Salta al contenuto principale



milliForth-6502, a Forth for the 6502 CPU


Forth is popular on small computers because it is simple to implement, yet quite powerful. But what happens when you really need to shrink it? Well, if your target is the 6502, there’s milliForth-6502.

This is a port of milliForth, which is a fork of sectorforth. The sectorforth project set the standard, implementing a Forth so small it could fit in a 512-byte boot sector. The milliForth project took sectorforth and made it even smaller, weighing in at only 336 bytes. However, both milliForth and sectorforth are for the x86 architecture. With milliForth-6502, [Alvaro G. S. Barcellos] wanted to see how small he could make a 6502 implementation.

So how big is the milliForth-6502 binary? Our tests indicate: 1,110 bytes. It won’t quite fit in a boot sector, but it’s pretty small!

Most of the code for milliForth-6502 is assembly code in sector-6502.s. This code is compiled using tools from the cc65 project. To run the code lib6502 is used for 6502 emulation.

Emulation is all well and good as far as it goes, especially for development and testing, but we’d love to see this code running on a real 6502. Even better would be a 6502 built from scratch! If you get this code running we’d love to hear how it went!

youtube.com/embed/6P4tEYLEhU8?…


hackaday.com/2025/04/20/millif…



Snapchat sapeva tutto: come l’app ha danneggiato milioni di adolescenti


Le e-mail interne inviate dai dipendenti di Snapchat, la popolare app di messaggistica fotografica e video, dimostrano che l’azienda ha deliberatamente danneggiato adolescenti e giovani adulti, ovvero il pubblico a cui si rivolge.

Lo psicologo sociale e autore del best-seller Generation Anxious Jonathan Haidt ha pubblicato la scorsa settimana un articolo su Substack in cui detto che Snap Inc. riceve ogni mese migliaia di segnalazioni di “sextortion”, ovvero estorsione sessuale.

Insieme al ricercatore Zach Rush, ha presentato decine di estratti da rapporti interni, studi, e-mail e dichiarazioni pubbliche in cui i dipendenti e i consulenti di Snap riconoscono che Snapchat danneggia i minori. Secondo gli autori, queste confessioni possono essere raggruppate in cinque aree: uso compulsivo, accesso a droghe e armi, distribuzione di materiale pedopornografico e casi di rapporti intimi forzati, cyberbullismo e consapevolezza di danni e violazioni dell’età senza azioni appropriate da parte dell’azienda.

Così come nel caso Per quanto riguarda TikTok, Haidt e Rush affermano che i dipendenti di Snap erano ben consapevoli della portata del problema, ma non stavano adottando le misure necessarie. Alcune di queste problematiche sono note da tempo, come la funzione “streak“, che conta il numero di giorni consecutivi in ​​cui gli utenti condividono foto.

Ciò crea un falso senso di impegno e attaccamento negli adolescenti, e la perdita di questo “lato positivo” può essere percepita quasi come la perdita di un’amicizia. Allo stesso tempo, l’applicazione in sé rimane un mezzo di comunicazione superficiale: non garantisce un contatto reale e non sostituisce l’interazione dal vivo.

È noto che molti ex dirigenti di colossi della tecnologia, tra cui quelli che hanno partecipato alle riprese del documentario “The Social Dilemma“, non permettono ai propri figli di utilizzare gli smartphone. Sanno fin troppo bene cosa devono affrontare gli utenti, soprattutto quelli più giovani.

E se gli inventori di questi sistemi si rifiutano di affidarli ai propri figli, perché dovrebbero farlo i genitori comuni?

Gli autori del rapporto ritengono che sia giunto il momento di avviare una riflessione seria sulla dipendenza digitale e sulla responsabilità delle aziende tecnologiche.

Forse, con l’aumento delle cause legali e il cambiamento dell’opinione pubblica, più persone inizieranno a considerare il prezzo che pagano per essere costantemente presenti nel mondo digitale.

L'articolo Snapchat sapeva tutto: come l’app ha danneggiato milioni di adolescenti proviene da il blog della sicurezza informatica.




"Nessuna pace è possibile senza un vero disarmo"
oppure
"Il disarmo è possibile in assenza di una minaccia e condizioni stabili".

quando sono stati firmati i trattati di disarmo tra usa e urss? quando una reale politica di distensione ha reso credibile l'idea che davvero non esistesse più una minaccia reciproca.

ora contiamo quante volte la stampa russa, negli ultimi 3 anni, ha minacciato do bombardare le città europee. dovremmo sentirci al sicuro? putin è un allegro burlone che ammassa truppe al confine e minaccia invasioni ma mai e poi mai invaderebbe mai davvero un paese libero? direi di no.

sono nate prima le armi o la violenza? la violenza chiaramente.



The Most Printable 3D Printer Yet


A 3D printer frame made of red plastic is shown on the left-hand side of the image. On the right-hand side, there is a large motor with a plastic frame attached to the frame. Next to the 3D printer, a blue plastic mesh is being fed through a red plastic frame.

Despite the best efforts of the RepRap community over the last twenty years, self-replicating 3D printers have remained a stubbornly elusive goal, largely due to the difficulty of printing electronics. [Brian Minnick]’s fully-printed 3D printer could eventually change that, and he’s already solved an impressive number of technical challenges in the process.

[Brian]’s first step was to make a 3D-printable motor. Instead of the more conventional stepper motors, he designed a fully 3D-printed 3-pole brushed motor. The motor coils are made from solder paste, which the printer applies using a custom syringe-based extruder. The paste is then sintered at a moderate temperature, resulting in traces with a resistivity as low as 0.001 Ω mm, low enough to make effective magnetic coils.

Brushed motors are less accurate than stepper motors, but they do have a particularly useful advantage here: their speed can be controlled simply by varying the voltage. This enables a purely electromechanical control system – no microcontroller on this printer! A 3D-printed data strip encodes instructions for the printer as holes in a plastic sheet, which open and close simple switches in the motor controller. These switches control the speed, direction, and duration of the motors’ movement, letting the data strip encode motion vectors.

Remarkably, the hotend on this printer is also 3D-printed. [Brian] took advantage of the fact that PEEK’s melting point increases by about 110 ℃ when it’s annealed, which should allow an annealed hotend to print itself. So far it’s only extruded PLA, but the idea seems sound.

The video below the break shows a single-axis proof of concept in action. We haven’t been able to find any documentation of a fully-functional 3D printer, but nevertheless, it’s an impressive demonstration. We’ve covered similar printers before, and if you make progress in this area, be sure to send us a tip.

youtube.com/embed/xiygZo0YxBw?…


hackaday.com/2025/04/20/the-mo…





qualsiasi liquido, se sufficientemente viscoso, potrà essere confuso per un solido.


Low Cost Oscilloscope Gets Low Cost Upgrades


Entry-level oscilloscopes are a great way to get some low-cost instrumentation on a test bench, whether it’s for a garage lab or a schoolroom. But the cheapest ones are often cheap for a reason, and even though they work well for the price they won’t stand up to more advanced equipment. But missing features don’t have to stay missing forever, as it’s possible to augment them to get some of these features. [Tommy’s] project shows you one way to make a silk purse from a sow’s ear, at least as it relates to oscilloscopes.

Most of the problem with these lower-cost tools is their low precision due to fewer bits of analog-digital conversion. They also tend to be quite noisy, further lowering the quality of the oscilloscope. [Tommy] is focusing his efforts on the DSO138-mini, an oscilloscope with a bandwidth of 100 kHz and an effective resolution of 10 bits. The first step is to add an anti-aliasing filter to the input, which is essentially a low-pass filter that removes high frequency components of the signal, which could cause a problem due to the lower resolution of the device. After that, digital post-processing is done on the output, which removes noise caused by the system’s power supply, among other things, and essentially acts as a second low-pass filter.

In part 2 of the project, [Tommy] demonstrates the effectiveness of these two methods with experimental data, showing that a good percentage of the noise on a test signal has been removed from the output. All the more impressive here is that the only additional cost besides the inexpensive oscilloscope itself is for a ceramic capacitor that costs around a dollar. We were also impressed: [Tommy] is a junior in high school!

Presumably, you could apply these techniques to other inexpensive equipment, like this even cheaper oscilloscope based on the ESP32.


hackaday.com/2025/04/20/low-co…



Building a Custom Zynq-7000 SoC Development Board from the Ground Up


Zynq-7000 banner.

In this series of 23 YouTube videos [Rich] puts the AMD Zynq-7000 SoC through its paces by building a development board from the ground up to host it along with its peripherals. The Zynq is part FPGA and part CPU, and while it has been around for a while, we don’t see nearly as many projects about it as we’d like.

Rich covers everything from the power system to HDMI, USB, DDR RAM, and everything in between. By the end, he’s able to boot PetaLinux.

The Zynq SoC includes an ARM Cortex-A9 Based APU and an Artix-7 FPGA (or a Kintex-7 FPGA on higher models). In case you missed it, Xilinx was recently acquired by AMD, which is why you might have remembered this as a Xilinx part.

We’ve heard from [Rich] before. Back in 2021 we saw his Arduino Brings USB Mouse To Homebrew Computer. Don’t miss his follow-up playlist: Building on my Zynq-7000 in which he takes his Zynq-7000 board even further.

If you’re interested in FPGA technology but need something more easy going to get you started, be sure to check out how to build a 6809 CPU on an FPGA. Or, if you need something even simpler, report for boot camp.

youtube.com/embed/jbG5KUbGaGE?…

Thanks to [Alex] for the tip!


hackaday.com/2025/04/20/buildi…



Una vergogna senza fine.


E buona Pasqua, riempiamoci la bocca di Pace.


Gli Usa avvertono, 'senza una svolta su Kiev ci sfiliamo'

Fonte: ANSA
search.app/dRKGm



Vasco Rossi: "Resistenza, amore e pace nel mio tour 2025"


Parlando del padre:

"Ha preferito il lager piuttosto che arrendersi al nazifascismo e combattere con i tedeschi contro gli italiani" – ha spiegato – "aveva fatto amicizia con un compagno che gli aveva salvato la vita. Si chiamava Vasco"

agi.it/spettacolo/news/2025-04…



sebbene sia più pericoloso camminare per la strada che prendere un aereo, abbiamo paura degli aerei. siamo incapaci di agire razionalmente, e un giorno questo costerà l'esistenza all'intera specie. meritatamente.


più scorretti e meno trasparenti di tesla esiste qualcosa? dopo il conteggio degli incidenti falsati per la guida automatica nelle statistiche anche questa?


🕊️ Il #MIM augura buona #Pasqua a tutti!
Per gli auguri di quest'anno condividiamo le immagini dello spettacolo delle bambine e dei bambini dell’IC Portella della Ginestra di Vittoria, in provincia di Ragusa, e le opere degli alunni e delle alunne d…




Harvard, ci siamo sbagliati


Riporto dalla newsletter di Haaretz:

The New York Times reported that the White House's antisemitism task force sent Harvard University its letter demanding reforms by mistake.

Ma perché l'estrema destra non riesce a non essere cialtrona? È una sua caratteristica genetica o hanno semplicemente la sfortuna di trovarsi leader cialtroni ad ogni latitudine?



A document viewed by 404 Media describes ICE's plans to incorporate data from the Department of Labor (DOL), Health and Human Services (HHS), and the Department of Housing and Urban Development (HUD) into a tool called ATrac.

A document viewed by 404 Media describes ICEx27;s plans to incorporate data from the Department of Labor (DOL), Health and Human Services (HHS), and the Department of Housing and Urban Development (HUD) into a tool called ATrac.#News

#News #x27


Le nuove direttrici della difesa britannica passano dall’Artico

@Notizie dall'Italia e dal mondo

Il Regno Unito si appresta a rivedere la propria postura militare con un’attenzione crescente verso l’Artico e il cosiddetto “High North”, alla luce dei cambiamenti geopolitici e climatici in atto. Secondo quanto emerge dalla nuova Defence Review – affidata a un team indipendente guidato dall’ex segretario generale della Nato Lord





Colazione al bar in Veneto, sui tavoli vedo solo spritz. Guardo il menù: cappuccino €3,50 e spritz €3,00.

Qui già di prima mattina si scoraggia l’uso di caffè, latte e affini, in favore dell'alcolico spritz. Molto bene.



Claudio Sanfilippo – Un armadio di canzoni. Un viaggio di parole e musica
freezonemagazine.com/articoli/…
Questo libro è come un disco, è pieno di voci, storie, canzoni e segreti da scoprire e assaporare lentamente. “Scrivere canzoni è un ecosistema in cui, più o meno consapevolmente, ci si muove a seminare, irrigare, riflettere, tra vapori acquei, precipitazioni, e concimi che tornano alla terra” (Claudio





Ucraina, spese militari, dazi: cosa dice la dichiarazione congiunta Trump-Meloni dopo il faccia a faccia alla Casa Bianca


@Politica interna, europea e internazionale
Nell’incontro alla Casa Bianca di ieri, giovedì 17 aprile il presidente degli Stati Uniti Donald Trump e la presidente del Consiglio Giorgia Meloni “hanno confermato la loro determinazione a promuovere una relazione reciprocamente vantaggiosa e a




Onde radio contro i droni. Com’è andato il test di Rapid Destroyer

@Notizie dall'Italia e dal mondo

Il ministero della Difesa britannico ha recentemente annunciato il successo di un nuovo sistema d’arma elettronico pensato per contrastare la crescente minaccia rappresentata dai droni sul campo di battaglia. Il dispositivo, chiamato RapidDestroyer, è in grado di neutralizzare più



Come arriveremo al 2% del Pil nella Difesa. I dubbi di Nones

@Notizie dall'Italia e dal mondo

Durante la sua visita a Washington DC, Giorgia Meloni ha affermato che, entro il 2025, l’Italia raggiungerà l’obiettivo Nato del 2% del Pil investito nella Difesa, così come richiesto dall’alleato statunitense. Nel frattempo, in Italia, si discute di come raggiungere tale obiettivo in così poco tempo, tra ipotesi




Occupazione, non c’è niente da festeggiare

@Politica interna, europea e internazionale

I nuovi dati divulgati da Eurostat certificano il record del tasso di occupazione in UE dal 2009, anno di inizio della serie storica. Un segnale apparentemente positivo per l’economia del continente ma causato, in realtà, da dinamiche tutt’altro che incoraggianti. A ben guardare, infatti, per molti membri dell’Unione vi è



Psicoterapia sistemica: cosa si insegna e cosa no.


A rendere la questione piuttosto complicata è il fatto che la terapia familiare è una pratica continuamente in cambiamento, la teoria sistemica applicata alla psicoterapia è da sempre costantemente in cerca di un modo per superarsi. Dalla sua alba questa pratica si è presentata come inquieta e instabile. Diversamente da quanto accade per altri approcci terapeutici, un sistemico che passasse qualche anno su un’isola deserta, al ritorno difficilmente troverebbe tutto come prima.
O almeno è stato così per una fetta importante della sua storia. Questo si deve, credo, a due ragioni soprattutto...

Dal mio blog di psicoterapia:
massimogiuliani.it/blog/2025/0…



Judge says tower dumps violate the 4th amendment, but will let the cops do it this one time, as a treat.#News


Judge Rules Blanket Search of Cell Tower Data Unconstitutional


This article was produced in collaboration with Court Watch, an independent outlet that unearths overlooked court records. Subscribe to them here.

A judge in Nevada has ruled that “tower dumps”—the law enforcement practice of grabbing vast troves of private personal data from cell towers—is unconstitutional. The judge also ruled that the cops could, this one time, still use the evidence they obtained through this unconstitutional search.

Cell towers record the location of phones near them about every seven seconds. When the cops request a tower dump, they ask a telecom for the numbers and personal information of every single phone connected to a tower during a set time period. Depending on the area, these tower dumps can return tens of thousands of numbers.
playlist.megaphone.fm?p=TBIEA2…
Cops have been able to sift through this data to solve crimes. But tower dumps are also a massive privacy violation that flies in the face of the Fourth Amendment, which protects people from unlawful search and seizure. When the cops get a tower dump they’re not just searching and seizing the data of a suspected criminal, they’re sifting through the information of everyone who was in the location.

A Nevada man, Cory Spurlock, is facing charges related to dealing marijuana and a murder-for-hire scheme. Cops used a tower dump to connect his cellphone with the location of some of the crimes he is accused of. Spurlock’s lawyers argued that the tower dump was an unconstitutional search and that the evidence obtained during it should not be. The cops got a warrant to conduct the tower dump but argued it wasn’t technically a “search” and therefore wasn’t subject to the Fourth Amendment.

U.S. District Juste Miranda M. Du rejected this argument, but wouldn’t suppress the evidence. “The Court finds that a tower dump is a search and the warrant law enforcement used to get it is a general warrant forbidden under the Fourth Amendment,” she said in a ruling filed on April 11. “That said, because the Court appears to be the first court within the Ninth Circuit to reach this conclusion and the good faith exception otherwise applies, the Court will not order any evidence suppressed.”

Du argued that the officers acted in good faith when they filed the warrant and that they didn’t know the search was unconstitutional when they conducted it. According to Du, the warrant wasn’t unconstitutional when a judge issued it.

Du’s ruling is the first time the United States Court of Appeals for the Ninth Circuit has ruled on the constitutionality of tower dumps, but this isn’t the first time a federal judge has weighed in. One in Mississippi came to the same conclusion in February. A few weeks later, the Department of Justice appealed the ruling.

There’s a decent chance that one of these cases will wind its way up to the Supreme Court and that SCOTUS will have to make a ruling about tower dumps. The last time the issue was in front of them, they kicked the can back to the lower courts.

In 2018, the Supreme Court considered Carpenter v. United States, a case where the FBI used cell phone location data to investigate a series of robberies. The Court decided that law enforcement agencies violate the Fourth Amendment when they ask for cell phone location data without a warrant. But the ruling was narrow and the Court declined to rule on the issue of tower dumps.

According to the court records for Spurlock’s case, the tower dump that caught him captured the private data of 1,686 users. An expert who testified before the court about the dump noted that “the wireless company users whose phones showed up in the tower dump data did not opt in to sharing their location with their wireless provider, and indeed, could not opt out from appearing in the type of records received in response to [the] warrant.”


#News