Before LCD and LED screens were ubiquitous, there was a time when the cathode ray tube (CRT) was essentially the only game in town. Even into the early 2000s, CRTs were everywhere and continuously getting upgrades, with the last consumer displays even having a semi-flat option. Their size and weight was still a major problem, though, but for a long time they were cutting edge. Wanting to go back to this time with their original Game Boy, [James Channel] went about replacing their Game Boy screen with a CRT.

The CRT itself is salvaged from an old video conferencing system and while it’s never been used before, it wasn’t recently made. To get the proper video inputs for this old display, the Game Boy needed to be converted to LCD first, as some of these modules have video output that can be fed to other displays. Providing the display with power was another challenge, requiring a separate boost converter to get 12V from the Game Boy’s 6V supply. After getting everything wired up a few adjustments needed to be made, and with that the CRT is up and running.

Unfortunately, there was a major speed bump in this process when [James Channel]’s method of automatically switching the display to the CRT let the magic smoke out of the Game Boy’s processor. But he was able to grab a replacement CPU from a Super Game Boy, hack together a case, and fix the problem with the automatic video switcher. Everything now is in working order for a near-perfect retro display upgrade. If you’d like to do this without harming any original hardware, we’ve seen a similar build based on the ESP32 instead.

youtube.com/embed/irHI_2WdQXc?…

Thanks to [Lurch] for the tip!

One of the most sought after substances in the Universe is water – especially in its liquid form – as its presence on a planet makes the presence of life (as we know it) significantly more likely. While there are potentially oceans worth of liquid water on e.g. Jupiter’s moon Europa, for now Mars is significantly easier to explore as evidenced by the many probes which we got onto its surface so far. One of these was the InSight probe, which was capable of a unique feat: looking inside the planet’s crust with its seismometer to perform geophysical measurements. These measurements have now led to the fascinating prospect that liquid water may in fact exist on Mars right now, according to a paper published by [Vashan Wright] and colleagues in PNAS (with easy-read BBC coverage).

InSight’s mission lasted from November 2018 to December 2022 by which time too much dust had collected on its solar panels and communication was lost. During those active years it had used its seismometer (SEIS) to use the vibrations from natural marsquakes and similar to map the internals of the planet. Based on rock physics models and the data gathered by InSight, there is a distinct possibility that significant liquid water may exist in Mars’ mid-crust, meaning at a depth of about 11.5 to 20 km. Most tantalizing here is perhaps that at these depths, enough liquid water may exist today than may have filled Mars’ past oceans.

Since we’re talking about just a single lander with a single instrument in a single location, it would be highly presumptuous to draw strong conclusions, and at these depths we would have no means to access it. Even so, it would offer interesting ideas for future Mars missions, not to mention underground Mars bases.

As battery-to-grid and vehicle-to-home technologies become increasingly mainstream, the potential for repurposing electric vehicle (EV) batteries has grown significantly. No longer just a niche pursuit, using retired EV batteries for home energy storage has become more accessible and appealing, especially as advancements in DIY solutions continue to emerge. Last year, this project by [Dala] showcased how to repurpose Nissan Leaf and Tesla Model 3 battery packs for home energy storage using a LilyGO ESP32, simplifying the process by eliminating the need for battery disassembly.

In the past few months, this project has seen remarkable progress. It now supports over 20 different solar inverter brands and more than 25 EV battery models. The most exciting development, however, is the newly developed method for chaining two EV packs together to create a single large super-battery. This breakthrough enables the combination of, for example, two 100kWh Tesla packs into a massive 200kWh storage system. This new capability offers an accessible and affordable way to build large-scale DIY home powerwalls, providing performance that rivals commercial systems at a fraction of the cost.

With these advancements, the possibilities for creating powerful, cost-effective energy storage solutions have expanded significantly. We do however stress to put safety first at all times.

Hungry for more home powerbanks? We’ve been there before.

youtube.com/embed/skBhH_EwBUE?…

Microsoft Corporation ha riferito che l’Iran sta intensificando i suoi tentativi di interferire nelle prossime elezioni presidenziali americane. Il rapporto, pubblicato il 9 agosto, descrive come gli hacker di stato si stiano preparando a diffondere notizie false e cercando di accedere agli account dei candidati.

Uno degli episodi descritti nel rapporto è un attacco di phishing contro un collaboratore della campagna elettorale di uno dei partiti.

2 mesi fa gli è stata inviata una lettera per conto di un ex consulente il cui account era stato precedentemente compromesso. È stato effettuato anche un tentativo di hackerare l’account di uno degli ex candidati alla presidenza. Microsoft non rivela i nomi degli obiettivi.

In totale, il rapporto menziona le attività di quattro diversi gruppi di hacker, ognuno dei quali opera a modo autonomo. Una campagna di notizie false ha preso di mira entrambi i lati dello scacchiere politico.

Recentemente, uno dei gruppi ha violato le risorse interne della campagna di Trump e ha rubato documenti riservati, incluso un dossier su James David Vance. Inoltre si è verificato un caso di compromissione del conto di un dipendente a livello di governo distrettuale. Secondo gli esperti Microsoft, questo incidente faceva parte di un’operazione più ampia.

Gli analisti di Microsoft notano che la crescente attività degli hacker iraniani riflette la loro tattica caratteristica: iniziare a interferire nelle elezioni più tardi rispetto agli altri attori. Secondo il Microsoft Threat Intelligence Center, gli attacchi informatici dell’Iran sono più mirati a interferire con il processo elettorale stesso piuttosto che a cercare di influenzare le opinioni degli elettori.

Clint Watts, direttore generale del Centro, ha osservato che le azioni degli hacker iraniani possono essere divise in due tipologie. Il primo tipo prevede campagne che mirano a suscitare polemiche e influenzare gli elettori negli stati indecisi con questioni elettorali scottanti. Il secondo tipo di attività si concentra sulla raccolta di informazioni sulle campagne politiche, che possono poi essere utilizzate per affinare le strategie.

Il rapporto menziona che una delle piattaforme di notizie false scoperte da Microsoft si rivolgeva al pubblico liberale e chiamava Donald Trump un “elefante oppioide in un negozio di porcellane”. Un’altra piattaforma, rivolta ai conservatori, si è concentrata sulla riassegnazione di genere e su altre questioni LGBT. Entrambe le piattaforme sono state create da uno dei gruppi iraniani.

Watts ha inoltre sottolineato che un altro gruppo di hacker potrebbe prepararsi ad azioni più estreme. I personaggi politici o le comunità possono dover affrontare minacce e provocazioni. L’obiettivo finale di queste azioni sarà quello di creare caos, minare l’autorità e seminare dubbi sull’integrità delle elezioni.

In precedenza il governo americano aveva già accusato gli iraniani di aver tentato di interferire nelle elezioni. Uno dei più famosi è stato il caso del gruppo di estrema destra Proud Boys: per suo conto gli hacker iraniani hanno inviato lettere agli elettori democratici.

Altri rapporti Microsoft di quest’anno hanno evidenziato anche i tentativi della Cina di utilizzare l’intelligenza artificiale per influenzare le elezioni.

L'articolo Microsoft Avverte: L’Iran Intensifica gli Attacchi Hacker contro le Elezioni Presidenziali USA proviene da il blog della sicurezza informatica.

A StreamDeck is effectively a really cool box full of colorful buttons that activate various things on your PC. They’re fun and cool but they’re also something you can build yourself if you’re so inclined. [Jason] did just that for his sim racing setup, and he included some nifty old-school tech as well.

An ESP32 is at the core of the build, listening to button presses and communicating with the PC. However, the build doesn’t actually use regular buttons. Instead, it uses infrared sensors wired up in a matrix. This was an intentional choice, because [Jason] wanted the device to be reconfigurable with different paper card overlays. There are ways to do this with regular buttons too, but it works particularly well with the infrared technique. Plus, each button also gets a Neopixel allowing its color to be changed to suit different button maps.

What’s really neat is that the button maps change instantly when a different overlay card is inserted. [Jason] achieved this with an extra row of infrared sensors to detect punched holes in the bottom of the overlay cards.

Once upon a time, even building your own keyboard was an uphill battle. Today, it’s easier than ever to whip up fun and unique interface devices that suit your own exact needs. That’s a good thing! Video after the break.

youtube.com/embed/CaWsJdYNwyQ?…

Construction kit toys are cited by many adults as sparking great creativity and engineering talent in their youth. LEGO, Meccano, K’NEX, Lincoln Logs—these are all great commercial options. But what about printing your very own construction kit at home? Meet Stemfie.

Fundamentally, Stemfie isn’t that different from any other construction kit you might have seen before. It has various beams and flat plates that are full of holes so they can be assembled together in various ways. It also uses bolts, spacers, and small plastic nuts that can be tightened using a special hand tool. Think of a mixture between LEGO Technic and Meccano and that will get you in the ballpark. It includes neat motion components too, including gears, wheels, and even a large flat spring!

What can you build with it? Well, as every construction kit toy says, you’re only limited by your imagination! However, if your imagination is especially small, you can just use the Stemfie 3D YouTube channel for inspiration. It features everything from a ping pong ball catapult to a rubber-band driven car. Plus, since it’s all 3D printed, you can simply scale up the parts and build even bigger designs. Like a giant catapult that can hurl entire water jugs. Fun!

We’ve seen other projects in this vein before. One of our favorites is [Ivan Miranda]’s giant 3D printed assembly kit that he uses to build big monster toys.

youtube.com/embed/8AIVcwuRmV4?…

youtube.com/embed/FtJwLNqRd8E?…

I want to introduce you to a project of mine – a portable router build, and with its help, show you how you can build a purpose-built device. You might have seen portable routers for sale, but if you’ve been in the hacking spheres long enough, you might notice there are “coverage gaps”, so to speak. The Pi-hole project is a household staple that keeps being product-ized by shady Kickstarter campaigns, a “mobile hotspot” button is a staple in every self-respecting mobile and desktop OS, and “a reset device for the ISP router” is a whole genre of a hacker project. Sort the projects by “All Time” popularity on Hackaday.io, and near the very top, you will see an OpenVPN &Tor router project – it’s there for a reason, and it got into 2014 Hackaday Prize semifinals for a reason, too.

I own a bunch of devices benefitting from both an Internet connection and also point-to-point connections between them. My internet connection comes sometimes from an LTE uplink, sometimes from an Ethernet cable, and sometimes from an open WiFi network with a portal you need to click through before you can even ping anything. If I want to link my pocket devices into my home network for backups and home automation, I can put a VPN client on my laptop, but a VPN client on my phone kills its battery, and the reasonable way would be to VPN the Internet uplink – somehow, that is a feature I’m not supposed to have, and let’s not even talk about DNSSEC! Whenever I tried to use one of those portable LTE+WiFi[+Ethernet] routers and actively use it for a month or two, I’d encounter serious hardware or firmware bugs – which makes sense, they are a niche product that won’t get as much testing as phones.

I’ve come to hate these little boxes with a passion. By [www.digitalpush.net], CC BY 4.0Solving these problems and implementing my desired features is quite motivational for me – it’s not just that I need my devices to work for me, it’s also that every time I tackle a project like this, I push some cool tech boundaries, find out a number of fun things I can share with you all, and I end up creating yet another device I use to significantly improve my life. What’s more, routers are a sea of proprietary hardware coupled to proprietary software, and it shows. The Pi-hole project is about cutting profit margins, and the Tor network, so you won’t see them on a commercial device. Your Huawei portable router’s battery died? Good luck sourcing a replacement. Router randomly shutting down because of overheating? Either do something and lose your warranty, or send it away for repair for weeks with no guarantee of having it fixed, and stars help you if it’s made by Asus.

Feature Plan

I need a router with an always-on WiFi AP, LTE, Ethernet and an optional WiFi station interface. As for software, I need it to run a lightweight VPN client like Wireguard and route my traffic through it, as well as run a bunch of quality-of-life features – from reasonable static IP allocation and DNS configurability, to captive portal auto-clicking and DNSSEC. The best part about building your hardware is that you can pick your batteries and can choose cells as large as you desire, so it shouldn’t be hard to make it last a day, either.

You also get to pick your own CPU, LTE modem, power management circuits. Thankfully, I have building blocks for most of these, and I’ve discussed them before – let’s talk CPUs first, and next time, go into LTE modem selection.

You might have seen fun boards throughout the last decade – a half-a-GHz CPU, from 64 to 512 MB of external RAM, WiFi and Ethernet interfaces done in hardware, an SPI flash for firmware, a bunch of GPIOs, OpenWRT shipped by default, and no video output interface in sight. You might have bought one for a generic Raspberry Pi grade project, misunderstanding its purpose. It’s a a router CPU board, put into a maker-friendly form-factor – tt will work wonders for routing packets, but it won’t work well for streaming video. I know, because I bought my first board ever with the intention of running mjpg-streamer on it, and as soon as I set it to a reasonable resolution, the CPU went to 100% consumption in a heartbeat.

Perhaps one of the most promising “router CPU” modules to this day. By [Pinguinguy], CC0 1.0There are plenty of boards like this around – the VoCore, the Carambola boards, the BlackSwift boards I keep nostalgically remembering, LinkIt boards, and the Onion Omega modules. Of these, to the best of my knowledge, the Onion Omega 2 is the most up-to-date of them all, so I got one for cheap locally with a breakout – despite their name, they have nothing to do with Tor routing, though I do aim to change that. The Omega-designed breakout is underwhelming in my eyes – they used a powerbank IC to add battery backup functionality, with all the inefficiency and bugs that entails. As you might already know, you literally don’t need to do that.

Still, it ships with OpenWRT, it’s reasonably open, and it’s got everything I need. I started this project in 2018, but thankfully, I picked well – the Onion Omega repositories are active to this day, which means that, to this day, I can resume my project by just reflashing OpenWRT to a newer version; if you don’t do this, you can’t use the repositories meaningfully, which is a large part of the fun!
Want to prototype a project that contains multiple components? Just tape them to a piece of board while you map it out and test things together!
Could you pick something more powerful? Yes, absolutely – a Raspberry Pi would have a beefier CPU for anything I’d want to hack – in fact, many boards today can boast a faster CPU and better peripherals. My hunch, however, is that native WiFi and Ethernet are an important thing to have – I don’t want to go full USB for everything I need, lest I get throttled by the 480 Mbps restriction. Also, I do want to make sure the module I pick is well-suited for the task in aspects I might not even foresee yet, and it just feels right to use a router CPU.

In short, I’m cool with throttling my Internet uplink in some ways, as long as this gives me a bunch of cool features in return; later on, I can do a market review and see if there’s a more suitable board I could integrate, but until then, I see no boards like this. Do you have better CPU board suggestions for a portable router? Drop them in the comments down below.

Choice Outcomes

So, this is what I set out to do – use an Onion Omega as my personal WiFi repeater, for now, without an LTE uplink integrated. I’ve used it as my portable router, in a half-complete configuration, and here’s what I found. First off, the WiFi adapter allows combined STA (station=client) and AP (access point=hotspot) mode – something that might feel like a pretty nifty feature to you, and it did to me. Initially, I thought this would allow me to do WiFi forwarding easily – and it did, but as soon as I leave the house with the router in my backpack and the STA mode goes inactive, things break.
Test setup, creating an access point with an Ethernet uplink. With two 18650 cells, no LTE enabled, it works for about 20 hours.
Here’s a bug – if you expect an always-on AP and an occasionally active STA, your AP will be regularly glitching out, at least on the Onion Omega, and this is a fundamental problem that might translate into other hardware too. This is because, whenever the STA interface is disconnected, it needs to periodically re-scan the network to see if it needs to reconnect to an AP. Your WiFi radio needs to stop and drop what it’s doing, including any ongoing transmissions, and listen to the aether for a while – switching between different channels while at it. This is very noticeable when doing live audio or video streaming; if you do a local file transfer over the AP’s network and the transfer speed is plotted, there will be visible gaps in the transmission speed.

First lesson – scrutinize cool features like the combined STA+AP modes if you’re actually building a network you want to rely on, especially if you don’t see them – you will notice that many devices don’t come with STA+AP simultaneous connection support out of the box. Sharing an antenna for two different purposes at once feels like an error-prone situation, and if you’re having a connectivity problem, you will want to look into that.

Is the hardware support ideal? No. Is this fun so far? Yes, absolutely, and it gives some cool insights into features you might consider worth building your project around. Does this router beat the performance of a Huawei battery-powered router I used to carry in my pocket? Yep, it already has quite a few important features I always wanted to have, like static IP assignments and an Ethernet port I can use for an uplink. Now, it doesn’t have LTE just yet – let’s talk about that in the next article, showing you how to pick an LTE modem, and what can you do to make the process significantly easier for you.

slowforward.net/2024/08/13/ins…

slowforward

2024-08-13 10:31:16

installance n. : # 0189type : asemic square size : ~ cm 6 x 6record : lowres shotadditional notes : abandoneddate : Aug 6th, 2024time : 4:31pmplace : Rome, via Lancianofootnote : ---copyright : (CC) 2024 differx
.

slowforward.net/2024/08/13/ins…

#000000 #0189 #abandoned #asemic #asemicSquare #card #i0189 #installance #installance0189

installance #0189: asemic square

  installance n. : # 0189 type : asemic square size : ~ cm 6 x 6 record : lowres shot additional notes : abandoned date : Aug 6th, 2024 time : 4:31pm place : Rome, via Lanciano footnote : — c…

^slowforward

slowforward.net/2024/08/13/the…

slowforward

2024-08-13 08:01:50

bopsecrets.org/

bopsecrets.org/comics/return.h…

_
e ci sono anche…

Testi in Italiano

(Text in Italian)

Riflessioni preliminari sulla Guerra del Vietnam (Ngo Van, 1968)
Sulle lotte del Terzo Mondo (Ngo Van, 1968)
In questo teatro… (1970)
Ode sull’assenza di vera poesia oggi questo pomeriggio (1970)
Doppia riflessione (1974)
Avviso riguardo la società dominante e coloro che la contestano (1974)
I ciechi e l’elefante (1975)
La società del situazionismo (1976)
La realizzazione e la soppressione della religione (1977)
Lettera aperta al gruppo “Libertaire” di Tokio (1977)
La breccia in Iran (1979)
Banalità (1979)
La guerra e lo spettacolo (1991)
Sul film di René Viénet: Può la dialettica spezzare i mattoni? (1992)
Due saggi critici sul buddismo impegnato (1993 & 1999)
Confessioni di un garbato nemico dello stato (1997):
parte 1
parte 2
parte 3
Corrispondenza sulla questione della religione (1997-2000)
Riformismo y politica elettorale (2002)
Introduzione ai film di Guy Debord (2003)
Risposta ad un liberale del Midwest (2003)
Porta d’ingresso ai vasti domini (Introduzione) (2004)
Comprendere Debord dialetticamente (2005/2010)
Riflessioni sulla sollevazione in Francia (2006)
Documenti della sollevazione anti-CPE in Francia (2006)
Opinioni francofone sull’Ufficio dei Segreti Pubblici (2007-2008)
Ken Knabb, l’Internazionale Situazionista e la controcultura nord-americana (Jean-Pierre Depétris, 2008)
Introduzione al libro di Ngo Van In the Crossfire: Adventures of a Vietnamese Revolutionary (2010)
Nota sullo stalinismo e sul trotskismo (2010)
Il risveglio in America (2011)
Al di là del voto (2012/2016)

slowforward.net/2024/08/13/the…

#000000 #anarchy #archive #bureauOfPublicSecrets #dance #durruti #ffffff #internationalSituationist #KennethRexroth #Situationism #situationistInternational #Situazionismo

the ‘bureau of public secrets’: an astounding (situationist) archive

_ e ci sono anche…

^slowforward

slowforward.net/2024/08/13/the…

slowforward

2024-08-13 07:31:41

bopsecrets.org/rexroth/prelite…

bopsecrets.org/rexroth/prelite…

slowforward.net/2024/08/13/the…

#000000 #anthology #KennethRexroth #poems #poetry #preLiterate

the poetry of pre-literate peoples

 

^slowforward

Gaming laptops often tend towards implementing more desktop-like hardware in the pursuit of pure grunt. But what if you were to simply buy desktop hardware yourself, and build your own gaming laptop? That would be very cool, as [Socket Science] demonstrates for us all.

The project began with lofty goals. The plan wasn’t to build something rough and vaguely laptop-like. [Socket Science] wanted to build something of genuine quality, that for all intents and purposes, looked and worked like a proper commercial-grade laptop. Getting to that point took a full 14 months, but the final results are impressive.

Under the hood lies an AMD Ryzen 5 5600X and a XFX Radeon RX6600, hooked into an ITX motherboard with some low-profile RAM sticks. Those components were paired with a thin keyboard, a touchpad, and a portable gaming monitor. Getting all that into a thin laptop case, even a custom one, was no mean feat. Ports had to be cut down to size, weird ribbon cables had to be employed, and heatsinks and coolers had to be rearranged. To say nothing of all the work to 3D print a case that was strong and actually worked!

The full journey is quite the ride. If you want to go right back to the start, you can find part one here.

We’ve seen some builds along these lines before, but seldom few that get anywhere near this level of fit and finish. Oftentimes, it’s that kind of physical polish that is most difficult to achieve. All we can say is “Bravo!” Oh, and… video after the break.

youtube.com/embed/SfUCBTpOvCE?…

Numerose vulnerabilità nell’utilità di trasferimento dati Quick Share possono essere utilizzate per eseguire attacchi MiTM e inviare file a dispositivi Windows senza il permesso del destinatario, hanno affermato gli specialisti di SafeBreach.

Quick Share è un’utilità di condivisione file P2P disponibile per gli utenti di dispositivi con Android, Chrome e Windows. Ti consente di inviare file a dispositivi compatibili nelle vicinanze, supportando Bluetooth, Wi-Fi, Wi-Fi Direct, WebRTC e NFC.

Sviluppata originariamente per Android con il nome Nearly Share e rilasciata per Windows nel luglio 2023, l’utilità è stata ribattezzata Quick Share nel gennaio 2024 dopo che Google ha unito la sua tecnologia con Quick Share di Samsung. Google sta inoltre collaborando con LG per preinstallare l’utilità su alcuni dispositivi Windows.

Gli specialisti di SafeBreach hanno studiato il protocollo a livello di applicazione utilizzato da Quick Share per trasferire file tra dispositivi e hanno immediatamente scoperto 10 vulnerabilità, inclusi problemi che consentono l’esecuzione di codice remoto in Windows.

I bug rilevati includono due errori di scrittura di file remoti non autorizzati in Quick Share per Windows e Android, nonché otto problemi in Quick Share per Windows relativi alla connessione Wi-Fi forzata, all’attraversamento di directory remote e al Denial of Service (DoS).

Questi errori consentono la scrittura di file sul dispositivo in remoto (senza l’autorizzazione dell’utente), causano l’arresto anomalo, reindirizzano il traffico a un punto di accesso Wi-Fi specifico.
Catena di attacco sviluppata dai ricercatori
Ora tutte le vulnerabilità sono già state corrette con il rilascio della versione 1.0.1724.0 e agli errori rilevati vengono assegnati due identificatori comuni: CVE-2024-38271 (5,9 punti sulla scala CVSS) e CVE-2024-38272 (7,1 punti sulla scala CVSS ) nella scala CVSS.

Secondo SafeBreach, il protocollo di comunicazione Quick Share è “altamente generico, contiene classi astratte e di base, nonché una classe di gestione per ciascun tipo di pacchetto… Inoltre, abbiamo scoperto che funziona in qualsiasi modalità. Pertanto, anche se il dispositivo è configurato per accettare file solo dai contatti dell’utente, possiamo comunque inviargli un file che non richiede conferma”, affermano i ricercatori.

Pertanto, una volta installato, Quick Share crea un’attività pianificata che controlla ogni 15 minuti per vedere se l’applicazione è in esecuzione e la avvia se necessario. Gli esperti hanno utilizzato il CVE-2024-38271 per creare una catena RCE: l’attacco MiTM ha permesso loro di rilevare quando i file eseguibili venivano scaricati tramite il browser, quindi gli esperti hanno sfruttato il problema di path traversal per sovrascrivere il file eseguibile con il proprio file dannoso

Attualmente i ricercatori di SafeBreach hanno già pubblicato informazioni tecniche dettagliate sulle vulnerabilità scoperte e ne hanno anche presentato una presentazione alla recente conferenza DEF CON 32 .

L'articolo Attenzione a Google Quick Share! Delle Vulnerabilità Critiche Consentono RCE proviene da il blog della sicurezza informatica.