LEAF Mission Seeks to Grow Plants on the Moon
Credit: Space Lab
We have seen a recent surge of interest in whether it’s possible to grow potatoes and other plants in Martian soil, but what is the likelihood that a future (manned) lunar base could do something similar? To that end [Space Lab] is developing the LEAF project that will be part of NASA’s upcoming Artemis III lunar mission. This mission would be the first to have Americans return to the Moon by about 2028, using the somewhat convoluted multi-system SLS-Starship-Lunar Gateway trifecta. The LEAF (Lunar Effects on Agricultural Flora) science module will feature three types of plants (rape (Brassica Rapa), duckweed and cress (Arabidopsis thaliana) ) in an isolated atmosphere.
The main goal of this project is to find out how the plants are affected by the lunar gravity, radiation and light levels at the landing site at the south pole. This would be the equivalent of a hydroponics setup in a lunar base. After about a week of lunar surface time the growth chamber will be split up into two: one returning back to Earth for examination and the other remains on the surface to observe their long-term health until they perish from cold or other causes.
This is not the first time that growing plants on the lunar surface has been attempted, with China’s Chang’e 4 mission from 2019. The lander’s Lunar Micro Ecosystem featured a range of seeds as well, which reportedly successfully sprouted, but the project was terminated after 9 days instead of the planned 100 due to issues with heating the biosphere during the brutal -52°C lunar night. Hopefully LEAF can avoid this kind of scenario when it eventually is deployed on the Moon.
Clever Circuit Makes Exercise Slightly Less Boring
We say this with the greatest respect, but [Joel] — your exercise routine is horrible! Kudos for getting up and doing something, but 108 trips up and down the stairs? That sounds like torture, not exercise. Even [Joel] admits that it’s so boring that he loses count, and while we’d bet that he isn’t likely to restart the routine when that happens, it’s still annoying enough that he built this clever little lap counter to automate the task.
We kid, of course; any exercise is better than no exercise, and the stairs offer few excuses for skipping the daily workout. To bust the boredom problem, [Joel] toyed with a couple of ideas for toting up his laps before landing on a beam-break optical system with sensors at the top and the bottom of the stairs. Worried about the potential for false triggering by swinging arms and legs, he searched for ideas for bounceless switch circuits in the old “Engineer’s Notebook” by [Forrest Mims] and found a circuit close enough to modify for his needs. Each sensor setup has a high-output red LED and a phototransistor on one side of the stairwell, and a retroreflector on the opposite wall. Breaking the beam switches off the LED on that sensor and switches the other one on, to save on battery power.
The sensor’s flips and flops are counted and displayed on a three-digit seven-segment LED; [Joel] offers no detail on the counter itself, but with [Mims] as his muse, we suspect it’s something like the three-digit BCD counter circuit a few pages on from the bounceless switch circuit. The lap counter is shown in action in the brief video below.
youtube.com/embed/aWRN3UjRsD8?…
Rapid Prototyping PCBs With The Circuit Graver
Walking around the alley at Hackaday Supercon 2024, we noticed an interesting project was getting quite a bit of attention, so we got nearer for a close-up. The ‘Circuit Graver’ by [Zach Fredin] is an unconventional PCB milling machine, utilizing many 3D printed parts, the familiar bed-slinger style Cartesian bot layout and a unique cutting head. The cutting tool, which started life as a tungsten carbide lathe tool, is held on a rotary (‘R’) axis but can also move vertically via a flexure-loaded carriage driven by a 13 kg servo motor.
The stocky flexure took a lot of iteration, as the build logs will show. Despite a wild goose chase attempting to measure the cutting force, a complete machine solution was found by simply making everything stiff enough to prevent the tool from chattering across the surface of the FR4 blank. Controlling and maintaining the rake angle was a critical parameter here. [Zach] actually took an additional step, which we likely wouldn’t have thought of, to have some copper blanks pre-fabricated to the required size and finished with an ENIG coating. It’s definitely a smart move!
To allow the production of PCB-class feature sizes compatible with a traditional PCB router, the cutting tool was sharpened to a much smaller point than would be used in a lathe using a stone. This reduced the point size sufficiently to allow feature sizes down to 4 mils, or at least that’s what initial characterization implied was viable. As you can see from the build logs, [Zach] has achieved a repeatable enough process to allow building a simple circuit using an SMT 74HC595 and some 0402 LEDs to create an SAO for this year’s Supercon badge. Neat stuff!
We see a fair few PCB mills, some 3D printed, and some not. Here’s a nice one that fits in that former category. Milling PCBs is quite a good solution for the rapid prototyping of electronics. Here’s a guide about that.
youtube.com/embed/GmnwfgNjpVQ?…
FLOSS Weekly Episode 808: Curl – Gotta Download ’em All
This week, Jonathan Bennett and Randal Schwartz chat with Daniel Stenberg about curl! How many curl installs are there?! What’s the deal with CVEs? How has curl managed to not break its ABI for 18 years straight? And how did Daniel turn all this into a career instead of just a hobby? Watch to find out!
youtube.com/embed/HzHQ-_7TpVE?…
Did you know you can watch the live recording of the show Right on our YouTube Channel? Have someone you’d like us to interview? Let us know, or contact the guest and have them contact us! Take a look at the schedule here.
play.libsyn.com/embed/episode/…
Direct Download in DRM-free MP3.
If you’d rather read along, here’s the transcript for this week’s episode.
Places to follow the FLOSS Weekly Podcast:
hackaday.com/2024/11/06/floss-…
Supercon 2023: Restoring the Apollo Guidance Computer
Humans first visited the Moon in 1969. The last time we went was 1972, over 50 years ago. Back then, astronauts in the Apollo program made their journeys in spacecraft that relied on remarkably basic electronics that are totally unsophisticated compared to what you might find in an expensive blender or fridge these days. Core among them was the Apollo Guidance Computer, charged with keeping the craft on target as it travelled to its destination and back again.
Marc Verdiell, also known as CuriousMarc, is a bit of a dab hand at restoring old vintage electronics. Thus, when it came time to restore one of these rare and storied guidance computers, he was ready and willing to take on the task. Even better, he came to the 2023 Hackaday Supercon to tell us how it all went down!
Restoration
youtube.com/embed/Ky9aYtN3qT4?…
You might have heard whispers of this effort before, or seen some of our prior coverage. Indeed, the effort to resurrect this Apollo Guidance Computer (AGC) began in earnest back in late 2018. This particular example of the AGC was found in an electronics recycler in 1976, and the plan was to restore it prior to the 50th anniversary of the first Moon landing in 1969. Marc worked with Carl Claunch, Ken Shirriff, and Mike Stewart on the project, and documented much of it on his YouTube channel under the name [CuriousMarc].
As Marc explains, Apollo actually had four main computers. There was the Launch Vehicle Digital Computer (LVDC) which was charged with steering the Saturn V from launch, along with the Flight Control Computer which was actually an analog machine. There were then two identical Apollo Guidance Computers (AGC)—one was in the Apollo Command Module (Apollo CM), and one was in the Lunar Excursion Module (LEM). There was also the Abort Guidance System for handling any situation where things got out of hand. With the aid of old NASA diagrams, Marc shows us where the AGC lived in the Command Module and the LEM.The AGC pictured alongside the DSKY.
The Apollo program marked the first time humans had trusted the piloting a spacecraft or aircraft to a computer system. The AGC was designed by MIT, built by Raytheon, and it weighed 70 pounds and drew 50 watts. While it looks bulky and heavy by today’s standards, it was wildly compact and efficient by 1960s standards. The interface for the AGC was the DSKY—short for “Display and Keyboard.” It’s how the astronauts controlled and interacted with the AGC during the mission. The AGC was absolutely mission critical. In the words of NASA engineer Dan Lickly, ‘The AGC did everything.” It was responsible for orienting the spacecraft, controlling rocket burns and guiding the craft into orbit, and for handling the landing of the lunar module as well as re-entry into the Earth’s atmosphere.The AGC was built with a highly modular design.
Marc tells us how one example of the Apollo Guidance System ended up at an electronics scrapper in 1975, by order of one of NASA’s engineers. It soon ended up in the hands of hacker Jimmie Loocke, who got his hands on a full two tons of Apollo program hardware. Years later, one Mike Stewart reached out to Jimmie, hoping to look at a real AGC and take some measurements for the sake of working on a replica. When this was happening, Jimmie in turn asked if the device could be powered on, and eventually a team was assembled to try and make that happen. The first attempt happened in a Houston hotel room in October 2018, and the project took off from there.
The talk includes tons of glorious internal shots of the AGC, serial number RAY 14, which was built for an engineering test series. The AGC was assembled from stacks of neatly-arranged modules full of integrated circuits, all connected through an elegantly wire-wrapped backplane. In fact, this was one of the earliest computers that relied on integrated circuits. All of these were dual 3-input NOR gates or analog amplifier ICs. As non-flight hardware, most of the modules in this AGC weren’t potted, which had the benefit of making them easier to work on. However, two of the modules for the core memory did have potting which would make them harder to work on.Wire-wrap construction was considered highly reliable—critical for human space missions.
Repairing and restoring the AGC was aided by official schematics, so the team knew what they were working with. Modules were tested, and the core memory—essentially the RAM—was found bad. There was also no core rope memory—essentially the ROM for the AGC which stored the program. A rope memory emulator from Raytheon was used instead for this engineering test article. This was for ease of development, as it allowed changing the stored program more easily than rewiring a core rope memory device. However, the Raytheon emulator device was undocumented, which took some reverse engineering work to figure out. Still, powering up the device with no RAM or ROM was a positive experience—the AGC still tried to boot and there were some minor signs of life.
The rest of the talk outlines how the AGC was brought fully back to life. The team improvised an FPGA memory emulator, X-rayed failed components, and built replicas of things they couldn’t replace, all in service of the final goal. Sneaky hacks were used to get bits and pieces functional again against the ods.Even connectors had to be remade from scratch since the AGC used long-forgotten standards that are no longer in use. The fact that Marc works for connector supplier Samtec proved particularly useful in this case. Prepare to choke on your beverage when he explains how much that cost.The team were able to show their restoration work to Eldon Hall, the engineer who led the development of the Apollo Guidance Computer (AGC).
We won’t spoil the whole journey here, because Marc’s talk is worth watching from start to finish. There are plenty of twists and turns, and all along, you’re waiting for that ultimate delight—the joy every hacker knows when the beleagured machine finally roars into life. Never mind the wonderful heartwarming moments at the end.
It’s simply wonderful to see a dedicate team bring this storied hardware back to life—and even better to see them flying simulator missions with the real AGC hardware doing its thing. It’s a fantastic restoration effort and one that was documented in intimate detail, and it’s joyous that we get to see everything that went into making this happen.
Con Trump alla Casa Bianca il confronto non sarà facile, ma la coesione transatlantica resterà. Parla Talò
@Notizie dall'Italia e dal mondo
[quote]Con la vittoria repubblicana negli Stati Uniti, l’Europa si trova di fronte a sfide che richiedono unità, preparazione e pragmatismo. La presidenza di Donald Trump pone nuovamente l’accento sulla necessità
Notizie dall'Italia e dal mondo reshared this.
Si concludono oggi a Palermo le Giornate Nazionali del Cinema per la Scuola 2024.
“Le Giornate sono un elemento fondamentale del Piano Nazionale Cinema e Immagini per la Scuola, non solo perché rappresentano un’offerta formativa d’eccellenza, ma anc…
Trump stravince anche a Springfield, la città dove secondo il tycoon gli immigrati mangiavano “cani e gatti domestici”
@Politica interna, europea e internazionale
Trump vince anche a Springfield nonostante le polemiche sull’immigrazione C’è un dato clamoroso che è la fotografia perfetta di quanto accaduto in America dove Donald Trump ha trionfato alle elezioni presidenziali statunitensi divenendo,
Politica interna, europea e internazionale reshared this.
Mai sottovalutare i redneck.
Buona fortuna a tutti noi, ne avremo bisogno.
#uspol #electionday #trump
like this
reshared this
Sfide e scenari per la Difesa dopo il voto Usa. L’analisi del gen. Caruso
@Notizie dall'Italia e dal mondo
[quote]Il ritorno di Donald Trump alla Casa Bianca segna l’inizio di una nuova era nelle relazioni internazionali. Il 47simo presidente degli Stati Uniti, che si è imposto nelle elezioni di ieri, si prepara a ridisegnare la politica estera americana con potenziali ripercussioni drammatiche sugli equilibri
Notizie dall'Italia e dal mondo reshared this.
ACCORDI ABRAMO. L’Arabia saudita li aggirerà anche con Trump presidente
@Notizie dall'Italia e dal mondo
L'Arabia saudita vuole l'accordo bilaterale di sicurezza con gli Usa prima della fine del mandato di Joe Biden. Ma non intende normalizzare le relazioni con Israele. Senza Riyadh, gli Accordi di Abramo tra Tel Aviv e quattro paesi arabi hanno scarso valore
Notizie dall'Italia e dal mondo reshared this.
Ben(e)detto del 6 novembre 2024
@Politica interna, europea e internazionale
L'articolo Ben(e)detto del 6 novembre 2024 proviene da Fondazione Luigi Einaudi.
Politica interna, europea e internazionale reshared this.
This week we have Jason on EagleAI, Sam on Microsoft's gender AI mistake, and Joseph on the infostealer industry.
This week we have Jason on EagleAI, Sam on Microsoftx27;s gender AI mistake, and Joseph on the infostealer industry.#Podcast
Podcast: The Plan to Use AI to Purge Voter Rolls
This week we have Jason on EagleAI, Sam on Microsoft's gender AI mistake, and Joseph on the infostealer industry.Joseph Cox (404 Media)
Trump presidente. Paura e delirio a Washington
@Notizie dall'Italia e dal mondo
Donald Trump torna alla Casa Bianca grazie ad una vittoria netta. Hanno vinto le promesse demagogiche in campo economico e un'idea vendicativa dei rapporti con nemici ed alleati
L'articolo Trump presidente. Paura e delirio a pagineesteri.it/2024/11/06/mon…
Notizie dall'Italia e dal mondo reshared this.
Trump ha vinto, è di nuovo presidente degli Stati Uniti
@Notizie dall'Italia e dal mondo
Decisiva la vittoria in Pennsylvania.
«Renderemo di nuovo grande l'America» afferma. Ha già ricevuto le congratulazioni di Benyamin Netanyahu che ha tifato per lui
L'articolo Trump ha vinto, è di nuovo pagineesteri.it/2024/11/06/mon…
Notizie dall'Italia e dal mondo reshared this.
Il Comitato europeo per la protezione dei dati (EDPB) adotta il suo primo rapporto nell'ambito del quadro normativo UE-USA sulla privacy dei dati e una dichiarazione sulle raccomandazioni sull'accesso ai dati per le forze dell'ordine
La dichiarazione sulle raccomandazioni del gruppo ad alto livello sull'accesso ai dati per un'applicazione efficace della legge sottolinea che i diritti fondamentali devono essere salvaguardati quando le autorità di contrasto accedono ai dati personali delle persone fisiche. Pur sostenendo l'obiettivo di un'efficace attività di contrasto, l'EDPB sottolinea che alcune delle raccomandazioni del gruppo ad alto livello potrebbero causare gravi intrusioni nei confronti dei diritti fondamentali, in particolare il rispetto della vita privata e della vita familiare.Pur prendendo atto con soddisfazione della raccomandazione, l'EDPB può portare alla creazione di condizioni di parità in materia di conservazione dei dati, ma ritiene che un obbligo ampio e generale di conservazione dei dati in forma elettronica da parte di tutti i fornitori di servizi creerebbe un'interferenza significativa con i diritti delle persone fisiche. Pertanto, l'EDPB si chiede se ciò soddisferebbe i requisiti di necessità e proporzionalità della Carta dei diritti fondamentali dell'UE e della giurisprudenza della CGUE.
Nella sua dichiarazione, l'EDPB sottolinea inoltre che le raccomandazioni relative alla cifratura non dovrebbero impedirne l'uso né indebolire l'efficacia della protezione che fornisce. Ad esempio, l'introduzione di un processo lato client che consenta l'accesso remoto ai dati prima che siano crittografati e inviati su un canale di comunicazione, o dopo che siano decifrati presso il destinatario, in pratica indebolirebbe la crittografia. Preservare la protezione e l'efficacia della cifratura è importante per evitare ripercussioni negative sul rispetto della vita privata e della riservatezza e per garantire che siano salvaguardate la libertà di espressione e la crescita economica, che dipendono da tecnologie affidabili.
reshared this
La Nato (e l’Italia) sono pronte al nuovo presidente Usa. Gli scenari di Talò
@Notizie dall'Italia e dal mondo
[quote]Quello tra Giorgia Meloni e Mark Rutte è stato un incontro tra due interlocutori che si conoscono bene, maturato nel corso dei due anni di governo del nostro presidente del Consiglio. Un rapporto, tra l’altro, all’insegna della cordialità e della collaborazione
Notizie dall'Italia e dal mondo reshared this.
Campania, via libera al terzo mandato di De Luca coi voti del Pd. Ma il Nazareno ribadisce: “Non sarà il nostro candidato”
@Politica interna, europea e internazionale
Campania, via libera al terzo mandato per De Luca. Ma il Pd: “Non sarà il nostro candidato” Il Consiglio Regionale della Campania ha approvato la legge regionale che consentirebbe al governatore in carica Vincenzo
Politica interna, europea e internazionale reshared this.
La Cina svela il suo nuovo caccia di quinta generazione. Ed è identico all’F-35
@Notizie dall'Italia e dal mondo
[quote]Mentre le industrie e le Forze armate occidentali sviluppano la sesta generazione del combattimento aereo, c’è chi (in ritardo) arriva alla quinta. La Forza aerea dell’Esercito popolare di liberazione (Plaaf) cinese ha ufficialmente svelato il suo nuovo
Notizie dall'Italia e dal mondo reshared this.
Ma che dice questo articolo?
La Cina in teoria ha i gen5 da un bel pezzetto (il J-31 è stato svelato nel 2012), e non mi risulta che né il J-31 né il J-35 siano ancora andati oltre al livello “demo”, quindi non si capisce cosa giustifichi il discorso che la Cina entra adesso nel club dei gen5 — o ci entra quando li produce per davvero, o ci è entrata 12 anni fa.
Peraltro per come la mette l’articolo i gen5 fino ad ora sono stati appannaggio esclusivo degli USA, quando c’è anche la Russia col Su-57.
Certo, il su-57 è un fighter del Lidl, ma fino ad ora non c’è motivo per considerare diversamente il J-35..
Speciale USA: Pechino pronta allo scontro globale, che sia Harris o Trump il presidente
@Notizie dall'Italia e dal mondo
PODCAST Pechino segue le presidenziali Usa con la consapevolezza che chiunque sia il vincitore, Harris o Trump, gli Stati Uniti continueranno la loro politica di scontro con la Cina. Intervista al giornalista e analista Michelangelo Cocco
Notizie dall'Italia e dal mondo reshared this.
L’adesione, a livello nazionale, rilevata alla data del 4 novembre, è stata del 5,49%.
Ministero dell'Istruzione
#Scuola, disponibili i dati provvisori sullo sciopero del #31ottobre. L’adesione, a livello nazionale, rilevata alla data del 4 novembre, è stata del 5,49%.Telegram
Connor Moucka said he didn't have a lawyer yet. He was arrested at the request of the U.S.
Connor Moucka said he didnx27;t have a lawyer yet. He was arrested at the request of the U.S.#News #Hacking
Alleged Snowflake Hacker Appears in Court, Says Prison in Lockdown
Connor Moucka said he didn't have a lawyer yet. He was arrested at the request of the U.S.Joseph Cox (404 Media)
Germania. Arrestati otto neonazisti che si addestravano al golpe
@Notizie dall'Italia e dal mondo
In Germania sono stati arrestati alcuni componenti di un'organizzazione neonazista accusati di preparare un colpo di stato
L'articolo Germania. Arrestati otto neonazisti che si pagineesteri.it/2024/11/05/mon…
Notizie dall'Italia e dal mondo reshared this.
Bersani assolto dall’accusa di diffamazione verso Vannacci: “Il fatto non sussiste”
@Politica interna, europea e internazionale
Pier Luigi Bersani è stato assolto dall’accusa di diffamazione nei confronti del generale Roberto Vannacci, europarlamentare della Lega: per il giudice del Tribunale di Ravenna “il fatto non sussiste”. Bersani era stato denunciato da Vannacci perché il primo settembre 2023, durante
Politica interna, europea e internazionale reshared this.
@RaccoonForFriendica new version 0.1.0-beta19 available for testing!
Changelog:
🦝 fix crash in search when result type is hashtags or users;
🦝 improved login flow, especially for Mastodon users;
🦝 remove channels from selection when using the "Circle" visibility for posts (Friendica-only);
🦝 improved hashtag and mention opening, especially on Mastodon;
🦝 experimental UnifiedPush integration for push notifications;
🦝 dependency updates.
Thanks to all testers, you are awesome! #livefasteattrash
#friendica #friendicadev #androidapp #androiddev #fediverseapp #raccoonforfriendica #kotlin #multiplatform #kmp #compose #cmp #opensource #procyonproject
reshared this
Documenti sul cellulare. Facciamoci le domande giuste
@Privacy Pride
Il post completo di Christian Bernieri è sul suo blog: garantepiracy.it/blog/document…
Tempo di lettura: 10 minuti. Ma la parte utile è alla fine. (Lo so, sono malefico) In questi giorni è iniziata la fase di test dell'integrazione di IO, l'app di PAGO-PA
Privacy Pride reshared this.
Ministero dell'Istruzione
#NoiSiamoLeScuole questa settimana è dedicato al Liceo “Melchiorre Gioia” di Piacenza e all’Istituto Superiore “Mattei” di Fiorenzuola d’Arda (PC) che, con i fondi del #PNRR, hanno avviato percorsi di mentoring per la dispersione implicita e creato n…Telegram
Ministero dell'Istruzione
Il Ministro Giuseppe Valditara, ha firmato oggi un nuovo decreto per finanziare ulteriori 64 asili nido, nell’ambito del #PNRR, per un importo pari a 40,8 milioni di euro, di cui il 55% è destinato ai comuni delle regioni del Mezzogiorno.Telegram
Report: “La sorella del ministro Giuli è assunta dalla Camera ma lavora per FdI”. Lei replica: “Falso, bado a mio figlio malato”
@Politica interna, europea e internazionale
L’inchiesta di Report su Antonella Giuli, sorella del ministro della Cultura “Si può costringere una donna, una madre, una professionista che gode della stima dei suoi datori di lavoro a rivelare la verità dolente di una vita
Politica interna, europea e internazionale reshared this.
ovviamente se invece che su t.me/slowforward o tinyurl.com/slowchannel mi seguite curiosando su linktr.ee/differx oppure sbirciando ko-fi.com/differx57119/posts, per me va bene lo stesso ;) 😁
Poliversity - Università ricerca e giornalismo reshared this.
È disponibile il nuovo numero della newsletter del Ministero dell’Istruzione e del Merito.
Ministero dell'Istruzione
#NotiziePerLaScuola È disponibile il nuovo numero della newsletter del Ministero dell’Istruzione e del Merito.Telegram
Bloccati sta cippa, Elon
@Privacy Pride
Il post completo di Christian Bernieri è sul suo blog: garantepiracy.it/blog/blocati-…
https://x.com/xeng/status/1852934762144698736?s=46&t=h5DrgTbndHlziv2P4_H0NQ Oggi inizia l’attivazione dell’annunciata modifica alla funzione “blocca” di X. Per me è un grave errore che può avere conseguenze negative nella vita reale delle persone. Forse
Privacy Pride reshared this.
Genesi
Genesi: « In quel giorno il Signore concluse questa alleanza con Abram: alla tua discendenza io do questo paese dal fiume d'Egitto al grande fiume, il fiume Eufrate; il paese dove abitano i Keniti, i Kenizziti, i Kadmoniti, gli Hittiti, i Perizziti, i Refaim, gli Amorrei, i Cananei, i Gergesei, gli Evei e i Gebusei».
Gli ha promesso una terra come Totò promise la Fontana di Trevi al turista e questi ancora oggi pretendono di far valere 'sto contratto...
fino al 10 novembre è possibile partecipare al premio “poesia di strada” – 2024
slowforward.net/2024/11/01/fin…
Poliversity - Università ricerca e giornalismo reshared this.
Guardando la serie Orange the new black non ho potuto fare a meno di riflettere su quello che non so se fosse un messaggio voluto dell'autore, che ci parla dell'innata incoerenza e fragilità umana. E parla del concetto di giustizia umana e dei suoi limiti. Mi riferisco specificatamente all'evento della rivolta e alla detenuta donna che gestisce le trattative con il governatore. La trattativa riesce ad arrivare a un buon punto, ma si arena inesorabilmente sull'evento di sangue che ha dato inizio a tutto: la classica "goccia" che va traboccare il vaso. Sintetizzerò brevemente gli eventi: Già le condizioni all'interno del carcere di minima sicurezza erano peggiorate notevolmente, da quando una società privata, avida e senza scrupoli, aveva preso il controllo del carcere. Ne seguono poi disordini causati dall'inserimento in organico di guardie del tutto prove di umanità. Durante questi disordini, una guardia, mal addestrata e mal guidata, uccide una detenuta. Questa guardia, dotata di umanità, non sarà più in grado di riprendere la sua vita e il rimorso per quanto successo la distruggerà, ma chiaramente è ben lontana dall'essere l'unica artefice della vicenda cruenta. Questo da il via alla rivolta. La detenuta responsabile delle trattative, dopo aver ottenuto praticamente tutto, anche grazie al direttore del carcere, unico vero amico e sostenitore di tutte le detenute, chiede "giustizia" per chi ha ucciso, soffocandola, la compagna di carcere. Il rappresentante del governatore, si difende sostenendo che non controlla il sistema giudiziario e la trattativa finisce per arenarsi. In seguito la rivolta ha termine, per il tradimento di una detenuta, e finisce in modo abbastanza cruento e violento, con la consueta ricerca del capro espiatorio, nonché la classica uccisione di una guardia, persona autenticamente sadica, il cui omicidio sarà addebitato ovviamente alla rivolta, con conseguente ricerca dei leader della rivolta da incolpare.
Il cortocircuito che ho notato è che chi ha vissuto come detenuto all'interno di un carcere, e vissuto un iter giudiziario che tutto ha in mente meno lo scopo di fare giustizia, ha bloccato una trattativa che avrebbe apportato beneficio all'intero carcere (di minima sicurezza) per quella che ha chiamato giustizia, che però in pratica avrebbe attivato solo un sistema alla fine in grado di produrre solo violenza (non certo giustizia), sistema che conosceva benissimo.
Un'ulteriore analisi necessaria riguarda poi il personale del carcere, che probabilmente a causa delle spinte di una società in-civile, finisce per diventare o vittima o carnefice e comunque corrotto come i carcerati o il sistema economico che alimenta le carceri e il loro business. Un sistema incapace di rieducare, per precisa volontà popolare, in definitiva. Un sistema "sforna delinquenti". E' triste che in tale sistema non importi a nessuno se la persona è colpevole o innocente, ma valgano solo ragioni di opportunità. La conclusione finale è che nessuna società civile riesce a controllare gli istinti violenti umani, sebbene nel nord europa, fra i paesi scandinavi, esistano effettivamente carceri non lager. Forse l'umanità, come qualsiasi specie vivente, è destinata all'estinzione.
Bruno Bottai: l’eloquenza del silenzio
@Politica interna, europea e internazionale
Esattamente 10 anni fa, il 2 novembre 2014, moriva Bruno Bottai, l’ultimo gigante della diplomazia italiana del XX secolo. Con la sua scomparsa si è chiusa, in modo probabilmente irreversibile, un’epoca nella quale il peso del ruolo d’Ambasciatore d’Italia era non solo qualitativamente rilevante ma, in alcuni casi, imprescindibile.
Politica interna, europea e internazionale reshared this.
Pirati.io
in reply to The Privacy Post • • •PS: qualcuno ha notato le differenze tra la versione inglese e quella italiana?
edpb.europa.eu/news/news/2024/…
L'EDPB adotta la sua prima relazione nell'ambito del quadro UE-USA sulla privacy dei dati e una dichiarazione sulle raccomandazioni sull'accesso ai dati per le attività di contrasto | European Data Protection Board
www.edpb.europa.eureshared this
informapirata ⁂ e Privacy Pride reshared this.
Lord Vetinari
in reply to Pirati.io • • •In quello italiano si parla di "attività di contrasto", in quello inglese di "law enforcement", in quello tedesco "wirksame Strafverfolgung"