Magnetic Core memory was the RAM at the heart of many computer systems through the 1970s, and is undergoing something of a resurgence today since it is easiest form of memory for an enterprising hacker to DIY. [Han] has anexcellent writeup that goes deep in the best-practices of how to wire up core memory, that pairs with his512-bit MagneticCoreMemoryController on GitHub.

Magnetic core memory works by storing data inside the magnetic flux of a ferrite ‘core’. Magnetize it in one direction, you have a 1; the other is a 0. Sensing is current-based, and erases the existing value, requiring a read-rewrite circuit. You want the gory details? Check out [Han]’s writeup; he explains it better than we can, complete with how to wire the ferrites and oscilloscope traces to explain why you want to wiring them that way. It may be the most complete design brief to be written about magnetic core memory to be written this decade.

This little memory pack [Han] built with this information is rock-solid: it ran for 24 hours straight, undergoing multiple continuous memory tests — a total of several gigabytes of information, with zero errors. That was always the strength of ferrite memory, though, along with the fact you can lose power and keep your data. In in the retrocomputer world, 512 bits doesn’t seem like much, but it’s enough to play with. We’ve even featured smaller magnetic core modules, likethe Core 64. (No prize if you guess how many bits that is.) One could be excused for considering them toys; in the old days,you’d have had cabinets full of these sorts of hand-wound memory cards.

Magnetic core memory should not be confused withcore-rope memory, which was a ROM solution of similar vintage. The legendaryApollo Guidance Computer used both.

We’d love to see a hack that makes real use of these pre-modern memory modality– if you know of one, send in a tip.

hackaday.com/2025/07/11/get-ro…

Recently AI risk and benefit evaluation company METR ran a randomized control test (RCT) on a gaggle of experienced open source developers to gain objective data on how the use of LLMs affects their productivity. Their findings were that using LLM-based tools like Cursor Pro with Claude 3.5/3.7 Sonnet reduced productivity by about 19%, with the full study by [Joel Becker] et al. available as PDF.

This study was also intended to establish a methodology to assess the impact from introducing LLM-based tools in software development. In the RCT, 16 experienced open source software developers were given 246 tasks, after which their effective performance was evaluated.

A large focus of the methodology was on creating realistic scenarios instead of using canned benchmarks. This included adding features to code, bug fixes and refactoring, much as they would do in the work on their respective open source projects. The observed increase in the time it took to complete tasks with the LLM’s assistance was found to be likely due to a range of factors, including over-optimism about the LLM tool capabilities, LLMs interfering with existing knowledge on the codebase, poor LLM performance on large codebases, low reliability of the generated code and the LLM doing very poorly on using tactic knowledge and context.

Although METR suggests that this poor showing may improve over time, it seems fair to argue whether LLM coding tools are at all a useful coding partner.

hackaday.com/2025/07/11/measur…

Who doesn’t want an X-ray machine? But you need a special tube and super high voltage, right? [Project 326] says no, and produces a USB-powered device that uses a tube you can pick up two for a dollar. You might guess the machine doesn’t generate X-rays with a lot of energy, and you’d be right. But you can make up for it with long exposure times. Check out the video below, with host [Posh Arthur].

The video admits there are limitations, of course. We were somewhat sad that [Project 326] elected not to share the exact parts list and 3D printed files because in the unlikely event someone managed to hurt themselves with it, there could be a hysterical reaction. We agreed, though, that if you are smart enough to handle this, you’ll be smart enough to figure out how to duplicate it — it doesn’t look that hard, and there are plenty of not-so-subtle clues in the video.

The video points out that you can buy used X-ray tube for about $100, but then you need a 70kV power supply. A 1Z11 tube diode has the same basic internal structure, but isn’t optimized for the purpose. But it does emit X-rays as a natural byproduct of its operation, especially with filament voltage.

The high voltage supply needs to supply at least 1mA at about 20 kV. Part of the problem is that with low X-ray emission, you’ll need long exposure times and, thus, a power supply needs to be able to operate for an extended period. We wondered if you could reduce the duty cycle, which might make the exposure time even longer, but should be easier on the power supply.

The device features a wired remote, allowing for a slight distance between the user and the hot tube. USB power is supplied through a USB-C PD device, which provides a higher voltage. In this case, the project utilizes 20V, which is distributed to two DC-DC converters: one to supply the high-voltage anode and another to drive the filament.

To get the image, he’s using self-developing X-ray film made for dental use. It is relatively sensitive and inexpensive (about a dollar a shot). There are also some lead blocks to reduce stray X-ray emission. Many commercial machines are completely enclosed and we think you could do that with this one, if you wanted to.

You need something that will lie flat on the film. How long did it take? A leaf image needed a 50-minute exposure. Some small ICs took 16 hours! Good thing the film is cheap because you have to experiment to get the exposure correct.

This really makes us want to puzzle out the design and build one, too. If you do, please be careful. This project has a lot to not recommend it: high voltage, X-rays, and lead. If you laugh at danger and want a proper machine, you can build one of those, too.

youtube.com/embed/jLOBMBN8A4A?…

hackaday.com/2025/07/11/diy-x-…

Building a simple 8-bit computer is a great way to understand computing fundamentals, but there’s only so much you can learn by building a system around an existing processor. If you want to learn more, you’ll have to go further and build the CPU yourself, as [MINT] demonstrated with his EPROMINT project (video in Polish, but with English subtitles).

The CPU began when [MINT] began experimenting with uses for his collection of old memory chips, and quickly realized that they could do quite a bit more than store data. After building a development board for single-chip based programmable logic, he decided to build a full CPU out of (E)EPROMs. The resulting circuit spans four large pieces of perfboard, weighs in at over half a kilogram, and took several weeks of soldering to create.

The star of the system is the ALU, which runs an instruction set inspired by the Z80, but with some optimizations and added features. In particular, it has new operations for multiplication, division, bitstream operations, more advanced bit shifting, and a wide range of mathematical functions, including exponents, roots, and trigonometric functions. [MINT] documented all of this in a nicely-formatted offline booklet, available under the project’s GitHub repository. It’s currently only possible to program for the CPU using opcodes or a custom flavor of assembly, but there are plans to write a C compiler for it.

Even without being able to write in a higher-level language than assembly, [MINT] was able to drive a VFD screen with the EPROMINT, which he used to display some clips from The Matrix. This provided an opportunity to demonstrate basic debugging methods, which involved dumping and analyzing the memory contents after a failed program execution.

Using memory chips as programmable logic gates is an interesting hack, and we’ve seen Lisp programs written to make this easier. Of course, this isn’t the first CPU we’ve seen built without any chips intended for logic operations.

youtube.com/embed/xBB1nAUvuqU?…

Thanks to [Piotr] for the tip!

hackaday.com/2025/07/11/design…

Sixteen Israeli experts in international law warned in a public letter that the plans presented by Israel's defense minister to concentrate Gaza's population in a "humanitarian city" constitute a manifestly illegal order and a war crime.

us18.campaign-archive.com/?e=0…

Over on YouTube, [Technology Connections] has a new video: Induction lamps: fluorescent lighting’s final form.

This video is about a wireless fluorescent light which uses induction to transfer power from the electrical system into the lamp. As this lamp doesn’t require wiring it is not prone to “sputtering” as typical fluorescent lights are, thus improving the working life by an order of magnitude. As explained in the video sputtering is the process where the electrodes in a typical fluorescent lamp lose their material over time until they lose their ability to emit electrons at all.

This particular lamp has a power rating of 200 W and light output of 16,000 lumens, which is quite good. But the truly remarkable thing about this type of lighting is its service life. As the lamp is simply a phosphor-coated tube filled with argon gas and a pellet of mercury amalgam it has a theoretically unlimited lifespan. Or let’s call it 23 years.

Given that the service life is so good, why don’t we see induction lamps everywhere? The answer is that the electronics to support them are very expensive, and these days LED lighting has trounced every lighting technology that we’ve ever made in terms of energy efficiency, quality of light, and so on. So induction lamps are obsolete before they ever had their day. Still pretty interesting technology though!

youtube.com/embed/SaKKzZRrPIg?…

Thanks to [Keith Olson] for writing in about this one.

hackaday.com/2025/07/11/an-ind…

è difficile restare fedele ai miei valori e convinzioni.
Non so.. Fare la spesa boicottando prodotti di aziende che traggono profitto dal genocidio palestinese (ad esempio, non mi ero mai resa conto che la mia mayo preferita fosse di Nestlé 🙁

Pause caffè piene di discorsi superficiali e di disinformazione, gossip sui colleghi a cui non voglio partecipare - ma non voglio nemmeno restare sempre isolata.

Essere onesta, in un ambiente di lavoro tossico.

-

*l'articolo non le rende giustizia: la cesta solidale, l'ho -orgogliosamente- creata (e ripristinata diverse volte) io, durante la pandemia, e da allora resiste 😀

#boicottare #cestasolidale #lavoro #valori #mayonnaise #thomy #nestle

Consiglio la lettura di questo libro.

Leggete l'estratto di questo libro, e poi pensate a Travaglio, a Orsini, al Fatto Quotidiano.

Poi chiedetevi perché siamo molto in basso nelle classifiche sull'informazione libera a livello mondiale.

"Secondo il sociologo della Chapman University della California, Andrea Molle, intervistato dalla RAI[76], “l’ideologia del Gruppo Wagner, che si associa alla sua dimensione per così dire aziendale, associa il neonazismo con il neopaganesimo slavo molto diffuso in Russia a partire dagli anni ‘70 del secolo scorso. Io parlerei di una forma esoterica di nazismo”. Il professore fa esplicito riferimento ad una particolare “declinazione dell’ideologia nazionalsocialista” con la quale venivano fusi gli elementi classici del nazismo con altri tipici del misticismo, occultismo ed esoterismo in voga in Germania a cavallo tra il 1800 ed il 1900. “Il Gruppo Wagner - afferma - riprende alcuni di questi contenuti nella propria estetica, come l’uso di rune sui propri mezzi, e nelle ritualità che sembrano caratterizzarlo”. Il sociologo parla anche di contatti tra Wagner e gli ambienti legati all’ultra destra e nazionalisti russi, i cui militanti sarebbero in larga parte impiegati anche nelle operazioni militari in Ucraina, ma non solo russi. Spiega anche che “abbiamo notizie di rapporti tra il gruppo Wagner e altri gruppi di estrema destra in Europa, ma anche negli Stati Uniti e in altri paesi del mondo. Alcuni ricercatori sostengono che negli ultimi anni, membri di gruppi estremisti (ad esempio tedeschi) e dei paesi dell’est Europa abbiano partecipato a sessioni di addestramento organizzate dalle PMC (private military company) russe tra le quali è ragionevole pensare anche il Gruppo Wagner”. Un ruolo determinante nella formazione e nell’addestramento delle milizie non ufficiali delle quali si avvale il Cremlino spetta, come si è visto, al Movimento Imperiale Russo, al quale ha dedicato attenzione anche il Centro per la Sicurezza e la Cooperazione Internazionale (CISAC)[77] centro di ricerca della prestigiosa Università di Stanford in California. Secondo il CISAC, il MIR “è un'organizzazione militante della supremazia bianca di estrema destra con sede a San Pietroburgo, in Russia. Fondato nel 2002, il gruppo promuove il nazionalismo etnico russo, sostiene la restaurazione del regime zarista russo e cerca di alimentare l'estremismo della supremazia bianca in Occidente. MIR (o RIM) mantiene contatti con gruppi neonazisti e suprematisti bianchi in Europa e negli Stati Uniti."

Setaccioli, Marco. Scemi di pace: Come i "pacifinti" ingannano l'Italia, diffondendo e mascherando le menzogne del Cremlino (pp.177-178). Edizione del Kindle.

#ucraina
#guerra
#mosca
#russia
#nazismo
#neonazismo
#wagner
#distopia
#disinformazione
#ilfattoquotidiano
#Orsini