Hackaday Links: October 6, 2024
Remember that time a giant cylindrical aquarium in a Berlin hotel bar catastrophically failed and left thousands of fish homeless? We sure do, and further recall that at the time, we were very curious about the engineering details of how this structure failed so spectacularly. At the time, we were sure there’d be plenty of follow-up on that score, but life happened and we forgot all about the story. Luckily, a faithful reader named Craig didn’t, and he helpfully ran down a few follow-up articles that came out last year that are worth looking at.
The first is from prosecutors in Berlin with a report offering three possibilities: that the adhesive holding together the acrylic panels of the aquarium failed; that the base of the tank was dented during recent refurbishment; or that the aquarium was refilled too soon after the repairs, leading to the acrylic panels drying out. We’re a little confused by that last one just from an intuitive standpoint, but each of these possibilities seems hand-wavy enough that the report’s executive summary could have been “Meh, Scheiße happens.”
The conclusions reached in the prosecutor’s report come from a forensic analysis conducted by Professor Christian Bonten, who the building owners commissioned to get to the bottom of things. The work began soon after the accident with an on-site analysis of the debris field, followed by laboratory studies of 90 tonnes of recovered shards. They put over 1,100 hours into the effort, examining evidence down to the molecular level via chemical analysis of the polymer chains in the acrylic. Still, the best they could come up with was that the collapse was “sudden and unexpected,” a sentiment the fish would no doubt agree with, and that there was no way anyone could have predicted it. That’s a bit frightening; while the world isn’t exactly littered with giant aquaria like this, they aren’t unknown either, and the idea that any of these structures could fail without warning is chilling. Especially if you’re a fish.
The Covid pandemic lockdowns were difficult for a lot of people, but they did provide a (hopefully) unique opportunity to observe just how much the activity of 8 billion people has on our planet. We recall a ton of non-intuitive results such as decreased background noise in seismic observations, pollution maps that suddenly cleared up, and even changes in the behavior of wildlife. But one impact we really didn’t see coming during “The Anthropause” was a decrease in the surface temperature on the Moon. Researchers looked at data from six sites on the near side of the Moon during lunar nights from 2017 to 2023, and found a subtle but unmistakable dip in temperatures during April and May of 2020, the peak of the lockdowns. They explain that the decrease was due to lower longwave IR emissions from the Earth’s surface thanks to decreased greenhouse gas emissions during the period, which we find pretty fascinating.
One of the benefits of writing for Hackaday is the crazy random rabbit holes that we get to go down, especially when we’re doing research for an article. Such a thing happened this week with a random thought that popped up while reading something about the International Space Station: What would they do if someone died up there? Thankfully, we’ve had precious few space fatalities in the last 70 years, and those have mostly been restricted to launch and reentry, and hence have been — ahem — extremely energetic deaths.
But with two space stations in orbit hosting long-duration crews in an inhospitable environment, eventually the law of averages is going to catch up to us and someone is just going to die up there. Then what? We found an article from 2021 that attempts to answer this with the help of the indispensable Commander Chris Hadfield, who offers insights that suggest his tours on the ISS have given him plenty of time to mull it over. But the real treat in the article is the idea of adapting an idea known as “promession,” which would involve freezing a corpse in liquid nitrogen and then rapidly vibrating it to break it into tiny bits, suitable for rapid composting. The on-orbit version would skip the liquid nitrogen and use the cold of space, with a robotic arm used to vibrate the astronautsicle and pulverize him or her. The article takes some weird turns — Martian cannibals? — which is understandable given that at the time it was written, NASA didn’t really have a plan for what to do with dead astronauts. But fear not, because they seem to be working on it now.
And finally, we stumbled across a video looking into the mysterious inner workings of vintage elevator controls that we found strangely compelling. The elevator in question is a Schindler lift with an odd design; rather than sliding doors on both the car and the landings, this one just has the doors on the landings, and those are swing-type doors. It’s fascinating to watch the doors glide by as the elevator goes up and down the cleanest elevator shaft we’ve ever seen. Even tidier is the hoist room, which is filled with the snappiest relays and coolest old controls you’ll ever see.
youtube.com/embed/3hFryzaGtJc?…
commento a:
"la frase di Neruda che dice che le guerre si combattono tra persone che si uccidono senza conoscersi... per gli interessi di persone che si conoscono ma non si uccidono."
c'è la narrazione della favola buona, e la favola cattiva. ma entrambe sonno favole. è più complicato di così. il mondo è complicato. prima smetteremo di ragionare in modo lineare, e prima potremo davvero cominciare a risolvere i problemi. quanto detto descrive sicuramente la guerra, ma occorre andare alle cause della guerra. che contrariamente a quello che si crede sono più ideologiche che economiche. l'economia è la scusa, non il motivo. perlomeno molto spesso. è un mito da sfatare. P.S. solitamente ideologie farlocche. chi dice che dietro a tutto ci sono i soldi, sbaglia, c'è semplicemente l'uomo, con le sue imperfezioni. in sostanza la causa delle guerre è molto peggiore e più stupida dei soldi.
Tinkering with Klipper: Making The ManiPilator Robotic Arm
[Leo Goldstien]’s entry into the world of robotics has been full of stops and starts. Like many beginners, he found traditional robotics instructions overwhelming and hard to follow, bogged down with dense math that often obscured the bigger picture. So he decided to approach things differently and create something with his own hands. The result? A 3D-printed robotic arm he affectionately calls “ManiPilator.”
This article is the first in a three-part series documenting [Leo]’s hands-on approach to learning robotics from the ground up. Building ManiPilator became an opportunity to learn by doing, and the project took him on a journey of experimenting, failing, and eventually succeeding in tasks that seemed deceptively simple at first glance. Each hurdle provided him with insights that more traditional learning methods hadn’t delivered. Below is one of the videos [Leo] captured, to show one step in the process: doing a check using multiple motors.
To make his project work, [Leo] relied on open-source software like Klipper, piecing together code and hardware in a way that made sense to him. In sharing his story, he offers fellow beginners an approachable perspective on robotics, with practical insights and candid reflections on the challenges and breakthroughs.
[Leo]’s project shows that there’s more than one way to start exploring robotics, and that sometimes the best way to learn is simply to dive in and start building. Follow along with his journey as he tackles the complexities of robotics, one step at a time.
youtube.com/embed/5LPSJ8xkx9Q?…
NIS 2: un possibile caso di normazione compulsiva
@Informatica (Italy e non Italy 😁)
Il 17 ottobre l’Italia recepirà la Direttiva NIS 2 (CELEX UE 2022/2555) e l’aspettativa che ruota intorno a questa direttiva fa sorgere un dubbio: la Direttiva avrà una sua reale […]
L'articolo NIS 2: un possibile caso di normazione compulsiva proviene da Edoardo Limone.
L'articolo proviene dal blog
Informatica (Italy e non Italy 😁) reshared this.
Tearing Down a Digital Scope from ’78
If you’re a fan of vintage electronics and DIY tinkering, you’ll find this teardown by [Thomas Scherrer] fascinating. In a recent video, he delves into a rare piece of equipment: the Data Lab Transient Recorder DL 901. This device looks like a classic one-channel oscilloscope, complete with all the knobs and settings you’d expect.
The DL 901, made by Data Laboratories Ltd., is a mystery even to [Thomas], who couldn’t find any documentation online. From the DC offset and trigger settings to the sweep time controls, the DL 901 is equipped to handle slow, high-resolution analog-to-digital conversion. The circuitry includes TTL chips and a PMI DAAC 100, a 10-bit digital-to-analog converter. [Thomas] speculates it uses a successive approximation technique for analog-to-digital conversion—a perfect blend of analog finesse and digital processing for its time.
Despite its intriguing features, the DL 901 suffers from a non-responsive analog input system, limiting the teardown to a partial exploration. For those who enjoyed past Hackaday articles on oscilloscope teardowns and analog tech, this one is a treat. Watch the video to see more details and the full process of uncovering this vintage device’s secrets.
youtube.com/embed/EH0JGXbsyd8?…
pratisamlayana reshared this.
Più droni e più economici. La ricetta del Dipartimento della Difesa Usa
@Notizie dall'Italia e dal mondo
[quote]Il Pentagono sta spingendo per ampliare il proprio arsenale di droni economici e monouso, strumenti fondamentali nel conflitto in Ucraina e nelle logiche di attrito che lo caratterizzano da diversi mesi, esplorando il potenziale di produzione di massa offerto dai fornitori commerciali. In una nuova
Notizie dall'Italia e dal mondo reshared this.
3D Printed Hydrofoil Goes From Model Scale To Human Scale With Flight Controller
Hydrofoils have been around for several decades, but watching a craft slice through the water with almost no wake never get old. In the videos after the break, [rctestflight] showcases his ambitious project: transforming a standup paddleboard into a rideable hydrofoil with active stabilization.
Unlike conventional electric hydrofoil boards that depend on rider skill for balance, [rctestflight] aims to create a self-stabilizing system. He began by designing a small-scale model, complete with servo-controlled ailerons and elevators, dual motors for differential thrust, and a dRehmFlight flight controller. A pair of sonar sensors help the flight controller maintain constant height above the water. The wings are completely 3D printed, with integrated hinges for flight control surfaces slots for wiring and control components. It’s better suited for 3D printing than RC aircraft since it’s significantly less sensitive to weight, allowing for more structural reinforcement. The small scale tests were very successful and allowed [rctestflight] to determine that he didn’t need the vertical stabilizer and rudder.
The full-sized version features a scaled up wing, larger servos and motors attached to an 11-foot standup paddleboard — minus its rear end — mounted on commercially available e-foil booms. A foam battery box stores a hefty LiFePO4 battery, while the electronics from the smaller version are repurposed here. Despite only catching glimpses of this larger setup in action at the end of the video, it promises an excitingly smooth lake ride we would certainly like to experience.
We’ve seen several 3D printed hydrofoils around here, but this promised to be the largest successful attempt. Don’t fail us [Daniel].
youtube.com/embed/0eXeOMuBtYo?…
youtube.com/embed/RdVfVoCJZQM?…
Sinistra liberal, il blob che divora la sinistra stessa l Kulturjam
"C’è oggi una sinistra che si autodefinisce liberal progressista che non ha niente a che fare con la propria storia e tradizione. Il suo Occidente non solo non è Marx, e nemmeno è Platone, Spinoza o il cristianesimo ma il mercato e il consumo."
Non diciamo chiodate
@Politica interna, europea e internazionale
L'articolo Non diciamo chiodate proviene da Fondazione Luigi Einaudi.
Politica interna, europea e internazionale reshared this.
Domani si rientra a Berlino dopo aver passato il weekend lungo a Lipsia.
Occasione: la festa nazionale della riunificazione, il 3/10.
Highlights (per chi non è in pellegrinaggio musicale nei luoghi di Bach): il memoriale ENORME della battaglia di Lipsia, che è una roba che dovrebbe trovarsi nei vocabolari alla voce "monumentale", e il museo dell'arte stampata.
Ci sono presse vecchie 100 anni o più ancora funzionanti e in effetti ancora usate dal museo stesso per stampare i propri poster e altri materiali. Ho avuto il culo di vederne due-tre azionate da un addetto. Meraviglie meccaniche, una complessità intricatissima per fondere sul momento intere frasi, comporre una pagina e stamparne centinaia di copie.
La voglia che mi viene di imparare a fare certe cose è fortissima. 😍
Matteo Zenatti likes this.
Quantum Wars. Al Senato Usa cresce l’interesse verso il rilevamento quantisti
@Notizie dall'Italia e dal mondo
[quote]Le Emerging Disruptive Technologies sono uno dei settori principali in cui si dipana il confronto tra gli Stati Uniti e la Repubblica Popolare Cinese, poiché esse sono potenzialmente in grado di sconvolgere i caratteri della guerra moderna, garantendo così un inestimabile vantaggio all’attore che per
Notizie dall'Italia e dal mondo reshared this.
Insomma, gli esempi di finzione burlesca che si possono estrarre dalle pagine dei memorialisti della Resistenza sono infiniti bigarella.wordpress.com/2024/1…
rag. Gustavino Bevilacqua reshared this.
📚Oggi #5ottobre è la Giornata Mondiale degli #Insegnanti!
Quest’anno l’Unesco, che ha istituito la giornata nel 1996, dedica l’iniziativa al tema “Valorizzare la voce degli insegnanti: verso un nuovo contratto sociale per l’istruzione”.
Ministero dell'Istruzione
📚Oggi #5ottobre è la Giornata Mondiale degli #Insegnanti! Quest’anno l’Unesco, che ha istituito la giornata nel 1996, dedica l’iniziativa al tema “Valorizzare la voce degli insegnanti: verso un nuovo contratto sociale per l’istruzione”.Telegram
T’as qui en Histoire?
cristianobacchieri.com/blog/ta…
“T’as qui en Histoire?“, un podcast dedicato alla storia, creato e condotto da Stéphane Genêt, insegnante di storia e autore di libri sull’argomento.
Naturalmente, in francese 😉
@Storia
@Storiaweb
@Podcast
@Cristiano
#podcast
"T'as qui en histoire ?", podcast in francese dedicato alla storia - Cristiano Bacchieri
T'as qui en histoire ?: un podcast in francese che, in episodi di circa 12 minuti, affronta temi legati alla storiaCristiano Bacchieri (Cristiano Bacchieri - Traduttore)
Podcast reshared this.
Assange a Strasburgo: “Oggi sono libero perché mi sono dichiarato colpevole di giornalismo”
Julian Assange è intervenuto all’Assemblea Parlamentare del Consiglio d’Europa (PACE), tenutasi a Strasburgo, con le sue prime dichiarazioni da uomo libero. Una testimonianza che ha spinto la quasi totalità dei parlamentari a riconoscere Assange come prigioniero politico “Signor Presidente, stimati membri dell’Assemblea parlamentare del Consiglio d’Europa, signore e signori. […]L’esperienza dell’isolamento per anni in una […]
HAITI. 70 persone massacrate dalle bande criminali
@Notizie dall'Italia e dal mondo
I membri della banda Gran Grif hanno usato fucili automatici per sparare alla popolazione, uccidendo almeno 70 persone, tra cui circa 10 donne e tre neonati.
L'articolo HAITI. 70 persone massacrate dallehttps://pagineesteri.it/2024/10/04/america-latina/haiti-70-persone-massacrate-dalle-bande-criminali/
Notizie dall'Italia e dal mondo reshared this.
Fincantieri consegna alla Marina Usa la nave litoranea Uss Beloit
@Notizie dall'Italia e dal mondo
[quote]C’è sempre più Italia tra i ranghi Us Navy, che vede aggiungersi alla propria flotta la Uss Beloit, costruita in collaborazione tra Fincantieri e Lockheed-Martin. La Beloit, 29sima del programma per le Navi litoranee da combattimento (Lcs) e 15esima della variante a progettazione monoscafo Freedom,
Notizie dall'Italia e dal mondo reshared this.
Basterà l’accordo tra tra Eda e Bei per sostenere l’industria della difesa europea?
@Notizie dall'Italia e dal mondo
[quote]A piccoli, a tratti microscopici, passi, l’Unione europea si muove per rafforzare il proprio comparto industriale della Difesa. L’accordo stretto tra il Gruppo Banca europea per gli investimenti (Bei) e l’Agenzia Europea per la Difesa (Eda) si pone l’obiettivo di rafforzare le capacità
Notizie dall'Italia e dal mondo reshared this.
Da Trump a Salvini, da Meloni a Orbán: la politica nel nome di Dio
@Politica interna, europea e internazionale
Dio vuole che io sia il presidente. Lo ha fatto intendere Donald Trump all’indomani all’indomani del secondo tentativo di ucciderlo, subito lo scorso 15 settembre. Di una «grande battaglia per difendere l’identità della famiglia, difendere Dio» parlò anche Giorgia Meloni, un anno fa, in
Politica interna, europea e internazionale reshared this.
La Russia fa causa alla multinazionale petrolifera Shell
@Notizie dall'Italia e dal mondo
Al centro della faccenda ci sarebbe l'impianto di Sakhalin, un'isola russa del pacifico le cui autorità, insieme al Ministero dell'energia e alla Gazprom Export hanno presentato regolare denuncia
pagineesteri.it/2024/10/04/var…
Notizie dall'Italia e dal mondo reshared this.
In this special podcast episode, we talk subscriber numbers, what people value, how to get our articles in front of people, and what we're looking to do next year.
In this special podcast episode, we talk subscriber numbers, what people value, how to get our articles in front of people, and what wex27;re looking to do next year.#Podcast
Podcast: One Year Anniversary Subscriber Bonanza
In this special podcast episode, we talk subscriber numbers, what people value, how to get our articles in front of people, and what we're looking to do next year.Joseph Cox (404 Media)
Un report racconta la marcia inarrestabile delle multinazionali
@Notizie dall'Italia e dal mondo
Il nuovo articolo di @valori@poliversity.it
Le multinazionali controllano il 30% del PIL mondiale, e non smettono di crescere. Un report mette nero su bianco le cifre
L'articolo Un report racconta la marcia inarrestabile delle multinazionali proviene da Valori.
Notizie dall'Italia e dal mondo reshared this.
Ministero dell'Istruzione
#NoiSiamoLeScuole questa settimana è dedicato a due scuole palermitane: l’Istituto Superiore “Majorana”, che con i fondi del #PNRR “Scuola 4.Telegram
"...un po' di verità sarebbe una goccia d'acqua contro le bugie che la sinistra dice ai bambini"
È da capire, lui vorrebbe "revisionare" i libri di Storia perché parlano male del suo "eroe" #atestaingiu
Per cui, i libri di storia raccontano bugie, 🤬
e allora bisogna imporre a scuola il nuovo libro del fascista Italo #Bocchino
Brucio in piazza quel libro se lo danno a mia nipote.
Ormai così, alla luce del sole.
Neanche si nascondono più.
#OraeSempreResistenza
Matteo Zenatti
in reply to floreana • • •floreana
in reply to Matteo Zenatti • •Due cose che ho saltato, ecco.
Matteo Zenatti likes this.