Salta al contenuto principale



Videonics: The Dawn of Home Video Editing, Revisited


The 1987 Videonics Editing System

Here’s a slice of history that will make any retro-tech fan grin: before TikTok and iMovie, there was a beast called the Videonics DirectED Plus. This early attempt at democratizing video editing saved enthusiasts from six-figure pro setups—but only barely. Popular Science recently brought this retro marvel back to life in a video made using the very system that inspired it. Picture it: 1987, VHS at its peak, where editing your kid’s jazz recital video required not just love but the patience of a saint, eight VCRs, three Videonics units, two camcorders, and enough remotes to operate a space shuttle.

The Videonics DirectED Plus held promise with a twist. It offered a way to bypass monstrous editing rigs, yet mastering its panel of buttons felt like deciphering hieroglyphs. The ‘Getting Started’ tape was the analog era’s lifeline, often missing and leaving owners hunting through second-hand stores, forgotten basements, and enthusiast forums. Fast forward to today, and recreating this rig isn’t just retro fever—it’s a scavenger hunt.

The 1987 Videonics Editing SystemOnce assembled, the system resembled a spaghetti junction of cables and clunky commands. One wrong button press could erase precious minutes of hard-won footage. Still, the determination of DIY pioneers drove the machine’s success, setting the stage for the plug-and-play ease we now take for granted.

These adventures into retro tech remind us of the grit behind today’s seamless content creation. Curious for more? Watch the full journey by Popular Science here.

youtube.com/embed/4MVEqA6jz1s?…


hackaday.com/2024/11/11/videon…



Il Giappone presenta un sistema laser semovente per rivoluzionare la difesa aerea

@Notizie dall'Italia e dal mondo

Se una volta le armi laser erano qualcosa da relegare alla fantascienza, oggi il loro avvento è pressoché certo. La proliferazione di sistemi d’attacco aerei come droni e munizioni circuitanti ha spinto le principali Forze armate mondiali a interrogarsi su come adeguare la



Perché serve una riserva specializzata per le nuove tecnologie militari

@Notizie dall'Italia e dal mondo

Nella sua audizione sul Documento Programmatico Pluriennale 2024-2026 della Difesa, il ministro Guido Crosetto ha parlato della necessità di costituire una “riserva specializzata”, che sia in grado di garantire alle Forze Armate uno sviluppo capacitivo ed operativo nel campo delle nuove



Cybersecurity, come applicare un framework zero trust anche nei sistemi pubblici?


@Informatica (Italy e non Italy 😁)
Il modello di sicurezza Zero Trust rappresenta una nuova visione della protezione informatica, sempre più diffusa nelle aziende e negli enti pubblici. Si basa su un concetto radicalmente diverso dalla classica sicurezza perimetrale: invece di separare



Altro che Trump, sono anni che il Washington Post si è piagato alla logica commerciale dei social

@Politica interna, europea e internazionale

Più che le sorti della democrazia americana, l’attuale crisi del Washington Post può, forse, essere utile per meglio inquadrare la parabola dell’editoria tradizionale. Di quella americana come di quella europea, e



Keebin’ with Kristina: the One With All the Espionage


Illustrated Kristina with an IBM Model M keyboard floating between her hands.

[Ziddy Makes] describes this cute little guy as a biblically-accurate keyboard. For the unfamiliar, that’s a reference to biblically-accurate angels, which have wings (and sometimes eyes) all over the place. They’re usually pretty scary to behold. Don’t say I didn’t warn you.

A cube keyboard with adorably vibrant pastel keycaps.Image by [Ziddy Makes] via GitHubBut this? This is the opposite of scary. Sure, there are keys everywhere. But it’s just so darn adorable. You know what? It’s those keycaps.

This 16-key macro cube uses a Pro Micro and a system of PH2 5p ribbon cables to connect the four four-key sisterboards to the main board. A 3D-printed base holds all the boards in place. Out of all the switches in the world, [Ziddy] chose Otemu Blues. Clack!

Although it may take some getting used to, this seems like it would be a fun way to input macros. I can see the case for putting some rubber feet on the bottom, otherwise it might scoot around on the desk. That might be cute, but only the first couple of times, you know?

Lexicon Has A Handy Words Layer


[Ewen] wrote in to tell me about Lexicon, a keyboard he designed while reading Marcin Wichary’s most excellent Shift Happens. One idea spawned by the book was a keyboard aimed at writing prose faster and more easily. The result is an input device that marries a stenography-light concept with the BASIC shortcut-having ZX Spectrum.

The key is in those three Space bars. They each produce Space when pressed briefly, but when long-pressed bring up a different layer — Symbols, Function, and Words. “Symbols” refers to the various awesome Unicode symbols that come out of that layer, including neat typographical marks. “Function” comprises the Function keys plus extras.

The Lexicon keyboard, a sort of steno-light affair that types whole words via a Words layer.Image by [Ewen] via GitHubThanks to the special Words layer, the user can quickly input common words such as ‘and’, ‘said’, and ‘she’. So how in the world would the user remember how to do all of that? Well, it’s actually pretty easy. There is one word per key, and they are married up alphabetically. So ‘a’ is for ‘and’, ‘s’ is for ‘said’ and ‘x’ is for ‘she’. Each number key gets you that word spelled out — 1 delivers ‘one’ and 2 gives you ‘two’, and so on.

But [Ewen] didn’t stop there. There’s a whole subset of words that are accessible by combining the Words key with two alpha keys, such as ‘SM’ for ‘some’. Users can easily combine shortcuts to produce longer words, like ‘SM1’ for ‘someone’.

Under the hood of this 65% keyboard, you’ll find an RP2040 running the QMK firmware. Although the Lexicon is not open-source, there’s nothing stopping you from taking this idea and running with it in another language. If you want to get a hold of one, check out [Ewen]’s Etsy for kits and completed boards.

The Centerfold: Keep On Truckin’


24563809Image by [FarmersOnlyJim] via redditMan, this setup is fire! Don’t recognize the color scheme? It’s those hues from the Toyota Racing Development (TRD) days of the 1980s. The keyboard is a Keychron K8 Pro, and [FarmersOnlyJim] custom-dyed those MOA-profile keycaps. The neat part is that [Jim] offers their dye process right there in the comments. Come for the color scheme, and stay for the bunny tax in the gallery.

Do you rock a sweet set of peripherals on a screamin’ desk pad? Send me a picture along with your handle and all the gory details, and you could be featured here!

Historical Clackers: Espionage Via IBM Selectric II


So your girl caught this video by [Retro Tech or Die] and then picked up a Selectric II a few days later for about $5 with the coupon savings. It’s all gummed up inside, and I’ll have to address that on my own as my local shop no longer deals with Selectrics.
A lovely blue Selectric II.Image via YouTube
Anyway, back to the video. We’ve covered this topic before, but it’s been a long time, and this is a nice refresher. The Selectric was a revolutionary typing machine, and the correcting Selectric II a little bit more so. Because of this, government and other offices purchased them in large quantities.

At the height of US-Russian tensions, the Soviets saw an opportunity for espionage in these electromechanical marvels and planted bugs in the Selectric IIs inside the United States embassy in Moscow. It’s surprisingly easy to get inside a Selectric II, and it only took the spies about 30 minutes to open and bug each machine.

Selectric IIs were in use at the embassy from 1982 until 1984 when the bugs were discovered. For more than a year, the Soviets were able to read documents of all sensitivity levels even before officials had laid eyes on them. A tiny sensing device picked up the keystrokes and transmitted them to antennas hidden in the walls. These signals were relayed to a nearby listening station and decoded using probability tables.
The underside of a Selectric II's guts, plus a decoded bit of transmission.Image via YouTube
These bugs were so small that they could only be detected by x-rays. Housed inside a metal bar of the typewriter, they used magnet meters to detect the disturbances as letters were typed. The transmitted signals were disguised inside television broadcast frequencies.

Because of the way the Selectric II is designed internally, the Soviets were only able to get the alphanumeric characters. They could not capture Shift, Space, Backspace, or Tab. Furthermore, they were compressing six bits of information down to four, which made probability tables pretty much the only option.

It’s a fascinating story for sure. And I’ll let you know how it works out with my Selectric II.

ICYMI: This Lovely Wooden Keyboard

A person examines an exquisite wooden keyboard.Image via YouTube
It’s not often that we describe things as stunning, especially keyboards, which tend to be plastic-based rectangular life forms. But then there’s this wooden keyboard from Hacoa via [ProcessX].

Watch as the beautiful wood is routed out, and stay for the delicate and tedious process that produces each finished keycap.

I must admit that I was a little disappointed (or maybe caught off-guard) to see the lovely wooden keycaps being overlaid on plastic ones, but as one commenter pointed out, the stresses of wood grain running through an MX-style keycap stem would be pretty high.

Speaking of the keycaps, they are finished off with laser-engraved legends which will surely never wear out, but are bound to get, let’s say, seasoned over time. As much as I’d like to know how it feels to type on a wooden keyboard, this kind of project seems incredibly far out of reach. But we’ve certainly seen wooden keyboards before. Yes we have. Even macro pads.


Got a hot tip that has like, anything to do with keyboards? Help me out by sending in a link or two. Don’t want all the Hackaday scribes to see it? Feel free to email me directly.


hackaday.com/2024/11/11/keebin…



Rilasciato Hashr 2.0.1: Il Tool Gratuito del CERT-AGID per Proteggere i Sistemi della PA


Il CERT-AGID ha recentemente rilasciato una nuova versione del tool hashr (v.2.0.1) come software libero e a codice aperto sotto licenza EUPL. Questo strumento, scaricabile gratuitamente dall’apposita pagina, è progettato per la ricerca di file malevoli all’interno di un filesystem confrontando i valori hash dei file riscontrati con una lista di impronte hash già note.

Hashr può essere utilizzato con proprie liste di ricerca oppure, per le Pubbliche Amministrazione accreditate al feed IoC del CERT-AGID, con gli hash derivati dalle campagne malevole registrate che hanno un impatto sul territorio italiano.
24563777
Tutte le Pubbliche Amministrazioni possono accreditarsi al feed IoC del CERT-AGID per avere accesso a un flusso in tempo reale di Indicatori di Compromissione (IoC), che elenca e condivide dati su campagne malware e phishing rilevate nelle attività quotidiane di monitoraggio e prevenzione, come ad esempio gli indirizzi IP utilizzati per attività fraudolente, URL di siti malevoli, hash di file dannosi e altre informazioni. Tale servizio, offerto gratuitamente, è rivolto esclusivamente alle Pubbliche Amministrazioni.
24563779
In sinergia con il Feed IoC, hashr consente di ricercare file con hash correlati a campagne malevole note o APT analizzati dal CERT-AGID, permettendo di identificare rapidamente i file compromessi. L’uso di hashr risulta particolarmente utile per indagini di sicurezza informatica, analisi forense e verifica dell’integrità dei file su filesystem di grandi dimensioni.

L’utilizzo combinato di hashr e del feed IoC aumenta significativamente la capacità di prevenire ed individuare minacce informatiche, incrementando la sicurezza complessiva delle infrastrutture digitali.

Questi due strumenti forniti da AGID costituiscono un’opportunità per le amministrazioni per migliorare la sicurezza dei propri sistemi IT, per adeguarsi, al contempo, alle indicazioni del Piano Triennale per l’Informatica 2024-2026 e per rafforzare la resilienza digitale complessiva della Pubblica Amministrazione.

Link utili:


L'articolo Rilasciato Hashr 2.0.1: Il Tool Gratuito del CERT-AGID per Proteggere i Sistemi della PA proviene da il blog della sicurezza informatica.



📚 Nel centenario della nascita del maestro Alberto Manzi, la Biblioteca del #MIM espone una selezione di note e decreti ministeriali che documentano la collaborazione tra il Ministero e la RAI, che portò la didattica sul piccolo schermo.
#MIM



Il 55% non dorme, il 39% si aspetta un infarto: questo è il prezzo della sicurezza informatica


Secondo un nuovo rapporto dell’Institute for Information Security (CIISec) 2023-24, i professionisti della sicurezza informatica nel Regno Unito guadagnano stipendi significativamente più alti rispetto alla media nazionale ma devono affrontare seri problemi di burnout.

Sulla base di un sondaggio condotto su 311 professionisti, lo stipendio medio nel settore della sicurezza informatica ha raggiunto 87.204 sterline, più del doppio dello stipendio medio del Regno Unito di 34.900 sterline (44.000 dollari). Dalla pubblicazione del primo rapporto CIISec nel 2016-2017, gli stipendi sono aumentati del 29%, da £ 62.144 ($ 78.400) ai livelli attuali. Tenendo conto dell’inflazione, la crescita reale è stata del 7%.

Dinamiche positive si registrano in tutti i segmenti industriali, con circa il 18% dei professionisti che ora guadagna più di £ 150.000 ($ 189.000) all’anno, rispetto ad appena il 7% nel 2016.

Tuttavia, gli alti salari sono accompagnati da gravi rischi professionali. Secondo il sondaggio, il 55% degli intervistati soffre di insonnia a causa dello stress lavorativo e il 39% teme un infarto. Uno specialista su cinque (21%) è considerato oberato di lavoro.

La situazione è aggravata dalla mancanza di personale qualificato. La maggior parte degli intervistati (72%) ha indicato il personale come la principale sfida operativa, mentre i processi e la tecnologia rappresentano una preoccupazione rispettivamente solo per il 17% e l’11%.

La mancanza di diversità nel settore aggrava la carenza di talenti: solo il 19% degli specialisti entra nella professione senza un’istruzione superiore e la percentuale di donne è solo del 10%. In particolare, solo il 41% dei dipendenti prevede di rimanere nella posizione attuale nei prossimi due anni.

Amanda Finch, CEO di CIISec, sottolinea che molte delle sfide del settore, incluso il panorama delle minacce in continua evoluzione, vanno oltre il controllo delle aziende. Tuttavia, le questioni legate al reclutamento e al mantenimento del personale possono essere risolte a livello del datore di lavoro.

Il rapporto presta particolare attenzione all’intelligenza artificiale (AI). Le opinioni sono divise: l’89% ritiene che la tecnologia avvantaggerà gli aggressori e il 71% vede un impatto positivo sui difensori della rete. Quando si pianifica l’uso dell’intelligenza artificiale nel lavoro (85% degli intervistati), è stata identificata una tendenza allarmante: il 44% delle organizzazioni non è consapevole dei rischi associati e non dispone di politiche per l’uso sicuro della tecnologia.

Secondo gli esperti, il settore della sicurezza informatica ha urgentemente bisogno di aumentare la conoscenza delle minacce associate all’intelligenza artificiale, in particolare all’intelligenza artificiale generativa, mentre la tecnologia è nelle sue prime fasi di sviluppo. Particolare attenzione dovrebbe essere prestata alla formazione dei professionisti emergenti che dovranno resistere agli attacchi dell’intelligenza artificiale per i decenni a venire.

L'articolo Il 55% non dorme, il 39% si aspetta un infarto: questo è il prezzo della sicurezza informatica proviene da il blog della sicurezza informatica.



La Commissione affida strategicamente la stesura del Codice di condotta per GPAI a 13 esperti non retribuiti

L'articolo proviene da #Euractiv Italia ed è stato ricondiviso sulla comunità Lemmy @Intelligenza Artificiale
La Commissione europea ha affidato la stesura del Codice di condotta per l’intelligenza artificiale per

Intelligenza Artificiale reshared this.



La Russa: “Dopo la vittoria di Trump voglio vedere Taylor Swift cantare in prima linea con Hamas” | VIDEO


@Politica interna, europea e internazionale
La Russa commenta la vittoria di Donald Trump e attacca Taylor Swift Ignazio La Russa ha commentato la vittoria di Donald Trump alle elezioni presidenziali Usa esprimendo forti critiche nei confronti dello star system americano e in particolar modo



PODCAST. Israele rafforza l’occupazione di Gaza, ma in Libano Hezbollah è una spina nel fianco


@Notizie dall'Italia e dal mondo
L'esercito israeliano allarga e costruisce postazioni sui corridoi Netzarim e Filadelfia segnalando di voler restare nella Striscia, soggetta sempre a pesanti raid aerei che provocano decine di morti e feriti. In Libano



#NotiziePerLaScuola
È disponibile il nuovo numero della newsletter del Ministero dell’Istruzione e del Merito.


Il mio canto libero, l’eredità di Luigi Einaudi

@Politica interna, europea e internazionale

La Città metropolitana di Palermo in collaborazione con Popsophia e Fondazione Luigi Einaudi presenta lo spettacolo di filosofia e musica “Il mio canto libero, l’eredità di Luigi Einaudi”. 19 novembre 2024, ore 10:00 Teatro Politeama Garibaldi – Via Filippo Turati 2, Palermo Media partner: Giornale di Sicilia



#NoiSiamoLeScuole questa settimana è dedicato a due scuole di Portici, in provincia di Napoli: l’IIS “Francesco Saverio Nitti” che, con i fondi del #PNRR “Scuola 4.


AMERICA LATINA. Da un summit all’altro sotto l’ombra di Trump


@Notizie dall'Italia e dal mondo
Dalle elezioni USA uscirà rafforzata quell’internazionale di estrema destra che Trump ha fatto nascere in Spagna nel 2020, che ha messo nel mirino il socialismo in tutte le sue forme e le organizzazioni di sinistra dell'intera America Latina
L'articolo AMERICA LATINA. Da un summit



Ricette elettroniche dematerializzate: si fa presto a dire "promemoria".


@Privacy Pride
Il post completo di Christian Bernieri è sul suo blog: garantepiracy.it/blog/ricette-…
Mi sa che il giornalismo sgombro ha colpito ancora. Ma quale whatsapp? Per favore, siamo seri e non diciamo vaccate!

reshared this



Stasera 10 nov., alle 21.10 su #Raistoria il film “Official Secrets - Segreto di Stato” di Gavin Hood con Keira Knightley, Matt Smith, Matthew Goode, Ralph Fiennes.


La storia vera di Katharine Gun, che nel 2003 lavorando come traduttrice per il Government Communications Headquarters (GCHQ), ha fatto trapelare informazioni top secret a The Observer.
I documenti hanno rivelato una richiesta degli Stati Uniti di informazioni compromettenti su diplomatici di stati membri del Consiglio di sicurezza delle Nazioni Unite, prima di un voto su una seconda risoluzione per l'invasione dell'Iraq del 2003.
Il coraggioso atto di Gun contribuì ad un dibattito sull'invasione e la sua legittimità. 💡
#whistleblowers
#storiaintv
@Storia

Storia reshared this.



Il Ch-7 è realtà. Pechino svela il suo drone stealth d’avanguardia

@Notizie dall'Italia e dal mondo

[quote]Nuove immagini e video rilasciati dai media cinesi sembrano mostrare per la prima volta al pubblico quello che si presume essere un Ch-7, il nuovo drone stealth cinese a forma di ala volante. Questo drone, sviluppato dalla China Aerospace Science and Technology Corporation, si




Luke


Luke is a homeless #cat in Iran. He was found dragging himself along the street, crying for help. Many people contributed to his treatment and surgery to help him get back on his feet. He’s a fighter, and he powered through. 😻
Although he’s made significant progress in his recovery, he still needs a home, as he’s too vulnerable to live on the streets. Luke has come a long way because he loves life. If you want to witness and share in that passion for life, bring him into your home.
For information: Shima +39 389 603 7889

Luke è un #gatto randagio in Iran. È stato trovato mentre si trascinava per strada, piangendo per chiedere aiuto. Tante persone hanno contribuito alle sue cure e all’intervento per aiutarlo a rimettersi in piedi. È un combattente e ha lottato con tutte le sue forze. 😻
Anche se ha fatto grandi progressi nella sua guarigione, ha ancora bisogno di una casa, poiché è troppo vulnerabile per vivere in strada. Luke ha fatto tanta strada perché ama la vita. Se vuoi condividere e ammirare questa passione per la vita, accoglilo nella tua casa.
Per informazioni: Shima +39 389 603 7889

in reply to 𝓘𝓰𝓸𝓻 🏴‍☠️ 🏳️‍🌈 🇮🇹

A black and white cat is sleeping on a white sheet. The cat's leg is bandaged, and there's a blue plastic sheet under the cat.
in reply to 𝓘𝓰𝓸𝓻 🏴‍☠️ 🏳️‍🌈 🇮🇹

A black and white cat is laying on a white mat. The cat has a bandage on its front leg and is looking towards the camera. A carrier is in the background.


#Scuola, il Ministro Giuseppe Valditara, nella giornata di giovedì 7 novembre, ha visitato alcuni istituti dell'ambito territoriale di Piacenza.


Trasloco


@Privacy Pride
Il post completo di Christian Bernieri è sul suo blog: garantepiracy.it/blog/trasloco…
Il sito Garantepiracy.it ha traslocato. Alcuni avranno notato che tra sabato e domenica, per alcune ore, il sito è rimasto irraggiungibile. I più attenti mi hanno anche scritto e voglio ringraziare di cuore ognuno per averlo fatto: con amici così, i servizi di monitoraggio dei…

Privacy Pride reshared this.



A febbraio 2023 ho acquistato una stampante usata per sostituire la mia vecchia stampante, guastatasi dopo 13 anni, stesso modello. Molto soddisfatto ma c'è un problema. La "nuova" stampante si rifiuta di lavorare con cartucce non originali, a meno che non si imposti il cosiddetto "override". Per impostare l'override permanente c'è bisogno del driver originale, che è installabile solo sulle vecchissime versioni di Windows! È anche possibile impostare un override temporaneo, tenendo premuti per due tasti per alcuni secondi durante l'accensione della macchina, ma cessa di funzionare al suo spegnimento. Finora ero andato avanti così.
Oggi finalmente mi sono armato di pazienza e ho installato in una macchina virtuale (con 512 MB di RAM) Windows XP e i driver originali. Un tuffo nel passato, che mi ha consentito di impostare l'override permanente!

Lascio a voi le considerazioni sull'importanza di garantire un supporto prolungato nel tempo. Oggi sempre più l'uso dei dispositivi è vincolato all'installazione di app sui telefoni, che si agganciano a servizi cloud proprietari del produttore... la cosa mi fa paurissima.

in reply to Luca Allulli

diciamo che, essendo meccanica, quei 12 w sono destinati a crescere. Dipende molto dal modello. Per il resto progettino molto interessante il tuo. 🙂
in reply to PiadaMakkine

@PiadaMakkine nono sono 12 W tutti elettronici, assorbiti quando la stampante è accesa, in attesa di un lavoro. Ed è un valore massimo. La presa smart include un misuratore di potenza assorbita, così potrò misurare il consumo effettivo!


DELEGAZIONE ALBANESE IN ITALIA: LA PROCURA CONTRO IL CRIMINE ORGANIZZATO STUDIA LE INVESTIGAZIONI FINANZIARIE


Alcuni Procuratori della Procura Speciale contro la corruzione ed il Crimine Organizzato (SPAK) e alti Ufficiali della Polizia albanese (ASP) hanno effettuato una visita di studio in Italia.

Immagine/foto

La SPAK è un'entità giudiziaria indipendente, incaricata di indagare sulla corruzione e sulla criminalità organizzata ai più alti livelli del governo e della società in Albania. È composto dall'Ufficio investigativo nazionale, dalla Procura speciale e dai tribunali speciali.

La delegazione albanese ha condotto, nel nostro Paese, una visita studio sugli aspetti operativi delle investigazioni finanziarie.

Immagine/foto

L’attività è stata curata dalla Direzione Investigativa Antimafia (DIA) e organizzata dalla presenza OSCE in Albania nonché dall’Ufficio del Coordinatore per le attività economiche ed ambientali ed il Dipartimento per le minacce transnazionali del Segretariato OSCE, con il supporto dell’Esperto per la Sicurezza e dell’Esperto della Guardia di Finanza presso l’Ambasciata d’Italia a Tirana e del Servizio per la Cooperazione Internazionale di Polizia.


Il principale obiettivo del training è stato quello di sostenere l’Autorità Giudiziaria e la Polizia albanese nelle attività di contrasto al riciclaggio dei capitali illecitamente acquisti, nel settore delle misure di prevenzione patrimoniali in un’ottica di potenziamento e del rafforzamento della lotta al crimine organizzato transnazionale.

Immagine/foto

La delegazione è stata ricevuta dal Direttore della DIA, Generale di Corpo d’Armata della Guardia di Finanza Michele Carbone (immagine sopra) che nel corso del suo intervento ha sottolineato l’importanza di tali attività perché consentono la conoscenza interpersonale e il rafforzamento della fiducia reciproca, presupposto indispensabile per valorizzare la cooperazione in un settore tanto delicato, come quello del contrasto al crimine organizzato ed all’individuazione dei patrimoni illecitamente accumulati.

Nel corso delle attività è stata riaffermata l’efficacia dell’azione di contrasto alla criminalità organizzata nell’ambito della cooperazione tra i due Paesi, entrambi membri OSCE.

La visita rientra nelle attività svolte dalla presenza OSCE in Albania nel programma di supporto al sistema di law enforcement albanese e del progetto regionale OSCE per rafforzare le capacità di contrasto ai crimini finanziari.

#SPAK #ASP #OSCE #ALBANIA #DIA #GUARDIADIFINANZA #GDF



Oggi, 10 novembre, nel 1871


David_Livingstone_by_Thomas_Annan

L'esploratore Henry Stanley saluta David Livingstone, di cui si era posto alla ricerche alla sorgente del fiume Nilo, con la famosa frase “Dr. Livingstone, immagino?"

@Storia
#otd

Storia reshared this.





#9novembre 1989: il crollo del Muro di Berlino segna l'inizio della fine dei regimi comunisti nell'Europa dell'Est, liberando popoli oppressi e aprendo la strada alla riunificazione europea.



Modì, inseguire un'ombra. Un film ed un podcast per l'artista livornese.


Immagine/foto

Jacopo Veneziani racconta Modì in un viaggio che porterà da Livorno a Parigi, passando per Napoli, Firenze e Venezia. Incontreremo artisti bohémien, collezionisti d’arte e, soprattutto, la sua musa.

Modì è un podcast omaggio al film Modì che racconta gli ultimi giorni di Amedeo Modigliani diretto da Johnny Depp. Nel cast Riccardo Scamarcio nel ruolo di Modigliani Luisa Ranieri, Antonia Desplat e Al Pacino.

choramedia.com/podcast/modi-in…

#modì #modigliani #Podcast #unopodcast #unofilm #JacopoVeneziani #choramedia #Storia

@Storia

Questa voce è stata modificata (10 mesi fa)

Storia reshared this.



On Thursday 404 Media that police were freaking out about mysteriously rebooting iPhones. Now multiple experts have found that Apple introduced code that reboots locked phones after a period of time.#News
#News


@RaccoonForFriendica new version 0.1.0.-beta20 available for testing!

Changelog:
🦝 show images in horizontal pager in timelines
🦝 improved "Add new account" flow
🦝 fix reblogged posts not displayed in hashtag feed
🦝 fix for crashes (calendar, post detail, hashtags)
🦝 added more unit tests
🦝 dependency updates

Moreover, the user manual has been improved and translated into Italian.

Have a nice weekend and #livefasteattrash!

#friendica #friendicadev #androidapp #androiddev #fediverseapp #kotlin #kmp #compose #multiplatform #opensource #procyonproject #raccoonforfriendica

in reply to Thomas

@Thomas thanks for the report!

Concerning the first point, there is an "autoload images" option in the Settings screen which globally enables loading of images (including user avatars and custom emojis) and videos in all screens.

As for the second point, does it happens everywhere or just in the Search screen?

RaccoonForFriendica reshared this.

in reply to 𝔻𝕚𝕖𝕘𝕠 🦝🧑🏻‍💻🍕

@Dieguito 🦝🧑🏻‍💻🍕
However, I have to press the switch manually to show or hide media. I would like this to work automatically so that the media is loaded when I'm in Wi-Fi and not in mobile data.

The problem occurs when I click on a link that opens in the browser and then switch back to the app. This has nothing to do with the search. By search, I mean I have to scroll way down again to find the post I was at before.

in reply to Thomas

@Thomas ok, now I get it. I can add an observer on the network state at least on Android (this is a multiplatform project and observing the network state in native code on iOS can be tricky) and see what I can do. Thanks for the suggestion!

For the second problem, that is strange and I can not reproduce it but it looks like the lazy list state is not retained across lifecycle transitions (e.g. when the screen comes back to the resumed state). I'll have a look and investigate further, thanks.

RaccoonForFriendica reshared this.

in reply to Thomas

I created a couple of issues on GitHub to better keep track of these reports... just another small question: does the "position loss" in a list happen only when opening the browser or even when you open another screen in the app, e.g. when opening a user profile if you tap on the post author's avatar?

RaccoonForFriendica reshared this.

in reply to 𝔻𝕚𝕖𝕘𝕠 🦝🧑🏻‍💻🍕

@Dieguito 🦝🧑🏻‍💻🍕 When I leave the app, regardless of whether I open a link or simply open another app, the Raccoon loading screen appears again. I can reproduce this by leaving the app for about a minute. If I go back more quickly, the app often stays where it was.
in reply to Thomas

@Thomas ok then it's the system terminating the process under the hood and recreating it silently (the app remains visible in recent tasks as if it was not dead but it is), e.g.if there are multiple applications opened and the system is hungry for resources.

Process "death" is tricky, I am waiting for this library to become compatible with the navigation library I'm currently using, because with SavedStateHandles it should be possible to handle state restoration across process recreation more easily.

RaccoonForFriendica reshared this.

in reply to Thomas

@Thomas I would go for something like that: allowing users to choose whether they want images always loaded automatically (as-is), never loaded automatically (on demand) or when on WiFi networks.

Is this closer to what you expected?

RaccoonForFriendica reshared this.




This is Behind the Blog, where we share our behind-the-scenes thoughts about how a few of our top stories of the week came together. This week, we talk about the question "are people nutting to that?", doomscrolling on election night, and calls for Lysistrata 2024.#BehindTheBlog


In questa intervista del 1942 Jung (sì, lo psicanalista) dice quello che credo sia tutto quello che c'è da sapere per capire come mai gli americani abbiano votato Trump. Vale per qualunque dittatore.

Alla mia terapeuta ieri dicevo che a votarlo secondo me sono state tutte quelle persone che vorrebbero essere come lui: ricche, potenti, piene di figa, sfacciatamente libere di dire e fare qualunque cosa passi loro per la mente senza patire alcuna conseguenza o quasi. Libere di essere violente e cattive quando e come gli pare.

L'identificazione nel leader ha fatto la magia, anche quando a un osservatore esterno (il resto del mondo, eccettuati gli altri dittattori e aspiranti tali, guardacaso) è chiaro che questo "leader" non abbia alcuna qualità di rilievo, non sia eccezionale se non in negativo.

Siamo prevedibilissimi, ma continuiamo a dimenticarcelo. Continuiamo a non ascoltare chi cerca di farcelo ricordare.

E quindi, se Trump ha vinto è perché Trump è l'America, qui e oggi.

Buona lettura.

oldmagazinearticles.com/carl_j…

#Trump #USpol #ElezioniUSA

in reply to floreana

Forse. Una meditazione seria su questo, invece, è meritata:
spoutible.com/thread/37794003
in reply to floreana

il 'se fosse' va soltanto appogiato con qualche azione sul terreno...

Conosci qulacuno che può fare una mossa?

[siamo ricchi ei parole, come Obama.
Poveracci di azione... lo dico senza rancore, ma per andare avanti]

Unknown parent

@Aladar
Non so: siamo pur sempre bestie ed evidentemente, se uno fa appello alla panza più panza, ha successo.

La domanda che mi faccio è: come la contrasti una forza così viscerale? A cosa fai appello? Alla razionalità non penso, è destinata a venire polverizzata.

La domanda a cui mi piacerebbe trovare risposta è questa. E mi piacerebbe la trovassero tutte le persone, per poche che siano, che ancora concepiscono la politica come un servizio alla popolazione.