Salta al contenuto principale



Supercon 2024 Flower SAO Badge Redrawing in KiCad


23591887

Out of curiosity, I redrew the Supercon Vectorscope badge schematics in KiCad last year. As you might suspect, going from PCB to schematic is opposite to the normal design flow of KiCad and most other PCB design tools. As a result, the schematics and PCB of the Vectorscope project were not really linked. I decided to try it again this year, but with the added goal of making a complete KiCad project. As usual, [Voja] provided a well drawn schematic diagram in PDF and CorelDRAW formats, and a PCB design using Altium’s Circuit Maker format (CSPcbDoc file). And for reference, this year I’m using KiCad v8 versus v7 last year.

Importing into KiCad


This went smoothly. KiCad imports Altium files, as I discovered last year. Converting the graphic lines to traces was easier than before, since the graphical lines are deleted in the conversion process. There was a file organizational quirk, however. I made a new, empty project and imported the Circuit Maker PCB file. It wasn’t obvious at first, but the importing action didn’t make use the new project I had just made. Instead, it created a completely new project in the directory holding the imported Circuit Maker file. This caused a lot of head scratching when I was editing the symbol and footprint library table files, and couldn’t figure out why my edits weren’t being seen by KiCad. I’m not sure what the logic of this is, was an easy fix once you know what’s going on. I simply copied everything from the imported project and pasted it in my new, empty project.

While hardly necessary for this design, you can also import graphics into a KiCad schematic in a similar manner to the PCB editor. First, convert the CorelDRAW file into DXF or SVG — I used InkScape to make an SVG. Next do Import -> Graphics in the Kicad schematic editor. However, you immediately realize that, unlike the PCB editor, the schematic editor doesn’t have any concept of drawing layers. As a work around, you can instead import graphics into a new symbol, and place this symbol on a blank page. I’m not sure how helpful this would be in tracing out schematics in a real world scenario, since I just drew mine from scratch. But it’s worth trying if you have complex schematics.

Note: this didn’t work perfectly, however. For some reason, the text doesn’t survive being imported into KiCad. I attribute this to my poor InkScape skills rather than a shortcoming in KiCad or CorelDRAW. Despite having no text, I put this symbol on its own page in sheet two of the schematic, just for reference to see how it can be done.


Just like last year, the footprints in the Circuit Maker PCB file were imported into KiCad in a seemingly random manner. Some footprints import as expected. Others are imported such that each individual pad is a standalone footprint. This didn’t cause me any problems, since I made all new footprints by modifying standard KiCad ones. But if you wanted to save such a footprint-per-pad part into a single KiCad footprint, it would take a bit more effort to get right.

Recreating Schematics and Parts


After redrawing the schematics, I focused on getting the part footprints sorted out. I did them methodically one by one. The process went as follows for each part:

  • Start with the equivalent footprint from a KiCad library
  • Duplicate it into a local project library
  • Add the text SAO to the footprint name to avoid confusion.
  • Position and align the part on the PCB atop the imported footprint
  • Note and adjust for any differences — pad size and/or shape, etc.
  • Update the part in the project library
  • Attach it to the schematic symbols in the usual manner.
  • Delete the imported original footprint (can be tricky to select)

Some parts were more interesting than others. For example, the six SAO connectors are placed at various non-obvious angles around the perimeter. I see that [Voja] slipped up once — the angle between connectors 4 and 5 is at a definitely non-oddball angle of 60 degrees.

23591889
SAO Angle Difference
#1 326 102 6->1
#2 8 42 1->2
#3 61 53 2->3
#4 118 57 3->4
#5 178 60 4->5
#6 224 46 5->6

With all this complete, the PCB artwork consists of all new footprints but uses the original traces. I needed to tweak a few traces here and there, but hopefully without detracting too much from [Voja]’s style. Speaking of style, for those interested in giving that free-hand look to hand-routed tracks in KiCad, check the options in the Interactive Router Settings menu. Choose the Highlight collisions / Free angle mode and set the PCB grid to a very small value. Free sketch away.

Glitches

235918912359189323591895
I used two photos of the actual board to check when something wasn’t clear. One such puzzle was the 3-pad SMT solder ball jumper. This was shown on the schematic and on the fully assembled PCB, but it was not in the Circuit Maker design files. I assumed that the schematics and photos were the truth, and the PCB artwork was a previous revision. There is a chance that I got it backwards, but it’s an easy to fix if so. Adding the missing jumper took a bit of guesswork regarding the new and adjusted traces, because they were hard to see and/or underneath parts in the photo. This redrawn design may differ slightly in appearance but not in functionality.

DRC checks took a little more iterating than usual, and at one point I did something to break the edge cuts layer. The irregular features on this PCB didn’t help matters, but I eventually got everything cleaned up.

I had some trouble sometimes assigning nets to the traces. If I was lucky, putting the KiCad footprint on top of the traces assigned them their net names. Other times, I had traces which I had to manually assign to a net. This operation seemed to work sporatically, and I couldn’t figure out why. I was missing a mode that I remember from another decade in a PCB tool, maybe PCAD?, where you would first click on a net. Then you just clicked on any number of other items to stitch them into the net. In KiCad it is not that simple, but understandable given the less-frequent need for this functionality.

You may notice the thru hole leads on the 3D render are way too long. Manufacturers provide 3D files describing the part as they are shipped, which reasonably includes the long leads. They are only trimmed at installation. The virtual technician inside KiCad’s 3D viewer works at inhuman speeds, but has had limited training. She can install or remove all through hold or SMT parts on the board, in the blink of an eye. She can reposition eight lamps and change the background color in mere seconds. These are tasks that would occupy a human technician for hours. But she doesn’t know how to trim the leads off of thru hole parts. Maybe that will come in future versions.

Project Libraries


I like to extract all symbols, part footprints, and 3D files into separate project libraries when the design wraps up. KiCad experts will point out that for several versions now this is not necessary. All (or most) of this information is now stored in the design files, alghouth with one exception — the 3D files. Even so, I still feel safer making these project libraries, probably because I understand the process.

KiCad can now do this with a built-in function. See the Export -> Symbols to New Library and Export -> Footprints to New Library in the schematic and PCB editors, respectively. These actions give you the option to additionally change all references in the design to use this new library. This didn’t work completely for me, for reasons unclear. Eventually I just manually edited the sch and pcb file and fixed the library names with a search and replace operation.

Hint: When configuring project libraries in KiCad, I always give them a nickname that begins with a dot. For example, .badge24 or .stumbler. This always puts project libraries at the top of the long list of libraries, and it makes it easier to do manual search and replaces in the design files if needed.


What about 3D files, you say? That isn’t built into KiCad, but have no fear. [Mitja Nemec] has you covered with the Archive 3D Models KiCad plugin. It was trivial to activate and use in KiCad’s Plugin and Content Manager.

All Done


In the end, the design passed all DRCs, and I could run Update PCB from Schematic... without errors. I went out on a limb and immediately placed an order for five PCBs, hoping I hadn’t overlooked something. But it’s only US$9.00 risk. They are on the way from China as I type this.

All the files can be found in this GitHub repo. If you find any errors, raise an issue there. I have not done this procedure for any of the SAO petals, but when I do, I will place a link in the repository.
23591897Schematics showing jumper

#1 #5 #2 #4 #3 #6


Dossieraggi e sicurezza nazionale: le lezioni da trarre, le domande aperte


23590110

La recente emersione di un’ampia inchiesta della Procura di Milano che coinvolgerebbe ex operatori delle forze di sicurezza, imprese attive nel campo dell’elaborazione dati, boiardi dell’amministrazione pubblica e altri professionisti ha riacceso un ampio dibattito sulla tutela delle banche dati pubbliche e, al contempo, sulle conseguenze di casi del genere sulla sicurezza collettiva. Partiamo da […]
Continua a leggere

The post Dossieraggi e sicurezza nazionale: le lezioni da trarre, le domande aperte appeared first on InsideOver.



Intelligenza artificiale, pilastro della sicurezza nazionale degli Stati Uniti: quali obiettivi


@Informatica (Italy e non Italy 😁)
L’amministrazione Biden-Harris ha annunciato di aver rilasciato il Memorandum per la Sicurezza Nazionale (National Security Memorandum) sull’intelligenza artificiale, il primo del suo genere.



Machine unlearning: metodi per rimuovere i dati errati dai modelli AI


@Informatica (Italy e non Italy 😁)
Le ricerche sul machine unlearning promettono di risolvere i problemi in termini di violazione della privacy, di bias (pregiudizi) e dell'uso non autorizzato dei dati utilizzati per il training dei modelli di intelligenza artificiale. Ecco di cosa si tratta e le



Come diventare Security consultant: guida a una delle professioni del futuro


@Informatica (Italy e non Italy 😁)
Prevenire e rilevare le minacce, gestire gli attacchi e partecipare a progetti rilevanti per la cyber security. La professione del Security consultant è orizzontale e – anche in Italia – ha un futuro roseo
L'articolo Come diventare Security consultant: guida a una delle professioni del futuro



Chatcontrol ha un nuovo ambasciatore! Magnus "Frater" Brunner sembra il degno successore della Grande Fratella Ylva Johansson

@Privacy Pride

L'Austriaco proposto come Commissario per gli Affari Interni e l'Immigrazione, comparirà in un'audizione organizzata dal Comitato per le Libertà Civili il 5 novembre. Ecco cosa ha detto durante l'audizione del 10 ottobre:

Accesso ai dati per scopi di applicazione della legge
DOMANDA: Come intende affrontare la sfida fondamentale di garantire un accesso efficace ai dati personali al fine di prevenire, rilevare, investigare e perseguire reati penali, rispettando al contempo i principi di necessità e proporzionalità e sostenendo i diritti alla privacy e alla protezione dei dati?
Quali garanzie prevede per garantire la piena conformità alle sentenze della Corte di giustizia europea sulla conservazione dei dati e l'accesso ai dati per scopi di applicazione della legge?
Affronterà anche la crittografia quando propone norme sull'accesso?
Come intende sbloccare la proposta sugli abusi sessuali sui minori online per garantire che il suo obiettivo principale di proteggere i bambini sia soddisfatto e che le preoccupazioni sulla salvaguardia del diritto alla privacy siano affrontate? Qualora non ci fosse un regolamento su questo fascicolo prima della scadenza della seconda proroga del regolamento provvisorio, prevista per il 3 aprile 2026, come intende procedere per evitare il vuoto legislativo?
Risposta: Se confermato, mi impegno a trovare un approccio equilibrato e giuridicamente valido per garantire un accesso efficace ai dati per le forze dell'ordine e la magistratura, rispettando al contempo la privacy e la protezione dei dati, nonché i requisiti di sicurezza informatica e tenendo conto degli aspetti tecnologici. L'UE deve costruire una solida economia digitale che i cittadini possano vedere come porterà prosperità, preserverà la sicurezza e proteggerà i diritti fondamentali. Allo stesso tempo, mentre la società e l'economia diventano digitali, lo fanno anche i criminali, i terroristi e gli altri attori della minaccia, al fine di perseguire attività criminali ed eludere le forze dell'ordine. Al fine di garantire che le autorità competenti siano dotate di capacità moderne e innovative per combattere la criminalità, consentire alle forze dell'ordine di avere un accesso proporzionato ai dati è fondamentale per collegare i crimini agli autori, supportare le indagini, proteggere le vittime e smantellare le reti criminali. Tuttavia, oggi, le barriere legali e tecniche, insieme alla mancanza di leggi armonizzate sulla conservazione dei dati negli Stati membri, ostacolano le indagini nazionali e complicano la cooperazione transfrontaliera. Nonostante queste sfide, sono convinto che possiamo trovare soluzioni efficienti e a prova di futuro per facilitare l'accesso legale alle informazioni digitali. Ciò è essenziale per proteggere i nostri cittadini e sostenere lo stato di diritto, nel pieno rispetto dei principi di necessità e proporzionalità.

Allo stesso tempo, dobbiamo evitare di introdurre nuove vulnerabilità che possono essere sfruttate da attori malintenzionati o di mettere in discussione i vantaggi della crittografia. Dobbiamo trovare un equilibrio che ci consenta di salvaguardare la privacy, garantendo al contempo sicurezza e protezione dei nostri cittadini e delle nostre società dalle minacce in continua evoluzione.
Il gruppo di alto livello sull'accesso ai dati per le forze dell'ordine ha definito le esigenze operative delle forze dell'ordine e delle autorità giudiziarie e le raccomandazioni includono una serie di misure diverse, come il rafforzamento delle capacità, la cooperazione con l'industria, la standardizzazione e la legislazione. Dovrebbero costituire un prezioso contributo per il lavoro in quest'area, che richiede una valutazione d'impatto approfondita.

La criminalità e l'insicurezza hanno un effetto soffocante sulla società e, se non affrontate correttamente, impediscono alle persone di esercitare le proprie libertà, di esprimere la propria opinione o di camminare per strada comodamente. Le minacce possono anche essere più dirette non solo offline, ma anche online. I bambini sono particolarmente a rischio e dobbiamo fare di più per proteggerli da molteplici rischi che vanno dal cyberbullismo alla sextortion, dalle dipendenze online alla radicalizzazione. Sono convinto della necessità e dell'urgenza di adottare il regolamento proposto per prevenire e combattere l'abuso sessuale sui minori online. Nel 2010, sono state segnalate circa 1 milione di segnalazioni di materiale di abuso sessuale sui minori e di adescamento online. Entro il 2023, sono state segnalate più di 36 milioni. L'attuale regolamento "provvisorio", che consente il rilevamento volontario di abusi sessuali su minori da parte dei fornitori di determinate piattaforme online, scadrà nell'aprile 2026. Senza le norme a lungo termine proposte, tale forma di rilevamento che ha contribuito a salvare i bambini e a identificare i trasgressori per oltre 10 anni sarà vietata nell'UE. Credo che possiamo e dovremmo trovare un modo fattibile per finalizzare i negoziati sul regolamento in sospeso affinché entri in vigore in tempo prima della scadenza del regolamento provvisorio.

Se confermato, mi impegno a lavorare anche per finalizzare i negoziati sulla revisione della direttiva sulla lotta all'abuso sessuale sui minori. La direttiva integra il regolamento e fornisce uno standard comune per le indagini e le azioni penali, armonizzando le definizioni di reati e sanzioni. È una parte essenziale dell'equilibrio che la nostra società esige dal mondo digitale.

elections.europa.eu/european-c…





Microsoft said it would retire its AI-powered gender classifier in 2022. Now it says some users still had access to it because of an error.#News
#News


By documenting her transition every week on Instagram this artist shows the absurdity in how Instagram and AI classify gender and the human body.#News
#News


Il Governo è (giustamente) indignato con Elkann, ma intanto taglia dell’80% il Fondo Automotive


@Politica interna, europea e internazionale
Oggi molti quotidiani – non quelli del Gruppo Gedi, di proprietà della Exor – riportano in prima pagina lo sfogo della presidente del Consiglio Giorgia Meloni contro John Elkann, presidente di Stellantis, colpevole di aver rifiutato l’invito della Camera



#EuGoingDark surveillance plan: timeline, agenda, background


Highly controversial, non-transparent and rarely questioned: the Commission and Council of the European Union are currently preparing a new, EU-wide digital surveillance package. The plan includes the reintroduction and expansion of the retention of citizens’ communications data as well as specific proposals to undermine the secure encryption of data on all connected devices, ranging from cars to smartphones, as well as data processed by service providers and data in transit.

Behind closed doors the Commission has announced it is already preparing impact assessments and an implementation plan.

Former Pirate Party MEP and digital freedom fighter in the European Parliament Patrick Breyer comments:
“The plan is still widely unknown among citizens, journalists and politicians, even though we hold the documents in our hands and the extent of the plans is frightening. A number of questions remain unanswered.”

Documents

Landing page about the »High-Level Group (HLG) on access to data for effective law enforcement« provides background information, press reports, documents and my view on the group’s plan.

Timeline

From September 2024 onward:

Open questions

  • Who participated in the meetings of the #EuGoingDark group and its sub-groups? Participant lists are still undisclosed. Mullvad VPN has reported that at least one former US secret service official has participated.
  • Why were digital rights NGOs such as EDRi not invited to the meetings of the working group even when the group‘s website says it is an “collaborative and inclusive platform for stakeholders from all relevant sectors“?
  • Why aren‘t the group and its sub-groups registered in the Register of Commission Expert Groups and other similar entities (i.e. consultative entities) which would provide for significantly more transparency?
  • How do the new EU Commissioners directly and indirectly involved in the issues concerned, the European Ombudsman, the data protection authorities of the EU and the member states, IT security experts, consumer protection organisations and others assess the working methods and plans of the #EuGoingDark-group?

Contacts to the group

European Commission
Directorate-General Migration & Home Affairs
46 Rue de Luxembourg | B-1049 Brussels | Belgium
E-Mail: EC-HLG-GOING-DARK [:at:] ec.europa.eu.

Olivier Onidi
Deputy Director General
Directorate-General for Migration and Home Affairs
European Commission


patrick-breyer.de/en/eugoingda…


🇬🇧 I received fully ■■■■■■ redacted participant lists of the EU’s #GoingDark anti-encryption group that is also forging plans for resurrecting #DataRetention.

👋 EU Commission
, name those responsible now!
fragdenstaat.de/a/288508 @EP_GreensEFA




PODCAST. Hezbollah. Naim Qassem, leader di basso profilo, ma nella continuità di Nasrallah


@Notizie dall'Italia e dal mondo
Qassem non è un esponente di spicco politico e religioso, tuttavia potrebbe rivelare delle inaspettate doti di leader in un momento molto delicato per il suo movimento e il Libano sotto attacco israeliano
L'articolo PODCAST.



MESSICO. Due giornalisti uccisi in meno di 24 ore


@Notizie dall'Italia e dal mondo
La giornalista Patricia Ramirez, conosciuta con il nome d'arte di Paty Bunbury, è stata uccisa mercoledì 30 ottobre. Mauricio Cruz Solís è stato assassinato poche ore prima in un agguato armato per le strade del centro di Uruapan, nel Michoacán
L'articolo MESSICO. Due giornalisti uccisi in meno di 24 ore



Un paio d'ore fa è stato inviato agli iscritti il nuovo numero di Magda, la newsletter di Centrum Report dedicata all'Europa Centrale. Per chi non la conoscesse, Magda è quel posto in cui segnaliamo i nostri lavori e i nostri interventi sui media (di solito la radio, ma a volte capita di fare capolino anche in tv).

Magda è anche lo spazio delle segnalazioni culturali. Questo mese ad esempio parliamo dell'inaugurazione della sede permanente del Museo di Arte moderna a Varsavia, e potrete anche scoprire chi ha vinto il premio Nike, il più importante riconoscimento letterario polacco.

Un motivo in più per leggere la Magda di questo mese è che c'è il link al nuovo longform uscito su Centrum Report, a firma di Salvatore Greco.

Insomma, il consiglio che vi do è quello di iscrivervi (gratuitamente si intende) per ricevere i prossimi numeri nella casella di posta. Altrimenti potete trovare Magda al seguente link:

substack.com/home/post/p-15094…

reshared this



GAZA. “Beit Lahiya destavata dalle bombe, senza cibo e acqua”


@Notizie dall'Italia e dal mondo
L'allarme è stato lanciato dalla municipalità della città del nord di Gaza sotto attacco delle forze israeliane. Ottobre è stato il mese in assoluto con meno ingressi di aiuti umanitari nella Striscia
L'articolo GAZA. “Beit Lahiya destavata dalle bombe, senza cibo e acqua” proviene da



Tecnologia e Difesa, l’esperienza Usa come ispirazione per l’Italia. Parla Perego

@Notizie dall'Italia e dal mondo

[quote]Può il modello statunitense di stretta collaborazione tra le imprese private e le istituzioni della Difesa per l’innovazione delle Forze armate rappresentare un esempio virtuoso anche per il nostro Paese? Lo abbiamo chiesto al sottosegretario alla Difesa, Matteo Perego di Cremnago, rientrato da



Disinformazione russa: cosa ci ha insegnato il blackout di Internet del 30 gennaio 2024

L'articolo proviene da #Euractiv Italia ed è stato ricondiviso sulla comunità Lemmy @Intelligenza Artificiale
Il 30 gennaio 2024, per un breve periodo, internet è andato in down in tutta la Russia: per due ore, dalle 20:00 alle 22:00 ore locali, è stato

reshared this



La crisi del ceto medio è all’origine della crisi della Politica

@Politica interna, europea e internazionale

Da Kamala Harris negli Stati Uniti a Emmanuel Macron in Francia, in tutti i paesi d’Occidente capita che sotto elezioni ci si ricordi delle difficoltà del ceto medio e a questi si guardi con particolari speranze e relative promesse elettorali. Di ceto medio hanno parlato anche i




@RaccoonForFriendica new version 0.1.0-beta16 available for testing!

Changelog:
🦝 added an option in Settings to disable automatic image loading;
🦝 initial loading optimization;
🦝 dependency updates.

@Thomas @Kristian I prioritized your feedback since the next thing in my roadmap is quite big (UnifiedPush integration) and it would have taken too long if I had waited for it.

Let me know if things are better now and #livefasteattrash!

#friendica #friendicadev #androidapp #androiddev #fediverseapp #raccoonforfriendica #kotlin #multiplatform #kmp #compose #cmp #opensource #procyonproject

in reply to 𝔻𝕚𝕖𝕘𝕠 🦝🧑🏻‍💻🍕

Thank you for your work.
After the update from .13 to .16 I could now also log in to utzer.friendica.de
So far it looks good and I can see everything so far.

For more detailed help I am unfortunately a noob
@raccoonforfriendicaapp@poliverso.org@cantences@anonsys.net@z428@loma.ml

Unknown parent



OGGI, 31 OTTOBRE, NEL VII SECOLO


Sensitive content

Storia reshared this.



200 carabinieri formeranno le forze di polizia palestinesi?


Immagine/foto

Il ministro della Difesa italiano, Guido Crosetto, e l’omologo d’Israele Yoav Gallant hanno parlato a Gerusalemme del “futuro di Gaza”.
Lo ha detto lo stesso Crosetto durante la visita istituzionale in Israele, spiegando di aver discusso con Gallant della “necessità che la comunità internazionale si faccia carico di portare aiuti umanitari, ma anche di pensare al futuro, a una Gaza libera da Hamas. Anche in questo l’Italia si è detta disponibile a giocare un proprio ruolo. Per questo abbiamo parlato anche della possibilità dei nostri 200 Carabinieri che formino le forze di polizia palestinesi. Un incontro a 360 gradi nel quale ho ribadito a tutti come obiettivo quello di far terminare la guerra e riportare la pace in questo luogo”.

Il ministro italiano ha parlato anche del “futuro della missione Unifil: quello di implementare” la risoluzione 1701 del Consiglio di sicurezza delle Nazioni Unite", , sottolineando la necessità che nei prossimi anni sia garantito che “questa risoluzione sia applicata, quindi che non ci siano insediamenti di Hezbollah in quella zona, che ci siano soltanto le forze dell’Onu e le forze armate libanesi a garantire la pace e il fatto che tra i due paesi (Libano e Israele) non ci sia la guerra”.

Per saperne di più sulle missioni all'estero dei carabinieri: carabinieri.it/arma/arma-all%2…



Mastodon, due anni dopo. Un bilancio a due anni di distanza dalla prima grande esplosione mediatica


Proprio come nel 2017, molte persone che si sono riversate su Mastodon dopo l'acquisizione di Twitter da parte di Apartheid Clyde nell'ottobre 2022 hanno avuto grandi esperienze su Mastodon... ma la maggior parte no. Alcuni (soprattutto le persone di colore) hanno avuto esperienze davvero orribili. Nel giro di pochi mesi, l'ottimismo e l'eccitazione si sono trasformati in delusione e frustrazione.

Perché? Sfide di usabilità e onboarding, razzismo e sessismo e altri problemi culturali, mancanza di strumenti per proteggere se stessi...

Il post di @The Nexus of Privacy

privacy.thenexus.today/mastodo…

@Che succede nel Fediverso?

reshared this



Immergersi nel mondo di Lemmy. Dopo l'articolo Il mio blog ora ha commenti su Lemmy ecco il nuovo post di @kiko


«È tutto un po' diverso da Mastodon, ma è principalmente perché qui devi avere a che fare con un altro livello, le community»

«Ciò per cui trovo una soluzione davvero buona, però, è il modo in cui i commenti sono collegati tra loro, o meglio, come questo si riflette nella risposta. Wherever parent_id è utilizzato in altri oggetti, un commento ha un "percorso'' con un elenco separato da punti di tutti gli ID dei commenti fino al commento corrente, a partire da 0.»

@Che succede nel Fediverso?

kiko.io/post/Diving-Into-the-W…

Questa voce è stata modificata (10 mesi fa)



The Fediverse Schema Observatory helps to improve interoperability, the botsin.space server will shut down, and more.


Last Week in Fediverse – ep 90

The Fediverse Schema Observatory helps to improve interoperability, the botsin.space server will shut down, and more.

The News


The Fediverse Schema Observatory is a new project by Darius Kazemi, who runs the Hometown fork of Mastodon as well as co-wrote to Fediverse Governance paper this year with Erin Kissane. The Observatory collects data structures from the fediverse; it looks how different fediverse softwares use and implement ActivityPub. It explicitly does not gather any personal data or posts; instead it looks at how the data is formatted in ActivityPub. ActivityPub and the fediverse has a long-standing problem in that the selling point is interoperability between different software, but every software has their own, slightly different implementation of ActivityPub, making good interoperability difficult to pull off. Kazemi has posted about the Observatory as a Request for Comments. The Observatory is explicitly not a scraper, but considering how sensitive the subject can be in the fediverse community, Kazemi has taken a careful approach of informing the community in detail beforehand about the proposed project, and how it deals with data. The easiest way to see and understand how the Observatory is works is with this demo video.

The botsin.space Mastodon server for bots will shut down in December. The botsin.space server is a server dedicated to running bots, with a few thousand active bots running. The server is a valued part of the community, with the wild variety of bots running on the server contributing to the Mastodon in both useful and silly ways. The admin states that over time running the servers has become too expensive over time, and that is was not feasible to keep the project going. The shutdown of botsin.space showcases an ongoing struggle in the fediverse, running a server is expensive and time-consuming, and every time a server shuts down the fediverse loses a block of its history.

Sub.club is a way to add monetization options to fediverse posts. Sub.club started with being able to add paywalls to Mastodon posts, recently expanded to long-form writing with support for Write.as, and now has added support for WordPress blogs as well. Sub.club has posted a tutorial on how to add the plugin to WordPress, making it an easy system to set up.

Bridgy Fed, the bridge between ActivityPub and ATproto has gotten some updates, with the main new feature is that you can now set custom domain handles on Bluesky for fediverse accounts that get bridged into Bluesky. This brings the interoperability between the networks closer to native accounts, and makes having a bridged account more attractive.

Upcoming fediverse platform for short-form video, Loops, got some press by The Verge and TechCrunch. Creator Daniel Supernault said that there are now 5k people on the waiting list, and that a TestFlight link will go out soon for the first 100 people. An Android APK will be made available at some point as well.

GoToSocial is working on the ability to for servers to subscribe to allowlists and denylists. This makes it easier to create clusters of servers with a shared allowlist, such as the Website League. As I recently wrote about Website League, it is a cluster of federating servers that uses ActivityPub but exists separately from the rest of the fediverse, and it is started by people who build a new shared space after Cohost shut down. Website League servers predominantly use GoToSocial or Akkoma, and have been actively working on tuning the software to meet their needs.

The Links


That’s all for this week, thanks for reading!

#fediverse

fediversereport.com/last-week-…




Some big news for Bluesky this week, as they raise $15M in their series A. Another new option to import your old tweets into Bluesky, and more.


Last Week in the ATmosphere – Oct wk 5

Some big news for Bluesky this week, as they raise $15M in their series A. Another new option to import your old tweets into Bluesky, and more.

Bluesky announces series A


Bluesky has announced their series A funding round, raising $15M, using the announcement to give a first look at some of their monetisation plans as well. The series A funding round is lead by Venture Capital firm Blockchain Capital. In summer 2023 Bluesky had an $8M seed round, and various investors of the seed round also returned for the series A. Kinjal Shah, a Partner at Blockchain Capital, will join the board of Bluesky.

The seed round already had investors from the crypto world, but this drew much more attention with the series A, as the headline of Blockchain Capital as a lead investor made the connection loud and clear. Bluesky is aware of the negative connotations that many people have regarding blockchains and crypto, explicitly stating that “the Bluesky app and the AT Protocol do not use blockchains or cryptocurrency, and we will not hyperfinancialize the social experience (through tokens, crypto trading, NFTs, etc.).”

Bluesky also announced two avenues they will start to explore for monetisation; a subscription model and payment processing. For the subscription model Bluesky will explore various additional features that do not touch on the core experience, such as higher quality video uploads, or profile customisations. Bluesky will also start working on payment services to support creators. Not much information is known yet on this, and Bluesky says they will share more information as it becomes available.

Kinjal Shah wrote the investment thesis for Blockchain Capital, which gives good insight in the vision of what Blockchain Capital hopes to get out of the investment. She writes: “With this investment, we’re investing in more than a product but rather a vision of what social infrastructure could be. A future where users own their identity and data, developers can innovate freely, and networks are as diverse as we are.” The reason for Blockchain Capital to invest into a social infrastructure is the new opportunities that an open developer ecosystem brings for (other) developers to build new products, which is also stated here by Bluesky developer Why.

On Enshittification


A common response to the news of Bluesky’s series A being lead by a VC firm called Blockchain Capital is that “the enshittification has started”. This response was dominant on the fediverse, and less so but still present on Bluesky. It’s been such a common response that I think it deserves a closer look at ‘enshittification’ and how it relates to Bluesky taking money from a blockchain VC firm. The meaning of the term enshittification has shifted over time, and both meanings provide an interesting lens to look at the news.

When Cory Doctorow coined the term enshittification in 2022, he used it to describe a process of platform decay. A platforms subsidises growth by operating at a loss, and places themselves in between the suppliers and customers on a two-sided marketplace. Once suppliers and customers are locked in on the platform and cannot easily leave, the enshittification cycle happens: the platform uses their control of the marketplace to take an ever increasing part of the value while while making the experience on the platform worse, for both suppliers and consumers.

What is interesting here is that in earlier interviews, Jay Graber has mentioned the idea of building marketplaces on Bluesky as a way to make money. If enshittification is used to describe platform decay, it stands out that a marketplace is not present in the Series A announcement as a way for Bluesky to monetise. For a platform to become enshittified in this meaning of platform decay, a platform needs to have exclusive control of a marketplace on the platform. However, Bluesky is currently not taking the direction of a marketplace for monetisation, instead opting for subscriptions and payment processing. This is still open to change at a later point, as Graber has expressed interest in it before.

Doctorow also mentions two principles to combat platform enshittification. Platforms should be interoperable, allowing users can switch to a different provider. Users should also have the ability to control the content they see, and not be dependent on an opaque algorithm owned by the platform. As both of these principles are deeply embedded in the design of ATProto, Bluesky is an interesting case study if the principles that Doctorow mentioned are indeed good enough to stave off enshittification.

The meaning of the term enshittification has drifted and expanded over time. Enshittification is now commonly used to refer to any business practice that makes the company or product, well, shit. There is a fairly widespread negative attitude towards both venture capital as well as blockchains and crypto. People perceive that these systems have not brought benefits they promised, and enriched a small elite instead, all the while degrading the experience of using the internet. This is not a newsletter to deconstruct blockchains or VC (I’m sure you can find your own sources for that), but I do want to point out that public perception of both venture capital and blockchains matter here. Bluesky is in an active growth phase, and part of the sales pitch to get people to join the network is that Bluesky is a ‘better’ place, for various interpretations of ‘better’.

Getting people to join Bluesky while also being associated with technologies and organisations that many people perceive as ‘not better’ is much harder. People want to join a new network because they hope that the new network is a better experience for them. Judging from the outside if a network is a suitable place is hard, so people tend to fall back to simple heuristics to determine if a network is a good place for them. BlockChain Capital might provide valuable support to Bluesky, but this hard to see as an outsider that is considering joining Bluesky. Instead, it is more likely that they will fall back on their preexisting opinions about startups that take VC money or affiliated with blockchains.

The News


Porto is a new free tool that allows you to import your Twitter archive into Bluesky. The tool asks you to download your tweets from X as an archive, and upload the folder with your archive into the tool, via a browser extension.

Bridgy Fed, the bridge between ActivityPub and ATproto has gotten some updates, with the main new feature is that you can now set custom domain handles on Bluesky for fediverse accounts that get bridged into Bluesky. This brings the interoperability between the networks closer to native accounts, and makes having a bridged account more attractive. As such, you can now follow my fediverse account on Bluesky at @fediversereport.com.

Last week I wrote that the “new wave has a higher retention rate than other waves”. Another week later and this effect still holds.

ProtoScript is a tool that lets you publish Javascript code directly to your PDS, and then view and execute code from any user directly in your browser. Conceptually it is similar to ATFile, which lets you store arbitrary files on your PDS, but this time with Javascript code instead. Both ProtoScript and ATFile are exploring the idea that the PDS is a website, and it seems like there is still a lot of design space left to explore here.

The ATProto Tech Talks is back, with a new event November 7th. This event will feature various ways people build blogs on ATProto, including by Bluesky developers Samuel and Hailey. Smoke Signal event to register is available here.

Tracking how the space of labelers for self-identification is evolving:

  • The Games Industry Labeler now is now automated via DMs, where a chat interface walks a user through setting their labels.
  • The permissionless nature of ATProto allows people to backdate posts. This feature allows people to import their Twitter archive to the original date of posting, but can also create confusion. The Backdated Labeler labels posts that have a different timestamp than the time they first become visible on the network.


The Links


And some more links that cater towards developers:

That’s all for this week, thanks for reading! You can subscribe to my newsletter to receive the weekly updates directly in your inbox below, and follow this blog @fediversereport.com and my personal account @laurenshof.online.

#bluesky

fediversereport.com/last-week-…




Si è conclusa la XIII edizione di #ExpoTraining! Due giornate dedicate all'orientamento, alla formazione e alla sicurezza sul lavoro.

Qui il video racconto integrale dell'evento ▶️ https://youtu.



What is AI? Exploring artificial intelligence at Emiliyan Stanev School

L'articolo proviene da #Euractiv Italia ed è stato ricondiviso sulla comunità Lemmy @Intelligenza Artificiale
On October 16th, Emiliyan Stanev School organized an event in relation to EU Code Week about the principles of artificial intelligence (AI), its capabilities

Intelligenza Artificiale reshared this.




L'APPUNTAMENTO BIENNALE DELLA "CONVENZIONE ONU DI PALERMO" PER LA LOTTA ALLA CRIMINALITà TRANSNAZIONALE


Immagine/foto

Si è conclusa recentemente a Vienna la Conferenza delle Parti alla Convenzione della Nazioni Unite contro la Criminalità Organizzata Transazionale (#UNTOC) – nota come "Convenzione di Palermo" – l’appuntamento biennale più importante dell’agenda dell’Onu in tema di prevenzione e lotta alla criminalità organizzata tramite il rafforzamento della cooperazione transfrontaliera.

L’Italia, che da sempre riveste un ruolo di rilievo nell’azione internazionale di contrasto alle mafie, ha partecipato ai lavori con una delegazione interministeriale guidata dal Ministro della Giustizia, Carlo Nordio, che intervenendo in "plenaria" ha sottolineato l’urgenza di rafforzare, a livello nazionale e attraverso la collaborazione multilaterale, il contrasto alle nuove forme di criminalità organizzata, che sempre più spesso opera nel dominio cyber.

Insieme alla Direttrice Esecutiva dell’Ufficio Onu sulle Droghe e il Crimine, Ghada Waly, il Ministro ha inoltre preso parte ad un evento di alto livello che segna l’avvio di un mese di mobilitazione in vista della prima Giornata internazionale contro la Criminalità Organizzata Transnazionale (15 novembre), inaugurando in tale occasione anche la mostra ”Cooperation in the fight against transnational organized crime: Italy’s Experience’‘ che offre una testimonianza della storia e delle capacità italiane nella lotta alle mafie. La mostra rimarrà al Vienna International Center per essere poi esposta anche al Palazzo di Vetro di New York. La mostra che illustra l’esperienza del nostro Paese nella lotta alla criminalità organizzata transnazionale, è stata realizzata dai Ministeri degli Affari Esteri e della Cooperazione Internazionale, dell’Interno e della Giustizia.

Attraverso un percorso di immagini evocative (vedi foto in apertura), la mostra illustra alcune fasi cruciali della lotta contro la mafia, il ruolo dei magistrati Flacone e Borsellino, la reazione alle stragi del 1992, la strada che ha portato all’adozione della Convenzione di Palermo, le attività di cooperazione internazionale e le sfide future.


La settimana è stata animata anche da numerosi eventi a latere. La Rappresentante Permanente italiana, Amb. Debora Lepre, è intervenuta in un panel di alto livello sul meccanismo di verifica dell’attuazione della Convenzione di Palermo e in un side event sullo sfruttamento dei minori da parte delle organizzazioni criminali. L’Italia ha co-organizzato anche eventi incentrati su temi prioritari per il nostro Paese, quali il contrasto ai reati contro il patrimonio culturale, la prevenzione del terrorismo, le connessioni tra corruzione e criminalità organizzata, il traffico di armi da fuoco.
La Conferenza ha adottato 4 risoluzioni e 2 decisioni: tra queste due importanti risoluzioni sul contrasto al traffico di armi da fuoco e sulla prevenzione e la lotta ai crimini ambientali.



🏆 #Scuola, oggi è stato conferito il Premio “Alfieri del Lavoro” dal Presidente della Repubblica Sergio Mattarella, presso il Quirinale, a 25 studenti e studentesse da tutta Italia.



Lucia Aleotti del Gruppo Menarini nominata Cavaliere del Lavoro: “Emozionata e orgogliosa”


@Politica interna, europea e internazionale
Lucia Aleotti del Gruppo Menarini nominata Cavaliere del Lavoro Lucia Aleotti, azionista e membro del Board del Gruppo Menarini, è stata nominata Cavaliere del Lavoro dal Presidente della Repubblica Sergio Mattarella, su proposta del Ministro delle Imprese e



DALLA SVEZIA: L' INVESTIMENTO EOLICO PORTA ALLA BANCAROTTA. CONVIENE A CINA E USA. SOLO DANNI PER L'UE - Ifanews - News Magazine
ifanews.it/dalla-svezia-l-inve…
in reply to Mro

@mro
Ma non è vero


FROM. The UK
wattsupwiththat.com/2024/03/17…

Three things stand out here.

One is that Sweden does not appear to have our system of constraint payments:

Second is the fact that low winds mean high market prices, and vice versa. Obviously wind farms make their money when the wind blows, so low prices at those times drastically impact earnings.

In the UK, the CfD subsidy protects wind farms from these fluctuations, whilst ROC subsidies are generous enough to offset low market prices.

And thirdly, the article rightly notes that wind farms don’t have to pay for grid adaption and other wider system costs.



Le immagini di Valencia ci confermano che questo è un Pianeta sovrappopolato, inquinato e preda di cambiamenti climatici che solo i mentecatti, gli opportunisti e i disonesti si ostinano a negare.

E in Usa stanno per rieleggere il comandante in capo dei mentecatti, degli opportunisti e dei disonesti.

Un delinquente ricco, golpista e razzista, il rappresentante della peggio umanità possibile, il disonesto in capo, un negazionista fanatico e violento.
Il solo fatto che un simile individuo sia in lizza, è una sconfitta per il genere umano.
Finirà malissimo, per tutti, anche per i 4 dementi che tifano che sarà meglio così, anche, e soprattutto, per i poveri che si illudono di trovare la soluzione magica votando un criminale simile o, in generale, votando la peggior destra reazionaria.
Andrà male alla democrazia che sarà fatta a pezzi in America, subito seguito dai suoi emuli in Europa e Italia che non attendono altro, e ci consegnerà al criminale di Mosca, suo degno compare.
Il baratro mondiale è ad un passo.
Andrà bene solo per i ricchissimi, che infatti stanno con lui.
Preparatevi al peggio.



The latest expansion of an Elon Musk-funded super PAC; how New York's largest hospital system is using AI; and how Epic Games' control over the 3D model market could "destroy" cultural heritage.

The latest expansion of an Elon Musk-funded super PAC; how New Yorkx27;s largest hospital system is using AI; and how Epic Gamesx27; control over the 3D model market could "destroy" cultural heritage.#Podcast



Fired Employee Allegedly Hacked Disney World's Menu System to Alter Peanut Allergy Information#Disney


se ti incazzi con una persona e dici peste e corna, ma poi neghi che sia autistica, neghi che abbia problemi, neghi qualsiasi motivazione o spiegazione, alla fine che coerenza stai dimostrando? anche senza essere psicologhi si capisce che è solo un accanimento senza senso. e pure inutile, se non dannoso. o fai finta di niente e va tutto bene, o se il problema esiste il problema esiste. ma difficilmente funzionerà come piace a te... statisticamente parlando.


New York Times: “l’esercito Usa prepara la guerra con la Cina”


@Notizie dall'Italia e dal mondo
Secondo il quotidiano americano, il Pentagono sta cercando di trasformare l'esercito Usa in una forza adatta ad uno scontro sul terreno con le truppe cinesi
L'articolo New York Times: “l’esercito Usa prepara la guerra con la Cina” proviene da Pagine Esteri.




le parole dette feriscono molto più delle parole scritte. per questo l'idea secondo cui per non ferire le persone è meglio parlare che scrivere è sbagliata. ed è sbagliato pure che parlando si creano meno fraintendimenti, perché questo in realtà dipende dalle persone e dalla loro capacità di reagire immediatamente e con prontezza, e non è per niente scontato.


Oggi, 30 ottobre, nel 1921


Sensitive content

Storia reshared this.



Rai storia Cari Amici Vicini e Lontani


Sensitive content

Storia reshared this.





Dentro l’assedio del nord di Gaza, dove “la morte aspetta dietro ogni angolo”


@Notizie dall'Italia e dal mondo
Membra sparse per le strade, rifugi dati alle fiamme, centinaia di persone intrappolate negli ospedali: I palestinesi raccontano le scene apocalittiche dell'ultima campagna di Israele
L'articolo Dentro l’assedio del nord di Gaza, dove “la morte aspetta



@RaccoonForFriendica new version 0.1.0-beta15 available for testing! 🎉

Changelog:
🦝 add link to manual and Matrix room in "App information" dialog;
🦝 add possibility to make following/followed list private in profile settings;
🦝 fix making post indexable in profile settings;
🦝 fix pagination for followed users, followed hashtags and hashtag feed;
🦝 fix profile settings loading after account switch;
🦝 optimization of startup and account switch flows;
🦝 add experimental support for embedded images in posts;
🦝 as usual, dependency updates and more unit tests.

Reach out to me for bug reports and remember to #livefasteattrash!

#friendica #friendicadev #androidapp #androiddev #fediverseapp #kotlin #multiplatform #kmp #compose #opensource #foss #procyonproject

RaccoonForFriendica reshared this.

Unknown parent

@Thomas nice idea! I'll add an issue for it, there was an option for it in the Lemmy app ("Auto load images"), but I thought nobody used it.

RaccoonForFriendica reshared this.




Prosegue l’#Expotraining con tanti seminari e workshop nello stand del #MIM!

Qui il programma dell’ultima giornata ▶️ mim.gov.



Quando si fanno le verifiche, si scoprono le bugie. La "pinocchia" di palazzo Chigi è stata verificata come bugiarda e inattendibile.
Oltre una dichiarazione verificata su due di Meloni continua a non essere attendibile | Pagella Politica
pagellapolitica.it/articoli/fa…