The 555 As A MOSFET Driver
To drive a MOSFET requires more than merely a logic level output, there’s a requirement to charge the device’s gate which necessitates a suitable buffer amplifier. A variety of different approaches can be taken, from a bunch of logic buffers in parallel to a specialised MOSFET driver, but [Mr. T’s Design Graveyard] is here with a surprising alternative. As it turns out, the ever-useful 555 timer chip does the job admirably.
It’s a simple enough circuit, the threshold pin is pulled high so the output goes high, and the PWM drive from an Arduino is hooked up to the reset pin. A bipolar 555 can dump a surprising amount of current, so it’s perfectly happy with a MOSFET. We’re warned that the CMOS variants don’t have this current feature, and he admits that the 555 takes a bit of current itself, but if you have the need and a 555 is in your parts bin, why not!
This will of course come as little surprise to anyone who played with robots back in the day, as a 555 or particularly the 556 dual version made a pretty good and very cheap driver for small motors. If you’ve ever wondered how these classic hips work, we recently featured an in-depth look.
Cisco Ball is the Tumbleweed Opposite of a Disco Ball
Inspiration can strike a maker at any moment. For [Laura Kampf], it happened in the desert when she saw a tumbleweed.
Tumbleweeds roll through the western United States, hitting cars on the interstate and providing some background motion for westerns. [Kampf] found the plant’s intricate, prickly structure mesmerizing, and decided to turn it into a piece of contemplative kinetic art.
[Kampf] attached the tumbleweed to a piece of wood using epoxy and mounted it to what appears to be a worm drive motor nestled inside an interestingly-shaped piece of wood. As the tumbleweed turns, a light shines through it to project a changing shadow on the wall to “create silence, it creates calmness, it takes away from the noise that surrounds it.” While [Kampf] has some work to do to get the sculpture to its finished state, we can get behind her mantra, “The most important thing about the phase of execution is to get started.”
Are you looking for some projects of your own to help you find calm? How about some ambient lighting, a sand drawing table, or a music player that keeps things simple?
A Two-Stroke Engine Made From Scratch Using Basic Hardware Store Parts
A working DIY two-stroke in all of its glory, with the flywheel removed. (Credit: Camden Bowen)
How hard could it to be to build a two-stroke internal combustion engine (ICE) from scratch? This is a challenge that [Camden Bowen] gladly set for himself, while foregoing such obvious wastes of time like first doing an in-depth literature study on the topic. That said, he did do some research and made the design in OnShape CAD before making his way over to the hardware store to make some purchases.
As it turns out, you can indeed build a two-stroke engine from scratch, using little more than some metal piping and other parts from the hardware store. You also need a welder and a lathe, with [Camden] using a Vevor mini-lathe that totally puts the ‘precision’ in ‘chatter’. As building an ICE requires a number of relatively basic parts that have to move with very little friction and with tight tolerances, this posed some challenges, but nothing that some DIY spirit can’t fix.
In the case of the very flexible boring bar on the lathe, improvising with some sturdy metal stock welded to a short boring bar resolved that, and precision was achieved. Together with an angle grinder, [Camden] was then able to manufacture the crank case, the cylinder and crank shaft and all the other pieces that make up an ICE. For the carburetor he used a unit off Amazon, which turned out to have the wrong throat size at 19 mm, but a 13 mm version worked. Ultimately, the first ICE constructed this way got destroyed mostly by running it dry and having the starter fluid acting as a solvent, but a full rebuild fixed all the issues.
This second attempt actually ran just fine the first time around, with oil in the crank case so that the poor engine wasn’t running dry any more. With a 40:1 fuel/oil mixture the little engine idles and runs as well as a two-stroke can, belching blue smoke and making a ruckus. This answers the question of whether you can build a two-stroke ICE with basic machining skills and tools, but of course the question that’s now on everyone’s lips is whether a four-stroke one would be nearly as ‘easy’. We wait with bated breath.
BANGLADESH. Esercito annuncia un governo ad interim dopo la fuga di Sheikh Hasina
@Notizie dall'Italia e dal mondo
Le dimissioni della premier sembrano aver disinnescato la forte tensione a Dhaka. Centinaia di morti nelle proteste
L'articolo pagineesteri.it/2024/08/05/asi…
Notizie dall'Italia e dal mondo reshared this.
Asteroids: Kessler Syndrome Edition
Asteroids, the late-70s arcade hit, was an immensely popular game. Often those with the simplest premise, while maintaining a fun, lighthearted gameplay have the most cultural impact and longest legacy. But, although it was popular, it doesn’t really meet the high bar of scientific fidelity that some gamers are looking for. That’s why [Attoparsec] built the Kessler Syndrome Edition of this classic arcade game.
The Kessler Syndrome is a condition where so much man-made debris piles up in low-Earth orbit that nothing can occupy this orbit without getting damaged or destroyed by the debris, and thus turning into more debris itself in a terrible positive feedback loop. [Attoparsec] brings this idea to Asteroids by reprogramming the game so that asteroids can be shot into smaller and smaller pieces but which never disappear, quickly turning the game into a runaway Kessler Syndrome where the chance of survival is extremely limited, and even a destroyed player’s ship turns into space junk as well.
To further the scientific accuracy and improve playability, though, he’s added a repulsor beam mechanism which can push the debris a bit and prolong the player’s life, and also added mass effect reactions so that even shooting bullets repels the player’s ship a bit. The build doesn’t stop with software, either. He also built a custom 70s-style arcade cabinet from the ground to host the game.
Asteroids is still a popular platform for unique builds like this. Take a look at a light-vector game using lasers to create the graphics, or this tiny version of the game that uses a real CRT.
Thanks to [smellsofbikes] for the tip!
Alimenti senza lattosio per tutti o solo per gli intolleranti?
Prosegue la rubrica della dietista Abril González Campos…
L'articolo Alimenti senza lattosio per tutti o solo per gli intolleranti? proviene da Il Fatto Alimentare.
Mozzarella e fior di latte: differenze, aspetti nutrizionali e prezzi dei protagonisti dell’estate
La mozzarella, protagonista della pizza, dell’insalata caprese e…
L'articolo Mozzarella e fior di latte: differenze, aspetti nutrizionali e prezzi dei protagonisti dell’estate proviene da Il Fatto Alimentare.
Embedded Python: MicroPython Toolkits
Last time, I talked about how MicroPython is powerful and deserving of a place in your toolkit, and it made for a lively discussion. I’m glad to see that overall, MicroPython has indeed been getting the recognition it deserves – I’ve built a large number of wonderful projects with it, and so have people I’ve shown it to!
Sometimes I see newcomers dissatisfied with MicroPython, because the helper tools they initially pick don’t suit it well. For instance, they try and start out with a regular serial terminal application that doesn’t fit the MicroPython constraints, or a general IDE that requires a fair bit of clicking around every time you need to run your code. In particular, I’d make sure that you know your options no matter whether you prefer GUI or commandline – both have seriously nice tools for MicroPython use!
The main problem to be solved with MicroPython is that you have a single serial port that everything happens through – both file upload and also debugging. For ESP8266/32-based boards, it’s a physical serial port, and for chips like RP2040 and ESP32-S* where a hardware USB peripheral is available, it’s a virtual one – which makes things harder because the virtual port might get re-enumerated every now and then, possibly surprising your terminal application. If you want to upload a program of yours, you need to free up the serial port, and to see the program’s output, you will need to reopen that port immediately after – not a convenient thing to do if you’re using something like PuTTy.
So, using MicroPython-friendly software is a must for a comfortable hacking experience. What are your options?
Power Of Thonny And Friends
Whether you’re primarily a GUI user, or you’re teaching someone that is, Thonny is undoubtedly number one in MicroPython world – it’s an IDE developed with Python in mind, and it has seriously impressive MicroPython integrations. Your board’s terminal is being managed as if effortlessly in the background – just open your files in different tabs as you normally do, and press the Run button sometimes.
Expecting more? There is more – basically anything MicroPython adjacent you’d do from commandline, is present in Thonny in a comfortable way. For instance, are you working with an ESP32 board that doesn’t yet have a MicroPython image in its flash? Lucky you, there’s an esptool integration that lets you flash an image into your MCU through a dialog box. Want debugging? There’s single-step debugging that works in an intuitive user-friendly way – you’d find this pretty hard to happen from console apart from specially engineered print statements, but Thonny delivers.
youtube.com/embed/EMAye6AlHFc?…
Not looking to pick a new IDE? There are VSCode extensions. Arduino IDE more your jam? Yeah, well, remember how Arduino has a MicroPython IDE now? It’s decently usable, so if you got used to the Arduino keybindings, you might like it. More of a commandline user? You’ve got a good few options, then, and they are similarly powerful.
Mpremote And Ampy
Rather use the terminal? Maybe IDEs are too clunky for you and the terminal window’s cleanliness provides for a distraction-free environment you can only dream about, maybe it’s just the thing you’ve used your entire life, or maybe you’re even debugging a MicroPython device over an SSH connection? mpremote
is the tool to save you.
mpremote
is part of the MicroPython project, it’s developed alongside the project, and it’s got plenty of killer features to show for it. It includes an “inline” terminal emulator that lets you access REPL effortlessly to see your code’s results and interact with the variables afterwards, correctly managing things like Ctrl+C so you can interrupt your code if needed and still poke at its variables in the REPL. You can also explore the MicroPython filesystem Linux-style with ease, and, most importantly, you can mount your current directory up to it with mpremote mount
, and mpremote
will send files to your board as the on-MCU interpreter requests them.
Overall, mpremote
offers a seriously comfortable environment for iterating on MicroPython code lightning quick. Without it, you would need to reopen the serial port each time you need to upload a new file – here, you can just chain a bunch of commands together and mpremote
will dutifully do the serial port juggling needed to get you there.
In addition to that, you can see that mpremote
is designed to help you with awkward-to-do things you didn’t know you needed to do. Need to sync your board’s RTC time with your computer’s time? That’s a mpremote rtc
command away. Want to access the MicroPython package manager? That’s mpremote mip
. Your board needs to switch into bootloader mode? No need to fiddle with buttons, just use mpremote bootloader
. In short, mpremote
is a MicroPython powerhouse for everyone who’s most comfortable in a terminal window.
youtube.com/embed/sc6ND-1QZH0?…
There is an alternative here, too: ampy
, a personal choice of mine, which I use combined with screen
. Ampy
is a tool initially designed by Adafruit, and it’s more barebones – I like it because I have control of what’s happening when I issue a command to a software, keeping my MicroPython devices in a known state at all times. On the other hand, it does require jugging the serial port on your own, so when I need to update my code, I exit screen
, run the ampy
command, then re-enter screen
again. I regularly work with large MicroPython files that also import static library files that don’t change for months, however, so having control of the upload process seems to save me a fair bit of time.
There are caveats, of course – the major one is, when using screen
in serial terminal mode, you need to press `Ctrl+A k y` (kill window) instead of `Ctrl+A d` to detach the screen session. If you do the detach instead, as you might be used to with screen
, the serial port will remain open until you unplug the device or kill the screen process, and ampy
will fail mysteriously.
Summary
I hope this toolkit overview helps you make sure you’re using exactly the kind of MicroPython environment that works for you – while compiling it, I’ve learned some nuances myself! Next time, we shall talk about CircuitPython – a MicroPython fork that has grown into a contender in the educational Python space, and how it is different from MicroPython in a number of crucial ways you deserve to know about.
Einaudi: il pensiero e l’azione – “Via il Prefetto” con Claudio Cresatti
Lo storico scritto di Einaudi in cui propone l’abolizione dei prefetti e critica il centralismo napoleonico. Rubrica “Einaudi: il pensiero e l’azione”
L'articolo Einaudi: il pensiero e l’azione – “Via il Prefetto” con Claudio Cresatti proviene da Fondazione Luigi Einaudi.
di Edi Arnaud, Paolo Cacciari, Marinella Correggia, Marino Ruzzenenti -
Il ricordo
Giovanna Ricoveri se ne è andata, a Genova, nella notte fra il 3 e il 4 agosto. Cinque anni dopo Giorgio Nebbia, con il quale aveva collaborato fin dal 1991, anno di nascita dell’edizione italiana di Cns-Capitalismo Natura Socialismo. La rivista di ecologia politica, diretta da Giovanna e da Valentino Parlato, faceva parte di una rete internazionale creata due anni prima in California da James O’Connor, il teorico della seconda contraddizione: quella fra capitale e natura.
Nata a Rosignano, sulla costa livornese, Giovanna Ricoveri aveva iniziato a collaborare stabilmente con la Cgil nei primi anni 1970, un impegno durato fino ai primi anni 1990. In seguito, dirigendo Cns, diventata poi Cns-Ecologia politica, si dedicò ad analizzare tre grandi questioni a lungo trascurate o negate dalle forze politiche della sinistra: la crisi ecologica come causa importante di crisi economica e sociale; lavoro e natura come due contraddizioni speculari che nel capitalismo maturo vanno affrontate insieme, due facce della stessa medaglia; l’importanza dei movimenti sociali nel superamento della crisi. Negli anni 1990, forse solo su Cns si potevano leggere saggi guidati dalle interconnessioni che cromaticamente potremmo riassumere nella definizione “rosso-verde”.
Giovanna fu anche straordinaria curatrice di diversi libri. Sviluppò l’idea della centralità della natura anche grazie ai rapporti con l’eco-femminismo a livello internazionale. Approfondì con passione l’antica eppure attualissima tematica dei beni comuni e si inserì, lei proveniente dal sindacato, nel dibattito internazionale sulla decrescita. Le tante persone che – come noi – hanno avuto Giovanna come compagna di pensiero e attività, e come amica, sono approdate a lei per vie diverse.
Chi partendo dal mondo del lavoro, chi da quello dell’ecologia. Giovanna era profondamente legata all’idea che per affrontare la crisi ecologica fosse indispensabile il contributo del movimento dei lavoratori, di chi agiva direttamente all’interno del sistema produttivo. E d’altro canto, per un vero ambientalismo che intendesse cambiare la società, era indispensabile il contributo dei lavoratori. Questione sociale e questione ecologica come inscindibilmente unite, una convergenza necessaria, ecco il messaggio centrale di Giovanna.
Un contributo che ci mancherà, in un mondo pervaso dalla convinzione che il neoliberismo si possa in qualche modo governare, e che la questione ecologica si possa risolvere con la green economy, mantenendo intanto il sistema capitalistico. Tanti i ricordi personali. Gli incontri con lei nella sua casa-ufficio erano sempre densi, a volte agitati, mai noiosi. Prima di passare all’enorme tavolo da lavoro, bianco e un po’ traballante sotto il peso di libri e fascicoli, l’accoglienza avveniva in cucina con il caffè e i biscotti.
E come dimenticare i piatti toscani che cucinava anche per i vegetariani. Negli ultimi due mesi aveva avuto un’emorragia cerebrale dalla quale purtroppo non si era più ripresa. Nel libro collettivo pubblicato dalla Fondazione Luigi Micheletti nel 2016 per festeggiare i 90 anni di Giorgio Nebbia, Giovanna si esprimeva così: “Giorgio è uno scienziato che ha cuore e intelligenza”. Giovanna, valeva anche per te. Un abbraccio alla famiglia e in particolare alle nipoti Eleonora e Luisa.
Giovanna Ricoveri, l’ ambientalismo per cambiare la società
di Edi Arnaud, Paolo Cacciari, Marinella Correggia, Marino Ruzzenenti - Il ricordo Giovanna Ricoveri se ne è andata, a Genova, nella notte fra il 3 e ilRifondazione Comunista
rag. Gustavino Bevilacqua reshared this.
Truppe Usa fuori anche dall’ultima base in Niger. Gli effetti sulla regione
[quote]Gli Stati Uniti abbandonano oggi la seconda e ultima base aerea 201 in Niger, marcando il ritiro delle loro forze da un Paese assolutamente strategico nel continente africano. Questa decisione arriva dopo che, nel mese di marzo, un portavoce militare nigerino ha annunciato la fine dell’accordo di controterrorismo con gli Stati
Mulé a TPI: “Forza Italia non deve chiudersi in cerchi magici, è ora di aprirsi come nel 1994”
@Politica interna, europea e internazionale
Presidente Mulè, proprio non riusciamo a uscire dagli anni di piombo? Anche gli anniversari delle stragi di Bologna e dell’Italicus sono una ragione per l’ennesima contrapposizione sul ventennio mai passato. “Il nostro problema, il
Politica interna, europea e internazionale reshared this.
Esempio di come inserire un testo alternativo nelle immagini
Il post è stato utilizzato qui come esempio per la guida di Friendica
Immagine senza #AltText:
Immagine con link alla fonte dell'immagine e testo alternativo:
Il futuro della guerra è qui. Cosa deve fare il Pentagono secondo Foreign Affairs
[quote]“L’America non è pronta per le guerre del futuro. E sono già qui”. Un titolo (con annesso sottotitolo) che potrebbe risultare allarmistico e volutamente esagerato, come già altri lo sono stati nei mesi e negli anni precedenti. Ma se a prendere questa posizione piuttosto
reshared this
#NotiziePerLaScuola
È disponibile il nuovo numero della newsletter del Ministero dell’Istruzione e del Merito.
🔶 Istruzione tecnica e professionale, la riforma è legge.
Ministero dell'Istruzione
#NotiziePerLaScuola È disponibile il nuovo numero della newsletter del Ministero dell’Istruzione e del Merito. 🔶 Istruzione tecnica e professionale, la riforma è legge.Telegram
Poliverso & Poliversity reshared this.
Tutti i dettagli sul nuovo pattugliatore di Fincantieri/Leonardo per la Marina
[quote]La Marina Militare Italiana ha ufficialmente incaricato Orizzonte sistemi navali (Osn) di costruire il quarto pattugliatore di nuova generazione nell’ambito del programma Opv (Offshore patrol vessel). Osn, una joint venture tra Fincantieri e Leonardo, con rispettive quote del 51% e 49%, ha ricevuto la notifica
La decimazione del mondo accademico di Gaza è ‘impossibile da quantificare’
@Notizie dall'Italia e dal mondo
Con migliaia di docenti e studenti probabilmente uccisi e i campus distrutti, le università palestinesi della Striscia provano a sopravvivere allo "scolasticidio"
L'articolo La decimazione del mondo accademico di Gaza è ‘impossibile da quantificare’
Notizie dall'Italia e dal mondo reshared this.
Source:
t.co/8O0xwHPzho
#UN #humanrightscouncil #palestine
Greenpeace: Eni continua a estrarre gas e petrolio ignorando l’Accordo di Parigi
@Notizie dall'Italia e dal mondo
Il nuovo articolo di @valori
Eni è operatore o azionista in 552 progetti fossili che hanno iniziato, o inizieranno, le attività estrattive dopo il 2015. Lo svela un report di Greenpeace
L'articolo Greenpeace: Eni continua a estrarre gas e petrolio ignorando l’Accordo di Parigi proviene
Notizie dall'Italia e dal mondo reshared this.
Welcome back to another edition of the weekly-ish news of the fediverse. This edition contains the news of last week, as well as some news items from the previous few weeks that I’ve spotted while I was on holiday break.
[share author='Laurens Hof' profile='https://fediversereport.com/author/laurenshof/' avatar='https://poliverso.org/photo/206608119366e42c304ffac007248590-5.jpeg?ts=1734620326' link='https://fediversereport.com/last-week-in-fediverse-ep-78/' posted='2024-08-04 18:07:25' guid='08552256-1ddb99c7716650c2-f2303ba4' message_id='https://fediversereport.com/last-week-in-fediverse-ep-78/']Last Week in Fediverse – ep 78
Welcome back to another edition of the weekly-ish news of the fediverse. This edition contains the news of last week, as well as some news items from the previous few weeks that I’ve spotted while I was on holiday break. My holiday was indeed fully offline out of the feeds, but I could not resist afterwards to dig in to find out what happened while I was offline.
As a teaser: I’ve started working behind the scenes to launch something new with Fediverse Report, that will be in addition to the weekly newsletters. Stay tuned!
The News
GoToSocial’s latest release adds comment-controls, which allows people to determine who can reply to their posts. GoToSocial explains: ‘you’ll be able to configure your account so that new posts created by you will have an interaction policy set on them, which determines whether your instance drops or accepts replies, likes, and boosts of your posts, depending on the visibility of the post, and whether or not an account trying to interact with you is in your followers/following list.’
Safety has been a major conversation on the fediverse feeds recently, especially with Black people pointing out the lacking safety tools and major harrassment they experience on the fediverse. One aspect that facilitates the harassment is the default opt-out approach to federation; where racists and other bigots will simply spin up a new fediverse server and send (semi)-private messages with hate speech to Black people. This is why ‘just switch to a server with better moderation’ is such a problematic response; it does not actually fix one of the main ways Black people experience on the fediverse, while placing the onus on them to solve the problem. One interesting response is in building a separate network with ActivityPub based on allow-list federation, and I’m keeping a close eye on how this evolves.
PeerTube’s latest update adds ‘automatic video transcription using Whisper , a new comment policy “requires approval first”, auto-tagging/labelling of videos and comments based on specific rules and a comment moderation page for video publishers’. This blog post provides more details about the development story on adding the transcription feature.
Patchwork is an upcoming plugin system for Mastodon that is developed by Newsmast, that is tentatively scheduled to be released next month. The latest update by Newsmast showcases the variety of plugins that they’ll offer, including setting local-only posts, changing post length, and scheduling posts. The bigger part is also the addition of Channels, custom timelines that will allow external parties to hook into as well.
Some statistics that relate compare the different platforms. A comparison of sources of traffic to news site heise.de, showing how Bluesky has surpassed Mastodon in clicks. A new comparison by Kuba Suder shows the different ways people post on Bluesky that is not done via a PDS that is hosted by Bluesky company. In February this year, Bluesky started support for having people self-host their own Personal Data Server (PDS) that is not managed by their company. The amount of people who do so is small, with less than 100 active account. Significantly more people post onto Bluesky via their bridged ActivityPub account. Speaking of bridged accounts: Eugen Rochko has now bridged his Mastodon account to Bluesky. Rochko has been outspokenly critical of Bluesky in the past, saying that they should adopt ActivityPub instead of building their own protocol.
Some more updates by Ghost, who is getting along further with their ActivityPub implementation. The newsletter is now getting better connected to the fediverse, allowing you to follow it directly from your Mastodon account.
Mastodon moves their iOS app development in-house, and is recruiting a full-time iOS app developer. Up until now, the Mastodon iOS app was developed by two freelance developers.
A slightly obscure news update because I love interoperability: Guppe Groups have been around for a while, and are a way to get some semblance of Groups added onto microblogging platforms, functioning similar to hashtags. Now link-aggregator platform PieFed has added support for these types of groups, you can see an example here. I’m mentioning this news here because I think there is a lot more space to experiment with different platform designs that take inspiration from both microblogging, link-aggregators and forums, and this is a small example of it. PieFed added support for community wikis as well.
Bluesky released Starter Packs a month ago as a way to easy the onboarding process, and reactions on the rest of the fediverse were that this was a good idea that could potentially be copied. Statistics show however that the feature has not been actively used by the community. Part of the reason could be that signups to decentralised social networks in general have mostly stopped.
WeDistribute wrote about NeoDB, calling it ‘a review system for culture’. NeoDB is one of the more interesting platforms available in the fediverse, with an incredible wide variety of features. NeoDB themselves describes by drawing comparison to other platforms, saying ‘NeoDB integrates the functionalities of platforms like Goodreads, Letterboxd, RateYourMusic, and Podchaser, among others.’ NeoDB’s own pitch is taking fediverse platforms tendency to be ‘centralised platform concept + ActivityPub’ to the extreme, and I enjoy the simplicity of NeoDB is a fediverse review platform for culture more.
What is the fediverse? This question is answered by a tech-free explainer video by Newsmast, a new video series by WordPress.com, or a podcast episode by TheNewStack with Evan Prodromou.
The latest update for software forge Forgejo has foundational parts of ActivityPub based federation, and the first forgejo instances that have federation in some alpha form are starting to appear.
The Links
- Privacy and Consent for Fediverse Developers: A Guide – by WeDistribute.
- ‘Rethinking Trust and Safety in the Fediverse, with Samantha Lai and Jaz-Michael King’ – the latest podcast episode by Flipboards dot social podcast.
- An update on the Bridgy Fed, the bridge between the fediverse, Bluesky and the web, and websites can now be bridged directly onto Bluesky.
- A tool to view all labels applied on your Bluesky. posts and account.
- Replies from the fediverse can now be read on Threads.
- The history of the fediverse logo.
- The third party app for Pixelfed Vernissage has been renamed to Impressia. Vernissage is now exclusively the name for the fediverse photo sharing platform that is currently in development by the same developer.
- A tool to temporarily mute words in Bluesky.
- An experimental demo of how a “Sign in with the Fediverse” mechanism might work.
- IceShrimp originally started as a Misskey fork, but they have changed so much it is starting to make more sense to see it as their own project: a full rewrite of the backend, and now the added support for plugins.
- Smoke Signal is a new event planner platform that is in development and build on top of atproto.
- The newsletter ‘The Future is Federated’ has a showcase of the interoperability between Mastodon and WordPress.
- An extensive comparison how different apps for Lemmy display content correctly.
- This week’s overview of fediverse software updates.
- Activitypub.academy is ‘a modified Mastodon instance that allows you to study the ActivityPub protocol in real life’ that has gotten some new features.
- In the main Bluesky app, if you block someone and you have a thread in which both you and the blocked account have posted replies, it prevents other people from viewing those posts, which often breaks the thread. This system, the ‘apocalypseblock’ is intentional for Bluesky, but the openness of the protocol allows people to build other thread viewers that do not have this feature.
That’s all for this week, thanks for reading!
Stefano Andaloro reshared this.
Spadolini, un italiano
[quote]Forse anche per il suo aspetto esteriore pingue e pacioso, da professore d’altri tempi, Giovanni Spadolini è ricordato soprattutto come un grande mediatore. E certamente il leader repubblicano, di cui ricorre il trentennale della morte avvenuta il 4 agosto 1994, possedeva notevoli doti di equilibrio, che gli permettevano di giocare un ruolo di rilievo in […]
L'articolo
ci sono 2 modi di agire: razionale e istintivo. se condanniamo l'operato umano in base a "sentimenti" e paure stiamo agendo a livello istintivo. come agisce un animale. quindi usiamo la natura animale dell'uomo per definirlo lontano da ideali "animali" di una perfezione che in realtà, un etologo, direbbe "lontani" dal vero comportamento animale, profondamente amorale. e come volere un uomo che abbia valori superiori e morali e poi criticarlo di non essere degno animale.
e come se ci fossimo romanzati una natura che non esiste, con animali "virtuosi", secondo canoni umani e non animali, e poi accusiamo l'uomo di comportarsi come un animale e di essere lontano dalla natura. ha senso? no. un autentico corto-circuito del pensiero. la specie umana non può essere contemporaneamente umorale e animale e distante dalla natura e "amorale" sulla base di canoni animali che ci siamo inventati noi.
mi piacerebbe qualcuno mi aiutasse a mettere meglio a fuoco questo discorso.
After 303 days of genocidal war on #Gaza, extensively documented and broadcasted every second, one truth remains: the world is indifferent & lacking compassion. Tens of thousands of lives have been lost—entire families, including children, women, the elderly, and young people
https://t.ly/5zPN0
reshared this
Sudan, dopo dichiarazione di carestia appello per maggiore supporto umanitario
L'articolo proviene dal blog di @Davide Tommasin ዳቪድ ed è stato ricondiviso sulla comunità Lemmy @Notizie dall'Italia e dal mondo
Gli umanitari hanno lanciato un appello “per maggiori risorse per il Sudan devastato dalla guerra e per il libero accesso alle persone bisognose,
Etiopia, visita del ministro degli Esteri turco mette in luce investimenti strategici e relazioni
L'articolo proviene dal blog di @Davide Tommasin ዳቪድ ed è stato ricondiviso sulla comunità Lemmy @Notizie dall'Italia e dal mondo
Il ministro degli Esteri turco Hakan Fidan ha visitato Addis Abeba, dove è stato accolto calorosamente dal primo
Burkina Faso, creazione di un deposito del Tesoro per l’indipendenza dal franco CFA
L'articolo proviene dal blog di @Davide Tommasin ዳቪድ ed è stato ricondiviso sulla comunità Lemmy @Notizie dall'Italia e dal mondo
La Treasury Deposit Bank verrà lanciata domani: i giorni del franco CFA sono contati. Il Burkina Faso 🇧🇫 ha finalmente creato una banca di deposito
SOMALIA. Attentato suicida fa decine di vittime sulla spiaggia di Mogadiscio
@Notizie dall'Italia e dal mondo
Un'esplosione ha causato almeno 32 morti e 63 feriti su una popolare spiaggia di Mogadiscio, la sera di venerdì 2 agosto. Il gruppo al Shebaab, legato ad al-Qaeda, ha rivendicato l'attentato.
L'articolo SOMALIA. Attentato suicida fa decine di vittime
Tutti i dischi anni ’70 dei Magma, dal peggiore al migliore | Rolling Stone Italia
"Un linguaggio inventato, un pianeta alternativo chiamato Kobaïa, una musica possente. Un viaggio nel mondo e nella discografia migliore della band di Christian Vander, prog a modo suo."
...e continuò il suo viaggio tutto allegro!
Come cristiani –alle volte– dobbiamo riscoprire la grazia sovrabbondante di Dio, insieme agli altri fratelli e sorelle, e ricomprenderla nelle varie situazioni della nostra esistenza. Anche se non sono particolarmente facili o affatto gioiose.
Ricevendo il messaggio di salvezza, viviamo con gioia e allegria la nostra vita giorno per giorno, ringraziando il Salvatore.
pastore D'Archino - …e continuò il suo viaggio tutto allegro
Nel libro degli Atti si vede come l’annuncio dell’evangelo si diffonda a poco a poco oltre le ristretta cerchia dei primi discepoli. Qui c’è un etiope, che nell’idea popolare di allora viveva ai co…pastore D'Archino
Turchia confessa di aver permesso di schierare suoi droni coinvolti nei massacri di massa di civili
L'articolo proviene dal blog di @Davide Tommasin ዳቪድ ed è stato ricondiviso sulla comunità Lemmy @Notizie dall'Italia e dal mondo
Un alto funzionario del governo turco ha riconosciuto che la Turchia ha concesso il permesso all’Etiopia di schierare droni armati fabbricati
reshared this
Strage di Bologna, Meloni: “Pericoloso dire che le radici dell’attentato sono nella destra di governo”
@Politica interna, europea e internazionale
“Sono profondamente e personalmente colpita dagli attacchi ingiustificati e fuori misura che sono stati rivolti, in questa giornata di commemorazione, alla sottoscritta e al Governo. Sostenere che le “radici di quell’attentato oggi figurano a pieno titolo nella destra di
Kamala Harris, la retorica neoliberale dell’intersectional capitalism e la “democrazia” americana l L'Antidiplomatico
"Sappiamo benissimo che, in qualunque caso, chiunque vinca porterà avanti senza fine le volontà dell'unipolarismo a trazione atlantista e le sue guerre senza variazioni sostanziali di programma tra Repubblicani e Democratici. Nonostante ciò tutta l'euro-anglo-sfera si fa continuamente abbindolare, affascinare e appassionare dalle campagne elettorali USA come se fossero un evento unico nel suo genere, mentre in realtà sono solo un fenomeno scontato e prevedibile, oltre ad essere un prodotto di comunicazione politica in nome del marketing pubblicitario."
lantidiplomatico.it/dettnews-k…
L'antidiplomatico - Liberi di svelarvi il mondo
Nigeria, uccisioni tra i manifestanti contro l’alto costo della vita
L'articolo proviene dal blog di @Davide Tommasin ዳቪድ ed è stato ricondiviso sulla comunità Lemmy @Notizie dall'Italia e dal mondo
LAGOS, Nigeria – Almeno sette persone sono state uccise in Nigeria durante le proteste a livello nazionale contro l’aumento del costo della vita e il malgoverno. Migliaia di
reshared this
Dieci anni dopo il massacro di Shengal gli ezidi rimangono dispersi
@Notizie dall'Italia e dal mondo
Sono disperse, fatte schiave, rifugiate nelle tendopoli o morte in cattività molte delle persone catturate o cacciate durante il terribile attacco dello Stato islamico a Shengal, che ebbe inizio il 3 agosto 2014.
L'articolo Dieci anni dopo il massacro di Shengal gli
Il Wwf propone una nuova tassonomia, indipendente e innovativa
@Notizie dall'Italia e dal mondo
Il nuovo articolo di @valori
Il Wwf propone l’Isbt (Independent Science Based Taxonomy), tassonomia fondata su parametri rigorosi e non su valutazioni politiche o lobbistiche
L'articolo Il Wwf propone una nuova tassonomia, indipendente e innovativa proviene da Valori.
Il presidente del Cio incontra Meloni: “Khelif è una donna, faremo chiarezza”
@Politica interna, europea e internazionale
A margine dei Giochi di Parigi, la presidente del Consiglio italiana Giorgia Meloni ha avuto un incontro con il presidente del Cio Thomas Bach. I due hanno discusso del caso della pugile algerina Imane Khelif, dopo le perplessità avanzate da diversi esponenti del Governo italiano
Questa manfrina è umiliante per tutti i coinvolti.
Quelli che dimostrano di che pasta son fatti blaterando che "è un uomo", il CIO che si trova costretto a fare anche da insegnante e gli atleti colpiti da certe osservazioni burine.
Elezioni e Politica 2025 likes this.
macfranc
in reply to Poliverso - notizie dal Fediverso ⁂ • • •naturalment consigliamo agli utenti poliversity di guardare il link alla pagina correttamente formattata di Friendica:
poliverso.org/display/0477a01e…
Poliverso - notizie dal Fediverso ⁂ likes this.
reshared this
informapirata ⁂, Poliverso - notizie dal Fediverso ⁂ e nikol reshared this.
Poliverso - notizie dal Fediverso ⁂
Unknown parent • •@:sailfish: Must o don't? ⭐️ non è colpa tua, mastodon non riesce a comprendere le tabelle...
Puoi leggere qui la formattazione reale:
poliverso.org/display/0477a01e…
@Che succede nel Fediverso?
Che succede nel Fediverso? reshared this.
Simone
in reply to Poliverso - notizie dal Fediverso ⁂ • • •Poliverso - notizie dal Fediverso ⁂ likes this.
Elena ``of Valhalla''
in reply to Simone • • •Poliverso - notizie dal Fediverso ⁂ likes this.
Che succede nel Fediverso? reshared this.
Poliverso - notizie dal Fediverso ⁂
in reply to Elena ``of Valhalla'' • •@Elena ``of Valhalla'' ho provato diversi sistemi per rendere quel post compatibile con mastodon, meno invasivo possibile e leggibile. .
Mi sembra che finora non sia riuscito a trovare nessuna possibilità. Considerando che non è stato neanche pubblicato nella community di Lemmy, e non ho neanche capito perché, ho deciso di cancellarlo 🤣
@Simone
Che succede nel Fediverso? reshared this.
Elena ``of Valhalla''
in reply to Poliverso - notizie dal Fediverso ⁂ • • •Poliverso - notizie dal Fediverso ⁂ likes this.
Che succede nel Fediverso? reshared this.
Simone
in reply to Poliverso - notizie dal Fediverso ⁂ • • •Poliverso - notizie dal Fediverso ⁂ likes this.
Poliverso - notizie dal Fediverso ⁂
in reply to Simone • •@Simone ma sì, tanto a riscrivere un post meglio si fa sempre in tempo. E se non ci si riesce, vuol dire che era meglio non scriverlo... 😁
@Elena ``of Valhalla''
Che succede nel Fediverso? reshared this.