthy concrete floor. They are denied sufficient food and water […] the temperatures are extreme and uncomfortable […] the physical conditions are filthy, with poor sanitation, clogged toilets, and blood, human fluids, and insects in the sinks and the floor […] federal officers who patrol Broadview under Defendants’ authority are abusive and cruel. Putative class members are routinely degraded, mistreated, and humiliated by these officers.”

As part of discovery in the case, the plaintiffs’ lawyers requested surveillance footage from the facility starting from mid September, which is when ICE stepped up its mass deportation campaign in Chicago. In a status report submitted by lawyers from both the plaintiffs and the Department of Homeland Security, lawyers said that nearly two weeks of footage has been “irretrievably destroyed.”

“Defendants have agreed to produce. Video from September 28, 2025 to October 19, 2025, and also from October 31, 2025 to November, 7 2025,” the filing states. “Defendants have indicated that some video between October 19, 2025 and October 31, 2025 has been irretrievably destroyed and therefore cannot be produced on an expedited basis or at all.” Law & Crime first reported on the filing.
1. Surveillance Video from Inside Broadview. In their Expedited Discovery Request No. 9, Plaintiffs request surveillance video from inside the Broadview facility captured by Defendants’ equipment for a limited set of days, starting in mid-September 2025. Plaintiffs also request current video on a weekly basis. Defendants have agreed to produce video from September 28, 2025, to October 19, 2025, and also from October 31, 2025, to November 7, 2025. Plaintiffs are providing Defendants with hard drives for this production, and the parties expect that this initial production will be made shortly. The parties are discussing ways to ease the burden of production of video going forward, including by having Plaintiffs select random days for production rather than the production of all video on an on-going basis. Defendants have indicated that some video between October 19, 2025, and October 31, 2025, has been irretrievably destroyed and therefore cannot be produced on an expedited basis or at all. Plaintiffs are in the process of hiring an IT contractor. Plaintiffs’ contractor will meet with the government’s ESI Liaison (with attorneys on the phone) to attempt to work through issues concerning the missing video, including whether any content is able to be retrieved. While Plaintiffs intend to explore the issue of missing footage, Plaintiffs have communicated toA screenshot from the court filing
The filing adds that the plaintiffs, who are being represented by lawyers from the American Civil Liberties Union of Illinois, the MacArthur Justice Center, and the Eimer Stahl law firm, hired an IT contractor to work with the government “to attempt to work through issues concerning the missing video, including whether any content is able to be retrieved.”

Surveillance footage from inside the detention center would presumably be critical in a case about the alleged abusive treatment of detainees and inhumane living conditions. The filing states that the plaintiffs' attorneys have “communicated to Defendants that they are most concerned with obtaining the available surveillance videos as quickly as possible.”

ICE did not respond to a request for comment from 404 Media. A spokesperson for the ACLU of Illinois told 404 Media “we don’t have any insight on this. Hoping DHS can explain.”


#ice


“Per me fa molto bene un momento, una pausa durante la settimana, aiuta tanto”. Con queste parole il Papa, uscendo questa sera dalle Ville Pontificie di Castel Gandolfo per far rientro in Vaticano, ha risposto alle curiosità di alcuni giornalisti su …


Casting Metal Tools With Kitchen Appliances


Perhaps the biggest hurdle to starting a home blacksmithing operating is the forge. There’s really no way around having a forge; somehow the metal has to get hot enough to work. Although we might be imagining huge charcoal- or gas-fired monstrosities, [Shake the Future] has figured out how to use an unmodified, standard microwave oven to get iron hot enough to melt and is using it in his latest video to cast real, working tools with it.

In the past, [Shake the Future] has made a few other things with this setup like an aluminum pencil with a graphite core. This time, though, he’s stepping up the complexity a bit with a working tool. He’s decided to build a miniature bench vice, which uses a screw to move the jaws. He didn’t cast the screw, instead using a standard size screw and nut, but did cast the two other parts of the vice. He first 3D prints the parts in order to make a mold that will withstand the high temperatures of the molten metal. With the mold made he can heat up the iron in the microwave and then pour it, and then with some finish work he has a working tool on his hands.

A microwave isn’t the only kitchen appliance [Shake the Future] has repurposed for his small metalworking shop. He also uses a standard air fryer in order to dry parts quickly. He works almost entirely from the balcony of his apartment so he needs to keep his neighbors in mind while working, and occasionally goes to a nearby parking garage when he has to do something noisy. It’s impressive to see what can be built in such a small space, though. For some of his other work be sure to check out how he makes the crucibles meant for his microwave.

youtube.com/embed/56JHC8Jw8IE?…


hackaday.com/2025/11/18/castin…



“Purtroppo tutti i giorni stanno morendo le persone: bisogna insistere per una pace, cominciando con il cessate il fuoco, e poi dialogare”.


Gipfel zur Europäischen Digitalen Souveränität: Kehrtwende für die „Innovationsführerschaft“


netzpolitik.org/2025/gipfel-zu…



Un canale di informazioni, aggiornamenti, notizie dal Ministero dell'Istruzione e del Merito. Ci trovate anche su Twitter, Instagram, Facebook.


Cheap VHF Antenna? Can Do!


The magnetic loop antenna is a familiar sight in radio amateur circles as a means to pack a high performance HF antenna into a small space. It takes the form of a large single-turn coil made into a tuned circuit with a variable capacitor, and it provides the benefits of good directionality and narrow bandwidth at the cost of some scary RF voltages and the need for constant retuning. As [VK3YE] shows us though, magnetic loops are not limited to HF — he’s made a compact VHF magnetic loop using a tin can.

It’s a pretty simple design; a section from the can it cut out and made into a C shape, with a small variable capacitor at the gap. The feed comes in at the bottom, with the feed point about 20 % of the way round the loop for matching. The bandwidth is about 100 MHz starting from the bottom of the FM broadcast band, and he shows us it receiving broadcast, Airband, and 2 meter signals. It can be used for transmitting too and we see it on 2 meter WSPR, but we would have to wonder whether the voltages induced by higher power levels might be a little much for that small capacitor.

He’s at pains to point out that there are many better VHF antennas as this one has no gain to speak of, but we can see a place for it. It’s tiny, if you’re prepared to fiddle with the tuning its high Q gets rid of interference, and its strong side null means it can also reduce unwanted signals on the same frequency. We rather like it, and we hope you will too after watching the video below.

youtube.com/embed/JYIU0Nxn8fg?…


hackaday.com/2025/11/18/a-vhf-…



“Padre, fonte della vita, con umiltà e umiliazione ti consegniamo la vergogna e il rimorso per la sofferenza provocata ai più piccoli e ai più vulnerabili dell’umanità e ti chiediamo perdono”.


Congratulations to the 2025 Component Abuse Challenge Winners


For the Component Abuse Challenge, we asked you to do the wrong thing with electrical parts, but nonetheless come out with the right result. It’s probably the most Hackaday challenge we have run in a long time, and you all delivered! The judging was tight, but in the end three projects rose up to the top, and will each be taking home a $150 DigiKey gift certificate, but that doesn’t mean you shouldn’t give all of the projects a look.

So without further ado, let’s check out the winners and all the others that tickled the hacky regions of our judges’ brains.

Prize Winners


[Miroslav Hancar]’s LED Candles was a shoe-in, at least if you watched the video demo. It presents itself as a simple LED on a round PCB with a coin cell, but then when [Miroslav] lights it with an actual lighter, it starts glowing. (And maybe smoking just a little bit.) He makes both single-LED and quad-LED varieties, and they’re both gems.

The component misuse is an old favorite: the diode’s forward voltage drop depends on the temperature, and if you measure the voltage across the current-limiting resistor, you can read this voltage and determine when someone is setting fire to your LED. A bonus of the single-LED configuration is that if you touch the LED’s leads, your finger shunts some of the current, and you can “snuff” the LEDs out. And while we’ve seen similar LED hacks before, the addition of actual fire to this one seems to have warmed our judges’ hearts.

[Luke J. Barker]’s Need an Electrical Slip Ring? is simplicity itself, and appears to have been born of the mother of invention. [Luke] was making a VertiBird helicopter toy, which spins around on the desk and rises and falls with joystick control. And for that, he needed a slip ring. Enter the humble audio jack, which fills the job nicely, transmitting power to the rotating helicopter without twisting up wires in the process. There’s not much magic here, but it’s a fantastic idea when you need something to spin.

On the other end of the spectrum, [Craig D]’s Boosting voltage with a cable looks like it shouldn’t work at first, but it does. In most step-up-voltage setups, you’re storing the energy in either a capacitor or inductor, and switching it in and out of the circuit to hop the voltage up. Here, the energy isn’t ever really “stored” as much as it’s “in flight”.

A circuit sends a pulse down a long length of coaxial cable that is left open at the other end. The pulse reflects off the open end and heads back toward the voltage driver, which then fires off another pulse at just the right time to make the travelling wave a little bit bigger, and this continues. It’s like pushing a swing – adding a little extra oomph at just the right time can build up. There’s a lot of cool physics here, a nice simulation that actually ends up corresponding very well with reality, and in the end the pulse timing isn’t rocket science, but rather figuring out the resonant frequency along the coax. And it works well enough to light up two neon bulbs in series (~140 V) off of a 15 V power supply.

Honorable Mentions


We got way more cool entries than we have prizes, so we try to round them up into categories and give them a little time in the sun.

Out of Spec


Normally, a 555 timer oscillator circuit relies on filling up a capacitor with a current that’s throttled through a resistor. How can you make it go faster? Make the capacitor smaller and the resistor less resistive. What happens when you get rid of them both entirely, relying on stray capacitance and the resistance of whatever wire you’re using? That’s what [MagicWolfi] aimed to find out with his Ludicrous 555 project.

The IC-Abusing Diode Tester is an absolutely horrible circuit. Nothing in it works like it should. The only reason the IC doesn’t burn up is that it’s more robust than the datasheet promises, and the battery used has such a high internal resistance that it can’t source that much current anyway. Parts are powered by leakage current, and below their minimum voltage. [Joseph Eoff] counts seven values that are out of spec in this single historical circuit, so that’s gotta count for something.

Junk Box Substitutions


You need GPIO lines, but you have a UART. [Ken Yap] proposes repurposing the DSR, DTR, RTS, and CTS lines as inputs and outputs, and he writes code to make them do his bidding.

Or maybe you’re working on self-assembling robots and you need some magic glue to hold different modules together. [Miana]’s Low-melt-solder connected robots is half research project, and half hack. Resistors are used to melt solder, magnets align the parts together, and when it all cools down, it’s as if two modules are brazed together. This one’s a lot more than a hack, but we’re honored to have it entered in the contest anyway!

Bizarro World


We honestly thought we’d get more entries that made use of the duality of most sensors / emitters. Instead, we got two. [Nick]’s Better Than Bluetooth does the LED-as-photosensor trick, and concludes that it’s better than Bluetooth if expense, limited range, and frustration are what you’re looking for in a data link. Meanwhile, [Kauz] proves that electromagnets are also pickups by building a guitar pickup out of six relays.

Side Effects


Everything is a fuse if you run enough current through it. [JohnsonFarms] pushed conductive filament to the melting point, and calibrated it along the way. While roasting a hotdog with mains voltage and a couple forks, [Ian Dunn] discovered that if you stick some LEDs in it, they light up.

Most old op-amps oscillate out of control when given feedback, unless you damp it down a bit with a capacitor. [Adrian Freed] found an op-amp lousy enough that would do this at audio frequencies, and used it to reimagine a classic noisemaker.

Finally, while you should probably avoid the metastable middle-zones between digital one and zero, [SHAOS] combines unbuffered NAND and NOR gates to tease out a third logic state. [Bob Widlar] would be proud.

Thanks All!


As always, we had more great entries that we could feature here, so head on over to Hackaday.io and check them out. And thanks again to DigiKey for providing our top three with $150 gift certificates. If you’re looking for your chance to show off a project that you’re working on, hang on for a while because we’ll be starting up a new contest in early 2026.

2025 Hackaday Component Abuse Challenge




La XXIV edizione del #concorso nazionale “I giovani ricordano la #Shoah” per l’anno scolastico 2025/2026 è promossa dal #MIM, in collaborazione con l’Unione delle Comunità Ebraiche Italiane.



Journalists’ cameras become targets at Oregon protests


You’ve probably seen the inflatable frogs, the dance parties, the naked bike ride. Maybe you’ve also seen the darker images: a federal officer aiming a weapon at protesters, or federal agents hurling tear gas and flash bangs into peaceful demonstrations at a Portland, Oregon, immigration facility.

Local journalists have been attacked for bringing images like these to the world. They’re being tear-gassed and shot with crowd-control munitions by federal agents simply for doing their jobs.

Photojournalist John Rudoff is among them. He’s been covering these protests since June, photographing both peaceful marches and violent responses from federal officers that often follow.

On Oct. 11, while documenting a protest, Rudoff was struck by a stinger grenade, even though he was clearly identifiable as press. He was bruised, but not deterred.

“If you cover protests, you’re going to have discomfort and hazard. Period. That’s just the way it is,” Rudoff told us. “They shoot 20-year-old girls, and they shoot 70-year-old men, and they shoot people in wheelchairs, and they shoot blind people,” he added, referring to federal agents using crowd-control munitions. “The word impunity seems to be coined for them.”

Despite the danger, Rudoff refuses to stop documenting. “The entire media ecosystem has been covered with the administration’s rantings about the war-ravaged hellscape of Portland, and the city is burning down, and ICE officers are being attacked, and on and on and on,” he said. “I feel some obligation to try and counter this frankly preposterous narrative that the city’s burning down. It isn’t.”

Independent journalist Kevin Foster, who has also been covering the Portland protests, shares that sense of duty and outrage. “It’s clear the Trump administration wants to paint Portland as a war zone to seize more control, but it’s a lot harder to do that when I’m showing you all the dancing inflatable frogs,” he told us. “At the end of the day, someone needs to be there to document abuses of power.”

Foster has felt the danger up close while reporting from protests. “I’ve seen other press members shot with pepper balls, I’ve had flash bangs go off at my feet, and tear gas canisters explode above my head,” he said. But he continues to work to keep the public informed, reporting on federal agents’ heavy use of force and escalatory tactics at the protests.

For Foster, the concerns go beyond federal agents at protests. “Right-wing influencers and agitators have reportedly doxxed people,” Foster said. “With the state of the presidency and the history of authoritarianism, I do sometimes worry about persecution as well, especially given that a lot of my coverage subverts the narrative produced by right-wing media.”

The incident in Portland that got the most attention involved Katie Daviscourt, a reporter for the conservative news site The Post Millennial. She reported being hit in the face by someone swinging a flagpole at a protest, blackening her eye. Police let the suspect go, prompting feigned outrage from the White House.

Holding federal agents accountable

Violence against the press, from any direction, is an attack on the First Amendment itself, especially when enabled by law enforcement. Unfortunately, those purportedly appalled by the Daviscourt incident have not shown similar concern over federal law enforcement attacks on journalists who don’t further their preferred political narratives.

Since the Portland protests began in June, for instance, photojournalist Mason Lake has been struck by crowd-control munitions twice, pepper-sprayed, and had a rifle aimed at him. Yet federal officials haven’t condemned these attacks, or the attack on Rudoff.

“It’s very disconcerting to see how free press has been trampled,” Lake told the U.S. Press Freedom Tracker, a project of Freedom of the Press Foundation (FPF). “The best we can do is push back and make sure the truth isn’t run over.”

In other cities, like Chicago, Illinois, and Los Angeles, California, federal court orders protect journalists from such assaults. But Portland currently has no such order. Legal precedent from 2020 protests in Portland recognized reporters’ First Amendment right to cover protests and shielded them from dispersal orders. But it has done little to rein in federal agents today.

“They have to be sued, and they have to be enjoined, and they have to be criminally prosecuted until they stop doing it,” suggested Rudoff.

Until that happens, however, journalists must keep speaking up, not just about what they see, but also for being attacked for witnessing it. “Most attacks on journalists aren’t reported,” explained Rudoff. But, he added, “I don’t know a single journalist out there who hasn’t been shot or hit or knocked over or tear-gassed or pepper-sprayed. It’s everybody.”

Foster put it even more bluntly: “Many Americans seem to have this impression that brutalizing protesters and targeting the press only happens in other countries. If that notion hasn’t shattered for you yet, wait until your ears are ringing from flash bangs and you’re enveloped in a cloud of tear gas so thick you can’t see 15 feet.”

This isn’t some distant dictatorship. It’s the city of Portland. And the First Amendment is under siege.


freedom.press/issues/journalis…



youtube.com/watch?v=MNz8lPL04N




#Ucraina: l'utopia e la realtà


altrenotizie.org/primo-piano/1…


Paolo Berizzi: “Vi racconto misteri e legami di CasaPound”


@Giornalismo e disordine informativo
articolo21.org/2025/11/paolo-b…
Da poco in libreria con un testo che sta facendo particolarmente discutere (“Il libro segreto di CasaPound”, Fuoriscena editore), Paolo Berizzi ha deciso di devolvere alla nostra associazione una parte



"I.A. BASTA!”: l’appello dei docenti contro l’intelligenza artificiale a scuola - L'INDIPENDENTE

lindipendente.online/2025/11/1…

Un appello, una mozione e un questionario per dire “basta” all’intelligenza artificiale nella scuola. È questo il cuore della mobilitazione lanciata dal gruppo auto-organizzato di lavoratrici e lavoratori della scuola, che vede la partecipazione di docenti, personale ATA, rappresentanti del sindacal


La militarizzazione dell’AI è già iniziata. Ma dove arriverà?

@Notizie dall'Italia e dal mondo

Molti analisti parlano ormai dell’uso bellico dell’Intelligenza Artificiale in guerra come del vero “momento Oppenheimer” della nostra epoca. Un termine che indica l’idea che, come accadde con il nucleare a metà Novecento, stiamo varcando una soglia dalla quale sarà difficile tornare indietro. Un





Dal dominio cognitivo a quello cibernetico. L’Italia sotto attacco ibrido nel dossier Crosetto

@Notizie dall'Italia e dal mondo

Presentato durante la riunione del Consiglio Supremo di Difesa, il “Non-paper sul contrasto alla guerra ibrida” del ministro della Difesa, Guido Crosetto, parla chiaro: l’Italia è già in un conflitto sottosoglia, quotidiano, mutevole



fanpage.it/wamily/quando-torni…

ma perché? le donne devono occuparsi dolo di fare figli e crescere la prole... sono sicura che c'è un sacco di gente (più uomini) che concorderebbe infatti con questa affermazione. questa è una donna santa....

in reply to simona

ah ecco... i cattivi erano 2... pure il capitalismo. dal mio punto di vista sono sempre semplificazioni. se la gente non è consapevole e non si sa comportare civilmente non puoi ritenere responsabile né la chiesa, né il capitalismo, in ultima analisi. è l'uomo che rende merda qualsiasi cosa che fa, non il sistema economico o sociale che rende l'uomo merda. dopotutto siamo volendo anche capaci di scegliere. se poi scegliamo di non scegliere beh... la causa di ogni male siamo solo noi stessi. anche se ammetto che la carenza di cultura può motivatamente spingere a scelte superficiali e dannose. ma tolta la mancanza di cultura poi non ci sono altre scuse.
in reply to simona

le false promesse sono che l'uomo può essere onesto. perché se così fosse non ci sarebbe neppure bisogno di regole. e invece purtroppo sapiamo che l'anarchia è utopia. e che comunque l'uomo in condizioni di paura si comporta in modo istintivo e irrazionale, vanificando qualsiasi forma di civiltà acquisita. su base di quale criterio rigoroso tu valuti l'efficienza del sistema monetario (qualsiasi cosa ci stiamo riferendo) in una cifra dell'8%? dubito possa essere considerato un qualche riferimento affidabile. come pure l'idea che giustizia sia dividere la ricchezza di 100 per 100 persone e dare 1 ad ognuno. è evidente che ne necessità possono variare da persona a persona. sono tutte semplificazioni e le semplificazioni non descrivono il mondo e non portano da nessuna parte. P.S. se si tratta di pannelli solari 8% di efficienza è quasi buono, calcolati nell'intera giornata.


Ucci ucci, è in vendita la villa di Angelo Balducci


@Politica interna, europea e internazionale
Un annuncio, apparso in questi giorni su uno dei principali portali immobiliari, ha destato la curiosità dei frequentatori di salotti e circoli romani: in vendita esclusiva villa con parco e piscina nel cuore di Roma, in via delle Mura Latine 44. Così recita l’inserzione di Idealista, che ripropone quella originaria di



Perché non posso scrivere di tutto (anche se mi sta a cuore.)


noblogo.org/transit/perche-non…


Perché non posso scrivere di tutto (anche se mi sta a cuore.)


(181)

(S1)

Spesso sui social capita che, se parli sempre e solo di una certa causa (per esempio la #Palestina) qualcuno ti accusi di non interessarti ad altri drammi, come quelli che succedono in #Sudan o in altri luoghi del mondo.Questa è una questione che merita un po’ di chiarezza, perché il punto vero è un altro: nessuno di noi è un’agenzia di stampa, e non parlare di una cosa non significa affatto fregarsene. La verità è che tutti noi abbiamo dei limiti: di tempo, di energie, ma anche di capacità emotiva.

Non possiamo essere costantemente presenti su ogni emergenza, su ogni ingiustizia, su ogni tragedia che si presenta nel mondo. E, sinceramente, provarci significherebbe anche rischiare di annullare noi stessi, perdendo quella sensibilità che ci spinge a interessarci davvero di alcune questioni.

La partecipazione emotiva è inevitabilmente selettiva: ci sentiamo più vicini e coinvolti in certe storie perché le conosciamo meglio, le capiamo, o semplicemente perché in quel momento sentiamo di poter fare qualcosa di più concreto.

Non è una questione di indifferenza verso le altre cause, ma una scelta, consapevole o meno, di dove concentrare le nostre forze, anche per proteggere la nostra salute mentale. E poi, diciamolo: sui #socialmedia la pressione è fortissima. Se non ti vedi parlare di tutto, c’è chi pensa che non ti importi. Ma questa è una falsa aspettativa.

(S2)

La responsabilità di dare voce a ogni singola emergenza non spetta a noi singoli individui, ma a un sistema di informazione ben più complesso.Noi partecipiamo con ciò che possiamo, con quello che sappiamo, con quello che ci muove davvero.

Quando vedi qualcuno che si concentra spesso su una sola causa, non darla per scontata: può significare un impegno profondo, non una mancanza di interesse per il resto. E chi ti conosce sa che dietro quel silenzio ci sono comunque solidarietà, preoccupazione e rispetto. Non serve parlare di tutto per esserci davvero.

In fondo, la vera indifferenza è un’altra cosa: è non provarci nemmeno, è non farsi toccare da niente, è voltare le spalle senza nemmeno chiedersi come si potrebbe fare la differenza. La partecipazione selettiva, invece, è umana, corretta e spesso necessaria. Insomma, non siamo agenzie di stampa, ma persone. E va bene così.

#Blog #SocialMedia #Opinioni #EmpatiaSelettiva #PartecipazioneEmotiva

Mastodon: @alda7069@mastodon.unoTelegram: t.me/transitblogFriendica: @danmatt@poliverso.orgBlue Sky: bsky.app/profile/mattiolidanie…Bio Site (tutto in un posto solo, diamine): bio.site/danielemattioli

Gli scritti sono tutelati da “Creative Commons” (qui)

Tutte le opinioni qui riportate sono da considerarsi personali. Per eventuali problemi riscontrati con i testi, si prega di scrivere a: corubomatt@gmail.com




MEMO: OGGI POMERIGGIO A ROMA (ZONA MONTAGNOLA)!
⬇⬇⬇⬇⬇
🍝Spaghetti Hacker👩‍💻 pensare e praticare un rapporto diverso con la tecnologia

(N.B. Il titolo dell’iniziativa non ha nulla a che vedere con il libro.)

CONDIVIDI PARTECIPA DIFFONDI

📅 Martedì 18 novembre, ore 18:00
PEDAGOGIA HACKER — con Collettivo C.I.R.C.E.
Un’esplorazione su come costruire relazioni più consapevoli con il digitale.
Rivolto a chi educa, crea, si prende cura o semplicemente vuole abitare la tecnologia con un’attitudine critica e conviviale.
Per ridurre l’alienazione tecnica e sperimentare forme di immaginazione liberatoria.

📍 Via Fontanellato 69, al Che Guevara Roma

roma.convoca.la/event/spaghett…


MEMO: OGGI POMERIGGIO A ROMA (ZONA MONTAGNOLA)!
⬇⬇⬇⬇⬇
🍝Spaghetti Hacker👩‍💻 pensare e praticare un rapporto diverso con la tecnologia

(N.B. Il titolo dell’iniziativa non ha nulla a che vedere con il libro.)

CONDIVIDI PARTECIPA DIFFONDI

@gnulinuxitalia

📍 Via Fontanellato 69, al Che Guevara Roma

roma.convoca.la/event/spaghett…





Brasile: leader guarani ucciso in un attacco alla sua comunità


@Notizie dall'Italia e dal mondo
Mentre alla COP30 si discute di tutela climatica e diritti dei popoli originari, l’assalto armato contro la comunità di Pyelito Kue rivela la realtà quotidiana dei Guarani Kaiowá: terre usurpate, demarcazioni bloccate e violenze sistematiche nell’impunità dello Stato brasiliano.



Riceviamo e pubblichiamo: Comunicato stampa

Con il continuo peggioramento del maltempo e della crisi umanitaria nella Striscia di Gaza, centinaia di migliaia di famiglie Gazawi vivono in tende logore che non offrono alcuna protezione dal freddo e dalle piogge, causando una situazione catastrofica che colpisce soprattutto bambini, donne e anziani.
Riteniamo la comunità internazionale responsabile del proprio silenzio e sottolineiamo che il persistente divieto di far entrare gli aiuti essenziali – in particolare tende adeguate, caravan e materiali di riparo – rappresenta una grave violazione degli obblighi umanitari e una minaccia diretta alla vita di centinaia di migliaia di sfollati.
Chiediamo alle Nazioni Unite, alle organizzazioni internazionali e all’UNRWA di intervenire immediatamente e di esercitare una pressione concreta per garantire l’ingresso immediato degli aiuti e l’avvio della ricostruzione, ponendo fine alle restrizioni che aggravano la sofferenza e spingono Gaza verso un inverno disastroso.
La situazione è ormai insostenibile: ogni ritardo vuol dire mettere a rischio altre vite.

17/11/2025
Associazione dei Palestinesi in Italia (API)



Usa, il Pentagono vuole accelerare sulle tecnologie disruptive. Ecco come

@Notizie dall'Italia e dal mondo

Gli Stati Uniti definiscono la loro prossima agenda tecnologica militare. Emil Michael, sottosegretario alla Ricerca e Ingegneria del Dipartimento della Difesa, ha presentato le sei aree che guideranno gli investimenti e lo sviluppo dei sistemi d’arma nei prossimi anni, con




Gaza, l’Onu approva il piano Trump: una pace sotto tutela americana


@Notizie dall'Italia e dal mondo
Il Consiglio di sicurezza adotta la risoluzione Usa e affida a Washington la gestione della Striscia: nessuna garanzia sulla fine dell’occupazione, sulla ricostruzione e sull’autodeterminazione palestinese.
L'articolo Gaza, l’Onu approva il piano Trump: una pace sotto





Un Cile stanco e indebitato sceglie la destra: Jara fatica a invertire la rotta


@Notizie dall'Italia e dal mondo
L’alleanza tra ultradestra e neoliberisti mette in ombra la candidata progressista, isolata e tiepida. Paura, securitarismo e tensioni migratorie: così l’estrema destra ha ricostruito la sua egemonia.
L'articolo Un Cile stanco e indebitato



Buio su Gaza. E sull’umanità


@Giornalismo e disordine informativo
articolo21.org/2025/11/buio-su…
Trump e Netanyahu non hanno vinto, hanno stravinto. Il mondo ha perso, l’umanità ha perso, è sprofondata in un buco nero di cui solo la storia chiederà il conto. La finta tregua a Gaza ha dato il risultato che il presidente americano e il governo israeliano volevano: il silenzio su Gaza. E



Francesco Sassetto. Mart
freezonemagazine.com/articoli/…
“Nella foresta c’è una radura inaspettata che può essere trovata solo da chi si è perso”. È uno dei versi più celebri del grande poeta premio nobel Tomas Tranströmer, vero e proprio manifesto della sua poetica, volta alla ricerca dell’essenza dell’esperienza umana. Mi è venuto in mente questo passo del poeta svedese, leggendo la nuova […]
L'articolo Francesco Sassetto. Mart proviene da FREE ZONE
“Nella


Simon Mason – Un omicidio a novembre
freezonemagazine.com/rubriche/…
Quando il corpo di una giovane donna viene ritrovato in circostanze misteriose, la polizia di Oxford si ritrova davanti a un caso complesso e pieno di contraddizioni. A guidare l’indagine è l’improbabile duo formato da Ray Wilkins, giovane promessa dalla mente analitica e dalla condotta impeccabile, e Ryan Wilkins, il suo quasi-omonimo opposto: istintivo, insofferente […]
L'articolo


Tensione alta tra Cina e Giappone, la lady di ferro nipponica soffia sul fuoco


@Notizie dall'Italia e dal mondo
La premier del Giappone, la nazionalista di destra Sanae Takaichi, minaccia un intervento militare al fianco di Taiwan contro Pechino e intanto aumenta la spesa militare e rafforza l'esercito
L'articolo Tensione alta tra Cina e Giappone, la lady di ferro




Aggiornamenti release di Friendica


@Signor Amministratore ⁂ ciao Super Admin, volevo sapere come mai non ci sono nuove versioni del software di friendica... ? Anche la release installata su poliverso.org è di dicembre 2024. Ho visto au GitHub che negli anni precedenti c'erano sempre varie release durante l'anno, ma nel 2025 nessuna! Ho visto che c'è un branch di luglio 2025, ho anche visto una sua preview su friendica.world e devo dire che è molto buona... Molto più usabile, accessibile e ottimizzata per smartphone. Resto in attesa ciao

#friendica #release #a11y #mobile

in reply to Skamu

Ciao @Skamu
Una premessa: su questo server non vedrai mai una Release Candidate.

Il nostro server deve utilizzare una Release stabile e non una Release sperimentale, perché gli utenti di questo server non devono fare i Beta Tester, ma devono essere lasciati liberi di usare Friendica come (appunto) utenti

Al momento non abbiamo né voglia, né soprattutto soldi da spendere per un server secondario su cui lasciar fare test tagli utenti.

Il fatto che molti server Friendica installino le Release candidate è un gesto sicuramente molto gentile verso gli sviluppatori, che in questo modo possono Testare le loro ultime modifiche, ma riteniamo che sia un gesto Poco rispettoso nei confronti degli utenti.

Purtroppo hai ragione sul fatto che nell'ultimo anno non ci sono stati rilasci stabili del software, con una inversione di tendenza rispetto a tutti gli ultimi anni. C'è anche da dire che con l'ultima release, friendica ha finalmente raggiunto una stabilità e una velocità (sì, non è una battuta) mai avuta prima d'ora. Posso quindi capire che gli sviluppatori abbiano deciso di prendersi un anno Prima di tirare fuori una nuova release. Ricordo Poi che lo staff di sviluppo di Friendica è ridotto all'osso e quando c'è da mettere mano sul sistema, le righe di codice che si sono accumulate in questi dieci anni sono davvero tante.
Speriamo quindi che venga pubblicata prima della fine dell'anno la nuova release, ma anche in questo caso temo di deluderti: a seguito di alcune esperienze non proprio positive, non aggiorniamo mai il sistema alla nuova release prima di avere fatto un test su un nostro piccolo server personale di test e prima di avere verificato che non ci siano problemi che rendono necessario il rilascio di qualche patch. Pertanto, se la nuova Release verrà pubblicata a dicembre molto probabilmente qui la installeremo nel 2026 😅

in reply to Signor Amministratore ⁂

@Signor Amministratore ⁂ Ciao, perfetto e tutto chiaro, grazie della spiegazione! Allora speriamo che la prossima release stabile venga fuori presto, così possiamo usufruirne tutti... grazie mille!


A Researcher Made an AI That Completely Breaks the Online Surveys Scientists Rely On#News #study #AI


A Researcher Made an AI That Completely Breaks the Online Surveys Scientists Rely On


Online survey research, a fundamental method for data collection in many scientific studies, is facing an existential threat because of large language models, according to new research published in the Proceedings of the National Academy of Sciences (PNAS). The author of the paper, associate professor of government at Dartmouth and director of the Polarization Research Lab Sean Westwood, created an AI tool he calls "an autonomous synthetic respondent,” which can answer survey questions and “demonstrated a near-flawless ability to bypass the full range” of “state-of-the-art” methods for detecting bots.

According to the paper, the AI agent evaded detection 99.8 percent of the time.

"We can no longer trust that survey responses are coming from real people," Westwood said in a press release. "With survey data tainted by bots, AI can poison the entire knowledge ecosystem.”

Survey research relies on attention check questions (ACQs), behavioral flags, and response pattern analysis to detect inattentive humans or automated bots. Westwood said these methods are now obsolete after his AI agent bypassed the full range of standard ACQs and other detection methods outlined in prominent papers, including one paper designed to detect AI responses. The AI agent also successfully avoided “reverse shibboleth” questions designed to detect nonhuman actors by presenting tasks that an LLM could complete easily, but are nearly impossible for a human.

💡
Are you a researcher who is dealing with the problem of AI-generated survey data? I would love to hear from you. Using a non-work device, you can message me securely on Signal at ‪(609) 678-3204‬. Otherwise, send me an email at emanuel@404media.co.

“Once the reasoning engine decides on a response, the first layer executes the action with a focus on human mimicry,” the paper, titled “The potential existential threat of large language models to online survey research,” says. “To evade automated detection, it simulates realistic reading times calibrated to the persona’s education level, generates human-like mouse movements, and types open-ended responses keystroke by-keystroke, complete with plausible typos and corrections. The system is also designed to accommodate tools for bypassing antibot measures like reCAPTCHA, a common barrier for automated systems.”

The AI, according to the paper, is able to model “a coherent demographic persona,” meaning that in theory someone could sway any online research survey to produce any result they want based on an AI-generated demographic. And it would not take that many fake answers to impact survey results. As the press release for the paper notes, for the seven major national polls before the 2024 election, adding as few as 10 to 52 fake AI responses would have flipped the predicted outcome. Generating these responses would also be incredibly cheap at five cents each. According to the paper, human respondents typically earn $1.50 for completing a survey.

Westwood’s AI agent is a model-agnostic program built in Python, meaning it can be deployed with APIs from big AI companies like OpenAI, Anthropic, or Google, but can also be hosted locally with open-weight models like LLama. The paper used OpenAI’s o4-mini in its testing, but some tasks were also completed with DeepSeek R1, Mistral Large, Claude 3.7 Sonnet, Grok3, Gemini 2.5 Preview, and others, to prove the method works with various LLMs. The agent is given one prompt of about 500 words which tells it what kind of persona to emulate and to answer questions like a human.

The paper says that there are several ways researchers can deal with the threat of AI agents corrupting survey data, but they come with trade-offs. For example, researchers could do more identity validation on survey participants, but this raises privacy concerns. Meanwhile, the paper says, researchers should be more transparent about how they collect survey data and consider more controlled methods for recruiting participants, like address-based sampling or voter files.

“Ensuring the continued validity of polling and social science research will require exploring and innovating research designs that are resilient to the challenges of an era defined by rapidly evolving artificial intelligence,” the paper said.




Dal 18 al 20 novembre il #MIM sarà presente al Salone Dello Studente di #Roma con un info point per l'orientamento, spazi per conoscere gli ITS Academy e un'area dedicata al progetto #MadeinMIM. All’evento parteciperà il Ministro Giuseppe Valditara.