Le commissioni in Parlamento cambiano stagione, ma poche poltrone | Pagella Politica
pagellapolitica.it/articoli/ri…
Step Into Combat Robotics with Project SVRN!
We all love combat robotics for its creative problem solving; trying to fit drivetrains and weapon systems in a small and light package is never as simple as it appears to be. When you get to the real lightweights… throw everything you know out the window! [Shoverobotics] saw this as a barrier for getting into the 150g weight class, so he created the combat robotics platform named Project SVRN.
You want 4-wheel drive? It’s got it! Wedge or a Grabber? Of course! Anything else you can imagine? Feel free to add and modify the platform to your heart’s content! Controlled by a Malenki Nano, a receiver and motor controller combo board, the SVRN platform allows anyone to get into fairyweight fights with almost no experience.
With 4 N10 motors giving quick control, the platform acts as an excellent platform for various bot designs. Though the electronics and structure are rather simple, the most important and impressive part of Project SVRN is the detailed documentation for every part of building the bot. You can find and follow the documentation yourself from [Shoverobotics]’s Printables page here!
If you already know every type of coil found in your old Grav-Synthesized Vex-Flux from your Whatsamacallit this might not be needed for you, but many people trying to get into making need a ramp to shoot for the stars. For those needing more technical know-how in combat robotics, check out Kitten Mittens, a bot that uses its weapon for locomotion!
youtube.com/embed/1mmZvLIwh6s?…
Il tuo laptop ti spia! scoperto un nuovo attacco in side channel che sfrutta una falla invisibile nei microfoni
Una voce femminile inquietante proviene dagli altoparlanti. Si fa strada tra le interferenze radio e dice chiaramente: “La canoa di betulla scivolava sulle assi lisce”. Cos’è tutto questo? Un messaggio segreto dall’aldilà o una rivelazione mistica?
No, in realtà è molto più spaventoso. Gli scienziati hanno scoperto che i normali microfoni integrati nei laptop e negli smart speaker si trasformano involontariamente in trasmettitori radio che trasmettono le conversazioni attraverso i muri. Questi segnali sono facili da captare anche con il più semplice ricevitore radio e consentono di decifrare ciò che viene detto.
Un team di ricercatori dell’Università della Florida e dell’Università giapponese di elettrocomunicazioni hanno scoperto per la prima volta una pericolosa vulnerabilità nei microfoni comuni. Si scopre che, quando i microfoni elaborano il suono, emettono deboli segnali radio che trasportano informazioni registrate attraversano i muri e possono essere captati da dispositivi economici che costano solo un centinaio di dollari.
Secondo la professoressa Sarah Rampazzi, una degli autori dello studio, “per ascoltare questi microfoni basta una semplice radio FM e un’antenna in rame”. Gli scienziati hanno condotto esperimenti con laptop, uno smart speaker Google Home e cuffie per videoconferenze. Il segnale è stato catturato al meglio dai laptop, poiché i loro microfoni sono collegati a lunghi fili che fungono da antenne e amplificano il segnale radio.
Anche se il microfono non viene utilizzato direttamente, può registrare le conversazioni e inviarle come segnali radio. Gli scienziati hanno notato che app popolari come Spotify, YouTube, Amazon Music e Google Drive attivano costantemente i microfoni in background, creando le condizioni ideali per l’intercettazione.
I ricercatori hanno anche dimostrato come le reti neurali di OpenAI e Microsoft possano facilmente eliminare le interferenze radio e ottenere trascrizioni testuali delle conversazioni. Questo apre opportunità per lo spionaggio industriale e governativo senza interferire fisicamente con i dispositivi.
Tuttavia, proteggersi da questa minaccia è piuttosto semplice. Gli scienziati suggeriscono di modificare la posizione dei microfoni nei computer portatili, ridurre la lunghezza dei cavi di collegamento e adattare i protocolli di elaborazione audio standard per ridurre l’intelligibilità dei segnali radio.
I ricercatori hanno già trasmesso le loro raccomandazioni ai produttori dei dispositivi, ma non è noto se le aziende implementeranno questi miglioramenti nei modelli futuri.
L'articolo Il tuo laptop ti spia! scoperto un nuovo attacco in side channel che sfrutta una falla invisibile nei microfoni proviene da il blog della sicurezza informatica.
Gazzetta del Cadavere reshared this.
Hacking T Cells to Treat Celiac Disease
As there is no cure for celiac disease, people must stick to a gluten free diet to remain symptom-free. While this has become easier in recent years, scientists have found some promising results in mice for disabling the disease. [via ScienceAlert]
Since celiac is an auto-immune disorder, finding ways to alter the immune response to gluten is one area of investigation to alleviate the symptoms of the disease. Using a so-called “inverse vaccine,” researchers “engineered regulatory T cells (eTregs) modified to orthotopically express T cell receptors specific to gluten peptides could quiet gluten-reactive effector T cells.”
The reason these are called “inverse vaccines” is that, unlike a traditional vaccine that turns up the immune response to a given stimuli, this does the opposite. When the scientists tried the technique with transgenic mice, the mice exhibited resistance to the typical effects of the target gluten antigen and a related type on the digestive system. As with much research, there is still a lot of work to do, including testing resistance to other types of gluten and whether there are still long-term deleterious effects on true celiac digestive systems as the transgenic mice only had HLA-DQ2.5 reactivity.
If this sounds vaguely familiar, we covered “inverse vaccines” in more detail previously.
è davvero triste che non ci sia modo di essere ascoltati se non da uno strumento ai senza pretese che però almeno risponde in base alle parole che usi nella domanda e non in base a cosa desidera dire chi ti risponde.
è davvero triste che non ci sia modo di essere ascoltati se non da uno strumento ai senza pretese che però almeno risponde in base alle parole che usi nella domanda e non in base a cosa desidera dire chi ti risponde.
Google Gemini
Gemini is your personal, proactive, and powerful AI assistant from Google. Try it for free to help with work, school, and at home for whatever inspires you.Gemini
Compound Press Bends, Punches and Cuts Using 3D Printed Plastic
It’s not quite “bend, fold or mutilate” but this project comes close– it actually manufactures a spring clip for [Super Valid Designs] PETAL light system. In the video (embedded below) you’ll see why this tool was needed: by-hand manufacturing worked for the prototype, but really would not scale.Two examples of the spring in question, embedded in the 3D printed light socket. There’s another pair you can’t see.
The lights themselves might be worthy of a post, being a modular, open source DMX stage lighting rig. Today though we’re looking at how they are manufactured– specifically how one part is manufactured. With these PETAL lights, the lights slot into a base station, which obviously requires a connection of some sort. [Super Valid Designs] opted for a spring connector, which is super valid.
It’s also a pain to work by hand: spring steel needed to be cut to length, hole punched, and bent into the specific shape required. The hand-made springs always needed adjustment after assembly, too, which is no good when people are giving you money for objects. Even when using a tent-pole spring that comes halfway to meeting their requirements, [Super Valid Designs] was not happy with the workflow.
Enter the press: 3D Printed dies rest inside a spring-loaded housing, performing the required bends. Indeed, they were able to improve the shape of the design thanks to the precision afforded by the die. The cutting step happens concurrently, with the head of a pair of tin snips mounted to the jig, and a punch finishes it off. All of this is actuated with a cheap, bog simple , hand-operated arbor press. What had been tedious minutes of work is reduced to but a moment of lever-pushing.
It great story about scaling and manufacturing that may hopefully inspire others in their projects. Perhaps with further optimization and automation, [Super Valid Designs] may find himself in the market for a modular conveyor belt design.
While this process remains fundamentally manual, we have seen automation in maker-type businesses before, like this coaster-slinging CNC setup. Of course automation doesn’t have to be part of a business model; sometimes it’s nice just to skip a tedious bunch of steps, like when building a star lamp.
youtube.com/embed/Mt4FLgW4n4o?…
Dal 3 giugno è aperta la piattaforma per le adesioni individuali alla Campagna Stop ReArm Europe.
MANIFESTAZIONE NAZIONALE CONTRO GUERRA, RIARMO, GENOCIDIO, AUTORITARISMO
FERMIAMO LA GUERRA - STOP REARM EUROPE
ROMA 21 GIUGNO 2025 ore 14:00 Porta Sa…
FREE ASSANGE Italia
Dal 3 giugno è aperta la piattaforma per le adesioni individuali alla Campagna Stop ReArm Europe. MANIFESTAZIONE NAZIONALE CONTRO GUERRA, RIARMO, GENOCIDIO, AUTORITARISMO FERMIAMO LA GUERRA - STOP REARM EUROPE ROMA 21 GIUGNO 2025 ore 14:00 Porta Sa…Telegram
Randomly Generating Atari Games
They say that if you let a million monkeys type on a million typewriters, they will eventually write the works of Shakespeare. While not quite the same thing [bbenchoff] (why does that sound familiar?), spent some computing cycles to generate random data and, via heuristics, find valid Atari 2600 “games” in the data.
As you might expect, the games aren’t going to be things you want to play all day long. In fact, they are more like demos. However, there are a number of interesting programs, considering they were just randomly generated.
Part of the reason this works is that the Atari has a fairly simple 6502-based CPU, so it is straightforward to evaluate the code, and a complete game fits in 4 K. Still, that means there are, according to [Brian], 1010159 possible ROMs. Compare that to about 1080 protons in the visible universe, and you start to see the scale of the problem.
To cut down the problem, you need some heuristics you can infer from actual games. For one thing, at least 75% of the first 1K of a ROM should be valid opcodes. It is also easy to identify code that writes to the TV and other I/O devices. Obviously, a program with no I/O isn’t going to be an interesting one.
Some of the heuristics deal with reducing the search space. For example, a valid ROM will have a reset vector in the last two bytes, so it is possible to generate random data and then apply the small number of legal reset vectors.
Why? Do you really need a reason? If you don’t have a 2600 handy, do like [Brian] and use an emulator. We wonder if the setup would ever recreate Tarzan?
Anche la Toscana interromperà le relazioni istituzionali con Israele
"L’interruzione delle relazioni istituzionali ha un valore più politico che economico. Di fatto significa che i rappresentanti delle regioni, a partire dai presidenti, non potranno incontrare diplomatici israeliani e che non potranno essere organizzati eventi in collaborazione con istituzioni israeliane".
like this
Poliversity - Università ricerca e giornalismo reshared this.
The confirmation follows 404 Media's reporting using flight data and air traffic control (ATC) audio that showed the agency was flying Predator drones above Los Angeles.
The confirmation follows 404 Mediax27;s reporting using flight data and air traffic control (ATC) audio that showed the agency was flying Predator drones above Los Angeles.#News
CBP Confirms It Is Flying Predator Drones Above Los Angeles To Support ICE
The confirmation follows 404 Media's reporting using flight data and air traffic control (ATC) audio that showed the agency was flying Predator drones above Los Angeles.Joseph Cox (404 Media)
USA e #Cina, il teatro dei #dazi
USA e Cina, il teatro dei dazi
Al termine di due giorni di discussioni a Londra, le delegazioni di alto livello di Cina e Stati Uniti avrebbero trovato un accordo sul ripristino del meccanismo di “consenso”, sottoscritto a Ginevra lo scorso mese di maggio, per evitare un’escalatio…www.altrenotizie.org
FLOSS Weekly Episode 835: Beeps and Boops with Meshtastic
This week Jonathan and Aaron chat with Ben Meadors and Garth Vander Houwen about Meshtastic! What’s changed since we talked to them last, where is the project going, and what’s coming next? Listen to find out!
youtube.com/embed/hYm_2iVpN4c?…
Did you know you can watch the live recording of the show right on our YouTube Channel? Have someone you’d like us to interview? Let us know, or contact the guest and have them contact us! Take a look at the schedule here.
play.libsyn.com/embed/episode/…
Direct Download in DRM-free MP3.
If you’d rather read along, here’s the transcript for this week’s episode.
Places to follow the FLOSS Weekly Podcast:
Theme music: “Newer Wave” Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
hackaday.com/2025/06/11/floss-…
non sono soltanto le #bugiesioniste a darmi il voltastomaco, ma anche la facilità del mondo #Google ad accettare clienti di questa risma: youtu.be/Cs7cpkDKTh0?si=jA96In…
ma ci rendiamo conto del livello di schifo?
#vomito #sionisti
#Gaza #genocidio #Palestina
#warcrimes #sionismo #zionism
#starvingpeople #starvingcivilians
#iof #idf #colonialism #sionisti
#izrahell #israelterroriststate
#invasion #israelcriminalstate
#israelestatocriminale
#bambini #massacri #deportazione
#concentramento
Poliversity - Università ricerca e giornalismo reshared this.
like this
Network Infrastructure and Demon-Slaying: Virtualization Expands What a Desktop Can Do
The original DOOM is famously portable — any computer made within at least the last two decades, including those in printers, heart monitors, passenger vehicles, and routers is almost guaranteed to have a port of the iconic 1993 shooter. The more modern iterations in the series are a little trickier to port, though. Multi-core processors, discrete graphics cards, and gigabytes of memory are generally needed, and it’ll be a long time before something like an off-the-shelf router has all of these components.
But with a specialized distribution of Debian Linux called Proxmox and a healthy amount of configuration it’s possible to flip this idea on its head: getting a desktop computer capable of playing modern video games to take over the network infrastructure for a LAN instead, all with minimal impact to the overall desktop experience. In effect, it’s possible to have a router that can not only play DOOM but play 2020’s DOOM Eternal, likely with hardware most of us already have on hand.
The key that makes a setup like this work is virtualization. Although modern software makes it seem otherwise, not every piece of software needs an eight-core processor and 32 GB of memory. With that in mind, virtualization software splits modern multi-core processors into groups which can act as if they are independent computers. These virtual computers or virtual machines (VMs) can directly utilize not only groups or single processor cores independently, but reserved portions of memory as well as other hardware like peripherals and disk drives.
Proxmox itself is a version of Debian with a number of tools available that streamline this process, and it installs on PCs in essentially the same way as any other Linux distribution would. Once installed, tools like LXC for containerization, KVM for full-fledged virtual machines, and an intuitive web interface are easily accessed by the user to allow containers and VMs to be quickly set up, deployed, backed up, removed, and even sent to other Proxmox installations.
Desktop to Server
The hardware I’m using for Proxmox is one of two desktop computers that I put together shortly after writing this article. Originally this one was set up as a gaming rig and general-purpose desktop computer running Debian, but with its hardware slowly aging and my router not getting a software update for the last half decade I thought I would just relegate the over-powered ninth-generation Intel Core i7 with 32 GB of RAM to run the OPNsense router operating system on bare metal, while building a more modern desktop to replace it. This was both expensive not only in actual cost but in computer resources as well, so I began investigating ways that I could more efficiently use this aging desktop’s resources. This is where Proxmox comes in.
By installing Proxmox and then allocating four of my eight cores to an OPNsense virtual machine, in theory the desktop could function as a router while having resources leftover for other uses, like demon-slaying. Luckily my motherboard already has two network interfaces, so the connection to a modem and the second out to a LAN could both be accommodated without needing to purchase and install more hardware. But this is where Proxmox’s virtualization tools start to shine. Not only can processor cores and chunks of memory be passed through to VMs directly, but other hardware can be sectioned off and passed through as well.
So I assigned one network card to pass straight through to OPNsense, which connects to my modem and receives an IP address from my ISP like a normal router would. The other network interface stays with the Proxmox host, where it is assigned to an internal network bridge where other VMs get network access. With this setup, all VMs and containers I create on the Proxmox machine can access the LAN through the bridge, and since the second networking card is assigned to this bridge as well, any other physical machines (including my WiFi access point) can access this LAN too.
Not All VMs are Equal
Another excellent virtualization feature that Proxmox makes easily accessible is the idea of “CPU units”. In my setup, having four cores available for a router might seem like overkill, and indeed it is until my network gets fully upgraded to 10 Gigabit Ethernet. Until then, it might seem like these cores are wasted.
However, using CPU units the Proxmox host can assign unused or underutilized cores to other machines on the fly. This also lets a user “over-assign” cores, while the CPU units value acts as a sort of priority list. My ninth-generation Intel Core i7 has eight cores, so in this simple setup I can assign four cores to OPNsense with a very high value for CPU units and then assign six cores to a Debian 12 VM with a lower CPU unit value. This scheduling trick makes it seem as though my eight-core machine is actually a ten-core machine, where the Debian 12 VM can use all six cores unless the OPNsense VM needs them. However, this won’t get around the physical eight-core reality where doing something like playing a resource-intense video game while there’s a large network load, and this reassignment of cores back to the router’s VM could certainly impact performance in-game.A list of VMs and containers running on Proxmox making up a large portion of my LAN, as well as storage options for my datacenter.
Of course, if I’m going to install DOOM Eternal on my Debian 12 VM, it’s going to need a graphics card and some peripherals as well. Passing through USB devices like a mouse and keyboard is straightforward. Passing through a graphics card isn’t much different, with some caveats.
The motherboard, chipset, and processor must support IOMMU to start. From there, hardware that’s passed through to a VM won’t be available to anything else including the host, so with the graphics card assigned to a VM, the display for the host won’t be available anymore. This can be a problem if something goes wrong with the Proxmox machine and the network at the same time (not out of the question since the router is running in Proxmox too), rendering both the display and the web UI unavailable simultaneously.
To mitigate this, I went into the UEFI settings for the motherboard and set the default display to the integrated Intel graphics card on the i7. When Proxmox boots it’ll grab the integrated graphics card, saving the powerful Radeon card for whichever VM needs it.
At this point I’ve solved my initial set of problems, and effectively have a router that can also play many modern PC games. Most importantly, I haven’t actually spent any money at this point either. But with the ability to over-assign processor cores as well as arbitrarily passing through bits of the computer to various VMs, there’s plenty more that I found for this machine to do besides these two tasks.
Containerized Applications
The ninth-gen Intel isn’t the only machine I have from this era. I also have an eighth-generation machine (with the IME disabled) that had been performing some server duties for me, including network-attached storage (NAS) and media streaming, as well as monitoring an IP security camera system. With my more powerful desktop ready for more VMs I slowly started migrating these services over to Proxmox, freeing the eighth-gen machine for bare-metal tasks largely related to gaming and media. The first thing to migrate was my NAS. Rather than have Debian manage a RAID array and share it over the network on its own, I used Proxmox to spin up a TrueNAS Scale VM. TrueNAS has the benefit of using ZFS as a filesystem, a much more robust setup than the standard ext4 filesystem I use in most of my other Linux installations. I installed two drives in the Proxmox machine, passed them through to this new VM, and then set up my new NAS with a mirrored configuration, making this NAS even more robust than it previously was under Debian.
The next thing to move over were some of my containerized applications. Proxmox doesn’t only support VMs, it has the ability to spin up LXC containers as well. Containers are similar to VMs in that the software they run is isolated from the rest of the machine, but instead of running their own operating system they share the host’s kernel, taking up much less system resources. Proxmox still allows containers to be assigned processor cores and uses the CPU unit priority system as well, so for high-availability containers like Pihole I can assign the same number of CPU units as my OPNsense VM, but for my LXC container running Jelu (book tracking), Navidrome (streaming music), and Vikunja (task lists), I can assign a lower CPU unit value as well as only one or two cores.
The final containerized application I use is Zoneminder, which keeps an eye on a few security cameras at my house. It needs a bit more system resources than any of these other two, and it also gets its own hard drive assigned for storing recordings. Unlike TrueNAS, though, the hard drive isn’t passed through but rather the container mounts a partition that the Proxmox host retains ultimate control over. This allows other containers to see and use it as well.A summary of my Proxmox installation’s resource utilization. Even with cores over-assigned, it rarely breaks a sweat unless gaming or transferring large files over the LAN.
At this point my Proxmox setup has gotten quite complex for a layperson such as myself, with a hardware or system failure meaning that not only would I lose my desktop computer but also essentially all of my home’s network infrastructure and potentially all of my data as well. But Proxmox also makes keeping backups easy, a system that has saved me many times.
For example, OPNsense once inexplicably failed to boot, and another time a kernel update in TrueNAS Scale caused it to kernel panic on boot. In both cases I was able to simply revert to a prior backup. I have backups scheduled for all of my VMs and containers once a week, and this has saved me many headaches. Of course, it’s handy to have a second computer or external drive for backups, as you wouldn’t want to store them on your virtualized NAS which might end up being the very thing you need to restore.
I do have one final VM to mention too, which is a Windows 10 installation. I essentially spun this up because I was having an impossibly difficult time getting my original version of Starcraft running in Debian and thought that it might be easier on a Windows machine. Proxmox makes it extremely easy to assign a few processor cores and some memory and test something like this out, and it turned to work out incredibly well.
So well, in fact, that I also installed BOINC in the Windows VM and now generally leave this running all the time to take advantage of any underutilized cores on this machine for the greater good when they’re not otherwise in use. BOINC is also notoriously difficult to get running in Debian, especially for those using non-Nvidia GPUs, so at least while Windows 10 is still supported I’ll probably keep this setup going for the long term.
Room for Improvement
There are a few downsides to a Proxmox installation, though. As I mentioned previously, it’s probably not the best practice to keep backups on the same hardware, so if it’s your only physical computer then that’ll take some extra thought. I’ve also had considerable difficulty passing an optical drive through to VMs, which is not nearly as straightforward as passing through other hardware types for reasons which escape me. Additionally, some software doesn’t take well to running on virtualized hardware at all. In the past I have experimented with XMR mining software as a way to benchmark hardware capabilities, and although I never let it run nearly long enough to ever actually mine anything it absolutely will not run at all in a virtualized environment. There are certainly other pieces of software that are similar.
I also had a problem that took a while to solve regarding memory use. Memory can be over-assigned like processor cores, but an important note is that if Proxmox is using ZFS for its storage, as mine does, the host OS will use up an incredibly large amount of memory. In my case, file transfers to or from my TrueNAS VM were causing out-of-memory issues on some of my other VMs, leading to their abrupt termination. I still don’t fully understand this problem and as such it took a bit of time to solve, but I eventually both limited the memory the host was able to use for ZFS as well as doubled the physical memory to 64 GB. This had the downstream effect of improving the performance of my other VMs and containers as well, so it was a win-win at a very minimal cost.
The major downside for most, though, will be gaming. While it’s fully possible to run a respectable gaming rig with a setup similar to mine and play essentially any modern game available, this is only going to work out if none of those games use kernel-level anticheat. Valorant, Fortnite, and Call of Duty are all examples that are likely to either not run at all on a virtualized computer or to get an account flagged for cheating.
There are a number of problems with kernel-level anti-cheat including arguments that they are types of rootkits, that they are attempts to stifle Linux gaming, and that they’re lazy solutions to problems that could easily be solved in other ways, but the fact remains that these games will have to be played on bare metal. Personally I’d just as soon not play them at all for any and all of these reasons, even on non-virtualized machines.
Beat On, Against the Current
The only other thing worth noting is that while Proxmox is free and open-source, there are paid enterprise subscription options available, and it is a bit annoying about reminding the user that this option is available. But that’s minor in the grand scheme of things. For me, the benefits far outweigh these downsides. In fact, I’ve found that using Proxmox has reinvigorated my PC hobby in a new way.
While restoring old Apple laptops is one thing, Proxmox has given me a much deeper understanding of computing hardware in general, as well as made it easy to experiment and fiddle with different pieces of software without worrying that I’ll break my entire system. In a very real way it feels like if I want a new computer, it lets me simply create a virtual one that I am free to experiment with and then throw away if I wish. It also makes fixing mistakes easy. Additionally, most things running on my Proxmox install are more stable, more secure, and make more efficient use of system resources.
It’s saved me a ton of money since I nether had to buy individual machines like routers or a NAS and its drives too, nor have I had to build a brand new gaming computer. In fact, the only money I spent on this was an arguably optional 32 GB memory upgrade, which is pennies compared to having to build a brand new desktop. With all that in mind, I’d recommend experimenting with Proxmox for anyone with a computer or similarly flagging interest in their PC in general, especially if they still occasionally want to rip and tear.
ICYMI: No Kings and Good Neighbors
This Saturday, June 14th, there will be nationwide “No Kings” protests, protesting the current administration and the overreach of federal powers.
In the United States of America, we have no kings.
While many Pirates have already expressed their desire to attend their local No Kings protest, which you could find here.
In addition to attending, representatives from the Arizona Pirate Party will be tabling at the No Kings protest at Reid Park in Tucson, AZ
Speaking of No Kings, check out the Illinois Pirate Party Captain’s speech from the 50501 “No Kings” protest from May 17th in Quincy, IL here.
Back on Pan-American Day weekend, members of the US Pirate Party held tabling events and passed out flyers promoting the need for the United States being a good neighbor. That flyer is now available on our website and is available to read, download and print here.
Grecia, tre deputati neofascisti sospesi per “frode elettorale”
@Notizie dall'Italia e dal mondo
In Grecia la Corte Suprema ha inabilitato tre deputati del partito di estrema destra "Spartani", guidato dal carcere dall'ex leader di Alba Dorata
L'articolo Grecia, tre deputati neofascisti sospesi per “frode elettorale” proviene da pagineesteri.it/2025/06/11/mon…
Notizie dall'Italia e dal mondo reshared this.
“This would do immediate and irreversible harm to our readers and to our reputation as a decently trustworthy and serious source,” one Wikipedia editor said.#News
All’Italia serve una strategia per abbassare le bollette (di A. Corrado)
@Politica interna, europea e internazionale
Mentre sembra sempre che il governo Meloni abbia cose più importanti da fare, in Italia si aggira indisturbato un Robin Hood impazzito che svuota le tasche a cittadine e cittadini e alle piccole e medie imprese, spina dorsale del nostro tessuto economico e produttivo, per gonfiare quelle dei ricchi, che
Politica interna, europea e internazionale reshared this.
Come proteggersi durante le proteste. I dimostranti affrontano gas lacrimogeni, granate stordenti, coronavirus e sorveglianza
Come evitare che le cosiddette armi non letali provochino danni temporanei o permanenti? Come proteggere la propria identità dagli strumenti di identificazione biometrica?
Nota dell'editore (11/06/25): Ripubblichiamo questo articolo del 2020 alla luce delle recenti proteste contro i raid sull'immigrazione a Los Angeles.
Grazie a @Mike Taylor 🦕 che ha condiviso l'articolo
like this
reshared this
Cosa cambia con la legge sulla space economy. Il confronto con Mascaretti e Valente su Formiche.net
@Notizie dall'Italia e dal mondo
Con l’approvazione definitiva del Disegno di legge in materia di economia dello Spazio, l’Italia compie un passo strategico verso la definizione di una vera politica industriale del settore spaziale. Una legge attesa, che
Notizie dall'Italia e dal mondo reshared this.
Doppia sanzione a Vodafone: una lezione sull’importanza di investire in protezione dei dati
@Informatica (Italy e non Italy 😁)
Il Garante privacy tedesco (BfDI) ha inflitto due sanzioni a Vodafone, per carenze nei controlli su propri data processor e per vulnerabilità nei processi di autenticazione. Ecco i dettagli e la lezione da imparare
Informatica (Italy e non Italy 😁) reshared this.
Rutte, Roma e il risveglio della Nato. L’Europa tra spese militari e minacce ibride secondo Minuto Rizzo
@Notizie dall'Italia e dal mondo
Sarà importante per il futuro della Nato e del suo pilastro europeo, dove spicca il ruolo dell’Italia, osserva a Formiche.net l’ambasciatore Alessandro Minuto Rizzo, spiegarne ai cittadini anche la visione e il raggio d’azione, non solo la decisione di aumentare il
Notizie dall'Italia e dal mondo reshared this.
La Siria obbliga le donne a indossare il burkini sulle spiagge pubbliche
@Notizie dall'Italia e dal mondo
Si tratta di un costume da bagno appositamente studiato per coprire tutto il corpo
L'articolo La Siria obbliga le donne a indossare il pagineesteri.it/2025/06/11/med…
Notizie dall'Italia e dal mondo reshared this.
Acn: a maggio recrudescenza dell’attività ransomware in Italia
@Informatica (Italy e non Italy 😁)
Con un incremento a doppia cifra rispetto alla media semestrale precedente, l’attività ransomware in Italia torna protagonista. Ecco i settori con più vittime e come mitigare il rischio
L'articolo Acn: a maggio recrudescenza dell’attività ransomware in Italia proviene da Cyber Security
Informatica (Italy e non Italy 😁) reshared this.
This Relay Computer Has Magnetic Tape Storage
Magnetic tape storage is something many of us will associate with 8-bit microcomputers or 1960s mainframe computers, but it still has a place in the modern data center for long-term backups. It’s likely not to be the first storage tech that would spring to mind when considering a relay computer, but that’s just what [DiPDoT] has done by giving his machine tape storage.
We like this hack, in particular because it’s synchronous. Where the cassette storage of old just had the data stream, this one uses both channels of a stereo cassette deck, one for clock and the other data. It’s encoded as a sequence of tones, which are amplified at playback (by a tube amp, of course) to drive a rectifier which fires the relay.
On the record side the tones are made by an Arduino, something which we fully understand but at the same time can’t help wondering whether something electromechanical could be used instead. Either way, it works well enough to fill a relay shift register with each byte, which can then be transferred to the memory. It’s detailed in a series of videos, the first of which we’ve paced below the break.
If you want more cassette tape goodness, while this may be the slowest, someone else is making a much faster cassette interface.
youtube.com/embed/3r_vtB9umZ4?…
Vorratsdatenspeicherung: Keine Begründung für überlange Speicherfrist von drei Monaten
Stefano Galieni*
Si parta dal fatto che il bicchiere referendario va visto come “mezzo pieno”. Che nell’afoso silenzio elettorale, nella melassa della distrazione di massa, nell’assenza quanto nell’indicazione da parte di alte cariche dello Stato a disertare le urne, che quasi 15 milioni di aventi diritto si rechino a votare su quesiti complessi, sovente spiegati male – a volte anche dagli stessi proponenti – è un risultato da cui partire e da non dimenticare, per innescare dinamiche più articolate attorno al rapporto fra democrazia e partecipazione. Dalle prime dichiarazioni del segretario nazionale della Cgil questo dato pare acquisito, così come sembra aver preso piede la necessità di riaprire un lavoro di inchiesta sul campo nel mondo articolato, variegato e complesso del mondo del lavoro, fatto di ascolto, di ricerca, di analisi, tanto nei singoli territori, con le loro complessità, quanto nei diversi comparti produttivi. Un impegno che non si può esaurire nei luoghi di lavoro – troppo spesso effimeri, frammentati, fondati sull’isolamento – ma che deve riconnettere l’intero tessuto sociale del Paese. Non si tratta di utilizzare termini idealisti quali “ottimismo” quanto di una verifica incontrovertibile dei risultati ottenuti laddove insieme ai referendum si votava per il primo turno delle elezioni amministrative (cfr Nuoro) o al ballottaggio (Taranto o Matera). In queste città il quorum referendario si è quasi sempre raggiunto o superato e i risultati hanno dato una netta prevalenza del si. Ogni dato ipotetico, legato ad un superamento generale del quorum va preso con le molle. Se è vero che la destra tende ad appropriarsi del blocco astensionista, questa non va imitata. Non bisogna credere o far credere a proiezioni arbitrarie dei risultati anche se, va detto, laddove nei ballottaggi hanno prevalso coalizioni di centro destra, sui referendum hanno vinto le posizioni dei promotori dei quesiti. C’è però un vulnus, profondo e dalla forte natura politica che va analizzato nelle sue diverse e complesse sfaccettature. I referendum che direttamente impattavano sul mondo del lavoro sono quelli che hanno ricevuto i maggiori consensi con i 12.249.649 voti, in percentuale l’89.6% dei votanti (contro il jobs act) e i 12.220.430, pari all’ 89,04 % sul terzo quesito, quello riguardante le maggior tutele per chi lavora nelle piccole imprese. Questo perché nel mondo produttivo nazionale, questo tessuto è divenuto prevalente. Il problema forte è nel divario fra i si ottenuti ai 4 referendum e quello erroneamente presentato come quesito su immigrazione e cittadinanza.
In realtà il quesito, che mirava a dimezzare i tempi necessari per poter chiedere (non per ottenere come erroneamente, a volte anche in buona fede ha sintetizzato qualcuno), ha ottenuto oltre 3.200 mila voti in meno rispetto agli altri e questo apre ad una necessaria e urgente riflessione politica che si dirama verso diverse direzioni. I 3 milioni e 200 mila che hanno votato no ad una proposta minimale di estensione dei diritti a loro colleghe e colleghi di lavoro, a studentesse e studenti, vanno cercati in ambiti diversi, tanto in base alle appartenenze politiche, quanto alla disinformazione dilagante, quanto ai territori in cui tale dissenso si è manifestato. Con questo approccio non si intende certo fare proposte per affrontare un tema vasto e complesso, ma si propone semplicemente di analizzarlo in maniera laica e basata su dati certi, non su ipotesi. Togliamo, almeno in parte, le elettrici e gli elettori del M5S a cui il movimento aveva lasciato “libertà di coscienza” pronunciandosi compiutamente solo sui primi quattro si. Non si può dimenticare la composizione di questa forza politica che unisce ad una posizione altamente progressista su tematiche come il lavoro e l’opposizione al riarmo, crepe significative rispetto ai diritti, in particolare sul tema dell’immigrazione. Hanno governato con Salvini, una parte di loro considera ancora le Ong come “taxi del mare” ed è difficile far comprendere ad un elettorato poco politicizzato, anzi dall’origine orientato all’antipolitica, la differenza che passa fra i richiedenti asilo e chi vive e lavora magari da decenni in questo assurdo Paese. In alcuni, non tutti, i casi, i vertici – al contrario di altre forze politiche – sono più avanzati della base e questo è un problema di cui tenere conto. C’è poi una piccola area, forse ancora poco rilevante in termini numerici ma capace di proporre forti argomentazioni di contrarietà all’estensione dei diritti e che, per necessità di sintesi, proviamo a definire come i sostenitori italiani dell’approccio BSW di Sahra Wagenknecht. Si tratta di un’area di “sinistra nazionalista” secondo cui le forze comuniste (per loro neoliberiste) hanno da troppo tempo dimenticato il proletariato nazionale in nome di valori e di una società cosmopolita. Lavoratori (non è il caso che utilizzino spesso il termine al maschile), che, sentendosi abbandonati e vedendo i colleghi immigrati come concorrenti al ribasso nei salari, li percepiscono come “nemici”. Un approccio da sinistra conservatrice che però, in un contesto come quello italiano, più impoverito di quello tedesco, può trovare spazio e costituire cultura di se. Peccato che l’impoverimento del Paese non sia certo dovuto alla presenza, peraltro non competitiva di lavoratrici e lavoratori stranieri quanto all’assenza di una sana conflittualità per il miglioramento delle condizioni salariali, per un welfare da ricostruire, per servizi da estendere e non da considerare privilegi per chi, magari individualmente, li ha ottenuti.
Un’altra componente in cui ha prevalso la diffidenza vede insieme problemi di classe e generazionali. Ci si riferisce ad una marea di persone, sovente pensionate, con basso reddito e la cui informazione è basata sul livello infimo dei canali televisivi. Per questi il cambiamento sociale epocale dovuto all’immigrazione è da decenni – anche grazie a politiche di governo di diverso orientamento, complici o vigliacche – sinonimo di sconvolgimento, di paura, di insicurezza perché i volti che si incontrano sono considerati ancora sconosciuti e minacciosi. Tale paura, che secondo la narrazione tossica televisiva modello Rete 4 è generalizzante, nell’esperienza personale è rivolta principalmente contro quelle e quelli che vengono percepiti come poveri e, in quanto tali, concorrenti alla spartizione delle poche briciole lasciate da un welfare a pezzi. L’impressione, ancora da misurare con rilevazioni più accurate, è che laddove prevale un elettorato giovane e colto, spesso universitario, il divario delle opinioni sui diversi quesiti, si assottiglia molto. Resta, sia ben chiaro, ma c’è un segnale che contrasta invece con una ricerca basata su quanto accade nei territori. Nelle grandi città il si alla riforma della legge sulla cittadinanza ha avuto risultati migliori rispetto alle piccole province, significativo il divario fra un Nord più restio – pesa ancora l’influenza leghista – e un sud, in cui si è votato di meno ma dove la percentuale dei favorevoli al quinto referendum è stata maggiore. Non da ultimo, ad una prima analisi, si conferma anche un altro forte divario fra i risultati nei seggi ubicati nelle periferie e quelli in zone più borghesi.
Ad una lettura che si fermi alla fotografia del presente, i risultati sembrano confermare le tesi del BSW, che colgono la contraddizione fra un ceto medio progressista, più teso a difendere i “diritti civili” di chi non ha il problema di mettere insieme il pranzo con la cena, ed un proletariato / sottoproletariato, privo di strumenti di tutela e privo persino di quella consapevolezza di diritto alla rivolta verso le classi dominanti. E ci siamo infine arrivati, questi risultati si dimostrano questione politica da affrontare. O le soggettività politiche e sindacali si assumono la responsabilità di operare per una concreta ricomposizione di classe che passi attraverso lotte comuni, formazione, ricostruzione di una egemonia culturale in grado di ridare una spiegazione materiale e ideologica al presente o si è condannati a subire quella dell’avversario di classe.
Secondo alcune / i, questo referendum non andava fatto, secondo il parere di altre / i è stato impostato su valori di carattere liberale – come spesso capita sulle questioni inerenti diritti civili – non comunicandone la sua specificità all’interno di una complessità di classe. Chi scrive pensa che entrambe le reazioni siano inadeguate. Il referendum era necessario a seguito di totale inadempienza delle forze politiche presenti in parlamento che, o per opposizione ad ogni miglioramento di una legge razzista come la 91/1992 o per il timore di perdere consensi, non è mai stata seriamente messa in discussione. Solo una partecipazione popolare poteva riproporre meglio tale tema nell’agenda politica del Paese e questo in parte, certamente insufficiente, è avvenuto. Sulla seconda critica il ragionamento che va fatto è più articolato, spettava ai settori di classe organizzati e più avanzati, presentarlo nei luoghi critici come elemento di ricomposizione di classe ma spettava anche al ceto medio “illuminato” valorizzare il fatto che questo non era un “referendum sull’immigrazione” ma un primo tentativo per fare i conti con un Paese che è cambiato nel profondo nella propria composizione sociale.
Ora diventa necessario non disperdere quel consenso che comunque si è accumulato per farlo crescere, magari con un percorso più visibile, per ottenere non piccoli miglioramenti legislativi o accettare le proposte al ribasso come lo “ius scholae” già rilanciato da Forza Italia, ma modifiche molto più sostanziali. Bisogna puntare in alto partendo da alcuni elementi, questi si profondamente di classe. In Italia le questioni sociali sono divenute divisive quando scientemente si è scelto di separarle. Si pensi alle cd politiche inclusive per i rom, per i rifugiati, per i senza fissa dimora, per le persone con disagio psichico. Va invece reimposto di affrontare i problemi che attanagliano la vita di chi ha meno diritti o meno opportunità, riportandoli ad un carattere di universalismo. Serve edilizia popolare? Il solo modo per evitare che un quartiere di una periferia si mobiliti in maniera aggressiva perché legittimamente è stato dato un alloggio pubblico ad una famiglia “straniera” è quello di aumentare il numero di alloggi per edilizia pubblica, facendo conoscere bene i criteri di graduatoria. Lo stesso ragionamento va fatto per i presidi sanitari, per i posti negli asili nido, per tutti quei bisogni primari in cui la concorrenza fra ultimi e penultimi è determinata in realtà dal fatto che entrambi non sono garantiti dai poteri dominanti. Questo tipo di intervento che è sociale, economico, ma persino pedagogico, non va lasciato all’improvvisazione ma deve vedere come protagonisti tanto lo Stato, le regioni, i Comuni e gli enti pubblici di prossimità, quanto i corpi intermedi di cui questo Paese ha estremo bisogno, partiti, sindacati, mondo associativo eccetera. E riguardando un cambiamento sociale in atto da decenni ed irrefrenabile, deve vedere come protagoniste/i anche quelle forze vive, nate e/o cresciute in Italia che potrebbero svolgere un ruolo propulsivo.
Si tratta di coesione sociale che deve poter comprendere quante più persone possibili e attraverso cui va declinato, da “sinistra” il termine sicurezza, alibi attraverso cui da decenni si consumano le peggiori nefandezze.
Dovremmo insomma produrre un programma più ambizioso per il futuro, capace di modificare radicalmente le gerarchie dell’agenda politica e di quella, conseguente, dei media mainstream. Fino a quando si continuerà unicamente a difendersi con termini compassionevoli, che si richiamano ad un’etica che risulta inutile nella giungla della competizione individuale, saremo – molto probabilmente e quando va bene – in grado di ottenere soltanto la riduzione del danno. Invece dobbiamo volere “il pane e le rose” ad esempio costruendo quelle relazioni per cui la parola “cittadinanza”, da concessione individuale per alcune/i, riassuma il suo significato originale di appartenenza ad una comunità aperta e capace di guardare in avanti. Occorre un lavoro lungo, di tutte e di tutti, in cui il passaggio referendario va visto, con le sue contraddizioni, come un primo risultato da non rinnegare.
P.S. i referendum hanno risentito sicuramente anche, come già detto, di una scarsa quando non distorta informazione. A chi scrive è capitato, almeno un paio di volte, di partecipare in orari improbabili, a tribune referendarie televisive. Nel backstage, prima della diretta, gli esponenti della maggioranza dialogavano mostrando di comprendere quanto la presenza soprattutto di giovani immigrate/i non fosse stata mai seriamente affrontata, parlavano di urgenza di dialogo. Ma non appena le telecamere si accendevano, gli stessi si scatenavano affermando che i promotori volevano regalare la cittadinanza a clandestini, delinquenti, stupratori e, chi più ne ha più ne metta, seguendo un trito copione di esaltazione del braccio forte e autorevole dell’attuale compagine governativa. Un triste show che va in onda ogni giorno a reti pressoché unificate e in cui il contraddittorio è spesso debole se non timido. Anche questo è un intervento da perseguire perché sul pensiero televisivo si formano ancora le opinioni delle persone. Ed anche questo è un terreno di scontro di classe.
*Transform Italia
Pensare in grande
Stefano Galieni* Si parta dal fatto che il bicchiere referendario va visto come “mezzo pieno”. Che nell’afoso silenzio elettorale, nella melRifondazione Comunista
Verfassungsschutzbericht: Alte Facebook-Linke statt junger TikTok-Nazis
Manuel
in reply to Franc Mac • • •Etica Digitale (Feddit) reshared this.
Fabrizio
in reply to Manuel • • •Etica Digitale (Feddit) reshared this.