Counting objects is an ideal task for automation, and when focusing on a single type of object, there are many effective solutions. But what if you need to count hundreds of different objects? That’s the challenge [Christopher] tackled with his latest addition to his impressive automation projects. (Video, embedded below.)

[Christopher] has released a series of videos showcasing a containerized counting system for various fasteners, available on his YouTube channel. Previously, he built remarkable devices to count and sort fastener hardware for automated packaging, but those systems were designed for a single fastener type. He effectively highlights the vast complexity of the fastener ecosystem, where each diameter has dozens of lengths, multiple finishes, various head shapes, and more.

To address this, he developed a machine that accepts standardized containers of fastener hardware. These uniform boxes can hold anything from a small M2 countersunk screw to a large M8 cap head bolt and everything in between. To identify the loaded box and determine the appropriate operations, the machine features an RFID reader that scans each box’s unique tag.

Once a box is loaded, the machine tilts it to begin counting fasteners using a clever combination of moving platforms, an optical sensor, and gravity. A shelf first pushes a random number of fasteners onto an adjustable ledge. A second moving platform then sweeps excess fasteners off, leaving only those properly aligned. It’s no surprise this system has nine degrees of freedom. The ledge then moves into view of a sensor from a flatbed scanner, which detects object locations with an impressive 0.04 mm resolution across its length—remarkable for such an affordable sensor. At this point, the system knows how many fasteners are on the ledge. If the count exceeds the desired number, a sloped opening allows the ledge to lift just high enough to release the correct amount, ensuring precision.

The ingenuity continues after the initial count. A secondary counting method uses weight, with a load cell connected to the bin where fasteners drop. A clever over-center mechanism decouples the tilting system from the load cell to ensure accurate readings. We love automation projects, and this one incorporates so many ingenious design elements that it’s sure to inspire others for their future endeavors.

youtube.com/embed/1lFvGlfb2sA?…

hackaday.com/2025/07/06/fasten…

Taking delivery of a new vehicle from a dealership is an emotional mixed bag. On the one hand, you’ve had to endure the sales rep’s hunger to close the deal, the tedious negotiations with the classic “Let me run that by my manager,” and the closer who tries to tack on ridiculous extras like paint sealer and ashtray protection. On the other hand, you’re finally at the end of the process, and now you get to play with the Shiny New Thing in your life while pretending it hasn’t caused your financial ruin. Wouldn’t it be nice to skip all those steps in the run-up and just cut right to the delivery? That’s been Tesla’s pitch for a while now, and they finally made good on the promise with their first self-driving delivery.

The Model Y sedan drove itself from its birthplace at the Texas Gigafactory to its new owner, a 30-minute trip that covered a variety of driving situations. The fully autonomous EV did quite well over its journey, except for at the very end, where it blatantly ignored the fire lane outside its destination and parked against the red-painted curb. While some are trying to make hay of Tesla openly flaunting the law, we strongly suspect this was a “closed course” deal, at least for that last bit of the trip. So the production team probably had permission to park there, but it’s not a good look, especially with a parking lot just a few meters to the left. But it’s pretty cool that the vehicle was on the assembly line just a half-hour before. Betcha the owner still had to pay for dealer prep and delivery, though.

How much space does a million dollars take up? According to the Federal Reserve Bank of Chicago, a million one-dollar bills will fit into a cube about 50 inches (1.27 m) on a side, and they even built one as a display for their museum. Putting aside for the moment the fact that the Federal Reserve Bank of Chicago feels that they have enough public appeal to support a museum — we’d love to see the gift shop — would a million bucks really fit into a little more than a cubic meter? Not according to Calvin Liang, who took it upon himself to determine the real number of semolians on display. To do so, he built an app called Dot Counter, which lets users count items in an image by clicking on them. It turns out that the cube holds more like $1.55 million, at least assuming there are no voids inside. He also works through the math on what it would take to make an actual million-dollar cube; turns out that the 2.53:1 aspect ratio of a dollar bill makes it tough to manage anything other than a cuboid slightly smaller than the display cube holding $1.008 million. All of that really doesn’t matter, though, since Dot Counter is sure to help us win every “Guess the number of jelly beans in the jar” contest we see.

Even for the smallest of jobs, driving a truck is a hard job. And the job just keeps getting harder as the load gets bigger, as a driver in Maryland can attest to after a bizarre accident last week during the transport of a wind turbine blade. It’s a little hard to tell exactly what happened from the published stories, and the stills from the traffic-potato aren’t much help either. But it looks like the steerable rear wheels on the mega-long trailer used to move the blade, which looks to be at least 50 meters long, decided to take the eastbound lane of I-70 while the rest of the truck was going west. The pucker factor for the driver must have been off the charts as the blade crossed the highway median. Luckily, traffic was light at 5:00 AM when the accident happened, but even still, one injury was reported, and the ensuing mayhem as the blade remained lodged across both lanes as the Monday rush started must have been one for the books.

A couple of weeks ago, we featured a story on a great collection of Telnet games and demos, some of which are so accomplished that it really blows the mind. One that didn’t make that list is this fantastic ASCII moon-phase tracker. It uses ASCII art to depict the current phase of the moon visually, and yes, you can copy and paste the characters. True, it’s web-based, which probably accounts for it not appearing on the Telnet games list, but the source code is available, so making it work over Telnet might be a fun project for someone.

And finally, we’ve heard about “Netflix and chill,” but is “NASA and chill” about to be a thing? Apparently so, since NASA+, the US space agency’s media outlet, made a deal with Netflix to offer its live programming on the streaming service. This is fantastic news for Netflix subscribers, who instead of watching live launches and such for free on YouTube can pay be the privilege of watching the same content on Netflix, complete with extra ads thrown in. That’s one giant leap for mankind right there.

hackaday.com/2025/07/06/hackad…

The inside of this AF117 transistor can was a thriving whisker ecosystem. (Credit: Anthony Francis-Jones)
AF114 germanium transistors and related ones like the AF115 through AF117 were quite popular during the 1960s, but they quickly developed a reputation for failure. This is due to what should have made them more reliable, namely the can shielding the germanium transistor inside that is connected with a fourth ‘screen’ pin. This failure mode is demonstrated in a video by [Anthony Francis-Jones] in which he tests a number of new-old-stock AF-series transistors only for them all to test faulty and show clear whisker growth on the can’s exterior.

Naturally, the next step was to cut one of these defective transistors open to see whether the whiskers could be caught in the act. For this a pipe cutter was used on the fairly beefy can, which turned out to rather effective and gave great access to the inside of these 1960s-era components. The insides of the cans were as expected bristling with whiskers.

The AF11x family of transistors are high-frequency PNP transistors that saw frequent use in everything from consumer radios to just about anything else that did RF or audio. It’s worth noting that the material of the can is likely to be zinc and not tin, so these would be zinc whiskers. Many metals like to grow such whiskers, including lead, so the end effect is often a thin conductive strand bridging things that shouldn’t be. Apparently the can itself wasn’t the only source of these whiskers, which adds to the fun.

In the rest of the video [Anthony] shows off the fascinating construction of these germanium transistors, as well as potential repairs to remove the whisker-induced shorts through melting them. This is done by jolting them with a fairly high current from a capacitor. The good news is that this made the component tester see the AF114 as a transistor again, except as a rather confused NPN one. Clearly this isn’t an easy fix, and it would be temporary at best anyway, as the whiskers will never stop growing.

youtube.com/embed/Otac6XXkp4M?…

hackaday.com/2025/07/06/diagno…

These are tough times for American hackers, and rife with uncertainty. Trade wars are on, off, on again– who can keep track? If you’re used to getting everything from China, that can really cramp your style. [Jeremy Cook] took the time to write up hisexperience prototyping with American-made PCBs , just in time for us to totally miss Independence Day.

The project was a simple nightlight, using a single LED, a photoresistor, a transistor, and a CR2032 battery. The CR2032 battery does complicate things, though: [Jeremy] figured out a neat way to hold the battery using a PCB cutout, but it needs to be a 0.8 mm board. (That’s going to matter in a moment.)He’s put that PCB on GitHub if you’re interested.

To start off, JLBPCB is the Chinese clearing house of choice for [Jeremy], and they quoted a very cheap $7.10 for 20 boards. The problem was that shipping across the Pacific Ocean, plus the ever-wavering tariff charge, brought the price to $48.08. About five dollars of which was from tariffs; the rest you can put down to the cost of jet fuel and the size of the Pacific Ocean.

On the other hand, OSH Park, was able to get [Jeremy] three of their pretty purple PCBs for $7.75 all-inclusive. Overall, since he’s prototyping and does not want 20 boards this revision, [Jeremy] saves quite a lot by staying local– including the environmental impact of shipping and laxer regulations in China, if that sort of thing matters to you.

The suprizing thing is the turnaround time: [Jeremy] got his pretty purple PCBs from OSH Park a full twenty days after ordering. Similar orders from China take only a week, which is just mind-blowing when you stop and think about the great honking ocean in the way. We could perhaps cut OSH Park some slack in that 0.8 mm boards are not the most common, but their quoted turnaround time for two-layer prototypes is minimum 12 days.

They do offer a “super-swift” option for two-layer boards, but then they lose on price. As [Jeremy] points out, there are always tradeoffs. If you’re really in a hurry, nothing’s faster thanmilling the boards yourself. Or you could go the old-schooltoner-transfer etching route.

Our thanks to [Jeremy] for the tip. If you’ve got a better way to prototype, dosend us a tip about it. Also, please us know in the comments if you’ve tried an in-country PCB fabricator, and how it compared to the usual offerings from the PRC.

hackaday.com/2025/07/06/does-m…

Un altro pezzo di storia sta finalmente abbandonando l’iconico sistema operativo. Microsoft ha avviato il processo di rimozione di PowerShell 2.0, la versione obsoleta dello strumento console, da Windows 11.

Questa edizione è apparsa ai tempi di Windows 7 e in seguito si è diffusa nelle generazioni precedenti della piattaforma, tra cui XP, Vista e soluzioni server come Windows Server 2003 e 2008. Nel corso degli anni, le funzionalità di PowerShell si sono ampliate in modo significativo e gli approcci all’amministrazione sono migliorati.

Tuttavia, l’implementazione obsoleta è stata mantenuta a lungo per motivi di compatibilità. È stata ufficialmente dichiarata obsoleta nel 2017, ma non c’è stata fretta di escluderla completamente dal sistema: ciò è stato impedito dalla dipendenza di diversi prodotti aziendali, tra cui singole edizioni di SQL Server, dalla seconda versione.

Ora l’azienda ha deciso di completare finalmente questa fase di transizione. PowerShell 2.0 non è più presente nelle ultime build di anteprima di Windows 11. A breve, gli sviluppatori prevedono di rimuoverlo completamente dalle versioni stabili. Promettono di annunciare le date esatte e ulteriori dettagli in seguito.

Strumenti moderni per lavorare con la console sono disponibili da tempo per gli utenti. La maggior parte dei dispositivi attuali ha PowerShell 5.1 installato e la versione multipiattaforma multifunzionale di PowerShell 7.x supporta sia Windows che altri sistemi operativi. Queste soluzioni offrono funzionalità di automazione avanzate, maggiore sicurezza e una migliore interazione con i software moderni.

Il rifiuto dei componenti obsoleti è un passo fondamentale nell’aggiornamento dell’ecosistema Windows. Microsoft sottolinea che l’eliminazione delle tecnologie obsolete contribuisce a rafforzare la protezione, semplificare la gestione dell’infrastruttura e ridurre il rischio di sfruttamento delle vulnerabilità . Ciò è particolarmente importante considerando che le vecchie versioni di PowerShell sono state a lungo utilizzate dagli aggressori per organizzare attacchi.

L'articolo PowerShell 2.0 riposa in pace! Microsoft avvia il processo di rimozione da Windows 11 proviene da il blog della sicurezza informatica.

"Quando si tratta di mandare in bancarotta il nostro Paese con sprechi e corruzione, viviamo in un sistema monopartitico, non in una democrazia. Oggi, l'America Party è nato per restituirvi la libertà".

Tutto ciò è meraviglioso.

E comunque aveva ragione Yoda, "sempre due ci sono: un maestro e un apprendista".

rainews.it/articoli/2025/07/us…

Elon Musk annuncia la nascita del partito "America"

Ieri, nel giorno delle celebrazioni dell'Indipendenza Usa, aveva lanciato un sondaggio su X

^{Redazione di Rainews (RaiNews)}