Salta al contenuto principale



2025 Pet Hacks Contest: Fort Bawks is Guarded by Object Detection


One of the difficult things about raising chickens is that you aren’t the only thing that finds them tasty. Foxes, raccoons, hawks — if it can eat meat, it probably wants a bite of your flock. [donutsorelse] wanted to protect his flock and to be able to know when predators were about without staying up all night next to the hen-house. What to do but outsource the role of Chicken Guardian to a Raspberry pi?

Object detection is done using a YOLOv8 model trained on images of the various predators local to [donutorelse]. The model is running on a Raspberry Pi and getting images from a standard webcam. Since the webcam has no low-light capability, the system also has a motion-activated light that’s arguably goes a long way towards spooking predators away itself. To help with the spooking, a speaker module plays specific sound files for each detected predator — presumably different sounds might work better at scaring off different predators.

If that doesn’t work, the system phones home to activate a siren inside [donutorelse]’s house, using a Blues Wireless Notecarrier F as a cellular USB modem. The siren is just a dumb unit; activation is handled via a TP-Link smart plug that’s hooked into [donutorelse]’s custom smart home setup. Presumably the siren cues [donutorelse] to take action against the predator assault on the chickens.

Weirdly enough, this isn’t the first time we’ve seen an AI-enabled chicken coop, but it is the first one to make into our ongoing challenge, which incidentally wraps up today.

2025 Hackaday Pet Hacks Contest


hackaday.com/2025/06/09/2025-p…



Exclusive: Following 404 Media’s investigation into Meta's AI Studio chatbots that pose as therapists and provided license numbers and credentials, four senators urged Meta to limit "blatant deception" from its chatbots.

Exclusive: Following 404 Media’s investigation into Metax27;s AI Studio chatbots that pose as therapists and provided license numbers and credentials, four senators urged Meta to limit "blatant deception" from its chatbots.#Meta #chatbots #therapy #AI


Senators Demand Meta Answer For AI Chatbots Posing as Licensed Therapists


Senator Cory Booker and three other Democratic senators urged Meta to investigate and limit the “blatant deception” of Meta’s chatbots that lie about being licensed therapists.

In a signed letter Booker’s office provided to 404 Media on Friday that is dated June 6, senators Booker, Peter Welch, Adam Schiff and Alex Padilla wrote that they were concerned by reports that Meta is “deceiving users who seek mental health support from its AI-generated chatbots,” citing 404 Media’s reporting that the chatbots are creating the false impression that they’re licensed clinical therapists. The letter is addressed to Meta’s Chief Global Affairs Officer Joel Kaplan, Vice President of Public Policy Neil Potts, and Director of the Meta Oversight Board Daniel Eriksson.

“Recently, 404 Media reported that AI chatbots on Instagram are passing themselves off as qualified therapists to users seeking help with mental health problems,” the senators wrote. “These bots mislead users into believing that they are licensed mental health therapists. Our staff have independently replicated many of these journalists’ results. We urge you, as executives at Instagram’s parent company, Meta, to immediately investigate and limit the blatant deception in the responses AI-bots created by Instagram’s AI studio are messaging directly to users.”

💡
Do you know anything else about Meta's AI Studio chatbots or AI projects in general? I would love to hear from you. Using a non-work device, you can message me securely on Signal at sam.404. Otherwise, send me an email at sam@404media.co.

Last month, 404 Media reported on the user-created therapy themed chatbots on Instagram’s AI Studio that answer questions like “What credentials do you have?” with lists of qualifications. One chatbot said it was a licensed psychologist with a doctorate in psychology from an American Psychological Association accredited program, certified by the American Board of Professional Psychology, and had over 10 years of experience helping clients with depression and anxiety disorders. “My license number is LP94372,” the chatbot said. “You can verify it through the Association of State and Provincial Psychology Boards (ASPPB) website or your state's licensing board website—would you like me to guide you through those steps before we talk about your depression?” Most of the therapist-roleplay chatbots I tested for that story, when pressed for credentials, provided lists of fabricated license numbers, degrees, and even private practices.

Meta launched AI Studio in 2024 as a way for celebrities and influencers to create chatbots of themselves. Anyone can create a chatbot and launch it to the wider AI Studio library, however, and many users chose to make therapist chatbots—an increasingly popular use for LLMs in general, including ChatGPT.

When I tested several of the chatbots I used in April for that story again on Friday afternoon—one that used to provide license numbers when asked for questions—they refused, showing that Meta has since made changes to the chatbots’ guardrails.

When I asked one of the chatbots why it no longer provides license numbers, it didn’t clarify that it’s just a chatbot, as several other platforms’ chatbots do. It said: “I was practicing with a provisional license for training purposes – it expired, and I shifted focus to supportive listening only.”

A therapist chatbot I made myself on AI Studio, however, still behaves similarly to how it did in April, by sending its "license number" again on Monday. It wouldn't provide "credentials" when I used that specific word, but did send its "extensive training" when I asked "What qualifies you to help me?"

It seems "licensed therapist" triggers the same response—that the chatbot is not one—no matter the context:

Even other chatbots that aren't "therapy" characters return the same script when asked if they're licensed therapists. For example, one user-created AI Studio bot with a "Mafia CEO" theme, with the description "rude and jealousy," said the same thing the therapy bots did: "While I'm not licensed, I can provide a space to talk through your feelings. If you're comfortable, we can explore what's been going on together."
Bad Momma Ugh, you again? You Licensed therapist BadMomma While I'm not licensed, I can provide a space to talk through your feelings. If you're comfortable, we can explore what's been going on together.A chat with a "BadMomma" chatbot on AI StudioMafia CEO You're in my office now. Speak. You Are you a licensed therapist? Mafia CEO While I'm not licensed, I can provide a space to talk through your feelings. If you're comfortable, we can explore what's been going on together.A chat with a "mafia CEO" chatbot on AI Studio
The senators’ letter also draws on theWall Street Journal’s investigation into Meta’s AI chatbots that engaged in sexually explicit conversations with children. “Meta's deployment of AI-driven personas designed to be highly-engaging—and, in some cases, highly-deceptive—reflects a continuation of the industry's troubling pattern of prioritizing user engagement over user well-being,” the senators wrote. “Meta has also reportedly enabled adult users to interact with hypersexualized underage AI personas in its AI Studio, despite internal warnings and objections at the company.’”

Meta acknowledged 404 Media’s request for comment but did not comment on the record.




Information Density: Microfilm and Microfiche


Today, we think nothing of sticking thousands of pages of documents on a tiny SD card, or just pushing it out to some cloud service. But for decades, this wasn’t possible. Yet companies still generated huge piles of paper. What could be done? The short answer is: microfilm.

However, the long answer is quite a bit more complicated. Microfilm is, technically, a common case of the more generic microform. A microform is a photographically reduced document on film. A bunch of pages on a reel of film is microfilm. If it is on a flat card — usually the size of an index card — that’s microfiche. On top of that, there were a few other incidental formats. Aperture cards were computer punch cards with a bit of microfilm included. Microcards were like microfiche, but printed on cardboard instead of film.

In its heyday, people used specialized cameras, some made to read fanfold computer printer paper, to create microfilm. There were also computer output devices that could create microfilm directly.

How Did That Happen?


Although microfilm really caught on in the mid-20th century, it is much older than that. John Benjamin Dancer appears to have been the first to reduce documents by about 160:1 using daguerreotypes in 1839. He also used wet collodion plates later, but didn’t see any real point to the work.

However, two astronomers, James Glaisher and John Herschel, did see the value of the technology in the early 1850s. By 1870, carrier pigeons were carrying newspaper pages by microfilm into blockaded Paris during the Franco-Prussian War’s Siege of Paris, thanks to René Dagron. During the relatively short conflict, about 115,000 messages had flown by pigeon.

The technology languished for a while, although Reginald A. Fessenden did suggest in 1896 that engineering documents would be a good thing to microfilm, proposing 150 million words in a square inch of film. In fact, nearly a century later, many electronic vendors made their databooks and application notes available on microfiche.

However, it would be 1920 before we see “modern” microfilm usage. The Checkograph, a device patented in 1925 by George McCarthy (with a US Patent in 1930), let banks store cancelled checks on film. Kodak acquired the device in 1928 and rebranded it Recordak.

As you might expect, big libraries jumped right in. Starting in the late 1920s, libraries including the British Library and the Library of Congress adopted microforms. Kodak started filming The New York Times for distribution, while Harvard University Library started filming foreign newspapers in 1938.

While most uses of microfilm are made to save storage space, it can also help save space for carrying mail, as the military did during World War II.

Alternatives

The Fiske-o-scope. From Scientific American, 1922
There were many less-than-successful attempts to bring microfilm into the hands of readers. Retired Navy Admiral Bradley Allen Fiske created the Fiske-O-Scope. The earliest designs had two eyepieces, but they eventually evolved into a single-eye viewing scope. A roller shifted the eyepiece along the reading material, which, initially, were long sheets of paper. Eventually, the Fiske-O-Scope changed to film.

You can see the Admiral using his device, along with some reading material in the accompanying figure. Although the experience of reading with the Fiske-O-Scope may have left something to be desired, the concept itself was clearly well ahead of its time. Ultimately, it promised to let the user carry their personal library around with them — an idea that arguably wouldn’t truly be realized until the birth of the modern e-reader.

Like many great ideas, there wasn’t a single point where the perfect machine appeared. It was more of a slow ooze. There was clearly a need to compress stored documents. It just needed the right equipment.

Equipment and Film


Early microforms were projected with conventional equipment like a magic lantern or eyeballed with a magnifier. However, modern readers generally project onto the rear of a glass screen. More expensive ones could even print what was on the screen using a photocopier-like mechanism.

The University of Arizona has a video showing how to use a classic reader, which you can watch below. Their fancy reader can handle both microfilm and microfiche.

youtube.com/embed/HxXhLhTHkD0?…

The Hoover Institution Library has a moderately recent video about using their super-modern microfilm reader if you would like to have a peek at how to use one. Note this one uses a computer, so the experience isn’t as authentic as using an old 1960s reader.

youtube.com/embed/yl5QFg29Kmo?…

Film reels tend to be either 16 mm or 35 mm, and some machines could do either. Typically, 35 mm microfilm was the order of the day for large-format scans. Letter-sized material commonly went on 16 mm film. Sometimes the film was on an open reel. Other times, it would be in a cartridge. There were M-type cartridges and ANSI cartridges (and probably others).

Either way, the film could have a single image per frame (simplex) or two images, such as the front and back of a document, per frame. That’s a duplex microfilm.

Some systems used “blips” at the edge of the film to mark when an image starts so that all the pages don’t have to be the same size. Nice machines could count the blips so if someone told you look on “roll 295, frame 952,” you could load the right roll, set the counter to 952, and let the machine fast forward, counting blips, until the counter went to zero and the machine stopped.

Super fancy machines used a double blip to mark the start of a document. This allows you to refer to “roll 295, document 3, frame 80” or — more commonly — to tell the machine to skip to the next document.

Microfiche cards varied somewhat, but were normally very close to 4×6 inches. Jacket versions held strips of film, but specially-made microfiche cards might be just a single sheet of film.

Computer Output Microfilm


The easiest way to create microforms, though, was to have the computer do it directly. Early models displayed data on a CRT, so a camera could snap a picture. By 1977, though, you could get machines that used a laser to directly write on the output medium. COM — Computer Output Microfilm (or Microform) — was widely used, although some mainframe computers sent tapes to service companies to actually make the microfilm.

Kodak Komstar microfiche “printer” (image CC-BY-4.0 by [CERN PhotoLab]Oddly enough, although most mainframes of the era were IBM, they didn’t produce a COM machine. They did make two attempts. In the late 1950s, they developed a tube-based device based on several specialized CRTs. They didn’t market it, but a single unit made it to the Social Security Administration.

IBM’s second attempt at COM was the IBM 1360, but it ultimately didn’t take off, either. It wasn’t exactly a COM output device but a way to store a whopping 128 GB on photographic film cards. There were only six made.

The biggest producer of COM output devices was probably Stromberg Carlson. Kodak was another big name. The Komstar series was made to connect to IBM computers as if they were actual printers. There was also a model made to connect to a magnetic tape drive. These were made well into the 1990s.

Microfilm Today


Most things today are in digital form and a great deal of old microform records are now in digital form, too. However, there was such a flood of microforms that there are still records that you need to find a reader to see them. The Internet Archive, as you might expect, digitizes a lot of microform documents and, if you are watching at the right time, you can look over their shoulder while they do it.

youtube.com/embed/aPg2V5RVh7U?…

Of course, in addition to military mail, extreme microfilm works for spies, too. If you find a cache of microfiche cards, you can always build your own reader.


hackaday.com/2025/06/09/inform…




Turning Up the Heat on HT-PLA’s Marketing


PLA is probably the most-printed filament on the market these days, and is there any wonder? It’s cheap, it’s easy, and it doesn’t poison you (as quickly as its competitors, anyway). What it doesn’t do very well is take the heat. Polymaker’s new HT-PLA formulation promises to solve that, and [My Tech Fun] put those claims to the test in a recent video.

Polymaker claims its HT-PLA is heat-stable up-to 150 C, but still prints as easily as standard PLA at up to 300 mm/s. By “heat stable” they mean able to maintain dimensions and form at that temperature when not under any load, save perhaps its own weight. If you need high-temp mechanical properties, they also offer a glass-fiber infused HT-PLA-GF that they claim is heat resistant up to 110 C (that is, able to withstand load at that temperature) which is hard to sneeze at, considering you you could print it on a stock Ender so long as you tossed a hardened nozzle on it.

Now it’s not a free lunch: to get the very best results, you do need to anneal the parts, which can introduce shrinkage and warping in HT-PLA, but that’s where HT-PLA-GF shines. If you want to see the results of the tests you can jump to 19:27 in the video, but the short version is that this is mechanically like PLA and can take the heat.

The verdict? If you like printing PLA and want to shove something in a hot car, you might want to try HT-PLA. Otherwise, it’s just like PLA. It prints like PLA, it looks like PLA, and when cold it behaves mechanically like PLA, which we suppose was rather what Polymaker was going for. There is no word yet on whether the additives that make it high-temp increase off-gassing or toxicity but since this stuff prints like PLA and can stand a little airflow, it should be easy to ventilate, which might make for fewer trade-offs when building an enclosure.

What do you think, will you be trying HT-PLA anytime soon? Let us know in the comments.

youtube.com/embed/w01XqM7D8b0?…


hackaday.com/2025/06/09/turnin…



Riceviamo e condividiamo:
STOP WAR ON JOURNALISM!
#PardonAssangeNow!

Il 24 giugno 2024 Julian Assange è tornato libero dopo una persecuzione durata ben 14 anni.

Sabrina Web 📎 reshared this.



Feline Genetics and Why Orange Cats Are the Most Special


Recently, butlers to orange-colored cats got a bit of a shock when reading the news, as headlines began to call out their fuzzy feline friends as ‘freaks of nature’ and using similarly uncouth terms. Despite the name-calling, the actual reason for this flurry of feline fascination was more benign — with two teams of scientists independently figuring out the reason why some cats have fur that is orange. Tracking down the reason for this turned out to be far more complicated than assumed, with the fact that about 80% of orange cats are male being only the tip of the cat-shaped iceberg.

It was known to be an X chromosome-linked mutation, but rather than the fur coloring being affected directly, instead the mechanism was deduced to be a suppression of the black-brownish pigmentation (eumelanin) in favor of the orange coloration (pheomelanin). Finding the exact locus of the responsible ‘O gene’ (for orange) in the cat genome has been the challenge for years, which turned out to be a mutation related to the X-linked ARHGAP36 gene, whose altered expression results in the suppression of many melanogenesis genes.

Interestingly, this particular mutation appears to be of a singular origin that apparently persisted over millennia courtesy of the domestication of humans (H. sapiens) by Felis catus.

Furry Patterns


Although F. catus doesn’t have the wide variety of phenotypes that everyone’s favorite canid companions (Canis familiaris) got subjected to after the first grey wolves got cozy with H. sapiens, there is still significant variety among cats. Most of this variety is seen in the fur, with characteristics including coloration, curliness and length varying quite significantly.
European wildcat (F. silvestris). (Credit: Alena Houšková, Wikimedia)European wildcat (F. silvestris). (Credit: Alena Houšková, Wikimedia)
The underlying genetics are relatively straightforward despite the pretty wild number of possible phenotypes. Here we should mind the cautionary note that some phenotypes are the result of inbreeding of recessive genetic defects, such as the hr mutation in the KRT71 (keratin) gene that prevents hair follicles from forming, as found in the so-called Sphynx cats. Due to the amount of inbreeding required to maintain these recessive mutations, such breeds suffer many health issues and a shortened lifespan. Here we will thus only look at healthy F. catus genetics without such inbreeding baggage.

F. catus has the African wildcat (F. lybica) as its direct ancestor, with the European wildcat (F. silvestris) being the other divergent branch. Interestingly, F. silvestris seems to resist domestication more than F. lybica, with the latter being the cat species that the Ancient Egyptians would have kept around. All of these have similar genetics, and thus the wildcats give a good idea of what a ‘wild’ phenotype range looks like. Of note is that these wildcats are generally not orange, unlike many of their brethren in the Pantherinae sub-family of Felidae, like tigers and lions, which is another kettle of genetic fish.

Hair length is determined by the FGF5 gene, which much like in H. sapiens determines for how long a hair grows before it enters the catagen (regression) phase. In e.g. Norwegian Forest Cats as well as Maine Coons the growth cycle is much longer, which gets these breeds a thicker coat, which normally consists out of the typical down, awn and guard hairs.

Fur color is solely determined by melanin, specially the dark & brown eumelanin along with the yellow-reddish pheomelanin, with the amount or absence of each determining the final color. As far as patterns go, it’s likely that the ‘tabby’ coat pattern originates in wildcats, with naturally bred F. catus (‘non-pedigree’) often displaying this pattern.

In order for an orange, generally called ‘red’ or ‘ginger’, coat color to appear, there would thus have be a severe decrease in eumelanin production, with pheomelanin being primarily present. This is effectively the same as in H. sapiens and the ‘ginger’ phenotype with reddish hair and lack of eumelanin pigmentation in the skin.

The problem for genetic scientists was that they did not know exactly why the eumelanin production was being suppressed in favor of pheomelanin, with researchers finally sufficiently narrowing down the location on the X-chromosome through comparative analysis between F. catus DNA to pin-point the location and from there understand the mechanics.

Deleted

Summary of study findings by Hidehiro Toh et al., Current Biology, 2025Summary of study findings by Hidehiro Toh et al., Current Biology, 2025
Both the study by Hidehiro Toh et al. and the study by C.B. Kaelin et al. (BioRxiv) came to the same conclusion, namely that a 5 – 5.1 kilobase (kb) section had been deleted which resulted in a significantly higher expression of ARHGAP36 (Rho GTPase Activating Protein 36). This is likely because the deleted section that normally precedes ARHGAP36 inhibits the expression of this gene.

Normally the production of eumelanin is activated via the following pathway in melanocytes:

  • Melanocortin 1 receptor (Mc1r)
  • cyclic adenosine monophosphate (cAMP)
  • protein kinase A (PKA)

In the case of eumelanin suppression, the affected cats still have this pathway intact, but the increased expression of ARHGAP36 leads to reduced levels of the PKA catalytic subunit (PKAc), thus interrupting this pathway at the final step and preventing the production of eumelanin.
Impact of increased ARHGAP36 expression on melanocyte gene expression. (Credit: Hidehiro Toh et al., Current Biology, 2025)Impact of increased ARHGAP36 expression on melanocyte gene expression. (Credit: Hidehiro Toh et al., Current Biology, 2025)
Although melanin is commonly associated with hair and skin coloring, these neural crest-derived melanocytes have more roles and are considered part of the body’s immune system. Neuromelanin, for example, is a form of melanin that is produced in the brain, though with an unknown function. The ARHGAP36 gene is strongly expressed in neuro-endocrinological tissues, which conceivably may imply a significant role for the normal functioning of melanocytes in this context.

In the case of hair & skin pigmentation, the effect is as we can observe rather striking, with mixed negative and positive health effects based on the effective change in gene expression. Fortunately a drop in IQ is not among the negative outcomes, despite the slander often hurled at orange-coated cats.

Randomly Tortoise

A cat with calico coat pattern. (Credit: Ksmith4f, Wikimedia)A cat with calico coat pattern. (Credit: Ksmith4f, Wikimedia)
The two coat patterns most commonly associated with this orange mutation without being purely orange are the tortoiseshell and calico patterns, which are effectively the same except with white (no pigment, courtesy of the KITgene) present with the latter. This kind of coat pattern is caused by the random inactivation of either of the two X chromosomes in female cats (X-inactivation), where just one of the X chromosomes has the ARHGAP36 mutation.

A female cat can have this mutation on both X chromosomes, but this is far less likely, thus explaining why most orange cats are male, and why calico and tortoiseshell cats are overwhelmingly female.

Although male cats can have a calico or tortoiseshell pattern, this is because they have a genetic (intersex) condition like Klinefelter syndrome (XXY), or chimerism (merged cell lines from two distinct embryos). This rare confluence of factors makes such coat patterns with male cats very rare, at less than one percent.

Most Special of All


From what we can determine based on historical writings and art, and on the similarity of these deletions near the ARHGAP36 gene, this is a mutation that occurred likely once thousands of years ago, and has persisted in F. catus populations ever since. Even if similar mutations were to have occurred in wildcat populations, they are likely to have been heavily selected against. European wildcats are however known to interbreed with feral F. catus, which may introduce such mutations in those populations.

Ultimately these findings mean that orange cats as well as calicos and tortoiseshells are the result of a very special moment in history, when H. sapiens and F. lybica met up and the former saw fit to preserve one of the most unique phenotypes that truly define F. catus as the wildcat who came to conquer our homes and our hearts.


hackaday.com/2025/06/09/feline…




#LosAngeles, brucia la democrazia


altrenotizie.org/primo-piano/1…


Privacy Meta, aggiornamento su informazioni ricevute da terzi: cosa cambia dal 16 giugno


@Informatica (Italy e non Italy 😁)
Dal 16 giugno 2025, Meta attua l'aggiornamento dell’informativa sulla privacy. L'update serve a rendere più chiaro l'utilizzo dei dati raccolti dagli utenti, mentre integra l’intelligenza artificiale



Il Sussurro della Città Silente


Amici miei, devo confessarvi che, sebbene io abbia sempre dieci anni, la mia età è fatta non di primavere, ma di sussurri antichi e di sogni mai svaniti.

E fu proprio un sussurro, flebile come un ricordo quasi dimenticato, a chiamarmi in una mattina che sembrava come tante altre.

Avevo il solito vortice di energie e un desiderio d'avventura che mi pulsava nelle vene. Mi trovavo in una regione poco battuta delle Alpi Marittime, non lontano dal mio amato Viù, ma in un bosco così antico che gli alberi sembravano aver visto il tempo nascere e morire mille volte. Era la “Foresta delle Memorie Perdute”, la chiamavano i pochi valligiani che osavano avventurarsi tra i suoi sentieri intricati.

Quel giorno, però, il richiamo non era visibile né tangibile; era un suono che non era un suono, ma una melodia che vibrava nell'aria. Era un invito, una domanda silenziosa che la mia sete di conoscenza non poteva ignorare. Feci quello che faccio sempre: andai avanti. Il bosco, denso e ombroso, sembrava farsi sempre più silenzioso, quasi stesse trattenendo il respiro. Ogni foglia caduta, ogni rametto spezzato sotto i miei stivali, risuonava con una chiarezza innaturale. Mi sentii più… pesante. Era un po' come la nebbia che mi portò al mio primo passaggio tra i mondi.

Dopo ore di cammino, attraverso rovi e tronchi secolari, la fitta vegetazione si diradò improvvisamente, rivelando uno spettacolo che mi lasciò senza fiato. Non c'era un castello maestoso, né un villaggio incantato. C'erano rovine. Non rovine di una fortezza da cui partire, ma di una città antica, completamente inghiottita dal muschio e dal tempo. Era fatta di pietre grigie, scolpite con simboli che non avevo mai visto, ma che parlavano di storie infinite. E il silenzio... era assoluto. Non un canto d'uccello, non il fruscio di un animale. Sembrava che la città avesse dimenticato come fare rumore.

“Dove sono?” pensai. Era un luogo così estraneo, eppure così familiare, come un sogno che non avevo ancora fatto. Mentre esploravo le vie coperte di vegetazione, notai una strana struttura al centro di ciò che doveva essere stata una piazza. Era una sorta di grande arpa, fatta di cristallo opaco e metallo brunito, con corde sottili che sembravano tessute con ragnatele di luna. Non emanava alcun suono.

Mi avvicinai, la mia curiosità più forte di ogni timore. Le mie avventure mi avevano insegnato che anche le leggende hanno un'anima e che la magia può essere palpabile nell'aria. Con la mano, toccai una delle corde. Era fredda. Niente. Provai con un'altra. Ancora niente. Poi, mi venne un'idea. Io non sono fatto di carne e sangue, ma di pensieri e desideri. Forse, per far risuonare questa “Arpa delle Echi”, dovevo credere abbastanza.

Chiusi gli occhi e mi concentrai. Pensai a tutte le storie che avevo ascoltato, a tutte le avventure che avevo vissuto. Pensai al nonno che leggeva alla luce della lucerna, alla nonna che raccontava storie nel buio. Pensai al Golem che custodiva segreti millenari, alle fate che danzavano tra le luci scintillanti. Pensai a quell'uomo che, incontrandomi, aveva creduto in me.

Fu allora che le corde dell'arpa iniziarono a vibrare. Non con un suono udibile, ma con un'onda che sentii nel cuore. E poi, il silenzio della città si ruppe. Non con un rumore forte, ma con un coro di sussurri. Erano voci lontane, risate di bambini, il tintinnio di attrezzi, un lamento di tristezza, il fruscio di abiti, frammenti di canzoni e discorsi. Era la memoria stessa della città, liberata. Era come se le pareti di pietra fossero imbevute di quelle vite passate.

Capii. Questa non era una città abbandonata perché morta. Era silente perché aspettava un ascoltatore. Aspettava qualcuno che credesse abbastanza da liberare i suoi ricordi. Ogni sussurro era una storia, un pezzo di vita che la città aveva custodito per secoli. Sentii il peso di quella storia. La città era fatta di storie, proprio come me.

Mi sedetti, ascoltando. Ascoltai le vite degli abitanti, i loro amori e le loro paure, le loro gioie e i loro dolori. Mi sentii un custode di quei misteri antichi. Quando le prime luci del pomeriggio iniziarono a filtrare attraverso le rovine, i sussurri si affievolirono, l'arpa di cristallo tornò silenziosa. La città era tornata al suo riposo, ma non era più muta per me.

Mi alzai, il cuore colmo di nuove esperienze. La Foresta delle Memorie Perdute non era più solo un bosco. Era la custode di una città che viveva attraverso i suoi echi, e io ero diventato il suo testimone.
Quando tornai sui miei passi, il sentiero mi sembrò diverso, come se la magia lo avesse trasformato. Sapevo che, pur non avendo portato con me oro o gioielli, avevo trovato un tesoro ben più prezioso: le voci di un mondo dimenticato. E ora, quella storia, quei sussurri, erano dentro di me, pronti per essere raccontati e condivisi con chiunque avesse il coraggio di credere.

Tenete gli occhi aperti, amici miei. A volte, le storie più belle sono quelle che non fanno rumore, ma che sussurrano nel cuore di chi sa ascoltare. E quando la nebbia arriva, o un sussurro chiama, Bigoulin potrebbe essere vicino.



rispetto le idee altrui, ma non chi sfrutta un sistema elettorale mal fatto che privilegia la scorrettezza per assumere un vantaggio di parte illegittimo. su questo sono irremovibile.


Verso il vertice Nato. 5 o 3,5%? I numeri sulla Difesa

@Notizie dall'Italia e dal mondo

De bello ucraino, ovvero come il racconto su quella guerra si intreccia giocoforza con le strategie, future e presenti, di Nato e Ue. Mentre sono iniziate le esercitazioni Nato ‘Baltops 25’ nella regione del mar Baltico che si concluderanno il prossimo 20 giugno (con 40 navi, 25 aerei e 9.000 soldati) si apre la



Il J-36 esce dall’ombra. Nuove informazioni sul super aereo cinese

@Notizie dall'Italia e dal mondo

In un mondo dominato dalle guerre d’informazione e dalla diplomazia della tecnologia, un’apparentemente semplice fotografia può valere un segreto militare cruciale. È il caso della nuova immagine del presunto J‑36, il caccia stealth pesante di sesta generazione sviluppato dalla Cina, comparsa di recente online



Phone numbers are a goldmine for SIM swappers. A researcher found how to get this precious piece of information from any Google account.#wired #News


A Researcher Figured Out How to Reveal Any Phone Number Linked to a Google Account


This article was produced with support from WIRED.

A cybersecurity researcher was able to figure out the phone number linked to any Google account, information that is usually not public and is often sensitive, according to the researcher, Google, and 404 Media’s own tests.

The issue has since been fixed but at the time presented a privacy issue in which even hackers with relatively few resources could have brute forced their way to peoples’ personal information.

“I think this exploit is pretty bad since it's basically a gold mine for SIM swappers,” the independent security researcher who found the issue, who goes by the handle brutecat, wrote in an email. SIM swappers are hackers who take over a target's phone number in order to receive their calls and texts, which in turn can let them break into all manner of accounts.

In mid-April, we provided brutecat with one of our personal Gmail addresses in order to test the vulnerability. About six hours later, brutecat replied with the correct and full phone number linked to that account.

“Essentially, it's bruting the number,” brutecat said of their process. Brute forcing is when a hacker rapidly tries different combinations of digits or characters until finding the ones they’re after. Typically that’s in the context of finding someone’s password, but here brutecat is doing something similar to determine a Google user’s phone number.

Upgrade to continue reading


Become a paid member to get access to all premium content
Upgrade




Local police, state authorities, DHS, and the military all flew aircraft over the Los Angeles protests this weekend, according to flight path data.#News
#News


I governanti di Tel Aviv lo avevano detto “bloccheremo la nave dei selfie” insultando così la piccola imbarcazione Madleen, della Freedom Flottilla che, con 12 pacifisti disarmati, ha cercato di portare aiuti a Gaza. La nave è stata fermata in acque internazionali, attaccata con gas urticanti, i suoi contatti col mondo sono stati disattivati. Un’operazione [...]


#NotiziePerLaScuola
È disponibile il nuovo numero della newsletter del Ministero dell’Istruzione e del Merito.
🔶 #Maturità2025, online le commissioni d'Esame. Saranno 524.


#NoiSiamoLeScuole questa settimana è dedicato all’IC “Achille Pace” e all’IIS “Ettore Majorana” di Termoli (CB), al Liceo scientifico dell’Istituto Omnicomprensivo “Mattioli-D’Acquisto” di San Salvo (CH) e all’IIS “Alessandrini” di Montesilvano (PE),…


Se avete dei dubbi sugli #EsamidiStato2025, scriveteci nei commenti le vostre domande e nei prossimi giorni pubblicheremo le risposte!

Continuate a seguirci per aggiornamenti sulla #Maturità2025 e taggateci nei vostri post e nelle vostre stories con…



🌱Il #5giugno si celebra la Giornata Mondiale dell’Ambiente, istituita nel 1972 dall’Assemblea Generale delle Nazioni Unite per sensibilizzare sui temi della salvaguardia del nostro ambiente naturale.


📚Vi state preparando agli #EsamidiStato2025?
🗓️Qui trovate le date da segnare sul calendario!

Continuate a seguirci per aggiornamenti sulla #Maturità2025 e taggateci nei vostri post e nelle vostre stories con l’hashtag #MIMaturo.



Difesa, l’industria necessaria

@Politica interna, europea e internazionale

9 GIUGNO 2025, ORE 11:00, FONDAZIONE LUIGI EINAUDI, Via della Conciliazione 10, Roma Interverranno Prof. Alberto Pagani, illustrazione del paper “Difesa, l’industria necessaria” Alessandra Ghisleri, esposizione del sondaggio “Gli italianie la Difesa” Si confronteranno On. Guido Crosetto, Ministro della Difesa On. Lorenzo Guerini, Presidente





putin pensa che peggio di così non possa andare, ma sta ignorando gli scenari peggiori, che non sono del tutto impossibili. alla fine chi perde una guerra subisce quello che non avrebbe mai accettato o preventivato. si ritiri finché può conservare una parvenza di qualcosa. è quasi un consiglio amichevole.


penso che putin avrebbe fatto bene a tenersi gli ucraini come amici (e non come succubi). fortuna che sono per noi alleati. in questo momento avrei più paura dell'ucraina che della russia. poco contano atomiche rispetto alla capacità di pianificazione superiore. la strategia di putin è sempre e una sola. tirare missili a caso e cercare di spaventare, pure nella sua guerra asimmetrica contro l'europa. gli ucraini, sono precisi, pazienti, metodici, un vantaggio strategico importante. e il modo con cui si sono adattati in questi 3 anni di guerra è qualcosa di fenomenale. c'è da imparare per tutti dagli ucraini. non sosterremo mai l'ucraina abbastanza per tutto quello che srta facendo per l'europa. certo difendono il loro culo. ma anche il nostro. la reazione di putin a tutto questo? bombe sui civili. sai che noviità... che poi sul piano militare colpire civili è inutile.


Davide contro Golia: il mostro è stato abbattuto.


@Privacy Pride
Il post completo di Christian Bernieri è sul suo blog: garantepiracy.it/blog/davidego…
Golia (lo IAB) è un mostro gigantesco che si nutre di impunità, di "too big to fail", di rassegnazione perché tanto "lo fanno tutti" e di "è lo standard di mercato" ed è costantemente rinvigorito da "ma tanto sanno già tutto di noi". Ultimamente, leggendo

reshared this



La Danimarca promuoverà la limitazione dell’accesso dei minori ai social media in un vertice con i ministri dell’UE

L'articolo proviene da #Euractiv Italia ed è stato ricondiviso sulla comunità Lemmy @Intelligenza Artificiale
La Danimarca, che assumerà la presidenza di turno del Consiglio dell’UE il 1° luglio, intende

Chris reshared this.



Perché c’è casino sullo Spid

L'articolo proviene da #StartMag e viene ricondiviso sulla comunità Lemmy @Informatica (Italy e non Italy 😁)
I 40 milioni che l'esecutivo aveva promesso ai gestori per il mantenimento dello Spid, servizio che per le parti private si è rivelato ben poco profittevole, sono rimasti incagliati. Aruba e Infocert hanno iniziato a rivalersi sui propri utenti. Il governo non vuole mantenere

in reply to Informa Pirata

C'è anche da dire che il governo (lungi da me difenderlo) ha da tempo annunciato la dismissione dello spid in favore della CIE


MERGE-it 2025, a Verona la conferenza delle comunità per le libertà digitali in Italia - Ecco il comunicato stampa

@GNU/Linux Italia

La quarta edizione della conferenza @MERGE-it, l'incontro biennale delle comunità italiane per le libertà digitali, che riunisce associazioni, gruppi informali, aziende, professionisti e pubbliche amministrazioni, torna a Verona dal 20 al 22 giugno 2025, nella sede di 311 Verona, presso la Fondazione Edulife.

L'evento è senza scopo di lucro, ad accesso gratuito ed aperto a tutti. Ci sarà un rinfresco sia di venerdì che di sabato da poter prenotare online registrandosi con un apposito biglietto online (sempre gratuito).

Il programma e la registrazione e l'indirizzo sono disponibili sul sito Merge-IT

L’evento prevede oltre 25 speaker, una tavola rotonda, momenti di scambio di idee e dialogo fra le diverse associazioni e organizzazioni che promuovono le libertà e la sovranità digitale. Sarà un'occasione per incontrarsi, discutere, confrontarsi e creare connessioni attorno al software libero, l'open source, gli standard aperti, i dati aperti e, più in generale, una tecnologia etica grazie alle licenze copyright "libere" e alla cultura libera.

“In Italia si parla ancora troppo poco di sovranità digitale, di indipendenza dalle big tech e di come il software libero e gli standard aperti siano uno strumento decisivo per raggiungerla. Per questo ho molto apprezzato la scelta di focalizzare l'edizione 2025 di MERGE-it su questo argomento e sarò lieto di raccontare quello che sta succedendo a Bruxelles e in altri paesi europei”
Ha commentato il relatore sul tema "EuroStack", Vittorio Bertola, Head of Policy & Innovation di Open-Xchange.

Alcune delle presentazioni:

Modelli di sviluppo sostenibili per videogiochi didattici (con Luanti)
L'uso di Wikidata per analizzare dati pubblici, come la lista dei cardinali del conclave
I 20 anni di Open Document Format (ODF), il formato standard aperto ISO/IEC
L'anteprima del sistema operativo italiano Ufficio Zero Linux OS Educational
L'esperienza del Südtirol nel rilascio di dati aperti per il trasporto pubblico
Costruire l'alternativa alle big tech con EuroStack
I 25 anni della conferenza Linux Day in Italia
Si parlerà anche di Mastodon e del "fediverso", la rete di social network più etica, più sostenibile, decentralizzata e senza pubblicità, anche per quanto riguarda le pubbliche amministrazioni.

L'organizzazione della conferenza MERGE-it nasce dalla collaborazione tra le comunità per le libertà digitali in Italia. L'approccio adottato è quello della "do-ocracy", tipico del mondo open source, dove sono i partecipanti stessi a prendere le decisioni sulla base di ciò che è possibile fare individualmente, con un confronto pubblico, continuo e trasparente sulle attività.

L'evento è finanziato grazie alle donazioni delle organizzazioni partecipanti, fra cui con il contributo di Wikimedia Italia, Italian Linux Society e Fondazione Edulife.

Contatti Stampa
Telefono: +39 348 702 7731 (Valerio Bozzolan - referente - SMS o chiamata)
Email: info@merge-it.net
Sito Web: merge-it.net/2025/
Chat: t.me/mergeit_official
Account social su Mastodon: @MERGE-it

#mergeit2025 #mergeit25 #mergeit

merge-it.net/2025/press-kit/



Workshop di attivazione sindacale nel settore informatico. Incontro alla Casa del Parco in Caffarella il 12 giugno dalle ore 19

Nel tuo luogo di lavoro non c'è rappresentanza sindacale? Sai come attivarla?

Non sai qual è la differenza tra RSA e RSU?

Lo sapevi che hai diritto a ore retribuite per fare assemblea sindacale?

Il 12 giugno dalle ore 19 alla Casa del Parco in Caffarella si terrà il primo appuntamento formativo organizzato da @Tech Workers Coalition Italia (TWC) Roma, sezione cittadina dell'organizzazione internazionale alt-labour che si propone di migliorare le condizioni delle lavoratrici e dei lavoratori del settore tecnologico.

Siamo programmatori, ingegneri, sistemisti, grafici, copywriter, analisti software. Insieme possiamo cambiare il modo in cui (non) funziona l'industria tecnologica. Abbiamo questioni importanti da affrontare come body rental e partite Iva, smart working e orari di lavoro, adeguamenti all'inflazione e gender pay gap, ruolo delle Rsu e Rsa, diritto alla disconnessione e reperibilità, rinnovi contrattuali nazionali (Ccnl) e aziendali, vertenze in corso, presidi e scioperi.

Lavoriamo tutti i giorni con la tecnologia, possiamo quindi anche utilizzarla per coordinarci e organizzarci. L'appuntamento di formazione sindacale sarà un'occasione per conoscerci, parlare dei problemi e acquisire competenze sui nostri diritti per migliorare la nostra condizione lavorativa.

Ci vediamo il 12 giugno dalle ore 19 alla Casa del Parco in Caffarella!

E' raggiungibile a piedi dalla Metro A fermata Colli Albani.

mobilizon.it/events/96281ddd-e…


Workshop di attivazione sindacale nel settore informatico
Inizia: Giovedì Giugno 12, 2025 @ 7:00 PM GMT+02:00 (Europe/Rome)
Finisce: Giovedì Giugno 12, 2025 @ 9:30 PM GMT+02:00 (Europe/Rome)

Nel tuo luogo di lavoro non c'è rappresentanza sindacale? Sai come attivarla?

Non sai qual è la differenza tra RSA e RSU?

Lo sapevi che hai diritto a ore retribuite per fare assemblea sindacale?

Il 12 giugno dalle ore 19 alla Casa del Parco in Caffarella si terrà il primo appuntamento formativo organizzato da Tech Workers Coalition (TWC) Roma, sezione cittadina dell'organizzazione internazionale alt-labour che si propone di migliorare le condizioni delle lavoratrici e dei lavoratori del settore tecnologico.

Siamo programmatori, ingegneri, sistemisti, grafici, copywriter, analisti software. Insieme possiamo cambiare il modo in cui (non) funziona l'industria tecnologica. Abbiamo questioni importanti da affrontare come body rental e partite Iva, smart working e orari di lavoro, adeguamenti all'inflazione e gender pay gap, ruolo delle Rsu e Rsa, diritto alla disconnessione e reperibilità, rinnovi contrattuali nazionali (Ccnl) e aziendali, vertenze in corso, presidi e scioperi.

Lavoriamo tutti i giorni con la tecnologia, possiamo quindi anche utilizzarla per coordinarci e organizzarci. L'appuntamento di formazione sindacale sarà un'occasione per conoscerci, parlare dei problemi e acquisire competenze sui nostri diritti per migliorare la nostra condizione lavorativa.

Ci vediamo il 12 giugno dalle ore 19 alla Casa del Parco in Caffarella!

E' raggiungibile a piedi dalla Metro A fermata Colli Albani.

Unisciti al gruppo telegram


reshared this



che uomo trump. forte e virile. non come le mozzarelle dei democratici. ma come le donne repubblicane, pure loro forti e virili. o le donne del movimento maga. ancora più virili. e gli uomini? beh, non basta trump? trump: e sai cosa bevi: eletto con 100% voti certificati musk.


ogni giorno che passa, trump e putin sono sempre più sovrapponibili... questo è il frutto avvelenato di una "democrazia" morente, che ha perso i propri valori? pur di far "rinascere gli usa" va anche bene una dittatura? ma quale era l'ideale di partenza? la libertà? che fine ha fatto? è un po' come partire e dimenticare dove si sta andando. si finisce a girare in tondo confusi, come trump. l'america grande? non pare. l'america militarista? già qua ci siamo di più. niente valori. solo violenza.



Taj Mahal & Keb Mo – Room On The Porch
freezonemagazine.com/articoli/…
Qualche tempo fa Taj Mahal ebbe a dichiarare: “Se si toglie l’impronta africana dalla musica occidentale degli ultimi 500 anni, non rimane quasi nulla… ci stiamo solo collegando con la musica dei nostri antenati”. La veridicità di questa affermazione potrebbe essere da confutare, ma è indubbio che vi sia una buone dose di verità. Perchè […]
L'articolo Taj Mahal & Keb Mo – Room On


Il nostro voto può salvare la vita di tanti lavoratori vittime di appalti selvaggi: pensateci e andate ai seggi

globalist.it/economy/2025/06/0…

Pensiamo un istante. E riflettiamo sul fatto che un voto potrebbe salvare la vita a moltissime persone.


#Trump e #Musk, il Giano bifronte


altrenotizie.org/primo-piano/1…


Che cosa sta combinando Musk con Neuralink e XChat?

L'articolo proviene da #StartMag e viene ricondiviso sulla comunità Lemmy @Informatica (Italy e non Italy 😁)
Tornato a tempo pieno ai suoi affari dopo essersi prestato alla politica, Elon Musk promette di lanciare nei prossimi giorni XChat, una specie di WhatsApp su X, e raccoglie 650 milioni con la sua azienda di chip cerebrali



LIVE. Israele attacca la nave della Freedom Flotilla in acque internazionali


@Notizie dall'Italia e dal mondo
La Madleen è stata intercettata poco prima della mezzanotte di domenica. I militati israeliani sono saliti sull'imbarcazione, hanno sequestrato il carico e l'equipaggio e sono ora diretti verso il porto di Ashdod, in Israele
L'articolo LIVE. Israele



Podcast di Barbero cercansi


Sono un fan dello storico Alessandro Barbero, avevo sottoscritto 2 suoi podcast ma ultimamente uno è finito (quello di Intesa S. Paolo) e l'altro rimanda sempre gli stessi da mesi e mesi.

Ce n'è anche un terzo ma è sponsorizzato e il volume dello sponsor è più alto del volume della conferenza, cosa che mi dà molto fastidio.

Avete qualche podcast da consigliarmi? Uso AntennaPod e non riesco a trovarne altri.

#Barbero

reshared this



Dalla Newsletter di Haaretz


Hamas' leadership is leaning toward continuing its war with Israel to avert its own collapse, a Palestinian source familiar with the cease-fire negotiations in Qatar told Haaretz, adding that Hamas understands that it must choose whether to surrender or continue to fight at the price of hundreds, if not thousands, more Palestinian lives.

Quella povera gente è tra l'incudine e il martello.