Lolita Lobosco e la sua capacità di affascinare grazie alla scrittura luminosa di chi l’ha creata
@Giornalismo e disordine informativo
articolo21.org/2025/08/lolita-…
Nell’epoca buia delle narrazioni sghembe, dove troppo spesso le storie si piegano
Mauro andante con moto likes this.
I, 3D Printer
Like many of us, [Ben] has too many 3D printers. What do you do with the old ones? In his case, he converted it into a robotic camera rig. See the results, including footage from the robot, in the video below. In addition to taking smooth video, the robot can spin around to take photos for photogrammetry.
In fact, the whole thing started with an idea of building a photogrammetry rig. That project didn’t go as well as planned, but it did lead to this interesting project.
Motion control used to be exotic, but 3D printers really put it in the mainstream. The printer has motors, lead screws, gears, and belts. Of course, there are plenty of 3D printed parts, too. He did buy a few new pieces of extrusion and some longer belts. In addition, he had to upgrade one stepper to one that uses gears.
The camera tilts plus or minus 90 degrees on what used to be the X axis. The Y axis moves the camera forward and backward. The Z axis still moves up and down, but the extruder motor has a new job.
The extruder motor rotates the target object. Originally, the plan was to spin the camera, but that was difficult since the ring is 18 inches across. In addition to reliably moving it, there’s the wire management to worry about, too. So even though the original plan was to rotate the camera, the final project rotates the object on a turntable.
After prototyping with the 3D printer, he had an outside service CNC many of the parts in metal, both for the appearance and for the rigidity. But we imagine it would be fine with good-quality 3D printed parts.
Overall, a nice way to upcycle an old printer. We didn’t see the design files for any of the parts, but you’d probably have to customize your approach anyway. We’ve seen plenty of these camera rigs. Some of them recycle other tech.
youtube.com/embed/Qk4X3khyoXI?…
Reintegrati gli agenti che hanno ucciso Federico Aldovrandi. La frasi del padre
@Giornalismo e disordine informativo
articolo21.org/2025/08/reinteg…
I quattro agenti condannati per la morte di Federico Aldovrandi, il ragazzo di 18 anni bloccato, manganellato e soffocato il 25 settembre
2025 One Hertz Challenge: Timekeeping at One Becquerel
The Becquerel (Bq) is an SI unit of radioactivity: one becquerel is equivalent to one radioactive decay per second. That absolutely does not make it equivalent to one hertz — the random nature of radioactive decay means you’ll never get one pulse every second — but it does make it interesting. [mihai.cuciuc] certainly thought so, when he endeavored to create a clock that would tick at one becquerel.
The result is an interesting version of a Vetinari Clock, first conceived of by [Terry Pratchett] in his Discworld books. In the books, the irregular tick of the clock is used by Lord Vetinari as a form of psychological torture. For some reason, imposing this torture on ourselves has long been popular amongst hackers.
Without an impractical amount of shielding, any one-becquerel source would be swamped by background radiation, so [mihai] had to get creative. Luckily, he is the creator of the Pomelo gamma-ray spectroscope, which allowed him to be discriminating. He’s using an Am-241 source, but just looking for the characteristic 59.5 KeV gamma rays was not going to cut it at such a low count rate. Instead he’s using two of the Pomelo solid-state scintillation as a coincidence detector, with one tuned for the Am-241’s alpha emissions. When both detectors go off simultaneously, that counts as an event and triggers the clock to tick.
How he got exactly one becquerel of activity is a clever hack, too. The Am-241 source he has is far more active than one decay per second, but by varying the distance from the gamma detector he was able to cut down to one detection per second using the inverse square law and the shielding provided by Earth’s atmosphere. The result is a time signal that is a stable one hertz… if averaged over a long enough period. For now, anyway. As the Am-241 decays away, its activity decreases, and [mihai] admits the clock loses about 0.4 seconds per day.
While we won’t be giving the prize for accuracy in this contest, we are sure Lord Vetinari would be proud. The Geiger-counter sound effect you can hear in the demo video embedded below is great touch. It absolutely increases the psychic damage this cursed object inflicts.
youtube.com/embed/x_zuBJ4F6ZQ?…
Tuesday: Oppose Police Social Media Surveillance
Boston Police (BPD) continue their efforts rollout more surveillance tools. This time on social media.
Tuesday, August 19th, the Boston Public Safety Committee will hold a hearing on the Boston 2024 Surveillance Technology Report including police usage of three new tools to monitor social media posts. Any tool BPD uses will feed into the Boston Regional Information Center (BRIC) and Federal agencies such as ICE, CBP and the FBI.
If you want to tell the Boston Public Safety committee to oppose this expansion of surveillance, please show up on the 19th virtually. Details are posted, but to sign up to speak, email ccc.ps@boston.gov and they will send you a video conference link. We especially encourage Boston Pirates to attend and speak against this proposal. The Docket # is 1357.
Enzo Baldoni – Il prezzo della verità
@Giornalismo e disordine informativo
articolo21.org/2025/08/enzo-ba…
Venerdì 20 agosto 2004. Il giornalista Enzo Baldoni scompare in Iraq, insieme al suo autista, accompagnatore ed interprete Garib. Viene rapito dall’Esercito islamico dell’Iraq, una sedicente organizzazione fondamentalista musulmana ritenuta genericamente legata
Perché l’attentato alla villa di Pippo Baudo rientra nella strategia terroristico-mafiosa di quegli anni
@Giornalismo e disordine informativo
articolo21.org/2025/08/perche-…
E’ arrivato il momento di riconsiderare il significato
Effetto boomerang: così i dazi Usa colpiscono duro i consumatori americani
Le famiglie statunitensi si trovano ora ad affrontare rincari sostanziali che gravano sui loro bilanci molto più pesantemente di quanto avvenga nei Paesi che i…Villy de Luca (HuffPost Italia)
like this
reshared this
How Laser Headlights Died In The US
Automotive headlights started out burning acetylene, before regular electric lightbulbs made them obsolete. In due time, halogen bulbs took over, before the industry began to explore even newer technologies like HID lamps for greater brightness. Laser headlights stood as the next leap forward, promising greater visibility and better light distribution.
Only, the fairytale didn’t last. Just over a decade after laser headlights hit the market, they’re already being abandoned by the manufacturers that brought them to fruition. Laser headlights would end up fighting with one hand behind their back, and ultimately became irrelevant before they ever became the norm.
Bright Lights
Laser headlights were first announced by BMW in 2013, with the German company promising the technology would be available on its new halo car, the i8. Fellow German rivals Audi would end up pipping the Bavarians to the punch, launching the limited-production Audi R8 LMX with laser headlights just months before the i8 entered production. Both brands would later bring the technology to a range of luxury models, including sedans and SUVs.Long-throw laser lights became an option on premium Audi and BMW vehicles. Credit: Audi
The prime selling point of laser headlights was that they could project a very bright, very focused beam a long way down the road. As we’ve explored previously, they achieved this by using blue lasers to illuminate yellow phosphors, creating a vibrant white light that could be bounced off a reflector and directed up to 600 m ahead of the vehicle. They weren’t so useful for low-beams, with that duty usually passed off to LEDs. However, they were perfect to serve as an ultra-efficient long-throw high beam that wouldn’t disrupt other road users, albeit with the aid of steerable headlamp assemblies and camera-based tracking systems.
Laser headlights were more expensive to produce, but were also far more capable than any conventional bulb in terms of throw distance. They were also more compact than just about any other automotive lighting technology, giving automotive designers far more freedom when creating a car’s front end. They were even able to outperform LEDs in the efficiency stakes. And yet, both Audi and BMW would come to abandon the technology.A comparison from 2014 between BMW’s LED high beam (left) and laser high beam (right). Notice the far greater throw of the laser high beam. Credit: BMW
The culprit? Regulations. In particular, headlight rules enforced in the United States. The Federal Motor Vehicle Safety Standard rule 108 deems that headlight intensity must not exceed 150,000 candela, while beam range must not exceed 250 meters. These rules effectively mean that laser headlights can’t outperform older technologies without falling afoul of US regulations. The rules stand in stark contrast to European regulations, which allow headlights to reach up to 430,000 candela. In an echo of the sealed beam era, US regulations were once again stymying European innovation by being firmly stuck in the past.
Of course, US regulations don’t apply everywhere. European automakers could have kept pursuing laser headlight technology, however, other factors have also come into play. LED headlight technology has continued to improve, with newer models improving brightness and light distribution. Adaptive matrix LED headlights also allow sections of the headlight beam to be turned on and off at will to provide the best illumination without dazzling other road users.It’s widely considered that Audi beat BMW to market with the laser headlights on the limited-edition R8 LMX, but BMW was the first to enter real series production with laser headlights on the i8. Credit: BMW
To that end, laser headlights are facing decline. While a few models in the Audi and BMW lineups still feature the headlights, both automakers are phasing them out for the future. Speaking on the matter last year, BMW’s large-car product manager, Andreas Suhrer, noted that solely LED-based designs were the future. “At the moment, we still have laser lighting on the G26 and the X7, but we don’t have future plans,” Suhrer stated. “The G60 and G61 do not have it, and the new 7 Series does not have it. I don’t think it’s completely done, but for the next models, we are making the LED Matrix lights our focus. The laser lights are pretty good with absolute range but the latest generation of Matrix LED lights does a better distribution.” Meanwhile, Audi released statements in 2024 noting that there were no plans to implement laser lighting modules in future product.
Ultimately, laser headlights were an expensive, fancy solution to a minor problem. Better high beams are surely a good thing, but given how rarely most motorists use them, they’re hardly a critical feature. Combine their high price and limited usability with the fact that one of the world’s largest car markets just made them useless, and it hardly made sense for Audi or BMW to continue pursuing this unique technology. They will go down as a luxury car curio, to be written about by bloggers every few decades as a reminder of what was once deemed cutting edge.
Should You Try Printing with Polypropylene?
Of all the plastics that surround us on the daily, the one we hear least about in the 3D printing world is probably polypropylene (PP). Given that this tough, slightly flexible thermoplastic has characteristics you might want for your prints, the question is: why? [Lost in Tech] is not answering that question in a recent video; instead he’s showing us what we’re missing out on with a review of the material.
A look at the Material Safety Data Sheet and available material has [Lost in Tech] suggesting it won’t be (much) more toxic for you than PLA, but you still wouldn’t want to huff the fumes. The biggest issue printing PP is getting it to stick — glass beds and PEI are not your friend, but polypropylene tape is easy to find and makes a fine print surface. He reviews a few other options, but it looks like plain old tape is still your best bet if you can’t get a hold of a Prusa PP bed. The other big issue is shrinkage, but that’s hardly unique to PP and can be accounted for in the model.
Just because it can be used, that doesn’t mean it should be. [Lost in Tech] does make a good case for why you might want to use PP — for one thing, it doesn’t string much, in part because it’s not hygroscopic. That makes it great for those of us in humid climes who don’t want to always faff around with dry boxes, but also wonderful for parts that will be in touch with water. Polypropylene also has great chemical resistance for even scarier chemicals than dihydrogen monoxide. The “killer app” though, at least as far as [Lost in Tech] is concerned, is to use polypropylene with compliant mechanisms: it’s incredibly resilient to bending, and doesn’t fatigue easily. You might even call it a “flexible” filament, but unlike with TPU, you get a nice hard plastic to go with that flexibility.
If you’re interested in this somewhat-forgotten filament, we featured a “getting started” guide last year. You can even make your own polypropylene filament using non-medical “COVID” masks, but do be sure to wash them first. What do you think? Is it time to give PP another chance, or has the 3D printing world moved on?
youtube.com/embed/yN09iY9OXlc?…
Non trovi la tua Tesla? Nessun problema: c’è Free TeslaMate
Un ricercatore esperto in sicurezza informatica ha scoperto che centinaia di server TeslaMate in tutto il mondo trasmettono apertamente i dati dei veicoli Tesla senza alcuna protezione. Ciò significa che la telemetria delle auto – dalle coordinate precise e dai percorsi alle abitudini dei proprietari e persino ai programmi di ricarica – è stata esposta al pubblico.
TeslaMate è un popolare strumento open source che si connette all’API ufficiale Tesla e raccoglie le informazioni più dettagliate sull’auto. Il sistema registra i dati GPS, lo stato della batteria, la cronologia dei viaggi, le letture della temperatura dell’abitacolo e altri parametri. Per visualizzare le statistiche, viene utilizzata una combinazione di un’interfaccia web sulla porta 4000 e un pannello Grafana sulla porta 3000. Tuttavia, per impostazione predefinita, l’applicazione non richiede autenticazione ed è automaticamente collegata a tutte le interfacce di rete. Se avviata su un server con IP pubblico, tutte le informazioni diventano disponibili a qualsiasi utente della rete.
Utilizzando una scansione globale degli indirizzi IPv4 sulla porta aperta 4000, il ricercatore ha individuato circa 900 installazioni di questo tipo in diversi continenti. Di conseguenza, gli estranei avevano accesso ai percorsi esatti dei proprietari, alle coordinate delle auto parcheggiate, agli indirizzi residenziali e ai dati relativi all’assenza delle auto dalle loro posizioni abituali.
Grazie ai dati raccolti, è stato possibile tracciare un quadro completo della vita quotidiana dei proprietari e persino identificare i periodi di vacanza. Ciò che è particolarmente allarmante è che, grazie a questi dati, i criminali possono pianificare furti o effrazioni in anticipo, sapendo quando i proprietari sono assenti.
Per dimostrare la portata del problema, il ricercatore ha lanciato il sito web teslamap.io , che mappa tutte le auto trovate connesse a server TeslaMate non protetti. In alcune regioni, in particolare nelle aree metropolitane di Nord America, Europa e Asia, questi formano dei cluster, poiché contengono numerose installazioni non protette.
Gli esperti raccomandano di adottare misure di protezione immediate. Come minimo, utilizzare un reverse proxy (ad esempio, Nginx) con password, limitare l’accesso solo tramite localhost, impostare regole firewall corrette, modificare le credenziali predefinite di Grafana e, se possibile, bloccare l’accesso al pannello tramite VPN.
Gli sviluppatori di TeslaMate hanno confermato il problema e promesso di introdurre l’autenticazione integrata “di default” nelle versioni future. Tuttavia, mentre centinaia di installazioni continuano a funzionare senza protezione, i dati riservati sulle auto rimangono di pubblico dominio. Ciò evidenzia la rilevanza del problema delle fughe di dati nella realtà moderna.
L'articolo Non trovi la tua Tesla? Nessun problema: c’è Free TeslaMate proviene da il blog della sicurezza informatica.
LAPD lies about attack on reporters
Dear Friend of Press Freedom,
It’s the 143rd day that Rümeysa Öztürk is facing deportation by the United States government for writing an op-ed it didn’t like, and the 62nd day that Mario Guevara has been imprisoned for covering a protest. After more than two months in detention, press freedom groups are again demanding Guevara’s immediate release. Read on for more, and click here to subscribe to our other newsletters.
LAPD lies about attack on reporters
Last Friday, officers from the Los Angeles Police Department wantonly violated a court order by assaulting, detaining, and jailing journalists covering a protest.
Then, the LAPD falsely told California station KABC-TV that two people were detained at the protest for “pretending to be media.” The two were, in fact, journalists, but you wouldn’t know it from KABC-TV’s report, which uncritically parroted the LAPD’s claims.
Journalists must be skeptical of LAPD statements about its treatment of the press. The department knows that it violates the First Amendment and California law to detain or interfere with journalists covering protests, but it does it anyway. It won’t stop until the press reports accurately on all of the LAPD’s abuses, and the public makes clear that it won’t stand for them.
Israel kills journalists in Gaza to silence reporting
Two weeks ago, the Committee to Protect Journalists reported on the Israeli Defense Forces’ threats to Anas al-Sharif, meant to scare him into ceasing reporting. He didn’t, and now he’s dead.
Al-Sharif was one of four Al Jazeera staff correspondents and two freelancers killed by the IDF in an Aug. 10 targeted strike. The others were Mohammed Qreiqeh, Ibrahim Zaher, Mohammed Noufal, Moamen Aliwa, and Mohammad al-Khaldi.
“Israel is killing journalists for exposing its atrocities in Gaza,” said Freedom of the Press Foundation (FPF) director of advocacy Seth Stern. “We can’t let our leaders get away with mere performative condemnations while the money and weapons Israel uses to exterminate journalists and other civilians keep flowing.”
Two years since ‘a massive failure’ of the justice system in Kansas
This week marked two years since the shocking police raid on the Marion County Record and the death of Record co-owner Joan Meyer, who passed away the day after the raid.
FPF spoke to investigative journalist Jessica McMaster, whose award-winning coverage of the raid for KSHB-TV in Kansas City, Missouri, had us glued to her social media feed for weeks.
“This was a massive failure by several people within the justice system,” McMaster said, speaking about the raid. “I think it’s hard for a lot of us to grasp that so many people, in positions of power, failed in such spectacular fashion to do their jobs.”
How a climate change researcher makes FOIA work
Rachel Santarsiero, director of the Climate Change Transparency Project at the National Security Archive, knows how to use the Freedom of Information Act to uncover information the government would rather keep secret. This week, FPF’s Daniel Ellsberg Chair on Government Secrecy Lauren Harper spoke to Santarsiero, who shared her expert FOIA tips.
“The key with any agency is sending targeted requests asking for specific types of documents, a date range, and the office or official who would’ve been responsible for the records,” Santarsiero explained.
Santarsiero also recommends that requesters build relationships with FOIA officers, always appeal denials, and check federal website reading rooms and other publicly available source materials. “You’ll be surprised what you can find hiding in plain sight,” she said.
Read the whole interview here.
What we’re reading
Eyewitness to Gaza’s death traps: Whistleblower Anthony Aguilar in conversation with Defending Rights & Dissent (Defending Rights & Dissent). With journalists being killed or shut out in Gaza, whistleblowers are even more important. Watch Anthony Aguilar’s firsthand account of blowing the whistle on the Gaza Humanitarian Foundation.
Trump administration outlines plan to throw out an agency’s FOIA requests en masse (404Media). This is “an underhanded attempt to close out as many FOIA requests as possible, because who in their right mind checks the federal register regularly?” FPF’s Harper said.
Appeals court upholds block on Indiana’s 25-foot police buffer law, citing vagueness (Indiana Capital Chronicle). Hopefully, Tennessee’s and Louisiana’s “buffer” laws will be next, and other states will think twice before passing these unconstitutional laws.
Sorry, scanner listeners: BPD is encrypting its transmissions starting this weekend (Boston.com). Just like in New York City, encrypting police radio transmissions and adding a delay makes it harder for journalists to report and the public to stay informed.
reshared this
Bundesrechnungshof: Bundesregierung verfehlt Ziele der IT-Konsolidierung
Droni, missili, carri armati. Le immagini delle nuove armi di Pechino catturate dai satelliti
@Notizie dall'Italia e dal mondo
Il prossimo 3 settembre ricorrerà l’ottantesimo anniversario della resa delle forze armate giapponesi in Cina, evento riconosciuto nella retorica di Pechino come quello che, almeno per la Cina, pose fine alla Seconda guerra mondiale.
Allerta russa ad Aviano in mezzo ai meeting diplomatici sull’Ucraina
@Notizie dall'Italia e dal mondo
Mentre a Washington Donald Trump ospita il presidente ucraino, Volodymyr Zelensky, e i principali leader europei – tra cui Giorgia Meloni – e a soli tre giorni dal summit in Alaska tra Trump e Vladimir Putin, l’attenzione italiana non è rivolta soltanto al fronte diplomatico. Le
"If your girl says she’s just out with friends every night, you’d better slap one of these on her car."#TikTok
Synergy
Synergy (Extended) by TomZaneVirtual.Band
Trip hop ballad at 80 bpm, deep and raw atmosphere. F#m7 | C#m7 | Aadd9 | E7sus4/E7 chord loops. Dreamy, lo-fi Hammond pads, guitar with soft overdrive and echo, textured vinyl crackle and static layers, deep subby 808 kick, reverberated snare, shuff…Riffusion
A critical piece of tech infrastructure that lets people talk to the government has been disabled.#News
ALTERNATIVE #04: TASTIERA ANDROID* (GBOARD)
DISCLAIMER: questa non è una pubblicità per la FUTO, ho pensato di fare questa guida per le ragioni che spiego e perché mi sto trovando benissimo!
Molti pensano che la tastiera virtuale del telefono faccia parte delle componenti base e che non possa essere cambiata, invece è una semplice app.
Un'app che ha accesso direttamente a tutto quello che scriviamo, prima che venga crittografato dalle varie app di chat (anche le più sicure)...
Perciò, se la tastiera si connette a internet, può inviare ai server tutto quello che digitiamo.
Per questo, se teniamo alla nostra sovranità digitale, la tastiera è la prima app da sostituire.
Ho ottime ragioni per fidarmi di quella installata di default nel mio telefono degooglizzato, ma per chi usa un regolare sistema Android la tastiera di default è quella di Google, Gboard, che è nota per inviare ai server pacchetti dal contenuto per lo meno sospetto.
1) FUTO Keyboard
Poco tempo fa ho scoperto questo bel progetto della FUTO per rimpiazzare tutte le funzioni (anche le più avanzate) di Gboard, escludendo però ogni collegamento a internet durante l'utilizzo e utilizzando basi di dati più trasparenti (il training per il modello di digitazione a scorrimento, per esempio, viene fatto su base volontaria tra utenti che scelgono di contribuire).
Detto ciò, parliamo di una tastiera open source (più propriamente, source available) che ha integrati:
- dettatura vocale multilingue (voice input)
- immissione a scorrimento (swipe)
- dizionari per la lingua e per la ricerca delle emoji
- pannello di selezione delle emoji di sistema
- funzioni per spostarsi facilmente nel testo
- funzioni di copia e incolla avanzate, tra cui la cronologia degli appunti
È ancora in uno stadio iniziale di sviluppo, perciò ci alcune cose sono ancora in corso di implementazione e, per esempio, i dizionari e i modelli vanno installati a mano, e i menu di impostazione sono solo in inglese per il momento.
Ma ciononostante è sicuramente la più completa e promettente!
Seguite i passaggi nelle immagini per installarla e configurare le risorse italiane.
(Qui le istruzioni in un'immagine unica ad alta risoluzione)
Link PlayStore (o app alternativa)
---
In alternativa, è possibile installare separatamente un'app di dettatura vocale e provare una delle seguenti tastiere open source.
Per la dettatura vocale c'è l'app specifica di FUTO oppure Whisper:
- FUTO Voice Input
- Whisper per Android
---
2) AnySoftKeyboard
Il progetto open source più completo ed evoluto.
I pacchetti delle lingue e di alcuni layout aggiuntivi si installano come app separate, perciò in modo molto semplice.
Si appoggia all'app di dettatura vocale esistente. Il supporto allo swipe e le tantissime feature la rendono la migliore alternativa con licenza libera (apache).
App principale: Play Store / FDroid
Pacchetto italiano: Play Store / FDroid
3) Heliboard
Heliboard è un progetto open source già molto ricco di feature e con la possibilità di essere completato da una libreria opzionale per l'immissione a scorrimento (che però è quella proprietaria di Google, estratta da Gboard).
Purtroppo Heliboard non è presente nel Play Store, perciò dovrete installarla tramite F-Droid
4) Altre tastiere open source sono anche Florisboard e Fossify Keyboard.
Le funzionalità sono simili a quelle di Heliboard, eccetto che non supportano lo swipe.
Nessuna delle due supporta la dettatura vocale.
Per chi cerca il massimo della trasparenza, però, sono le più raccomandate (insieme a Heliboard).
Fossify Keyboard è reperibile sul Play Store o su FDroid.
Florisboard si può trovare su F-Droid
5) La tastiera minimalista: Simple Keyboard
Se tutto quello che vi serve è una tastiera, non sopportate l'autocorrettore e i suggerimenti e non vi interessa inserire le emoji, allora questa è la vostra tastiera ideale. Potrebbe rendere anche più veloce un vecchio telefono perché occupa pochissima memoria e non ha bisogno di processori moderni.
Link PlayStore (o app alternativa)
*) Purtroppo, ad oggi non sono a conoscenza di progetti simili per gli utenti Apple iOS...
#Google #degoogle #gboard #keyboard #virtualkeyboard #futokeyboard #FUTO #FUTO Tech #heliboard #florisbaord #fossify #fossifykeyboard #openboard
reshared this
Tiziano :friendica: likes this.
Tiziano :friendica: reshared this.
Un giorno farò un post anche su questi tipi di tastiere "non convenzionali"...
Tutti i subbugli in Microsoft su Israele e Gaza
L'articolo proviene da #StartMag e viene ricondiviso sulla comunità Lemmy @Informatica (Italy e non Italy 😁)
Per la sezione Stjv di Arkane Studios, software house francese nota per i videogame Dishonored, Prey, Deathoop e RedFall, la propria controllante, Microsoft, deve smettere di supportare Israele nella guerra di Gaza che avrebbe ormai
Nicola Pizzamiglio likes this.
Nicola Pizzamiglio reshared this.
ALTERNATIVE #03: POCKETS
Proseguo con la ripubblicazione dei miei post "Alternative", postati inizialmente su Facebook per raggiungere anche chi non ha mai sentito parlare di possibilità alternative...
Quello su Pockets è stato un post scritto in fretta in concomitanza con la chiusura del servizio da parte di Mozilla. Ne ho approfittato per parlare di mastodon.uno e della sua offerta riservata agli utenti. Mi pare corretto riportare comunque il post originale.
---
Approfitto della notizia a proposito di Mozilla che chiuderà domani il servizio "Pockets" di Firefox (utile per salvare articoli e pagine web per leggerle con calma) per segnalare che il gruppo Devol, che gestisce le istanze italiane Mastodon.uno, Pixelfed.uno, Peertube.uno e tanti altri servizi, ha messo a disposizione degli utenti del Fediverso italiano le app libere #wallabag e #readeck, che sono degli ottimi sostituti e in più sono libere e ospitate su server in Europa alimentati con energie rinnovabili (come tutti i servizi Devol)!
Per poterne usufruire, dovrete essere utenti attivi di una delle piattaforme gestite dal gruppo, perciò... quale miglior occasione di affacciarsi al Fediverso?
Date un'occhiata su www.mastodon.uno e entrate a far parte della più grande community italiana dell'universo social libero e federato, la rete sociale in cui ciascuno è realmente padrone di quello che vede (nel feed) e di quello che condivide.
---
Nicola Pizzamiglio likes this.
Ecco come ChatGPT di OpenAI sbaraglia la concorrenza
L'articolo proviene da #StartMag e viene ricondiviso sulla comunità Lemmy @Informatica (Italy e non Italy 😁)
Con 2 miliardi di dollari generati dal lancio e 690 milioni di download globali, l’app mobile di ChatGPT supera di 30 volte i ricavi complessivi di rivali come Claude, Copilot e Grok. Solo nel 2025 ha incassato 1,35 miliardi di
Nigeria, Amnesty denuncia un decennio di impunità: oltre 1.800 morti nel Sud-est
@Notizie dall'Italia e dal mondo
Il rapporto accusa autorità e milizie armate di torture, sparizioni e attacchi che hanno trasformato intere comunità in zone senza legge
L'articolo Nigeria, Amnesty denuncia un decennio di impunità: oltre 1.800 morti nel Sud-est proviene da Pagine
CYBERSECURITY… IN ITALIA?
@Informatica (Italy e non Italy 😁)
Cosa buona e giusta avere statistiche ufficiali e corposi periodici rapporti che analizzano e valutano il funzionamento di agenzie e sistemi...
L'articolo CYBERSECURITY… IN ITALIA? proviene da GIANO NEWS.
#TECNOLOGIA
Pippo è il suo popolo
@Giornalismo e disordine informativo
articolo21.org/2025/08/pippo-e…
In queste ore il compianto Baudo sta facendo un ultimo enorme regalo ai ceti dirigenti italiani: dopo il vertice di Anchorage con annessi e connessi, in presenza del genocidio di Gaza e delle morti sul suolo ucraino, a fronte delle tantissime guerre in corso, la fenomenologia del grande catanese (di
like this
Alfonso reshared this.
freezonemagazine.com/articoli/…
Recupero questo fantastico album che ha impiegato quasi un anno ad arrivarmi (misteri delle poste) e l’attesa per ascoltare il supporto fisico devo dire si è rivelata un benefico colpo di spugna sull’arrabbiatura per il disservizio. Il ritorno su disco di Billy Valentine, questo gigante della black music – si muove tra jazz, soul, blues […]
L'articolo Billy Valentine and The
Un altro che sta invecchiando male...
N.B.: l'articolo è leggibile solo pagando, (con soldi o in natura, con i dati personali) ma commenti e titoli non lasciano adito a dubbi.
Poliversity - Università ricerca e giornalismo reshared this.
Apice (BN), un paesino abbandonato dopo il terremoto dell'Irpinia (1980).
Apice (Benevento, IT), a small city abandoned after 1980 Irpinia earthquake.
reshared this
ec.europa.eu/commission/pressc…
Fedora Copr Repository Offers XLibre Packages For Alternative X Server
While a proposal to replace the upstream X.Org Server with the XLibre fork was ultimately withdrawn prior to voting by the Fedora Engineering and Steering Committee (FESCo), a Fedora Copr repository has now surfaced for those wanting to try out this …www.phoronix.com
Simon Perry
in reply to simona • •simona likes this.
Andre123
in reply to simona • • •simona
in reply to simona • •Simon Perry likes this.